Biesse Rover 321 R pirkti naudotą (322)

Būklė: naudotas, Gamybos metai: 2020, Naudota mašina Pagaminimo metai: 2020 Įranga: - Agregatų valdymas per lietimui jautrų ekraną - Sujungimo frezavimo agregatas - Klijų talpa - Nupjovimo agregatas - Spindulio frezavimo agregatas - Spindulio gremžtuko agregatas - Plokštuminio gremžtuko agregatas - Poliravimo agregatas - Purškimas priekyje ir gale Vieta: Reino kraštas-Pfalcas Prieinamumas: pagal susitarimą Pardavimas kliento vardu. Duomenys be garantijos. Crsdpfx Aox Enqusf Aeb

Būklė: naudotas, Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, BIESSE Edgebanding Machine AKRON 1440-A Automatic single-sided edgebanding machine for applying and processing straight edges using coil material (melamine, PVC, ABS, veneer) and strip material (solid wood, HPL, sliced veneers, etc.). • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness: 10–60 mm Workpiece thickness with MFU aggregate (profile-dependent): 10–35/60 mm Edge height: 14–64 mm Edgebanding thickness (coil): 0.4–3 mm Edgebanding thickness (strip)*: 0.4–10 (12) mm Workpiece overhang: 25 mm Minimum panel length: 140 mm Minimum width (at 140 mm length): 85 mm Minimum width (at 250 mm length): 50 mm Feed speed: 12 m/min Extraction*: 8x port Ø100 mm Compressed air connection: 7 bar Glue pot capacity: approx. 2 kg *Depending on selected aggregates - GLUING UNIT VC-511 Applies hot-melt adhesive to the workpiece, feeds the edge material onto the workpiece, automatically cuts coil material, and presses the edge precisely onto the workpiece, ensuring perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs at 0° to 15° angles. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of synthetic material edges up to a maximum thickness of 3 mm. - PRE-MILLING UNIT RT02 Pre-mills the workpiece before adhesive application. Two high-frequency motors, each 1.8 kW, 12,000 rpm. - SCRAPING UNIT RB02 For post-processing thick PVC/ABS edges. - FLAT SCRAPER RC02 Unit for removing excess glue at the joint between edge and panel. Equipped with tracing rollers and a flat knife with electronic engagement. - BUFFING UNIT SZ02 For cleaning and polishing the workpiece edge using fabric buffing wheels. The unit adjusts automatically to the workpiece thickness. - SPRAY SYSTEM FOR ANTI-ADHESIVE AGENT ADZ02 Precision application of anti-adhesive agent via injectors, numerically controlled. - KIT PRO-GLUE The PRO-GLUE kit includes: • TEKNO-GLUE system for optimal adhesive application via: - Controlled glue roller contact. - Automatic retract in case of feed stop. - Automatic ON/OFF of gluing section. • REVERSE system for switching the glue roller between co-rotating and counter-rotating modes. Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue on machines equipped for EVA. NC Axis for Fine Trimming Unit Kit for automatic adjustment of tracing rollers and tool to match edge type and thickness. Adjustment via control system. Pair of multi-profile cutters for fine trimming: bevel 25°, R=2 mm + R=1 mm, and straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of tracer to match edge thickness. Adjustment via control system. Function for processing corners only. NC Axis for Scraping Unit Kit for automatic adjustment of tracing rollers and tool to match edge type and thickness. Adjustment via control system. Codpexzb Iijfx Af Asrb

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2023, mašinos/transporto priemonės numeris: 1000063009, Funkcionalumas: visiškai funkcionalus, briaunos storis (maks.): 5 mm, transporto ilgis: 3 800 mm, transporto plotis: 700 mm, transporto aukštis: 1 700 mm, TECHNINĖS DETALĖS Vienetų skaičius: 5 Maksimali briaunos juostos storis: 5 mm Maksimalus plokštės storis: 50 mm ĮRENGINIO DETALĖS Dokumentacija prieinama: Ne CE žymėjimas: Taip Serijos numeris: 1000063009 Įtampa: 400 V Credow Tzifepfx Af Aeb Srovės sunaudojimas: 12,3 A Galia: 6,8 kW Transportavimo matmenys: 3.800 mm x 700 mm x 1.700 mm (i x p x a) Transportavimo svoris: 1.000 kg Transportavimo pakuotės: 1

