Bbs 550 pirkti naudotą (7 033)

Sąlyga: naudotas, Gamybos metai: 2001, Transnorm Belt Curve Conveyor Left GKF 20°-750-550 IR1300 RA1479 The Transnorm belt curve conveyor is in good (used) condition and is fully functional. It is equipped with a SEW brand gear motor. Supports and side guides are not included in the scope of delivery but are optionally available upon request. Belt curves are widely used in intralogistics for the in-house transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves impress with their performance and reliability. Thanks to a low-tension drive across the entire belt width, continuous operation over long periods is easily achievable. Conical drums and a specially designed belt guiding system ensure maximum running smoothness. The images shown depict the conveyor system while still installed at a logistics center. Technical Specifications: Model: Belt Curve Conveyor TS 1600-105 Conveying length (middle radius, NL): 640 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Height (BH): 210 mm Inner radius (IR): 1300 mm Conveyor angle: 20° Support feet and side guides available on both sides as an option Conveying speed (v m/s): 0.03–1.05 m/s Dwodjk Abcgspfx Admof Drive: SEW geared motor SA37/1 DT71D4/MM3/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Belt: double-layer, green, smooth, KT36 (see images for wear) Year of manufacture: 2001 Optionally available: - Supports - Side guides, single-sided or double-sided All prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert consultation, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, The team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Sąlyga: geras (naudotas), Gamybos metai: 2006, veikimo valandos: 21 437 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 122574, Controller: OSP P200 L Sehr geringe Spindelstunden. Max. Drehdurchmesser: ø 720 mm Abstand zwischen den Spindeln: 2.000 mm Spindeldrehzahl: 3.500 U/min Spindelleistung: 30 kW Djdpfx Asurfz Iedmswf Gegenspindel; Spindeldrehzahl: 3.800 U/min Spindelleistung: 22 kW Werkzeugantrieb Drehzahl: 5.000 U/min Werkzeugantriebsleistung: 22 kW Anzahl der Werkzeuge unten Revolver: 12 Obere Frässpindel: HSK100 ATC: 32-fach HSK100 Y-Achse: 250 mm (+125 / -125) Aufstellfläche: 6.150 x 3.073 mm

Sąlyga: naudotas, rida: 849 000 km, galia: 220 kW (299,12 AG), pirmoji registracija: 01/2009, kuro tipas: dyzelinas, sėdimų vietų skaičius: 53, pavaros tipas: automatinis, emisijos klasė: Euro 5, spalva: balta, stabdžiai: retarderis, Įranga: ABS, autonominis šildytuvas, oro kondicionavimas,

Sąlyga: naudotas, rida: 1 208 995 km, galia: 280 kW (380,69 AG), pirmoji registracija: 12/1995, kuro tipas: dyzelinas, sėdimų vietų skaičius: 52, pavaros tipas: mechaninis, spalva: raudona, stabdžiai: retarderis, Įranga: ABS, autonominis šildytuvas, oro kondicionavimas, vonios kambarys,

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1982, veikimo valandos: 5 000 h, Parduodu smulkintuvą Klockner 1982 m., geros būklės, dvišakis, smulkina stambia frakcija, smulkintuvo įvadas 550×220 mm, Leyland variklis 120 AG, mažos kuro sąnaudos, vibracinė plokštė 400×500 cm. Djdov U Eatspfx Admowf

