Aukšto Slėgio Plovimo pirkti naudotą (18 606)

Būklė: beveik kaip naujas (naudotas), Woma 150Z P16 2000 bar at 20 l/min at 1800 rpm Njdpod Hny Ajfx Abbjwf

Būklė: geras (naudotas), URACA KD716 high-pressure pump Nodpfxsd Hnyye Abbewf Electrically driven high-pressure pump 28mm Two-speed motor; 450 bar at 84 l/min at 1500 rpm 450 bar at 42 l/min at 750 rpm

Būklė: reikia remonto (naudotas), Gamybos metai: 2011, Funkcionalumas: neveikiantis, mašinos/transporto priemonės numeris: 8506, darbinis slėgis: 2 000 juosta, Įranga: dokumentacija / vadovas, 1. Produkto apžvalga Džiaugiamės galėdami pasiūlyti naudotą naujos kartos MiniDeBEE aukšto slėgio homogenizatorių, ypač tinkamą ląstelių lizės, dalelių dydžio mažinimui, nano ir mikroemulsijų gamybai. Puikus balansas tarp laboratorinio ir pilotinio mastelio. Sklandus perėjimas į didesnį mastelį garantuojamas. 2. Techninės specifikacijos Modelis: MiniDeBEE 2011 – iki 2000 bar Nwjdpfx Abjxuvm Hobof Maksimali srauto norma: 200 ml/min Būklė: 1,5 metų naudotas Cosaic įmonėje – ŠIUO METU NEVEIKIANTIS; (problema diagnozuota su Pion pagalba. Remonto ir atsarginių dalių kaina iki 2500 EUR);

Būklė: geras (naudotas), Gamybos metai: 2002,

Būklė: naudotas, Gamybos metai: 2021, veikimo valandos: 1 231 h, Funkcionalumas: visiškai funkcionalus, bendras plotis: 720 mm, bendras ilgis: 950 mm, bendras aukštis: 800 mm, slėgis: 500 juosta, darbinis slėgis: 450 juosta, įvesties srovės tipas: trifazis, bendras svoris: 175 kg, aukšto slėgio žarnos ilgis: 20 000 mm, tūrio srautas: 0,96 m³/val, tuščias svoris: 175 kg, įėjimo įtampa: 400 V, žarnos ilgis: 20 000 mm, DENJET CE 20 COMPACT 500 aukšto slėgio plovimo / smėliavimo įrenginys - Slėgis: 500 barų - Srautas: 16 l/min - Maitinimo galia: 15 kW - Įtampa: 400 V - Srovė: 28 A - 20 m dėvėjimuisi atspari aukšto slėgio žarna su ½” BSPP sukamaisiais moteriškais sujungimais (pratęsimo žarna) - 15 m, 4 gyslų alyvai atsparus elektros kabelis - Sauso užsidarymo pistoletas su nerūdijančio plieno 0,85 m ilgio antgaliu - Tiesinės srovės purkštukas Nedpfx Aoyak Tyebbewf - CEE elektros kištukas - Sukamas purkštukas - Smėliavimo komplektas su boro karbido antgaliu - Mobilus abrazyvų talpykla - Asmeninės apsaugos įranga: šalmas su akių apsauga, nepralaidus kombinezonas, iki 1000 barų apsauginė prijuostė, apsauginiai batai 43 dydžio.

