Biesse Rover 336 pirkti naudotą (330)

Sąlyga: labai geros būklės (naudotas), PC control type NC 400 No. 2 motorized through-feed conveyor belts No. 2 horizontal drilling supports Kjdpfx Afsidqf Rj Iewt No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm): 3200 Min. working width (mm): approx. 205 No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip conveyor belt Digital display of positional data (axis) Total connected load (kW): 59.1 The CNC control operates the movement (X-axis) of the horizontal drilling supports The CNC control operates the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the transport belts

Sąlyga: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Kjdsu Rc Anspfx Af Iowt Edgeband Material (edges) Thickness (min/max) mm: 0.3 – 3 Panel Thickness (min/max) mm: 10 – 60 Working Width (min/max) mm: 240 – 2700 Control: PC Base Windows / SINITRA Software Feed Speed (variable) m/min: 10 – 40 (INVERTER CNC) Cam Pitch (mm): 500 FORMATTING UNIT (for each side): - Safety milling cutter (pre-milling) AS 10 (5.8 kW) pneumatic - 2 x Chipper cutters DT 10 (5.8 + 5.8 kW) - Spraying device (for liquid non-stick agent) EDGE BANDING UNIT (for each side): - 1st Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) - 2nd Gluing unit (pre-melter with hot air) Air Force System - Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) - End trimming unit IT 90-X (0.65 kW x 2) 28 m/min, 0 – 25° - Pre-milling unit RS 10 (2 x 2 kW) - Multi-profile milling unit (CNC-controlled) RF 40 (1 x 2 kW) 0 – 25° - Multifunctional unit (radius milling and contour milling) AR 80 (0.65 kW x 2) 25 m/min ROTAX. Revolver 8+8 stations (max. 25 m/min) - Motors with automatic tool change (tools) - Multi-profile scraping unit (CNC-controlled) RB 40 (multi-profile) - Flat scraper unit RC 20 + spraying units (for polishing fluid) - Buffing unit SZ 30 (0.37 kW x 2)

Sąlyga: labai geros būklės (naudotas), Double-sided – First machine in a processing line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness with rolls (min/max) mm 0.3 – 3 Panel thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Control system: PC Base Windows / Software PC / SINTRA Feed speed (adjustable) m/min 10 – 40 (C.N. INVERTER) FORMAT PROCESSING (per side): Spray unit (for liquid release agent) No. 2 hoggers DT 10 (5.8 kW x 2) Empty space EDGEBANDING SECTION (per side): 1st gluing unit (Hot Melt + premelter) SP 30 (High Melt + Edge Control EC 40) 2nd gluing unit (premelter with hot air) Air Force System Kwedpfxou Rc Hyo Af Iot Edge pressure zone (CNC controlled) + edge magazine for rolls (No. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (2 x 1 kW) 0°-25° No. 1 universal milling unit for grooving/rebating/profiling EB 60 (1 x 5 kW) - ISO 30 motor Multi-profile scraper unit (CNC controlled) RB 40 Flat scraper unit RC 20 Spray unit (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Sąlyga: labai geros būklės (naudotas), Electronic machine, CNC-controlled, PC control unit type NC 500 – Tooling System software No. 2 powered conveyor belts – feed speed (m/min) approx. 35–75 No. 2 horizontal drilling supports Drilling units per horizontal support (qty) 2 x 1.8 HP Max. working width (mm) 3200 – Min. working width (mm) 215 No. 7 lower vertical drilling supports Kedpfx Afjhvi Duo Iewt Drilling units per lower vertical support (qty) 2 x 1.8 HP No. 3 upper vertical drilling supports Spindles per upper drilling support (qty) 2 x 1.8 HP No. 5 upper vertical workpiece clamps No. 2 screw conveyors (endless) for chip extraction CNC controls movement (X-axis) of horizontal drilling supports CNC controls movement (Hv) of the 2 horizontal drilling supports CNC controls movement (X-axis) of vertical drilling supports CNC controls movement (axes Y1 and Y2) of the drilling units CNC controls movement (Y-axis) of the stops CNC controls movement (X-axis) of the workpiece clamps CNC controls movement (X-axis) of the conveyor belts The CNC controller manages all programming of automatic work cycles.