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, tuščias svoris: 130 kg, kėlimo galia: 1 000 kg/m, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 550, Vakuuminis keltuvas Panel System DS 550 MAX – Nuotolinis valdymas radijo bangomis Galimybė pritaikyti konfigūraciją pagal individualius poreikius SPECIFIKACIJA: • 6 vnt. 1 m ilgio svirčių • 6 vnt. skersinių svirčių su reguliuojamu siurbtukų tvirtinimu • 12 vnt. šoninių siurbtukų • Sieninis adapteris • Valdymo centras su įkrovimo funkcija • Radijo bangomis valdomas valdymo centras • Nuotolinio valdymo pultelis • 2 vnt. saugos diržų • Maksimali keliamoji galia: 1000 kg ĮRANGOS SAVYBĖS: • Suderinamas su visais kranais ir HDS • Pritaikytas darbui įvairiomis sąlygomis • Siurbtukai reguliuojami be įrankių • Maitinimas: 12V akumuliatorius (darbo laikas iki 12 val.) • Akumuliatoriaus įkrovos indikatorius • Manometras Djdpsxnanzefx Admewf • Vakuumo rezervuaras • Maksimali keliamoji galia 1000 kg • Įrangos svoris apie 130 kg • Siurbtukai 500mm x 100mm su keičiamu tarpikliu

Sąlyga: naudotas, Gamybos metai: 2007, Gebhardt Roller Diverter Sorter Ejector 45° 1800-1300-550 RA1148 Year of manufacture: 2007 Permissible load capacity: 30 kg/m Dwodpfx Adsk Aa Efomsf Dead weight: 40 kg/m Roller width: 550 mm Nominal/outer width (NB): 610 / 1300 mm Pusher element: Rollers Set installation height: 680 mm Conveying speed: 0.35 m/sec. Brake for accumulation operation on the ejector conveyor Drive for ejector mechanism: Electric Conveyed goods dimensions (L x W): 600 mm x 400 mm Optional: Customised height adjustments as per your requirements Electrical accessories such as light barriers, barcode sensors Control system/software Prices quoted are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, please do not hesitate to contact us. Simply call us or send us an email. We are happy to help you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2022, Lazerinis pjovimas 569 darbo valandų Paskutinis techninis aptarnavimas: 2023-02-10 6000 W galios pluoštinis lazeris su aušinimo moduliu Didžiausias ilgis: 3048 mm Didžiausias plotis: 1524 mm Z ašis: 100 mm Maksimalus lakšto svoris: 750 kg Dedpomzbkrofx Admowf Didžiausias pjovimo storis: Juodasis plienas: 25 mm Nerūdijantis plienas: 20 mm Aliuminis: 20 mm Varis: 8 mm Komplekte programinė įranga: PARTS.L – gamybos valdymas ADDIN.SOLIDWORKS – integracija tarp Solidworks ir Streamlaser STREAMLASER – CAM ir išdėstymas VALUES.L – gamybos sąnaudų įvertinimas Kompiuteris su Intel Xeon W-2123, Nvidia Quadro P2000, 16 GB RAM Įrenginys kaip naujas, pilnai veikiantis.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, veikimo valandos: 12 976 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: NSO997, X ašies eiga: 750 mm, Y ašies eiga: 800 mm, Z ašies eigos atstumas: 850 mm, valdiklio modelis: FANUC Series 30i, veleno greitis (maks.): 15 000 aps./min, TECHNICAL DETAILS Travel X-axis: 750 mm Travel Z-axis: 800 mm Travel Y-axis: 850 mm Magazine capacity: 120 positions Spindle Speed range: 50–15,000 rpm Spindle diameter (front bearing I.D.): 80 mm Spindle taper: ISO R297 / Taper No. 40 Tool holder: MAS I Type P40T Table Dsdpfx Adsxqmbgomewf Pallet size: 550 × 550 mm Max. swivel range of rotary table: 360° Pallet height: 750 mm Distances Distance between spindle nose and table center: 150–1,000 mm Distance between spindle nose and table surface: 50–850 mm Feed rates Rapid traverse X, Y, Z axes: 60,000 mm/min Cutting feed (common for X, Y, Z axes): 0.001–30 mm/min Tool changer (ATC) Number of tools: 40 Tool size (Ø × length): Ø75 × 470 mm Tool weight: 8.0 kg Tool change time (Tool to Tool): 1.3 s Performance Data Positioning accuracy (X, Y, Z axes): ±0.003 mm Repeatability (X, Y, Z axes): ±0.0015 mm Pallet load: 800 kg Thrust force: 9,800 N MACHINE DETAILS Control unit: FANUC Series 30i Space Requirements & Weight Required space: 2,750 × 5,700 mm Machine weight: 16,000 kg Motors Spindle motor (15 min rated power): 22 / 18.5 kW Hydraulic pump motor: 3.7 (4) kW Operating Hours Operating time: 12,976 h Control on-time: 112,997 h