Gamybos metai: 2020, būklė: naujas, • PLC microprocessor control • HMI control panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – in the event of power failure or sudden shutdown, mixing of liquids is prevented The control box is built to IP54 standards User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners utilize sheet metal panels for chemical protection. The wash walls offer splash protection, and thanks to the closed chemical circulation system, the process can be carried out with minimal chemical usage. Due to the low amount of refrigerant required, the medium is easy to heat and inexpensive to purchase. Additionally, you can clean large-sized components that cannot be washed in immersion tanks. Nwsdsfz Dvcepfx Abbef Filtration System Thanks to the filtration system, chemicals circulate in a closed loop—three filters of various thicknesses are used to prevent debris and grease from entering the system. Chemicals are stored in heated stainless steel tanks and are pressurized by a pump, delivering them to the lance. Washing Dimensions The high-pressure cleaner enables the washing of large components. An optional rotating platform allows the cleaned item to be turned; items can be loaded using a forklift or crane. High-pressure pumps The washing system comprises two preparation phases. Both treatments have independent sets of pipelines, pumps, cables, and spray guns to minimize mixing during phase changeover. Drains have dedicated valves for controlling fluid recovery. The car wash is equipped with logical control that manages all components. Chemicals are pumped by a highly durable, acid-resistant AISI304 multi-stage pump (3 kW, 20 bar). For the rinsing phase, a high-pressure plunger pump with ceramic plungers (3 kW) is used, delivering 160–200 bar of pressure.

Gamybos metai: 2020, būklė: naujas, • PLC microprocessor control • HMI control panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – in the event of power failure or sudden shutdown, mixing of liquids is prevented The control box is built to IP54 standards Nwsdpef Aaalofx Abbjf User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners utilize sheet metal panels for chemical protection. The wash walls offer splash protection, and thanks to the closed chemical circulation system, the process can be carried out with minimal chemical usage. Due to the low amount of refrigerant required, the medium is easy to heat and inexpensive to purchase. Additionally, you can clean large-sized components that cannot be washed in immersion tanks. Filtration System Thanks to the filtration system, chemicals circulate in a closed loop—three filters of various thicknesses are used to prevent debris and grease from entering the system. Chemicals are stored in heated stainless steel tanks and are pressurized by a pump, delivering them to the lance. Washing Dimensions The high-pressure cleaner enables the washing of large components. An optional rotating platform allows the cleaned item to be turned; items can be loaded using a forklift or crane. High-pressure pumps The washing system comprises two preparation phases. Both treatments have independent sets of pipelines, pumps, cables, and spray guns to minimize mixing during phase changeover. Drains have dedicated valves for controlling fluid recovery. The car wash is equipped with logical control that manages all components. Chemicals are pumped by a highly durable, acid-resistant AISI304 multi-stage pump (3 kW, 20 bar). For the rinsing phase, a high-pressure plunger pump with ceramic plungers (3 kW) is used, delivering 160–200 bar of pressure.

Gamybos metai: 2020, būklė: naujas, • PLC microprocessor control • HMI control panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – in the event of power failure or sudden shutdown, mixing of liquids is prevented The control box is built to IP54 standards User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners utilize sheet metal panels for chemical protection. The wash walls offer splash protection, and thanks to the closed chemical circulation system, the process can be carried out with minimal chemical usage. Due to the low amount of refrigerant required, the medium is easy to heat and inexpensive to purchase. Additionally, you can clean large-sized components that cannot be washed in immersion tanks. Filtration System Thanks to the filtration system, chemicals circulate in a closed loop—three filters of various thicknesses are used to prevent debris and grease from entering the system. Chemicals are stored in heated stainless steel tanks and are pressurized by a pump, delivering them to the lance. Washing Dimensions The high-pressure cleaner enables the washing of large components. An optional rotating platform allows the cleaned item to be turned; items can be loaded using a forklift or crane. High-pressure pumps Nwsdpefz Dvvofx Abbsf The washing system comprises two preparation phases. Both treatments have independent sets of pipelines, pumps, cables, and spray guns to minimize mixing during phase changeover. Drains have dedicated valves for controlling fluid recovery. The car wash is equipped with logical control that manages all components. Chemicals are pumped by a highly durable, acid-resistant AISI304 multi-stage pump (3 kW, 20 bar). For the rinsing phase, a high-pressure plunger pump with ceramic plungers (3 kW) is used, delivering 160–200 bar of pressure.

