Atsarginių Dalių Sąrašas pirkti naudotą (804)

Sąlyga: naudotas, Pistons 3 pcs Ø 106.5 mm diesel engine - Pistons: Ø 106.5 mm Dsdpfjb A S Dyox Af Hjku - Piston height: 112 mm - Piston pin: Ø 41.278 mm - Total price: 3 pieces - Weight: 1.4 kg/piece

Gamybos metai: 2024, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Ø 110-450 mm, maximum wall thickness 72 mm. Servo-driven steel feed and synchronization. NEW, unused. Dedpfx Afet A Ufde Hsku

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 20250107, bendras ilgis: 2 000 mm, bendras plotis: 1 900 mm, bendras aukštis: 3 050 mm, bendras svoris: 1 000 kg, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, įėjimo dažnis: 50 Hz, šildymo galia: 24 kW (32,63 AG), garantijos trukmė: 12 mėnesiai, didžiausias leistinas svoris: 700 kg, ruošinio svoris (maks.): 700 kg, narvo dydis: 1 390 mm, naudojamas aukštis: 800 mm, Single-stage cleaning machine Operating principle, machine with lifting door The tank of the cleaning machine is manually filled with tap water (optionally via the automatic filling valve AR-2) and heated by means of heating elements and thermostat settings. The time settings for the phases washing, dripping (optionally drying and steam extraction) are set via the “PROCESS TIMER”. The parts are placed on the loading rack or loading trolley and pushed into the cleaning chamber. Optionally, for heavy loads, a conveyor belt (MIU / AIU) can be installed to transport parts into the cleaning cabin. The lifting door is closed, the machine is started, and the wash pump delivers the cleaning fluid onto the items to be cleaned via the rotating spray systems. The rotation of the upper and lower spray pipes is activated by the reaction force of the reaction nozzle located at one end of the spray pipe. The rotational speed can be adjusted with a screw in the reaction nozzle. Optionally, the rotation of the upper spray pipe can be motorized and the spray pipes equipped with nozzles. After the washing time has elapsed, a short dripping phase follows, during which the used cleaning fluid is returned to the wash tank via the filter baskets. Optionally, the cleaning fluid from the washing stage can be filtered using a filter unit (EFG-6 or PP197). An additional stage such as pre-washing or rinsing is optionally possible via the fixed spray pipes NS-2 / NS-TEMP. In this case, the parts are rinsed with fresh water (cold or heated), which is drained via the drain valve. Optionally, the parts can be dried after cleaning using a drying unit. After the cleaning process, the lifting door is partially opened for steam extraction. The steam from the cleaning chamber is either extracted using the steam extractor (DF-250S) or condensed and returned to the tank via the steam condenser (FX6002). Both accessories are optional and not part of the standard machine equipment. After the steam extraction time has elapsed, the lifting door opens fully and the cleaning process is finished. Optionally, the lifting door can be equipped with a safety bar that automatically stops the door if an object is detected in the doorway. Djdpfsvvuzcox Af Hsku The cleaned components can be removed from the cleaning cabinet onto a loading area or a loading trolley.

Sąlyga: geras (naudotas), Manufacturer: TecnoMagnet Model: SQ Year of manufacture: 2000 Includes 12 magnetic tables and 1 control unit Electropermanent magnetic clamping system Suitable for clamping all types of workpieces, such as: - Face milling - Lateral drilling - Round bar facing and slot drilling - Coupled parts machining and forged parts machining - Edge milling and chamfering - Plate machining at right angles - Flattening through drilling and pocket execution Separate MCC control box with quick-connect Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (estimated) Length: 1000 mm Width: 500 mm Height: 55 mm Dedpswpucfofx Af Hsku Weight: 140 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend verifying all important details.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, 12 pieces new DEMAG rope guides / rope guide for crane hoist Dodpfjv T Tq Dsx Af Heku Suitable for DH2000, DH1000, DH500, DH300 New Including: 3x DH2000/DH1600, 3x DH1000/DH1200, 3x DH500/600, 3x DH300/400 Information: We have over 20,000 DEMAG spare parts in stock! Check out my other listings from our warehouse inventory!