Sąlyga: naudotas, rida: 477 430 km, galia: 260 kW (353,50 AG), pirmoji registracija: 11/2014, kuro tipas: dyzelinas, sėdimų vietų skaičius: 56, pavaros tipas: automatinis, emisijos klasė: Euro 6, spalva: balta, stabdžiai: retarderis, Įranga: ABS, autonominis šildytuvas, elektroninė stabilumo programa (ESP), oro kondicionavimas,

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 655050, X ašies eiga: 550 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, stalo apkrova: 500 kg, veleno greitis (maks.): 42 000 aps./min, TECHNINĖ INFORMACIJA Eigos X ašies eiga: 550 mm Y ašies eiga: 400 mm Z ašies eiga: 400 mm Greitasis judesys (X/Y/Z): 60 m/min Velenas Sukimosi greitis: maks. 42.000 aps./min Įrankių sistema Įrankių tvirtinimas: HSK 40 E Įrankių vietos: 32 Stalas Stalo dydis: 650 mm × 500 mm Maks. stalo apkrova: 500 kg STAKLIŲ DUOMENYS Dwodpexwc Hrefx Admsf Variklio galia: 15 / 17 kW Valdymas: Andronic 2060 Matmenys ir svoris Užimama vieta (I×P×A): 2,58 m × 1,9 m × 2,26 m Staklių svoris: 7.200 kg ĮRANGA Matavimo jutiklis Elektroninis rankinis ratukas Erowa nulio taško įtvirtinimo sistema

Sąlyga: naudotas, Ritininių konvejeris su 90° grandinės stūmikliu RA1847 Tipas: Transnorm 9900-600-500 Dwjdok Abg Iepfx Admsf Transportavimo ilgis (FL): 9900 mm Ritinių plotis (RB): 550 mm Nominalus / išorinis plotis (NB): 600 mm Grandinės stūmiklio plotis: 700 mm Montavimo aukštis (BH): 140 mm Guolių ratukų atstumas: 80 mm Įskaitant pneumatinį stabdiklį Pasirenkami priedai: Laikikliai Krašto kreipiančiosios viena- arba abipusės Dažnio keitiklis Kainos nurodytos be PVM iš centrinio sandėlio Dr. Sonntag GmbH & Co KG, 97076 Würzburg Norėdami gauti individualią, profesionalią konsultaciją, susisiekite su mumis. Kreipkitės telefonu arba el. paštu. Mielai padėsime planuojant ir įgyvendinant Jūsų projektus. Laukiame Jūsų užklausos. Pagarbiai, Dr. Sonntag GmbH & Co. KG komanda Jūsų intralogistikos specialistas ir kontaktinis asmuo.

Sąlyga: naudotas, rida: 1 063 642 km, galia: 300 kW (407,89 AG), pirmoji registracija: 06/2013, kuro tipas: dyzelinas, sėdimų vietų skaičius: 60, pavaros tipas: automatinis, emisijos klasė: Euro 5, spalva: žalia, stabdžiai: retarderis, Įranga: ABS, autonominis šildytuvas, oro kondicionavimas,

Sąlyga: naudotas, Gamybos metai: 2001, Transnorm Belt Curve Conveyor Right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good used condition and fully operational. It is equipped with a SEW-branded geared motor. Supports are not included in the scope of delivery but are optionally available upon request. Belt curves are frequently used in intralogistics for internal transport of unit goods and are an integral part of modern distribution centers. Transnorm belt curves stand out for their performance and reliability. The low-tension drive across the entire belt width ensures long operating times without issues. Conical drums and a specially developed belt guidance system provide maximum running smoothness. The photos shown of the conveyor system were taken while still installed in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (center radius, NL): 759 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Construction height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support legs optional Conveying speed (v m/s): 0.03–1.05 m/s Drive: SEW geared motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11/0.55/S1 Belt: double-layered, green, smooth, type KT36 Dwodpfsk Abuiex Admef Year of manufacture: 2001 Special features/accessories: Side guides on both sides included Optional: - Supports - Single-sided or double-sided side guides All prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For personalized and professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics