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 50 kg, ruošinio aukštis (maks.): 900 mm, ruošinio ilgis (maks.): 2 600 mm, gręžimo gylis: 25 mm, veleno greitis (maks.): 24 000 aps./min, TECHNICAL DETAILS Workpiece Dimensions Length min: 200 mm Length max: 2,600 mm Height min: 35 mm Height max: 900 mm Thickness min: 8 mm Thickness max: 60 mm Maximum panel weight: 50 kg Length with extension: max. 3,200 mm Drilling Head Unit BH17 Vertical chucks: 10 Horizontal double chucks: 3 Circular saw blade diameter: 120 mm Crsdpfxow Hqrks Af Ajb Max. working depth: 25 mm Saw blade thickness: 4 mm Rotation: right-hand Electrospindle Power at 12,000 – 15,000 rpm (S1): 5.5 kW Speed range: 1,000 – 24,000 rpm Rotation: right-hand EQUIPMENT BSolid Software – 3D CAD-CAM design program (simulation and management of processes for machining and drilling centers, option to select additional modules for extended functions according to production requirements) Note: Disassembly and loading can be provided by a Biesse service partner for €2,000.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, KuKa robotas su Biesse RBO krovimo įranga. Pagaminta Biesse - RBO. - Referencinio taško nustatymo stalas - 4 metrų ilgio sija su vežimėliu judėjimui X kryptimi, lygiagrečiai staklių X ašiai - Schmaltz vakuuminė sistema Crodpfx Afjxy Afts Aeb - Atskira elektros spinta robotui ir kita elektros spinta RBO krovimo įrangai. Ši robotinė celė iki 2025-11-10 buvo prijungta prie Biesse Rover staklių, skirta plokščių krovimui nuo ir prie staklių. Visos roboto funkcijos 100% veikia. Parduodama dėl gamyklos uždarymo. Žiūrėkite ir pridedamą vaizdo įrašą. Rekman Maskin & Service – CNC staklių aptarnavimas nuo 1986 m.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2012, mašinos/transporto priemonės numeris: 21090, Funkcionalumas: visiškai funkcionalus, X ašies padavimo greitis: 25 m/min, bendras svoris: 3 800 kg, valdiklių gamintojas: SINTRA, Disassembly and loading can be handled by the seller! TECHNICAL DETAILS Feed speed: 25 m/min 2nd pass: 18 m/min MACHINE DETAILS Control system: SINTRA Weight: 3,800 kg Air supply: 7 bar Extraction volume: 30 m/sec EQUIPMENT CNC-adjustable working height Infeed stop controlled via CNC Side stop with idler rollers for panel support Upper pressure unit with motorised belt Anti-adhesive unit Pre-milling unit Panel edge preheating unit with lamps Glue application system for EVA adhesive Pre-melter for EVA adhesive 1 + 5 pressure rollers End trimming unit with 2 motors and automatic bevel adjustment Credpfxeydc Sco Af Aob Coarse milling Fine milling unit with 2 swivelling motors and automatic adjustment via CNC-controlled servomotors Multifunction unit (fine milling + corner rounding) with 2 motors and CNC automatic adjustment R1 R2 edge scraping unit (NC-pneumatic positioning) Grooving unit Glue scraping unit with anti-adhesive spraying device Polishing unit with 2 motors for panel cleaning