Gamybos metai: 2020, būklė: naujas, • PLC microprocessor control • HMI control panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – in the event of power failure or sudden shutdown, mixing of liquids is prevented The control box is built to IP54 standards User manual, declaration of conformity, 12-month warranty. Nodjfz Ax Sopfx Abbewf ROMER high-pressure cleaners utilize sheet metal panels for chemical protection. The wash walls offer splash protection, and thanks to the closed chemical circulation system, the process can be carried out with minimal chemical usage. Due to the low amount of refrigerant required, the medium is easy to heat and inexpensive to purchase. Additionally, you can clean large-sized components that cannot be washed in immersion tanks. Filtration System Thanks to the filtration system, chemicals circulate in a closed loop—three filters of various thicknesses are used to prevent debris and grease from entering the system. Chemicals are stored in heated stainless steel tanks and are pressurized by a pump, delivering them to the lance. Washing Dimensions The high-pressure cleaner enables the washing of large components. An optional rotating platform allows the cleaned item to be turned; items can be loaded using a forklift or crane. High-pressure pumps The washing system comprises two preparation phases. Both treatments have independent sets of pipelines, pumps, cables, and spray guns to minimize mixing during phase changeover. Drains have dedicated valves for controlling fluid recovery. The car wash is equipped with logical control that manages all components. Chemicals are pumped by a highly durable, acid-resistant AISI304 multi-stage pump (3 kW, 20 bar). For the rinsing phase, a high-pressure plunger pump with ceramic plungers (3 kW) is used, delivering 160–200 bar of pressure.

Gamybos metai: 2020, būklė: naujas, • PLC microprocessor control • HMI control panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – in the event of power failure or sudden shutdown, mixing of liquids is prevented The control box is built to IP54 standards User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners utilize sheet metal panels for chemical protection. The wash walls offer splash protection, and thanks to the closed chemical circulation system, the process can be carried out with minimal chemical usage. Due to the low amount of refrigerant required, the medium is easy to heat and inexpensive to purchase. Additionally, you can clean large-sized components that cannot be washed in immersion tanks. Filtration System Thanks to the filtration system, chemicals circulate in a closed loop—three filters of various thicknesses are used to prevent debris and grease from entering the system. Chemicals are stored in heated stainless steel tanks and are pressurized by a pump, delivering them to the lance. Washing Dimensions Nsdpfxoflpmqj Abbowf The high-pressure cleaner enables the washing of large components. An optional rotating platform allows the cleaned item to be turned; items can be loaded using a forklift or crane. High-pressure pumps The washing system comprises two preparation phases. Both treatments have independent sets of pipelines, pumps, cables, and spray guns to minimize mixing during phase changeover. Drains have dedicated valves for controlling fluid recovery. The car wash is equipped with logical control that manages all components. Chemicals are pumped by a highly durable, acid-resistant AISI304 multi-stage pump (3 kW, 20 bar). For the rinsing phase, a high-pressure plunger pump with ceramic plungers (3 kW) is used, delivering 160–200 bar of pressure.

Gamybos metai: 2020, būklė: naujas, • PLC microprocessor control • HMI control panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – in the event of power failure or sudden shutdown, mixing of liquids is prevented The control box is built to IP54 standards User manual, declaration of conformity, 12-month warranty. Nwodpfx Asfzrapjbbsf ROMER high-pressure cleaners utilize sheet metal panels for chemical protection. The wash walls offer splash protection, and thanks to the closed chemical circulation system, the process can be carried out with minimal chemical usage. Due to the low amount of refrigerant required, the medium is easy to heat and inexpensive to purchase. Additionally, you can clean large-sized components that cannot be washed in immersion tanks. Filtration System Thanks to the filtration system, chemicals circulate in a closed loop—three filters of various thicknesses are used to prevent debris and grease from entering the system. Chemicals are stored in heated stainless steel tanks and are pressurized by a pump, delivering them to the lance. Washing Dimensions The high-pressure cleaner enables the washing of large components. An optional rotating platform allows the cleaned item to be turned; items can be loaded using a forklift or crane. High-pressure pumps The washing system comprises two preparation phases. Both treatments have independent sets of pipelines, pumps, cables, and spray guns to minimize mixing during phase changeover. Drains have dedicated valves for controlling fluid recovery. The car wash is equipped with logical control that manages all components. Chemicals are pumped by a highly durable, acid-resistant AISI304 multi-stage pump (3 kW, 20 bar). For the rinsing phase, a high-pressure plunger pump with ceramic plungers (3 kW) is used, delivering 160–200 bar of pressure.