Sąlyga: naudotas, Lippert infeed and outfeed conveyors, belt conveyor GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical Specifications: - Conveyor length (NL): 640 mm or 815 mm with belt width 400, or 820 mm with belt width 600 - Frame width (NB): 550 mm / 750 mm - Belt width (GuB): 400 mm / 600 mm - Overall height (BH): 105 mm - Support feet: optionally available - Conveyor speed (v m/s): speed is adapted to main conveyor via gearing - Drive: toothed belt drive - Return pulley (UR): Ø = 81 mm - Drive drum (AT): Ø = 81 mm Optional Accessories: - Supports - Side guides (one-sided or double-sided) Please note: A suitable gear wheel must be installed on the output shaft for the drive transfer. This may require a different return pulley. If needed, please contact us for advice on this matter. Defective belts will be replaced prior to delivery. Prices are net, excluding VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For individual, professional advice, simply contact us. Contact us by phone or email. We are happy to assist you in the planning and implementation of your projects. Dodpfx Ademqty Usmswf We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Sąlyga: naudotas, Gamybos metai: 2001, Transnorm Belt Curve Conveyor Left, GKF 180°-750-550 IR1000 RA1483 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It features a SEW brand geared motor. Supports are not included in the delivery scope but are optionally available upon request. Belt curves are widely used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves excel with their performance and reliability. The low-tension drive across the entire belt width allows for extended operating times. Tapered rollers and a specially designed belt guidance system ensure maximum smooth running. The displayed images show the conveyor system in its currently installed state at a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (center radius, NL): 4,820 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Frame height (BH): 210 mm Inner radius (IR): 1,000 mm Conveying angle: 180° Support legs: optionally available Conveying speed (v m/s): adjustable up and down via frequency inverter Dodpfok Abcrjx Admewf Drive: SEW geared motor SA37 DT80N4/MM07/BW1 Electrical data: 50 Hz, 380–500 V, 0.15 / 0.75 kW, S1 Belt: double-layered, green, smooth, KT36 (see images for wear) Year of manufacture: 2001 Special features / accessories: Side guides included on both sides Optionally available: support legs Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert consultation, please feel free to contact us. Reach us by phone or email—we are happy to assist with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics.