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, mašinos/transporto priemonės numeris: 55595, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 000 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 60 mm, bendras svoris: 3 000 kg, valdiklio modelis: Xp 600, TECHNINĖS DETALĖS Darbinė sritis X ašis: 3.000 mm Darbinė sritis Y ašis: 1.000 mm Darbinė sritis Z ašis: 60 mm ĮRENGINIO DETALĖS Valdymas: Xp 600 su Biesse Works programine įranga Svoris: 3.000 kg ĮRANGA Automatinė pakrovimo sistema su motorizuota juostine konvejerio sistema 2 spaustuvai plokštės fiksavimui ir transportavimui 1+1 vertikalus elektros variklis (apatinis ir viršutinis) su 3 ašimis 1+1 nepriklausomas pjūklas (apatinis ir viršutinis) 29 + 29 nepriklausomi gręžimo velenai vertikaliam gręžimui X ir Y kryptimis (viršuje ir apačioje) 10 + 10 nepriklausomų velenų horizontaliam gręžimui X ir Y kryptimis (viršuje ir apačioje) Cedpfxeydk Rmj Af Aorb Automatinė iškrovimo sistema su motorizuota juostine konvejerio sistema

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, mašinos/transporto priemonės numeris: 77503, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 60 mm, X ašies padavimo greitis: 25 m/min, bendras svoris: 6 510 kg, valdiklių gamintojas: SINTRA, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Feed speed max.: 25 m/min MACHINE DETAILS Control: Sintra Credoydidrspfx Af Aob Weight: 6,510 kg EQUIPMENT Sanding unit Coil holder magazine with 2 positions and automatic edge change via CNC Adhesive unit for EVA hot-melt glue with preheating device and glue pot Preparation for adhesive unit for PUR glue Edge pressure group for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with 2 motors and automatic tilt adjustment Filling unit with 2 vertically stacked motors Edge smoothing unit with 2 tiltable motors Multifunctional 4-motor corner rounding unit (smoother + corner rounding) with numerical control and automatic adjustment Anti-adhesion group Adjustable edge scraping group Glue saver unit Oscillating brush group Electronically adjustable working height Motorized rubber band with increased pressure Motorized and electronically adjustable panel guide Side roller conveyor with idler rollers for panel support

Būklė: labai geros būklės (naudotas), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE, also suitable for NARROW PARTS min. 65 mm, featuring high-speed conveyor technology, No. 3 CNC-controlled through-feed drilling machines (one designed for lateral drilling along the longitudinal direction), and No. 1 through-feed cut-off saw (Splitter) Comprising the following machines: W05024A) Loading system (gantry) "RBO (BIESSE)" model Winner C W05024B) 1st single-sided sizing and edge banding machine (left) "BIESSE" model Stream SB1 TWIN W05024C) 2nd single-sided sizing and edge banding machine (right) "BIESSE" model Stream SB1 TWIN W05024D) 1st rotation unit (90° LONGITUDINAL-TRANSVERSE) "RBO (BIESSE)" model GPK-1 W05024E) Double-sided sizing and edge banding machine "BIESSE" model Stream SB2 / 11.0 W05024F) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN W05024G) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN W05024H) 2nd rotation unit (90° TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" model GPK-2 W05024I) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (for lateral drilling in longitudinal direction) Crodpfxotr Envs Af Ajb W05024J) Through-feed cut-off saw (Splitter) "TECNOLOGICA" W05024K) Dust removal and cleaning machine "WANDRES" W05024L) Stacking system (gantry) "RBO (BIESSE)" model Winner SC

Būklė: labai geros būklės (naudotas), COMPLETE 4-SIDE EDGE PROCESSING AND EDGE BANDING LINE, max. working width 3000 mm, equipped with automatic feeding and stacking system, consisting of the following machines: X03001A) Feeding gantry (with 2 loading stations) "RBO" Model Winner C 3200 X03001B) 1st double-sided formatting and edge banding machine "BIESSE" Stream SB 1 - 7.5 X03001C) Workpiece rotation device (90° LONGITUDINAL-CROSS) "RBO" Model GPK 1 Codpoi Rbg Tsfx Af Aerb X03001D) 2nd double-sided formatting and edge banding machine "BIESSE" Stream SB 2 - 11 X03001E) Workpiece rotation device (90° CROSS-LONGITUDINAL) "RBO" Model GPK 2 X03001F) Stacking gantry (with 2 unloading stations) "RBO" Model Winner S 3200

Būklė: visiškai atnaujintas (naudotas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, equipped with fast automatic handling system. Comprising the following machines: A) LOADING STATION “RBO” Winner C 3200 with dual pick-up and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for panel stack infeed to the loader. B) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° C) 1st AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units D) 2nd AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units E) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° Cjdpfx Asdfgg Isf Asrb G) UNLOADING STATION “RBO” Winner SC 3200 with dual pick-up, double stacking station, and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for outfeed of panel stacks from the unloader.