Sąlyga: labai geros būklės (naudotas), PC control unit type NC 400 (with software for managing work cycles) No. 2 through-feed motorised conveyor belts Max. working width (mm): 3200 - Min. working width (mm): approx. 205 No. 2 horizontal drilling supports No. 2 drilling units on each horizontal drilling support Spindles per horizontal drilling unit (No.): 11 No. 4 lower vertical drilling supports No. 2 drilling units on each lower vertical drilling support No. 2 upper vertical drilling supports Kwjdpfx Afsi D D Tfs Ijt No. 2 spindles for each drilling unit of the upper drilling supports No. 2 upper vertical workpiece clamps No. 2 endless screws for chip removal Digital position display (axis) Total connected load (kW): 25 The CNC controls the (X-axis) movement of the horizontal drilling supports. The CNC controls the (Y-axis) movement of the stops. OPTION: Front loading system (for narrow parts: Min 60mm - Max 260mm)

Sąlyga: labai geros būklės (naudotas), Flexible N.C. Automatiklinie zum Bohren, Fräsen und Einpressen von Beschlägen. Numerische Steuerung mit Albatros-Software. Bestehend aus: KZ2046) Einlauf mit Igel (Puffer-)Speicher (18 Positionen) Kedpfx Afsidmkrs Ijwt KZ2047) Übergabe mit motorisiertem Förderband KZ2048) CNC Modell Vector GLR-X 30-13 KZ2049) Übergabe mit motorisiertem Förderband KZ2050) CNC Modell Vektor XK 40-13 KZ2051) Übergabe mit motorisiertem Förderband KZ2052) CNC Modell Idrak 3 KZ2053) Übergabe mit motorisiertem Teppichband mit 90° Umlenkung auf einem Rollentisch KZ2054) Rollenförderer mit ebenfalls motorisierten Bändern (zum Bewegen der Platten um 180° zu den Montagelinien)

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007849, Didžiausias plokštės plotis: 1000 mm Didžiausias plokštės ilgis: 2200 mm Konvejerio ilgis: 9000 mm Kwedpfx Aewkfzzjf Iot Grąžinimo įrenginys briaunų klijavimo staklėms: dešinėje pusėje