Sąlyga: naudotas, Gamybos metai: 2007, Gebhardt 90° Roller Curve Conveyor Right 610-550 with 2 Straight Sections RA1282 The Gebhardt roller curve is from 2007 and is in very good (used) condition. It is equipped with an SEW brand motor. Supports are included in the scope of delivery. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 014.15 Year of manufacture: 2007 Condition: very good (used) Motor: fully functional Angle: 90° Inside radius (IR): 850 mm Djdpfxjk Aa Rye Admowf Nominal/Outside width (NB): 610 mm Usable width (NUB): 550 mm Length of straight sections: 1 x 300 mm + 1 x 150 mm Motor type: SEW geared motor Motor output: 0.37 kW/S1 50 Hz 2.00/1.15 A Conveying speed: 0.37 m/sec Drive: head drive Rollers: Type G6/50, glide-bearing with conical plastic end piece Weight: 110 kg Delivery includes: with supports, 670 mm upper edge of rollers Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply contact us. You can reach us easily by phone or email. We are happy to assist with planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Sąlyga: naudotas, Lippert infeed and outfeed conveyors, belt conveyor GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical Specifications: Djdomqty Rspfx Admswf - Conveyor length (NL): 640 mm or 815 mm with belt width 400, or 820 mm with belt width 600 - Frame width (NB): 550 mm / 750 mm - Belt width (GuB): 400 mm / 600 mm - Overall height (BH): 105 mm - Support feet: optionally available - Conveyor speed (v m/s): speed is adapted to main conveyor via gearing - Drive: toothed belt drive - Return pulley (UR): Ø = 81 mm - Drive drum (AT): Ø = 81 mm Optional Accessories: - Supports - Side guides (one-sided or double-sided) Please note: A suitable gear wheel must be installed on the output shaft for the drive transfer. This may require a different return pulley. If needed, please contact us for advice on this matter. Defective belts will be replaced prior to delivery. Prices are net, excluding VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For individual, professional advice, simply contact us. Contact us by phone or email. We are happy to assist you in the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Sąlyga: naudotas, Gamybos metai: 2007, Gebhardt Roller Diverter Sorter Ejector 45° 2400-1300-550 RA1147 Type 356.10 Year of manufacture: 2007 Permissible load: 30 kg/m Own weight: 40 kg/m Roller width: 550 mm Nominal/External width (NB): 610 mm Pusher element: Roller segments Set installation height: 680 mm Conveying speed: 0.35 m/sec. Brake for accumulation operation on ejection line Ejector mechanism drive: Electric Conveyed goods dimensions (L x W): 600 mm x 400 mm Optional: Customised height upon request Electric add-ons such as photoelectric sensors, barcode readers Control/software Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Dedpfx Adsk Aa Ebjmewf

Sąlyga: naudotas, Gamybos metai: 2000, Transnorm Belt Curve Conveyor Right GKF 70°-730-550 IR600 RA1936 The Transnorm belt curve is fully operational. It comes equipped with an SEW gear motor. Support legs are not included in the scope of delivery but are optionally available on request. Dsdpfxjk Ablpo Admewf Belt curves are frequently used in intralogistics for internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, they are suitable for long operating times. Tapered drums and a specially developed belt guiding system ensure maximum running smoothness. Technical data: Frame width (NB): 730 mm Belt width (GuB): 550 mm Height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees Support feet: optionally available Conveying speed (v m/s): continuously adjustable with frequency converter between 0.032–1.17 m/s Drive: SEW gear motor Electrical data: 50Hz V380–500, kW 0.55 / S1 Year of manufacture: 2000 Scope of delivery: without support legs Optionally available: Support legs Side guides (single- or double-sided) Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For tailored, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and execution of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics.

Sąlyga: naudotas, Gamybos metai: 2001, Transnorm Belt Curve Conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully functional. It is equipped with a SEW brand geared motor. Support stands are not included in the scope of delivery, but are optionally available upon request. Belt curves are frequently used in intralogistics for in-plant transport of unit goods and have become indispensable in modern distribution centers. Transnorm belt curves are known for their performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating times are not a problem. Tapered rollers and a specially developed belt guiding system ensure maximum running smoothness. The images shown of the conveyor system were taken in its installed state in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length, middle radius (NL): 3900 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Conveyor height (BH): 210 mm Inner radius (IR): 850 mm Conveying angle: 160° Support feet: optionally available Conveying speed (v m/s): adjustable up and down via frequency inverter Djdpfx Aek Aa T Rodmowf Drive: SEW geared motor SA37/T DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double-layer, green, smooth Year of manufacture: 2001 Special features / accessories: side guides included on both sides Optionally available: - Support stands - Side guide on one or both sides Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Contact us by phone or email. We will be happy to assist you with the planning and realization of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG your expert partner for intralogistics.