Būklė: labai geros būklės (naudotas), COMPLETE DOUBLE-SIDED EDGE-AND-PROFILE PROCESSING LINE (including SOFTFORMING), with through-feed drilling machines, splitter, and high-speed automated conveyor technology. Configured as follows: A) Feeding station – stacking system (gantry) "RBO (BIESSE)" Model Winner C (1) B) 1st double-sided edge-banding and profiling machine "BIESSE" Model Stream SB1 11.0 Softforming C) 1st rotation station (90° LONGITUDINAL-TRANSVERSE) "RBO (BIESSE)" Model GPK-1 D) 2nd double-sided edge-banding and profiling machine "BIESSE" Model Stream SB2 9.5 E) 2nd rotation station (90° straight or TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" Model GPK-2 F) CNC through-feed drilling machine "BIESSE" Techno FDT CN (with 2 horizontal drilling supports, 6 lower vertical drilling supports, and 3 upper vertical drilling supports) G) CNC through-feed drilling machine "BIESSE" Techno FDT CN (with 2 horizontal drilling supports, 6 lower vertical drilling supports, and 3 upper vertical drilling supports) H) 3rd rotation station (90° straight or TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" Model GPK-3 Cjdpfxottgy Hs Af Ajrb I) Longitudinal panel saw (splitter) "GM (for BIESSE)" Model Split 4-84 LT L) Destacking station – stacking system (gantry) "RBO (BIESSE)" Model Winner SC (2)

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 2 horizontal upper support beams (on which the carriage glides) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal metal arms with adjustable vacuum suction cups OPTIONAL: No. 2 external roller conveyors (floor-mounted) for loading stacks of panels onto the loading station No. 1 external motorized roller conveyor (for receiving panels from the loading station) Crodpoflc T Sofx Af Aob Separate electrical control cabinet Electronic control system Perimeter safety fence with safety mats Total connected load: 17.7 kW Operating capacity (cycles / min): approx. 16-20 Panel thickness (min/max) mm: approx. 10-50 Min. panel dimensions mm: approx. 250 x 320 Max. panel dimensions mm: approx. 1200 x 3000

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED DESTACKER - Bridge design Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (with carriage running on it) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal metal arms with adjustable vacuum suction cups No. 2 external roller conveyors for stacking of panels from the destacker No. 1 external motorized roller conveyor from destacker, also with belt drive for 90° panel transfer. Dimensions: 7168 mm (approx.) Separate electrical control panel OMRON electronic control system Perimeter safety fence with safety mats Operating capacity (cycles/min): approx. 16 - 20 Panel thickness (min/max): approx. 10 – 50 mm Min. panel size: approx. 250 x 320 mm Max. panel size: approx. 1200 x 3200 mm Codpfxod Rg Dzs Af Aorb Total connected load: 20.8 kW

Būklė: labai geros būklės (naudotas), GANTRY LOADER with DOUBLE LOADING STATION Vacuum system (with its pump) No. 4 vertical columns supporting the upper crossbeam No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) Crsdpfx Asd Rg Dpsf Ajb No. 1 motorized trolley to which horizontal arms are attached No. 2 adjustable horizontal metal arms with vacuum suction cups No. 2 floor-mounted rollers for feeding panel stacks into the Loader No. 1 motorized roller table (delivering panels to the Unloader), with additional cross motorized conveyor belts (at 90°). Dimensions approx. 7,232 mm Separate electrical and control panel OMRON electronic controls Perimeter safety and protection metal fences Working capacity (cycles/minute): approx. 16 - 20 Minimum/maximum board thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1,200 x 3,200 mm Installed power: 23.3 kW