Sąlyga: paruoštas naudoti (naudotas), Maschine zur Montage von Schraubenteilen wie Bolzen und Muttern Dsdpfjkt N Irox Af Hsku

Sąlyga: naudotas, Collet sleeves, collet, tool holder, tool mount, milling arbor, milling tool, clamping sleeves - Quantity: 11 clamping sleeves - Various sizes - Bore: Ø 5–28 mm - Length: 64 mm - Shank: Ø 32 mm - Recess: Ø 38 mm - Sale: only as a set Djdpfxob A Sbkj Af Hjku - Weight: 2 kg

Gamybos metai: 2025, Sąlyga: beveik kaip naujas (parodų įrenginys), Spray Cleaning System – Parts Washing Machine with Hinged Door Single-tank design (Washing), tank capacity 320 liters Basket: LxW 1,100 x 1,100 mm Usable height: 800 mm Max. loading weight: 700 kg Washing pump pressure: 4.3 bar, pump output: 5.5 kW Heating (electric) 20 kW; heatable up to 80°C Control system: Siemens Logo Includes: - Steam extraction and condensate return system - Automatic water refill - Automatic chemical dosing (adjustable 0.8–5.5%) - Full system insulation - Entire system constructed from stainless steel 1.4301 - Basket rim (removable on one side) - 7-day timer for electric heating - Electric spray pipe, h = 450 mm - Preparation for oil separator (electrical & mechanical) provided Dkodpfx Aod Rkmxof Heu New machine; currently being used for washing trials in our technology center.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2018, The parts buffer / selector DepotMini C316 stores small parts in defined batches directly at a Swiss-type lathe. Ideal for storing small parts with diameters of 1 - 10 mm. Can also be used as a single-part buffer. Disc diameter: 300 mm Storage capacity: 16 containers Storage volume per container: approx. 0.1 liters Roller trolley Fixed infeed height: approx. 82 cm Djdpfx Afjwv R Iqe Hsku The controller enables operation by quantity, M-code, or timer, providing maximum flexibility. Controller with magnetic mount Ideal for Swiss-type lathes from manufacturers such as Citizen, Star, Tornos, Traub, Hanwa, etc. The device operates autonomously and does not require an electrical interface to the lathe.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 19 2-11 001, Top-loading spray washing system TRA-S 1100 (2-tank) Dkodpfx Aov D Iyujf Hju

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2002, veikimo valandos: 38 650 h, Funkcionalumas: visiškai funkcionalus, Solvent system, completely overhauled. 3 tanks. Processes: immersion with ultrasound, spraying, vapour degreasing, vacuum drying. Integrated distiller with automatic oil discharge. Automatic loading 5+5. Basket dimensions: 4x T520 x W320 x H200 mm. Tank capacity: 1000L. Dodpfjwndu Usx Af Hsku

Sąlyga: visiškai atnaujintas (naudotas), The machine divides the dough into 30 uniform dough pieces and rounds them, resulting in high product quality. Dkedjvllnlspfx Af Hju

Sąlyga: naudotas, Roller conveyor, conveyor track, roller conveyor belt, roller track - Roller conveyor: 2-piece, 1.8/1.5 m / 1 section mobile with material brake - Roller width: 490 mm - Rollers: Ø 80 mm Dkodeu Uwwrepfx Af Hou - Roller pitch: 200 mm - Price/offer: complete - Dimensions: 1800/520/H970 mm / 1500/640/H290 mm - Weight: 78 kg / 35 kg

Gamybos metai: 2025, Sąlyga: naujas, Parts Cleaning System, Spray Cleaning Machine Type L90 Automatically operating hot water parts washer with automatic basket drive via geared motor, stainless steel wash pump (make: Lowara), circulating 3-sided spray system (from below, side, and above) with stainless steel nozzles - Basket diameter: 790 mm Dkjdjhgh I Sjpfx Af Hou - Useful height: 500 mm - Max. load weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (room temp. – 90°C) Machine dimensions (LxWxH): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Washing cycle timer adjustable via Omron timer (minutes and hours) Complete cleaning system (interior and exterior cladding) made from stainless steel 1.4301 Water circulation system and loading basket made from stainless steel 1.4301 Full system insulation (tank and cabin) made from stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 micron) Suction filter for pump protection Operating hours counter Steam extraction including condensate return Prepared for later installation of an oil separator The parts washer is as new, never used. OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST!!!