Gamybos metai: 2020, būklė: naujas, • PLC microprocessor control • HMI control panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – in the event of power failure or sudden shutdown, mixing of liquids is prevented The control box is built to IP54 standards User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners utilize sheet metal panels for chemical protection. The wash walls offer splash protection, and thanks to the closed chemical circulation system, the process can be carried out with minimal chemical usage. Due to the low amount of refrigerant required, the medium is easy to heat and inexpensive to purchase. Additionally, you can clean large-sized components that cannot be washed in immersion tanks. Filtration System Thanks to the filtration system, chemicals circulate in a closed loop—three filters of various thicknesses are used to prevent debris and grease from entering the system. Chemicals are stored in heated stainless steel tanks and are pressurized by a pump, delivering them to the lance. Nodpfx Abofz A D Nsbowf Washing Dimensions The high-pressure cleaner enables the washing of large components. An optional rotating platform allows the cleaned item to be turned; items can be loaded using a forklift or crane. High-pressure pumps The washing system comprises two preparation phases. Both treatments have independent sets of pipelines, pumps, cables, and spray guns to minimize mixing during phase changeover. Drains have dedicated valves for controlling fluid recovery. The car wash is equipped with logical control that manages all components. Chemicals are pumped by a highly durable, acid-resistant AISI304 multi-stage pump (3 kW, 20 bar). For the rinsing phase, a high-pressure plunger pump with ceramic plungers (3 kW) is used, delivering 160–200 bar of pressure.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 113509, Didelio tikslumo paviršiaus šlifavimo staklės Willis, 460V, pramoninis šlifuoklis Nodpfx Ajy Eyt Uebbjwf

Būklė: labai geros būklės (naudotas), Katalogo numeris 7807 TECHNINIAI DUOMENYS - vikšro plotis: 350 mm - pjovimo plotis: 350 mm - disko skersmuo: nuo 355 iki 505 mm - pjovimo aukštis: 10-170 mm - veleno skersmuo: 80 mm - stalo matmenys: 1900x790 mm - aukštis nuo pagrindo iki stalo: 830 mm IŠ VIRŠAUS - 2 eilių fiksatoriai/atmušėjai - 2 slydimo volai, lygūs, metaliniai - velenas su pjūklais - 2 spaudimo slydimo volai IŠ APAČIOS - kreipiamoji juosta - fiksatoriai/atmušėjai - vikšras - elektrinis korpuso aukščio reguliavimas - centralizuotas tepimas - reguliuojamas dažnio keitikliu greitis - padavimo variklis 4 kW - pagrindinis variklis 75 kW Nwedpfx Abeyk E Sfebsf - ištraukimo antgalio skersmuo: 2x150 mm - bendri matmenys ilgis/plotis/aukštis: 2050x1800x1800 mm - svoris apie 3500 kg PRIVALUMAI – vokiška gamyba – DTR dokumentacija – naudota daugiapjūklė – labai gera būklė Neto kaina: 58 900 PLN Neto kaina: 14 000 EUR pagal 4,2 EUR kursą (Kainos gali keistis, jei kursų svyravimai yra didesni)