Būklė: labai geros būklės (naudotas), ONE-SIDED DESTACKING STATION - Upper traverse, horizontally shiftable by 180° - Console table with vacuum clamps - Lift table (internal) with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operating panel - External roller conveyor for transporting the stack of sheets from destacking - External driven roller conveyor from destacking, optionally with belt for 90° transfer of sheets Crsdpfx Afjcggy Ss Ajb - Operating capacity (cycles/min): 12-15 - Plate thickness (min/max) mm: 10 - 40 - Min. plate dimensions mm: 250 x 320 - Max. plate dimensions mm: 1200 x 3000 - Total connected load Kw: 10

Būklė: labai geros būklės (naudotas), CNC-controlled (automatic) drilling and dowel insertion line, consisting of: VZ0250A) FEEDING STATION "RBO" Tornado C 1300, with powered roller conveyor VZ0250) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT, with CNC - 2 continuous powered belts, feed speed up to 75 m/min - 2 horizontal drilling units (each with 2 drill heads, 1.8 kW each, with 22 drilling spindles each) - 4 lower drilling units (each with 2 split and reversible drill heads, 1.8 kW each, with various drill heads) - 3 upper drilling units (each with 2 split and reversible drill heads, 1.8 kW each, with various drill heads) - 3 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal Cjdpfod Nviqjx Af Asrb CNC control NC 500 for both machines VZ0250C) AUTOMATIC DRILLING AND DOWEL INSERTION MACHINE "BIESSE" Techno SDT, with CNC - 2 continuous powered belts, feed speed up to 75 m/min - 2 horizontal drilling units (each with 6 horizontal units – gluing and dowel inserting tools) - 2 lower drilling units (each with 2 split and reversible drill heads, 1.8 kW each, with various drill heads) - 2 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal VZ0250D) BRUSHING MACHINE "PIZZIGALLI" Model GP 11 VZ0250E) DESTACKING STATION "RBO" Tornado SC/FE 1300, with powered roller conveyor

Būklė: labai geros būklės (naudotas), CNC-controlled Throughfeed Drilling and Dowel Insertion Line (3 machines) J06031) THROUGHFEED DRILLING MACHINE "BIESSE" KERNEL, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads of 2.3 HP and 11 drilling spindles per head) - No. 6 lower drilling supports (each with 2 split and reversible drilling heads of 2.3 HP and various drilling heads per support) - No. 6 upper drilling supports (each with 2 split and reversible drilling heads of 2.3 HP and various drilling heads per support) - No. 6 upper vertical workpiece clamps + No. 2 continuous screws for chip removal J06032) THROUGHFEED DRILLING MACHINE "BIESSE" KERNEL, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads of 2.3 HP and 11 drilling spindles per head) - No. 6 lower drilling supports (each with 2 split and reversible drilling heads of 2.3 HP and various drilling heads per support) - No. 6 upper drilling supports (each with 2 split and reversible drilling heads of 2.3 HP and various drilling heads per support) - No. 6 upper vertical workpiece clamps - No. 2 continuous screws for chip removal J06033) THROUGHFEED DRILLING MACHINE "BIESSE" KERNEL, with CNC - No. 4 lower drilling supports (each with 2 split and reversible drilling heads of 2.3 HP and various drilling heads per support) - No. 4 upper vertical workpiece clamps - No. 2 continuous screws for chip removal Credpeg Urn Ejfx Af Asb CNC Control (software Tooling System + Woodmaster) CNC controls the movement (X-axis and Hv) of the 2 horizontal drilling supports CNC controls the movement (X-axis) of the vertical drilling supports CNC controls the movement (axes Y1 and Y2) of the drilling units + (Y-axis) of the stops CNC controls the movement (X-axis) of the workpiece clamps CNC controls the movement (X-axis) of the conveyor belts

Būklė: labai geros būklės (naudotas), ONE-SIDED DESTACKING STATION - Upper traverse transversely movable by 180° (horizontal) Crodpfx Afod Tyvxj Ajb - Console table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Front protective fence, movable - Separate control cabinet and operator panel - External roller conveyor for stacking panels from destacking unit - External driven roller conveyor from destacking unit, also with belt for transfer at 90° angle of the panels - Operating capacity (cycles/min): 12-15 - Panel thickness (min/max) mm: 10 - 40 - Min. panel dimensions mm: 250 x 320 - Max. panel dimensions mm: 1200 x 3000 - Total connected load kW: 11

