Atsarginių Dalių Sąrašas pirkti naudotą (12 304)

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, A workshop parts washer is a versatile tool that should be present in every service center, garage, or workshop. This indispensable device enables fast and cost-effective removal of contaminants. A significant advantage is its ability to be used indoors. A cabinet parts washer guarantees effective removal of all types of contamination, from oils to hard-to-reach deposits, ensuring both the safety and long-term performance of components. The applied technology not only provides cleanliness but also protects against corrosion. Please note that cleaning results will depend on the detergents used. The parts washer is designed to utilize up to 60 liters of cleaning fluid, with a maximum tank capacity of 80 liters. To achieve maximum efficiency, the pump inlet should be covered during operation. The pump operates with a flow rate of 10 to 12 liters per minute, allowing thorough cleaning of surfaces, including those with fine cracks, using a powerful stream. The liquid is drawn by the pump from the bottom in a closed-circuit system and delivered under pressure through a flexible hose. The workshop washer is equipped with 4 legs, ensuring stable operation and optimized working height. The lid locks automatically when opened. The device also has a worktop below the basin level, which can be used to store washing accessories or cleaned parts to let them dry. The device requires self-assembly. Technical data: Tub capacity: 80L Maximum pump capacity: 10-12 l/min Kledpfxjvugvvj Agfjp Power supply: 230 V Dimensions: 775 x 540 x 915 mm Internal overall dimensions: 710 x 480 x 260 mm Shelf under the basin: 700 x 420 mm Power supply: 230V Weight: 23 kg The price does not apply to machines purchased in Poland.

Būklė: naujas, Gamybos metai: 2026, Properties and Applications Kjdpevxgp Djfx Agfjlp - The body and movable jaw are made of high-quality cast iron - Replaceable, serrated jaw inserts, induction-hardened and ground - The use of a thrust bearing increases the efficiency of the clamping mechanism - Designed for clamping long workpieces using the full length of the machine table - Equipment: handle, positioning keys - Bolt spacing range: 135 - 180 mm, slot width: 18 mm.

Būklė: naudotas, Vibruojanti padavimo sistema, vibruojanti takelis, vibruojanti dalių padavimo sistema, linijinė vibruojanti padavimo sistema, RNA SLL400-400, naudota mašina Gamintojas: RNA Tipas: SLL400-400 Bendri matmenys: Plotis: 675 mm Gylis: 690 mm Aukštis: 1600 mm Elektros duomenys: 230V; 0,60A; 120VA Bunkerio dydis: 500 x 495 mm Vibruojančio takelio dydis: 500 x 100 x 70 mm Kljdpoyrti Ijfx Agfop

Būklė: geras (naudotas), Rotary unit, rotary device, turntable, conveyor belt, container rotating device, welding rotary device, welding fixture - Drive motor: 0.15/0.60 kW Kedpfxoca Iato Agfelp - Rotational speed: 15/64 rpm - Sealed slewing ring - Device is pneumatically tiltable - Dimensions: 2520/800/H380 mm - Weight: 524 kg

Būklė: Defektas atsarginių dalių laikiklis (naudotas), Gamybos metai: 2004, Darbinis slėgis (bar): 210 Įpurškimo jėga (kN): 450 Uždarymo jėga (kN): 2400 Atidarymo eiga (mm): 0–510 Įrankio įrengimo aukštis (mm): 460–800 Kjdpfeyhn Tgjx Agfslp Būklė: Sugedęs – dalims (nuimta plokštė, nuimtas hidraulinis vožtuvas)

Būklė: geras (naudotas), Optimizavimo staklės Paul 11 11MKL KE11 14E MAXI 4.0 Visos dalys. Kainos derinamos individualiai. Kedpfx Ageyi T Raofolp

Gamybos metai: 2019, veikimo valandos: 100 h, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, 400x600 mm arba 300x400 mm vakuuminė panelių surinkimo mašina su LC ir tarpiklių padavimo įrenginiais. Vakuuminis siurblys: sausas siurblys + stiprintuvas Siurblio dydis: 517p x 1 186g x 966a mm Siurblio našumas: 1 900 m3/val Vakuumo diapazonas: 5x10-3 KPa Lygiavimo stotelės blokas: 1) Apatinis UVW 3 ašių lygiavimas 2) Rankinis lygiavimo koregavimas Kedeyganaspfx Agfslp 3) Judesio tolygumas: 100 μm / 300 mm 4) X ašies judesio variklis: servovariklis 5) Y ašies judesio variklis: servovariklis 6) Θ krypties diapazonas: ±3˚