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Naudojamas ilgio diapazonas (X ašis) panelėms min./maks.: 200 – 3200 mm Naudojamas plotis (Y ašis) panelėms min./maks.: 35 – 900 mm Naudojamas storis (Z ašis) panelėms min./maks.: 8 – 60 mm 1 vertikalus elektroverpstas (4,5 kW) ISO 30 1 apvalus pjūklas (Ø 120 mm) 10 nepriklausomų vertikalių gręžimo velenų 6 nepriklausomi horizontalūs gręžimo velenai (4 X ašyje ir 2 Y ašyje) Kedex Rcy Ijpfx Af Iewt Lazerinio nuskaitymo sistema Skaitmeninis valdymas (bSolid programinė įranga)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1000004052, Įranga: Tipinė plokštelė prieinama, For sale: Biesse Stream B1 8.5 edgebander with return table. The edgebander is in continuous use – we edge band with PUR and AIR FORCE technologies. Feed speed: 1-25 m/min. Edgebanding methods: - AIR FORCE - PUR - EVA Maximum height of edged elements: 40 mm Maximum width of elements on return table: 1300 mm Line composition: - 2 milling heads, height 44 mm - EVA/PUR application unit - AIR FORCE unit Kwodpfx Aou Suh Ssf Ijt - end trimming saws - pre-milling profile cutters - corner rounding units - grooving saw - profile scrapers - flat scrapers - polishers Edge magazine for 12 rolls. For further information, please contact us.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, STREAM SB LINE (WINNER W1 + STREAM C SB1/SB2 + SP30 + TURNER) Year of manufacture: 2021 Technical condition: very good Panels: particleboard, MDF, HDF, plywood, blockboard, solid wood. Coatings: ABS / PVC / laminate / veneer / lacquer / melamine. Shape: rectangular, without grooves or holes. Roughness: average < 5 µm, maximum < 35 µm. Operating temperature of components: < 50 °C. Minimum density: particleboard > 650 kg/m³, MDF > 750 kg/m³. FEEDER / STACKER WINNER W1 Element length: min 300 mm. Element width: min 240 mm (double row: min 120+120 mm), max 1200 mm (double row: max 600+600 mm). Element thickness: 10–60 mm. Element weight: up to 100 kg. Element flatness: ±1 mm/m (maximum total ±2 mm over the entire length). Uniform stack height on conveyor (H=250 mm): min 300 mm, max 1500 mm. High-speed set speeds: Y axis (carriage) 210 m/min, Z axis (frame with suction cups) 130 m/min (+ throughput ~2 cycles/min). Base capacity: 15 cycles/min (depending on composition/weight/spacings). Compressed air consumption: 950 Nl/min. Installed power: 16 kW. Option: powered panel separator – air 1050 Nl/min, power 8 kW. Kodew R Savspfx Af Iowt DOUBLE-SIDED EDGE BANDING MACHINES STREAM C SB1 (first pass) Panel overhang beyond conveyor: 35 mm. Panel thickness: 10–60 mm. Edge thickness: 0.3–3 mm. Edge height: 15–65 mm. Table height: 950 mm. Panel width: 240–1200 mm (SB1 TWIN: min 100 mm; SB1 SOFT: min 270 mm). SOFT profile depth at 50 mm overhang: 20 mm (greater depth requires change of overhang/add-ons). STREAM C SB2 (second pass) Panel overhang beyond conveyor (fixed): 35 mm (SB2 SOFT: 50 mm). Panel thickness: 10–60 mm. Edge thickness: 0.3–3 mm. Edge height: 15–65 mm. Table height: 950 mm. Distance between pushers: 500 mm. Panel width: 240–1200 mm (SB2 SOFT: min 270 mm). Panel length: 240–2700 mm. SOFT profile depth at 50 mm overhang: 20 mm (greater depth requires change of overhang/additional tables). GLUING UNIT SP30 Edge thickness: 0.3–3 mm. Max shear cut cross-section: 135 mm² (3 × 45). Panel thickness: 10–60 mm. Edge height: 15–65 mm. Minimum edge length: 250 mm. Glue pot: 1.3 kg. Glue tank: 11 kg. Application capacity: 16 kg/h. Edge roll diameter: 800 mm. EDGE TRIM LENGTH CONTROL (options) EC40: minimum length 200 mm, speed 40 m/min, tolerance ±3 mm. EC60: minimum length 200 mm, speed 60 m/min, tolerance ±5 mm. TURNOVER DEVICES TURNER PT1 / PT2 Element length: 300–3200 mm. Element width: 200–1200 mm. Element thickness: 10–80 mm. Maximum element weight: 100 kg. Panel flatness tolerance: 1 mm/linear metre. Base flatness tolerance (area 8000 × 3000 mm): ±10 mm. Compressed air requirement: 250 L/min. Installed power: 7 kW. Assembly and commissioning available at extra charge.