Būklė: labai geros būklės (naudotas), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Crodpju Tg Uqefx Af Aeb Edging material (edge) thickness (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 – 60 Working width (min/max) mm: 240 – 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam spacing (mm): 500 FORMAT PROCESSING (for each side): - Safety cutter (pre-milling): AS 10 (5.8 kW) - 2 x Chipper DT 10 (5.8 + 5.8 kW) - Spray system (for liquid anti-adhesive) EDGE BANDING UNIT (for each side): - Gluing unit (Hot Melt Glue + Pre-melter) SP30 (High Melt + Edge Guide Z-axis) - Edge pressure zone (CNC-controlled). Edge magazine for rolls (No. 6 positions) - End trimming unit IT 90-S (0.3 kW x2) 28 m/min, 0 - 25°, PNEUMATIC - Multi-profile milling unit (CNC controlled) RF 30 (0.65 kW x2) 0 - 25° - Multifunctional unit (radius milling and contour milling unit) AR 80 (0.3 kW x2) 25 m/min – ROTAX - Motors with automatic tool change (tools with 8+8 positions) Multi-profile scraping unit (CNC controlled) RB 30 Flat scraper unit RC 20 – spray unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x2) With 'hopper' for panels (usable height mm 80), serves as buffer to accelerate work cycles

Būklė: labai geros būklės (naudotas), Longitudinal panel saw (splitter) for grooving and/or cutting a single panel into two parts Codpfeu Tqb Usx Af Asrb - Min. panel length: 500 mm - Max. panel length: 2700 mm - Min. panel width: approx. 300 mm - Max. panel width: 700 mm - Panel thickness (min./max.): 10 / 30 mm - Max. feed speed: 50 m/min (4 kW) - Total installed power: 43.2 kW The machine consists of the following units: POS. 1: Milling unit for underside grooving (7.4 kW), max. diameter 300 mm POS. 2: Lower scoring saw (7.4 kW), max. diameter 350 mm POS. 3: Upper scoring saw (7.4 kW), max. diameter 350 mm POS. 4: Lower main saw blade (separator/ splitter blade) (7.4 kW), max. diameter 350 mm

Būklė: labai geros būklės (naudotas), Complete factory for furniture production, consisting of: KZ2207) "BIESSE" FDT – CNC drilling and dowel-inserting line, comprising: Depalletizing station "RBO" Tornado, 2 x CNC through-feed drilling machines "BIESSE" FDT, 1 x CNC dowel-inserting machine "BIESSE" SDT CN, loading station "RBO" Tornado KZ2205) 4-sided sizing and edge-banding line "HOMAG", comprising: Depalletizing double stations "ESSE2", 1st double-sided sizing and edge-banding machine "HOMAG" PowerLine KF 20/20/QA/15, 90° transfer unit (longitudinal/transverse) "HOMAG" TD 31/30/12, 2nd double-sided sizing and edge-banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd 90° transfer unit (transverse/longitudinal) "ESSE2", loading double stations "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vector CNC LINE for Drilling, Milling, and Inserting, comprising: Hedgehog loader (18 positions), CNC Vector GLR 30-13, Vector XL 40-30, Idrak-3, various transfer units KZ2090) Sanding machine (veneer sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 Crjdpfjh T Dvtjx Af Aeb KZ2045) Gantry CNC with edge banding "MORBIDELLI" Planet HP6018 (2 tables, 6 edge magazines) KZ2033) Edge banding machine "HOMAG" KAL 310 with destacking-feed "ESSE2" KZ2075) Furniture assembly line "TERMOPAK" with continuous case clamp KZ2203) Sawing line "SALVADOR" (panel cross-cut + splitter/rip saw) with destacking "ESSE2" KZ2009) Veneer department (double-knife veneer pack cutter "MONGUZZI", crosscutting shear "MONGUZZI"; splicing machine "KUPER", veneer bundle cutter "TAGLIABUE", etc.) KZ2201) Press line "COLOMBO REMO" (mm 1400x6200) for veneer/laminated panels KZ2215) Automatic panel storage system "ESSE2" Mod. MAGAZZINO No. 3 sawdust filter stations "MION" (1st: 132 kW, 2nd: 55 kW, 3rd: 22 kW) Various vehicles (trucks, vans, etc.) Many other machines (CNC BIESSE Skipper 130, drilling machines VITAP and MORBIDELLI, circular saws, glue application machines, etc.), extraction system, roller conveyors, shelves (wall racks), forklifts, pallet trucks, and much more. The machines are still installed at the user's site and can be viewed by appointment.