Būklė: labai geros būklės (naudotas), KATALOGO NUMERIS 7948 Techniniai duomenys: - vikšro plotis: 400 mm - veleno darbinis plotis: 400 mm - didžiausias disko skersmuo (sumontuota 350 mm): 450 mm - disko skylės skersmuo: 70 mm - didžiausias pjūvio aukštis (su 450 mm disku): 160 mm - stalo plotis su praplėtimu: 710 mm - stalo ilgis: 1900 mm Iš viršaus: - atbulinės sklendės/atmušėjai: 2 eilės - slankiojantis metalinis spaudimo volas - atbulinės sklendės/atmušėjai - slankiojantis metalinis spaudimo volas - velenas su pjūklais - lygus metalinis slankiojantis volas Iš apačios: - kreipiamoji juosta - atbulinės sklendės - vikšras - elektrinis korpuso kėlimas - centrinis vikšro tepimas - 2 padavimo greičio režimai + pastovus reguliavimas - bendra galia: 32 kW - bendri matmenys (ilgis/plotis/aukštis): 2050x1800x1530 mm - svoris apie 2000 kg Privalumai: – pagaminta Italijoje – labai gera būklė – DTR techninė dokumentacija – naudotas daugiaašmenis pjūklas Nsdpfxeyxrbko Abbjwf Grynoji kaina: 48 900 PLN Grynoji kaina: 11 650 EUR Grynoji kaina apskaičiuota pagal kursą 4,2 PLN/EUR (kursui ženkliai svyruojant, kaina gali keistis)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, WEBEN / CEEVER Washing Tunnel with Robot, Conveyor, and Inspection System Manufacturer: WEBEN / CEEVER Application: Automated parts handling downstream from upstream press (press not included), washing, drying, and quality control Description: This system is an automated solution for extracting and transferring parts from an upstream press. Robots take over the parts and guide them via a conveyor and transport system through an industrial washing tunnel (wet cleaning), followed by a control/measurement system for quality inspection. The entire process chain is designed for continuous operation, integrating robotic handling, washing process, conveyor technology, and automatic quality assessment (OK/NOK). Technical Data – Washing Tunnel Year of manufacture: 2021 Cleaning process: spray-spray method (water-based), air blow-off, hot air drying Max. workpiece dimensions: Length 1400 mm Max. workpiece dimensions: Depth 2000 mm Max. workpiece dimensions: Height 10 mm Max. workpiece weight: 12 kg System dimensions: Width 3000 mm System dimensions: Depth 35,500 mm System dimensions: Height 3400 mm Weight (empty): 20,000 kg Weight (operational): 27,000 kg Media-exposed materials: Stainless Steel AISI 304 Wash tank volume: 4000 liters Wash tank heating: electric, 80 kW Rinse tank volume: 2500 liters Rinse tank heating: electric, 40 kW Wash pump: 2000 l/min, 6 bar, 30 kW Rinse pump: 900 l/min, 6 bar, 15 kW Washing filtration: 4 bag filters, 100 µm Drying: electric, 48 kW Electrical connection: 380–400 V / 50 Hz / 3 Ph + N Total connected load washing tunnel: 385 kW Njdsy Ein Ujpfx Abbswf Pneumatics for automation: 6–8 bar, connection 1/4″ Compressed air blow-off: 6–8 bar, 4 connections, consumption approx. 30,000 Nm³/h, connection 1 1/4″ Technical Data – Robot, Conveyor, and Inspection System Control: Siemens PLC S7-1500 1517F Operator panel: Siemens TP1900 Comfort Robot: KUKA KR50 R2500 IONTEC with KRC4 (multiple robots in the line) Conveyor technology: multiple conveyor lines/transport zones Max. conveyor speed: up to 24 m/min Inspection system: Laser measurement system with automatic OK/NOK evaluation and sorting Location: EU

Būklė: naudotas, Naudotas nerūdijančio plieno dviejų pakopų vibruojantis sietas, pagamintas Allgaier-Werke Gmbh & Co KG (Vokietija), modelis TSM 950/3. Korpusas ir kontaktinės dalys iš nerūdijančio plieno. Įrenginys turi 2 sietų pakopas, kurių skersmuo 950 mm, ir ant abiejų pakopų montuoti valomieji guminiai rutuliai. Centrinis viršutinis įvadas ir 3 šoniniai išvadai. Varomas elektros varikliu, kurio galia 1,5 kW, 1430 aps./min., 220/380 V, 50 Hz. Sietas sumontuotas ant anglinio plieno pagrindo. Komplekto sudėtyje yra ir trečioji pakopa su rutuliais be sieto. Nsdpfsyi Ex Nsx Abbowf