Būklė: labai geros būklės (naudotas), bendras ilgis: 1 500 mm, bendras plotis: 935 mm, bendras aukštis: 1 782 mm, įėjimo įtampa: 400 V, Portioning Machine Stork DTF Model: Masterfill 5 Power: 16 kW Power supply: 400 V, three-phase Operating temperature: -10°C to 40°C 5 pumps 5 nozzles 5 blades Kledpjvzt Ursfx Agfsp Dimensions: 1502.5 x 935 x 1782.65 mm (L x W x H)

Būklė: beveik kaip naujas (naudotas), Švytuoklinio tvirtinimo dalys iš veleno galvos 51:36 388/01 Gamintojas: nežinomas Tipas: Švytuoklinio tvirtinimo dalys iš veleno galvos Pavadinimas: Švytuoklinio tvirtinimo dalys iš veleno galvos Perdavimo santykis: 51:36 Nuoroda: 388/01 Kedpfeyrz Tnsx Agfolp Prekės numeris: 156116 Dalies numeris: 50010002252 Būklė: nenaudota / originalioje pakuotėje Kiekis: 2 vnt.

Būklė: visiškai atnaujintas (naudotas), Pakeičiamas operatoriaus skydelio priekinis dangtis 6FC5203-0AF02-0AA0 0.60000499 00076 SIEMENS Gamintojas: Siemens Serija: SINUMERIK Tipas: operatoriaus skydelio priekinis dangtis Dalies numeris: 6FC5203-0AF02-0AA0 Prekės numeris: 204558 Braižinio numeris: 90210001109 Kledpfx Agjyryggjfsp

Būklė: naujas, Gamybos metai: 2025, Fester Klammernformer CF-25 wurde von unserem Unternehmen für die Produktion von festen Klammern für Stehfalzdächer mit einer Falzhöhe von 25 mm entwickelt. Die folgende Klammer ist das Hauptelement zur Befestigung, mit dem das fertige Dachelement auf der Dachunterkonstruktion fixiert wird. Eine feste Klammer bietet viele Vorteile wie eine einfache Konstruktion, geringe Produktionskosten und eine unkomplizierte Montage. Wir fertigen Klammernformer für 25, 27 oder 39 mm Klammerhöhen. Kodpfjqxadbex Agfslp Als Ausgangsmaterial können Metallbänder mit der erforderlichen Breite und einer Dicke bis zu 0,8 mm verwendet werden. Der Klammerformer stellt das Produkt in einem einzigen, einfachen Arbeitsgang her – dazu muss lediglich das Blech in die Presse eingelegt und der Pressvorgang manuell ausgelöst werden. Der Klammernformer biegt die Klammer und stanzt die erforderlichen Löcher in nur einem Schritt. Mit unserer Klammerpresse hat der Anwender die Möglichkeit, Festklammern in beliebiger Stückzahl selbst zu produzieren – entweder für den Eigenbedarf oder zum Verkauf an Dachdeckerbetriebe. Der feste Klammernformer ist leicht und dadurch mobil und einfach zu transportieren. Für einen produktiven Einsatz muss der Klammernformer sicher auf einer ebenen Fläche fixiert werden. Die von uns gefertigte Klammerpresse CF-25 spart Ihnen Zeit und Kosten für die Beschaffung von Stehfalz-Befestigungselementen, hilft Ihnen, Ihre eigene Fertigung effizient zu organisieren und erleichtert die Dachmontage. Wir produzieren ebenso Schiebe-Klammernformer. Optional können wir einen festen Klammernformer für Stehfalzelemente mit 25, 27 oder 39 mm Falzhöhe liefern, die Sie auf folgenden Maschinen fertigen können: - Stehfalz-Profiliermaschine F3 - Dachpaneel-Stehfalz-Rollformer F3-27 mit Klammerprägung - Stehfalz-Rollformer F3-39