Sąlyga: naudotas, Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, BIESSE Edgebanding Machine AKRON 1440-A Automatic single-sided edgebanding machine for applying and processing straight edges using coil material (melamine, PVC, ABS, veneer) and strip material (solid wood, HPL, sliced veneers, etc.). • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness: 10–60 mm Workpiece thickness with MFU aggregate (profile-dependent): 10–35/60 mm Edge height: 14–64 mm Edgebanding thickness (coil): 0.4–3 mm Edgebanding thickness (strip)*: 0.4–10 (12) mm Workpiece overhang: 25 mm Minimum panel length: 140 mm Minimum width (at 140 mm length): 85 mm Minimum width (at 250 mm length): 50 mm Feed speed: 12 m/min Extraction*: 8x port Ø100 mm Compressed air connection: 7 bar Glue pot capacity: approx. 2 kg *Depending on selected aggregates - GLUING UNIT VC-511 Applies hot-melt adhesive to the workpiece, feeds the edge material onto the workpiece, automatically cuts coil material, and presses the edge precisely onto the workpiece, ensuring perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs at 0° to 15° angles. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of synthetic material edges up to a maximum thickness of 3 mm. Kodpfx Asxzb Iiof Ijwt - PRE-MILLING UNIT RT02 Pre-mills the workpiece before adhesive application. Two high-frequency motors, each 1.8 kW, 12,000 rpm. - SCRAPING UNIT RB02 For post-processing thick PVC/ABS edges. - FLAT SCRAPER RC02 Unit for removing excess glue at the joint between edge and panel. Equipped with tracing rollers and a flat knife with electronic engagement. - BUFFING UNIT SZ02 For cleaning and polishing the workpiece edge using fabric buffing wheels. The unit adjusts automatically to the workpiece thickness. - SPRAY SYSTEM FOR ANTI-ADHESIVE AGENT ADZ02 Precision application of anti-adhesive agent via injectors, numerically controlled. - KIT PRO-GLUE The PRO-GLUE kit includes: • TEKNO-GLUE system for optimal adhesive application via: - Controlled glue roller contact. - Automatic retract in case of feed stop. - Automatic ON/OFF of gluing section. • REVERSE system for switching the glue roller between co-rotating and counter-rotating modes. Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue on machines equipped for EVA. NC Axis for Fine Trimming Unit Kit for automatic adjustment of tracing rollers and tool to match edge type and thickness. Adjustment via control system. Pair of multi-profile cutters for fine trimming: bevel 25°, R=2 mm + R=1 mm, and straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of tracer to match edge thickness. Adjustment via control system. Function for processing corners only. NC Axis for Scraping Unit Kit for automatic adjustment of tracing rollers and tool to match edge type and thickness. Adjustment via control system.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 80709, plokštės aukštis: 45 mm, tuščias svoris: 2 900 kg, darbinis greitis: 333 mm/s, Įranga: CE žymėjimas, TECHNINĖS DETALĖS Maksimali plokštės storis: 45 mm Juostos storis: 13-60 mm Kraštinės medžiagos storis ritiniuose maks.: 3 mm Minimali plokštės plotis: 50 mm Minimali ilgis: 150 mm Kwsdpfsxuqufox Af Iet Darbo greitis: 10 - 20 m/min ĮRANGOS DETALĖS Elektros duomenys Įtampa: 400 V Dažnis: 50 Hz Matmenys ir svoris Matmenys (I x P x A): 4.950 mm x 1.700 mm x 1.530 mm Svoris: 2.900 kg ĮRANGA Klijų puodas VC 700 Pjovimo agregatas 701 Kraštų frezavimo agregatas RS 700 Kampų užapvalinimas CR 200 Pakreipiamas kraštų frezavimo agregatas + nuožulna RI 700 Kompaktiška kraštų grandiklis RBK501 Šepečiai SP700 Kraštų šlifavimo agregatas LV 700 Šildomas įvedimo kreiptuvas PLC valdymas Plokštės atraminis kreiptuvas Ritinių laikiklis didelio skersmens Kraštų pjovimo įrenginys 3 mm storio ritininiams kraštams CE ženklinimas

Sąlyga: naudotas, Gamybos metai: 2003, BIESSE FDT THROUGHFEED DRILLING MACHINE price: €20,000 / net Working area along X-axis: max 3200 mm min. 215 mm Workpiece thickness: max 65 mm min. 9 mm Work table height from floor: 900 mm 2 pcs horizontal heads, each with 2 drilling heads with 11 spindles, activated by a 1.1 kW (1.5 HP) motor. Each unit includes: • 2 drilling heads with 11 spindles each, equipped with quick-change system at 32mm pitch, without holders. Each head is powered by a 1.1 kW (1.5 HP) motor. • Quick manual positioning of the front heads (Y1) along a leadscrew rail using a hand crank for accurate adjustment. • Pneumatic stroke activation with scale, for manual setting of drilling depth. • Switch for manual stroke activation. • Pneumatic setting of drilling speed. • Maximum distance between the first and last spindle of the horizontal head: 704 mm • Maximum stroke of the horizontal head along the Z-axis: 5-40 mm 5 pcs lower vertical drilling head Width 96 mm, equipped with 2 motors (each 1.8 HP). Electronically activated drilling cycle. The head is equipped with: • Quick-change device for drill heads with 90° rotation capability. • Rapid positioning of heads along the beam (X-axis) via rack-and-pinion rail with gear wheel and position-indicating encoder; 2 roller guides; mechanical locking, pneumatic release. • Quick positioning of each drilling head in the transverse direction (Y-axis) by ball screw and position-indicating encoder; 1 roller guide; mechanical locking – pneumatic release. Ksdpfxowpq Hms Af Ijwt • Electronic activation via brushless servomotor; drilling parameter control via NC.