Gamybos metai: 2018, būklė: naujas, Maszyny do obierania ziemniaków i warzyw korzeniowych Wydajność: 1 500–2 200 kg/h Warzywa są obierane, myte i polerowane w obrotowym bębnie z użyciem szczotek Automatyczny wyrzut produktu Prosta i skuteczna obróbka: obieranie, mycie, polerowanie Możliwość podłączenia do transportera oraz integracji z linią produkcyjną. Nwsdodv Ednopfx Abbsf Zasilanie: 400V/3-fazowe lub 220V/3-fazowe (standard USA)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: FC24DE9128, įvesties srovės tipas: trifazis, bendras plotis: 2 800 mm, bendras ilgis: 1 800 mm, įėjimo įtampa: 400 V, įėjimo srovė: 32 A, darbinis plotis: 1 800 mm, bendras aukštis: 1 800 mm, kartojimo tikslumas: 0,1 mm, padavimo greitis Z ašis: 100 m/min, pjovimo plotis (maks.): 1 800 mm, pjovimo aukštis (maks.): 25 mm, suslėgto oro jungtis: 6 juosta, 35 C – Lectra Vectorfashion VT-FA-Q2-72 Automatic CNC Fabric Cutting System – 2024/12 For sale is a high-quality automatic CNC fabric cutting system from Lectra, model Vectorfashion VT-FA-Q2-72. This system represents state-of-the-art industrial cutting technology and was commissioned in early 2025. The system was used in professional apparel manufacturing and is designed for high-volume, precision cutting with full CAD/CAM integration. It is a complete large-format cutting solution featuring a vacuum table, automatic cutting head, and computer-controlled system. The machine is fully operational and was documented in production use as of 05.03.2026. Original purchase price was approx. €125,000. Technical Data • Manufacturer: Lectra • Model: Vectorfashion VT-FA-Q2-72 • Type: Automatic CNC Fabric Cutting System • Year of manufacture: 2024/12 • Control: Computerized CNC System (VectorControl) • Cutting process: High-speed knife cutter • Vacuum cutting table with hold-down system • Multi-layer cutting capability • Industrial servo drives • Fully CAD/CAM compatible Electrics & Connections • Power supply: Three-phase (3-phase + Neutral + Protective Earth) • Voltage: 400 V (EU standard) • Current draw: approx. 32 A (depending on vacuum turbine) • Compressed air connection: 6 bar (dry, oil-free air required) Dimensions & Working Area • Working width: 1800 mm (72”) • Maximum cutting width: 1800 mm • Maximum cutting height: approx. 25 mm (compressed with vacuum) • Total width: approx. 2800 mm (incl. control cabinet and operator area) • Total length: approx. 4500 – 5500 mm (depending on output table configuration) • Total height: approx. 1800 mm Performance & Precision • Travel speed (X/Y axis): up to 100 m/min • Repeat accuracy: ±0.1 mm (industry standard) Nedpsy Akbqefx Abbjwf Key Features • High-speed CNC cutting • Precise multi-layer cutting • Advanced vacuum hold-down system • Modular cutting table design • Fully automated, computer-controlled operation • Integrated safety and emergency stop systems • Robust industrial build for continuous operation Condition Used, in production condition Fully functional and tested in real production Viewing before dismantling possible Sale as seen (“as-is, where-is”), without warranty Line Integration The system was operated as part of a complete cutting line together with • 30 C – Spreading / Feeding System • 32 C – Conveyor / Table System All units are available individually or as a complete production line Applications • Apparel industry • Denim production • Workwear and uniforms • Technical textiles • High-volume automated cutting processes Location Valga, Estonia Dismantling and Transport To be organized by the buyer Professional dismantling recommended due to system size