Būklė: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Safety and soundproof cabin Manual side adjustment of unit carrier Cam pitch (mm): 500 SIZING UNIT (for each side): Protective cutter (pre-milling) AS 10 (5.8 kW) 2 x hoggers DT 10 (5.8 + 5.8 kW) Spraying device (for liquid anti-adhesive) EDGEBANDING SECTION (for each side): Gluing unit (hot-melt glue + premelter) SP30 (High Melt + Edge Control EC 40) Edge pressure section (CNC controlled). Edge magazine for rolls (No. 6 positions) End trimming unit IT 90-S (0.65 kW x 2) 28 m/min, 0 - 25°. PNEUMATIC Multi-profile milling unit (CNC controlled) RF 40 (1 kW x 2) 0 - 25° Csdpfxohvahhs Af Asrb Multifunction unit (radius and form milling unit) AR 80 (0.65 kW x 2) 25 m/min, ROTAX motors with automatic tool changer (tools) 2 universal milling units for grooving, rebating, and profiling FB 30 (5 kW x 2) 0 - 90° Multi-profile scraper unit (CNC controlled) RBK - 503 (2 positions) Flat scraper unit RC 20 Spraying unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x 2)

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (Half Line) with automatic high-speed handling system: A) FEEDING STATION (gantry) "RBO" Model Advantage C 320 double station, complete with central motorized roller conveyor. B) ROTARY TRANSFER UNIT (longitudinal/crosswise) with double cone "RBO" Model GPK-1 Cedohvah Njpfx Af Aerb C) Double-sided sizing and edge banding machine "BIESSE" Model Stream SB2 11.0 D) ROTARY TURNER (180° inversion, top face down) "RBO" Model Ribaltatore E) ROTARY TRANSFER UNIT (crosswise/longitudinal) with double cone "RBO" Model GPK-2 F) STACKING STATION (gantry) "RBO" Model Advantage SC 3200 double station, complete with central motorized roller conveyor.

Būklė: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (First machine in a production line) Edge banding material (thickness min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 270 - 1200 Csdpfx Aet N Ix Ref Aerb Control / Software: SINITRA Feed speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and noise protection cabin Side adjustment of aggregate carrier: manual FORMAT PROCESSING (each side): 2 x Hogger DT 10 (5.8 kW x 2) Space for jointing unit FS Jointing aggregate ES30 + ER30 (5 kW x 2), 0° - 90° Universal milling unit Softforming SF 10 (2 x 2.4 kW), 0° - 45° Spraying device (for liquid non-stick agent) EDGE BANDING SECTION (each side): Edging unit (Hot-melt glue + pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Preheating RP 10 Edge pressure zone (CNC controlled) Pressure roller track (revolver) for straight and shaped (softforming) edges Soft PF40 (4 positions), 800 mm (Shears CI10+CS10+RL10) - Edge magazine for coils (no. 6 positions) Milling unit RS 10 (1.3 kW x 2) Milling unit Softforming RF 10 / SF (0.65 kW x 2) Multi-profile milling unit RF 30 (0.65 kW x 2) Universal milling unit for grooving/rabbetting and profiling FB 30 (4.5 kW x 2), 0 - 90° Multi-profile scraper unit RB 30 Flat scraper unit RC 05 / Soft Spray units (for polishing fluid) + buffing unit SZ 30 (0.37 kW x 2)