Būklė: naudotas, CNC control, Numeric Control, from MAX MÜLLER GILDEMEISTER MD 5S, type Eltropilot M Year of manufacture: approx. 1980 Rack with 20 module slots - 12 modules installed Installed modules: 1 pc. 0.651.406-19.3 UNI Universal Interface 1 pc. 0.650.847-56.1 O32 Output Card 2 pcs. 0.651.708-57.3 I32 Input Card Kledpfx Ajflrtxsgfjp 1 pc. 0.652.138-36.1 APC 1 pc. 0.651.928-25.3 LAB Position Controller 1 pc. 0.651.400-22.3 1 pc. 0.860.204-59.1 B32 1 pc. 0.652.128-35.0 RE4 1 pc. 0.651.269-26.0 ITY Serial Interface 1 pc. 0.651.974-23.2 ABS Termination Card 1 pc. 0.651.298-18.3 CPU Central Processor Dimensions (W x H x D): 480 x 260 x 220 mm Weight: 7 kg Individual cards available on request.

Būklė: naudotas, 12-piece die block for GEWA press brake Press brake tool, lower tool Type: 0255/14 Prism size: 16 mm for 90° Prism angle: 88° Die depth: approx. 8 mm Overall height: 120 mm Max. pressing force per meter: 100 t/m Die foot width: 60 mm Total length: 4,175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Kodpfswbvmiox Agfslp Very good condition

Būklė: naudotas, Permanent magnet DC servo motor SIEMENS Type: 1 HU3074-0AC01-Z Serial No.: B J157 1047 01 008 Voltage = 167 V DC Power = 1.8 kW Current = 12.5 A Max. speed = 2000 rpm Nominal torque = Mo 7 Nm Shaft diameter: 24 mm Kodpfx Agjuch N Ijfelp Shaft length: 50 mm Centering diameter: 130 mm Bolt circle diameter: 165 mm / 4 x 11 mm holes - Shaft with 8 mm keyway Housing dimensions (L/W/H): 335 x 140 x 145 mm Weight: 23 kg Good condition

Būklė: geras (naudotas), Saw frames, guide rails, connecting rods, feed rollers, new roller shafts, rack gears, new rack heads, roller lift hydraulics, gate stands with overhang plates, reciprocating frame flywheel assembly, fixed and idler pulleys with bushings, and many more parts Klodjwhv Rnopfx Agfsp

Gamybos metai: 2004, būklė: naudotas,

Būklė: geras (naudotas), Sriegiklio komplektas, rankinis vamzdžių sriegiklis, sriegimo staklės, vamzdžių sriegiklis, sriegimo galvutė, veržliaraktis Ksdpfsyk Upyex Agfelp -Sriegiklio rinkinys: 47 dalių / vidiniai ir išoriniai sriegiai -Dydis: nuo M3 iki M20 -Atskiri komponentai: žiūrėkite nuotraukas -Matmenys: 500/420/H85 mm -Svoris: 9,1 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Tipas: KMRS-200 Serijos numeris: 17508-001 Pagaminimo metai: 2016 Našumas: 700 vnt./val. Juostos plotis: 325 mm Pjovimo žiedo skersmuo: 270 mm Kjdpfx Agoypbzaofslp CIP įrenginys: karštas vanduo min. 60°C Suspaustas oras: 5 bar, 3,5 Nm³/val. Galia: 3 x 400V, 50Hz, 2kW Matmenys: 1600 x 1150 x 1500 mm

Būklė: naudotas,

Būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, bendras svoris: 300 kg, bendras ilgis: 1 300 mm, bendras plotis: 1 300 mm, bendras aukštis: 2 900 mm, Nėra minimalios kainos – garantuotas pardavimas aukščiausią kainą pasiūliusiam! Pasiūlymo pateikimas įpareigoja laiku atsiimti prekę – arba nuo 2026-05-11 iki 2026-05-13, arba nuo 2026-05-18 iki 2026-05-21! Parduodamas judantis smulkių detalių karuselis su įvairių spaudimo priemonių, srieginių strypų, veržlių ir spaudimo plokščių atsargomis! ĮRANGOS DUOMENYS Kjdpfjyn Elmsx Agfjlp Matmenys ir svoris Matmenys (I x P x A): 1 300 x 1 300 x 2 900 mm Svoris: 300 kg Išorinis nuorodos numeris: Lot 10 / Wittner