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2011, veikimo valandos: 3 165 h, keliamoji galia: 1 000 kg, kėlimo aukštis: 7 195 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 2 900 mm, pavaros tipas: Elektro, Aukštuminis komplektuotojas Nwsdoy Ekrujpfx Abbjf Stiebo tipas: Triplex Būklė: Paruoštas naudojimui ir visiškai veikiantis Techninė būklė: gera Baterijos įtampa: 48V Baterijos gamybos metai: 2017

Būklė: labai geros būklės (naudotas), Žaliavos priėmimo vandens rezervuaras Akmentašis Dėžių paletinių vartytuvas su konvejeriu Dėžių paletinių plovimo sistema Apsauginės tvorelės Juostinis konvejeris su skirstytuvais, 27 vnt. Nwsdpfox Uqq Asx Abbof Plokščiasis konvejeris, 38 vnt. Būgninė plovykla Platforma Inspekcinis stalas Vibracinis rūšiuotuvas, 2 vnt. Volelinis inspekcinis stalas Hidrokuleris Valdymo pultas Volelinis frakcijų rūšiuotuvas Bufetiniai rezervuarai, 9 vnt. Morkų pjaustyklė Sormac, 3 vnt. Dėžių paletinių sandariklis Sraigtinis konvejeris Aikštelė su laiptais Galima pirkti pasirinktas mašinas Mašinos pagamintos iš rūgštims atsparaus nerūdijančio plieno Kainos nustatomos pagal atskirą mašiną Peržiūrėkite ir kitus mano skelbimus

Būklė: labai geros būklės (naudotas), Iškrovimo aukštis: 3100 mm Užpildymo aukštis: 1870 mm Juostos plotis: 590 mm Padavimo išdėstymo žingsnis: 250 mm Nwedsy D Dtcjpfx Abbsf Padavimo aukštis: 35 mm Bendras aukštis: 3950 mm Mašina paruošta darbui Taip pat kviečiu peržiūrėti kitus mano skelbimus.

Būklė: naudotas, rida: 46 512 km, galia: 125 kW (169,95 AG), pirmoji registracija: 02/2020, kuro tipas: dyzelinas, bendras svoris: 3 500 kg, spalva: pilkas, pavaros tipas: mechaninis, emisijos klasė: Euro 6, sėdimų vietų skaičius: 3, bendras ilgis: 5 981 mm, bendras plotis: 2 059 mm, bendras aukštis: 2 547 mm, krovimo vietos ilgis: 3 350 mm, Gamybos metai: 2019, Įranga: ABS, centrinis užraktas, elektroninė stabilumo programa (ESP), oro kondicionavimas, suodžių filtras,

Būklė: naudotas, rida: 60 km, galia: 77 kW (104,69 AG), pirmoji registracija: 01/2025, kuro tipas: dyzelinas, bendras svoris: 3 140 kg, spalva: balta, pavaros tipas: mechaninis, emisijos klasė: Euro 6, sėdimų vietų skaičius: 3, bendras ilgis: 5 981 mm, bendras plotis: 2 059 mm, bendras aukštis: 2 494 mm, krovimo vietos ilgis: 3 350 mm, krovinių skyriaus plotis: 1 784 mm, krovos erdvės aukštis: 1 886 mm, Gamybos metai: 2023, Įranga: ABS, centrinis užraktas, elektroninė stabilumo programa (ESP), oro kondicionavimas, suodžių filtras,

Būklė: naudotas, rida: 260 000 km, galia: 120 kW (163,15 AG), pirmoji registracija: 10/2018, kuro tipas: dyzelinas, bendras svoris: 3 500 kg, kita apžiūra (TÜV): 04/2027, spalva: balta, pavaros tipas: mechaninis, emisijos klasė: Euro 6, sėdimų vietų skaičius: 6, Gamybos metai: 2018, Įranga: ABS, autonominis šildytuvas, centrinis užraktas, elektroninė stabilumo programa (ESP), navigacijos sistema, oro kondicionavimas, suodžių filtras,