Sąlyga: geras (naudotas), Gamybos metai: 1992, • Galvutė: 21 grąžto velenai • Klijų pistoletai: 6 Kwjdpfxjrcfis Af Ist

Sąlyga: naudotas, Gamybos metai: 1997, - Edge banding unit - Cross-cut unit - Milling unit - Fine milling unit Kwjded Inktjpfx Af Iet - Scraper - Buffing unit

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008030, Priklijuotos briaunos tipas: plona briauna, stora briauna, masyvo mediena Kwodpfewvq Hgjx Af Iet Klijavimo sistema: EVA, PUR, karštas oras Sujungimo frezavimas: taip Daugiafunkcinis agregatas: taip Maks. padavimo greitis: 25 m/min Maksimali plokštės storis: 60 mm Darbo agregatai: 8 vnt.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007848, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Jointing unit: yes Multi-function unit: yes Max. feed speed: 20 m/min Kwsdpfx Afewkrqpo Ist Maximum panel thickness: 60 mm Working units: 8 pcs

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007869, Didžiausias plokštės plotis: 3200 mm Didžiausias plokštės ilgis: 800 mm Kwodewimzyepfx Af Iot Agregatų skaičius: 5 Šoniniai horizontalūs mazgai: taip

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008027, Maks. apdirbamas plotis: 1350 mm Kodpfx Afjwvq E As Iowt Min. apdirbamas storis: 200 mm Darbo stalas: fiksuoto aukščio Vakuuminis transporteris: taip Darbo agregatų skaičius: 4 vnt.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2019, Parduodu briaunų klijavimo stakles Biesse JADE 240, pagaminimo metai 2019. Specialus pasiūlymas: įrenginys beveik NAUJAS! Konfigūracija: Įleidimo zona reguliuojama rankiniu būdu Plokštės galų frezavimas reguliuojamas pneumatiniu būdu Briaunos klijavimas reguliuojamas rankiniu būdu 2 klijų talpos EVA klijams Presavimo zona reguliuojama rankiniu būdu Pjovimo pjūklas reguliuojamas pneumatiniu būdu Spindulio frezavimas reguliuojamas rankiniu būdu Apvalinimo agregatas su 2 varikliais reguliuojamas rankiniu būdu Spindulio gramdiklis reguliuojamas rankiniu būdu Plokštuminis gramdiklis reguliuojamas pneumatiniu būdu Poliravimo šepečiai Priekinis separatoriaus purškiklis Centrinis tepimas Viršutiniai padavimo volai Kwedpfx Afoxncrvj Ist Rankomis reguliuojamas aukštis Medžiagos aukštis 10-60 mm Briaunos medžiagos storis 0,4-8,0 mm Padavimo greitis 12 m/min. Priklijuota tik 9250 m. Įrenginys beveik NAUJAS! CE žymėjimas. Pilna dokumentacija ir CD įtraukta. Labai puiki būklė! Galima įsigyti iš karto!

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007641, Type of applied edge: thin edge, thick edge, solid wood Glue system: EVA, PUR Edgebanding machine: Machine 1 Max. panel width: 1200 mm Working units, right side: 8 pcs Kedpfx Afowuz R Hs Iowt Working units, left side: 9 pcs

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007913, Uždedamos briaunos tipas: plona briauna, stora briauna Klijavimo sistema: EVA, karštas oras Sujungimo frezavimas: taip Daugiafunkcis agregatas: taip Ksdpfxswkf Dve Af Ijwt Didžiausias plokštės storis: 60 mm Darbo agregatai: 7 vnt.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007870, Maks. plokštės plotis: 3200 mm Maks. plokštės ilgis: 800 mm Agregatų skaičius: 2 Purkštuvų skaičius: 12 Kodpfx Afjwimz Hj Iswt

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 006370, Type of applied edge: thin edge, thick edge Kedpjl Txw Hefx Af Iswt Adhesive system: EVA Jointing milling: yes Multifunctional unit: yes Top milling unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 12 pcs

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007687, Type of attached edge: thin edge, thick edge, solid wood Glue application system: EVA, hot air Jointing milling: yes Ksdpfx Ajwuz Npjf Iewt Multi-functional unit: yes Maximum feed speed: 18 m/min Maximum panel thickness: 60 mm Working units: 7 pcs