Būklė: dilaminuotas dirbtuvėje (naudotas), Refurbished machine with new LTG control system StoreControl L Optional control system expansion available 6 identical machines available External dimensions: Construction height: 6,900 mm Construction width: 1,580 mm Construction depth: 2,680 mm 80 carriers, each with a load capacity of 250 kg with usable internal dimensions: Width = 1,250 mm Depth = 825 mm Height from 0 to 750 mm Total load capacity up to 20,000 kg Operating opening starts at 860 mm above finished floor level (FFL), then 1,000 mm high Color: Grey / Dark grey, carriers Sendzimir galvanized Surface cleaned, signs of use and minor deformations possible Performance data: Vertical drive: 1 x 2.2 kW / 400 Volt Horizontal drive: 1 x 0.25 kW / 400 Volt Additional features: Manual lift door Subject to errors, technical changes, and deviations from photos Pictures are of identical machines Delivery and installation currently mainly in Germany, Austria, and several neighboring countries Ksdpfx Agjrvkq Eofolp

Būklė: dilaminuotas dirbtuvėje (naudotas), Modernized machine with new LTG control system StoreControl L External dimensions: Construction height: 10,000 mm Construction width: 1,600 mm Construction depth: 2,680 mm 45/90 carriers, each with 250 kg load capacity Kjdpfx Aorvkrfjgfjlp in usable clear dimensions: W = 1,250 mm D = 825 mm H from 0 to 750 mm Total load capacity up to 20,000 kg Operator opening starts at 865 mm above FFL, then 850 mm high Color scheme: GREY / BLUE, carriers Sendzimir galvanized Surfaces cleaned, signs of use and minor deformations possible Performance data Vertical drive: 1 x 2.2 kW / 400 Volt Horizontal drive: 1 x 0.29 kW / 400 Volt Additional features: Manual lift door Subject to errors, technical modifications, deviations from photos Photos show similar machine Delivery and installation currently mainly in Germany, Austria and several neighboring countries

Būklė: dilaminuotas dirbtuvėje (naudotas), modernized machine with new LTG control system StoreControl L External dimensions: Construction height: 9,500 mm Construction width: 2,200 mm Construction depth: 2,700 mm 58 carriers, each with a load capacity of 190 kg with usable clear internal dimensions: W = 1,850 mm Kljdpfx Agodnlkhefjp D = 825 mm H from 0 to 750 mm Total load capacity up to 20,000 kg Operator opening starts at 900 mm above finished floor level, then 850 mm high Color: GREY / BLUE, carriers sendzimir-galvanized Surfaces cleaned, signs of use possible Performance data Vertical drive: 1 x 2.2 kW / 400 Volt Horizontal drive: 1 x 0.25 kW / 400 Volt Additional features: Manual lifting door Subject to errors, technical modifications, and variations from photos Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Būklė: dilaminuotas dirbtuvėje (naudotas), Currently, 2 identical machines available Mechanically refurbished machine equipped with new LTG StoreControl L control unit External dimensions: Installation height: 5,200 mm (modification possible at additional cost) Installation width: 1,600 mm Installation depth: 2,800 mm Kjdpfod Hxpvox Agfjlp 38 carriers, each with a load capacity of 250 kg with the following usable dimensions: W = 1,300 mm D = 825 mm H from 55 to 750 mm Total machine load capacity up to 2 x 10,000 kg Operator access opening starts at 875 mm above finished floor level (FFL), with an access height of 875 mm Colour scheme: GREY / BLUE, carriers sendzimir-galvanized, surfaces cleaned, signs of use possible Performance data: Vertical drive 1 x 3.5 kW / 400 Volt Horizontal drive 1 x 0.75 kW / 400 Volt Subject to errors, technical modifications, and deviations from pictures Delivery and installation currently mainly offered in Germany, Austria, and several neighboring countries

Būklė: dilaminuotas dirbtuvėje (naudotas), modernized machine with new LTG control system StoreControl L currently 6 identical machines available External dimensions: Klodpfx Agod Sphijfop Overall height: 4889 mm Overall width: 2785 mm Overall depth: 2810 mm Maximum load capacity per machine: up to 2 x 15,000 kg 63 carriers with central web, each with up to 400 kg payload with usable internal dimensions: W = 2460 mm D = 825 mm Usable height: from 55 up to 750 mm Access opening starts at 875 mm above finished floor level, then 875 mm high Motor power ratings Vertical drive: 6 kW / 400 Volt Horizontal drive: 0.55 kW / 400 Volt Paint finish: grey/blue Surface cleaned, normal signs of use possible Subject to errors and technical changes or deviations in details/photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.