Sąlyga: naudotas, Gamybos metai: 2007, Gebhardt Roller Conveyor Diverter 45° 1900-1800-550 RA1149 Year of manufacture: 2007 Permissible load: 30 kg/m Dead weight: 40 kg/m Roller width: 550 mm Nominal/Outer width (NB): 610 / 1800 mm Conveyor length: 1900 mm Diverting element: Rollers Set installation height: 680 mm Conveying speed: 0.35 m/sec Brake for accumulation operation on outfeed conveyor Outfeed mechanism drive: Electric Dimensions of conveyed goods: L x W = 600 mm x 400 mm Optional: Adjustable height to customer specifications Dodek Aa Eiopfx Admewf Electric add-on components such as photoelectric sensors, barcode scanners Control unit/software Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual and professional advice, please feel free to get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics

Sąlyga: naudotas, Gamybos metai: 2001, Transnorm Belt Curve Conveyor Left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve is in good condition (used) and fully operational. It is equipped with a SEW brand gear motor. Supports are not included in the scope of delivery but are optionally available upon request. Belt curves are frequently used in intralogistics for in-house transport of piece goods and are indispensable in modern distribution centers. Transnorm belt curves are renowned for their performance and reliability. Thanks to a low-tension drive system across the entire belt width, long operating cycles are no issue. Tapered rollers and a specially designed belt guidance system ensure maximum running smoothness. The displayed photos show the conveyor system while still installed in a logistics center. Technical Specifications: Model designation: Belt Curve Conveyor TS 1600-105 Conveyor length at center radius (NL): 680 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Installation height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 45° degrees Support legs: optionally available Conveying speed (v m/s): 0.03–1.05 m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz, V380-500, kW 0.11 / 0.55 / S1 Belt: double-ply, green, smooth, KT36 (wear as shown in the photos) Dwodok Aba Tepfx Admsf Year of manufacture: 2001 Optional items included: - Supports - Side guide (single-sided and double-sided) Prices net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert consultation, simply get in touch with us. Contact us by phone or e-mail. We are happy to support you in the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Sąlyga: naudotas, Gamybos metai: 2007, Gebhardt Roller Curve Conveyor 2 x 90° Left 610-550-300 with Straight Section RA1210 The Gebhardt roller curve conveyors with straight section are from 2007 and in good (used) condition. They feature a central motor by SEW. Supports are not included in the scope of delivery but are optionally available upon request. Technical Specifications: Manufacturer: Gebhardt Type: 1070.113 Year of manufacture: 2007 Condition: good (used) Motor: fully functional Angle: 2 x 90° with straight section Outer width: 610 mm Clamping length: 550 mm Length of straight section: 300 mm Roller type: G6/50, gliding bearing with conical plastic moulded part Load capacity: 30 kg/m Motor type: SEW geared motor Motor power: 0.37 kW/S1 Frequency: 50 Hz, Amps: 2/1.15 Conveying speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (available on request) Optional: Supports Dwodpfxjk Aa Nbs Admjf For customised, professional advice, please do not hesitate to contact us. Get in touch with us by phone or email. We will be happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and partner for intralogistics

Sąlyga: naudotas, Gamybos metai: 2001, Transnorm Belt Curve Conveyor, Left-Hand GKF 45°-750-550 IR700 RA1390 The Transnorm belt curve conveyor is in good condition (used) and is fully functional. It is equipped with a SEW brand gear motor. Supports are not included in the scope of delivery but are available as an option on request. Belt curves are frequently used in intralogistics for internal transportation of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves are renowned for their performance and reliability. Thanks to a low-strain drive across the entire belt width, they are designed for prolonged operating times. Conical drums and a specially developed belt guidance system ensure maximum running smoothness. The images shown depict the conveyor system in its installed condition in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (center radius, NL): 766 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 700 mm Conveying angle: 45° Support legs: optionally available Conveying speed (V m/s): 0.03–1.05 m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz, v380-500, kW 0.11 / 0.55 / S1 Belt: double-layer, green, smooth Year of manufacture: 2001 Optional extras: Supports Dwsdpfx Aek Aa T Hedmsf Side guides (single-sided or double-sided) All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional consultation, please do not hesitate to contact us directly by phone or email. We are happy to support you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your Team at Dr. Sonntag GmbH & Co. KG Your partner and specialist for intralogistics