Sąlyga: naujas, Gamybos metai: 2023, Tipping equipment designed for installation in various types of facilities. Suitable for turning large and heavy components. Dedpfx Afsr Hbu Ee Hjku

Sąlyga: naujas, Gamybos metai: 2024, SJET serija – universaālas industriālās detaļu mazgāšanas iekārtas ar ļoti vienkāršu vadību. Rotējošā galda mazgātājs. Rotējošā galda detaļu mazgātājs. Ideālas detaļu mazgāšanas sistēmas attaukošanai un uzturēšanas tīrīšanai. Darbības princips: Pēc tam, kad grozs ir ievietots iekārtā, uz griežamā groza tiek izsmidzināts karsts ūdens ar tīrīšanas līdzekli. Speciāli uzstādītas nerūsējošā tērauda sprauslas un groza rotācija nodrošina pilnīgu visu detaļu tīrību groza iekšpusē. Pirms ūdens atgriežas tvertnē, tas tiek filtrēts, kas pagarina tīrīšanas līdzekļa kalpošanas laiku un samazina izmaksas. SJET sērija samazina ūdens un ķīmisko līdzekļu patēriņu un palīdz jums saudzēt vidi. SJET iekārtas tiek ražotas no AISI 304 nerūsējošā tērauda. Pieejami dažādi grozu izmēri un tilpumi. Pieejamas skalošanas un žāvēšanas iespējas. Pieejami dažādi vāku veidi. Rotējošā groza mazgātājs. Dsdpfx Ajd I Aw Esf Hsku Papildu informācijai un iespējām, lūdzu, sazinieties ar mums.

Sąlyga: naudotas, Roller conveyor, conveyor track, roller conveyor belt, roller path - Roller conveyor: 18 pieces, 5x 2.1 m / 13x 1.625 m - Roller width: 585 mm - Rollers: Ø 57 mm Dkedpfxju Uwvbj Af Hsu - Roller pitch: 340 / 500 mm - Price/sale: complete - Transport dimensions: 2100/610/H880 mm / 2100/610/H490 mm - Weight: 238 kg / 128 kg

Gamybos metai: 2025, Sąlyga: naujas, Parts Cleaning Machine, Spray Cleaning System Type L800FP Fully automatic hot water parts washing machine with basket drive powered by gear motor, housing made of stainless steel 1.4301, piping and rotary basket galvanized steel, special nozzle system with stainless steel flat jet nozzles, wash pump made of stainless steel (manufacturer: Xylem/Lowara), level control for dry-run protection, - Basket diameter: 780 mm - Effective height: 500 mm - Max. load capacity: 150 kg - Spray pressure: 3 bar - Tank volume: 120 liters - Heating: electrically adjustable (room temperature up to 60°C) System dimensions (LxWxH): 1,160 x 1,200 x 1,750 mm Suction filter for pump protection Dkjdpsfzblqjfx Af Hsu Delivery: ex works, FCA

Sąlyga: naujas, Masinės gamybos skalbimo mašina, kurioje dalys transportuojamos kabinamos ant konvejerio su pakabomis ir plaunamos praleidžiant per tunelius. Plovimas atliekamas purškiant arba panardinant naudojant ultragarsinį mirkymą. Darbo principas: Dalys yra perkeliamo pakabinant ant viršutinio konvejerio kablių. Bendras proceso ciklas: Plovimas – Skalavimas – (pagal poreikį) Ultragarsinis imersinis plovimas – Džiovinimas Dsdpfx Ajd I E Itjf Heku Visos HANGWASH sistemos yra gaminamos pagal individualius poreikius ir turi daugybę pritaikymo galimybių, priklausomai nuo jūsų reikalavimų. Norėdami gauti daugiau informacijos, maloniai prašome susisiekti su mumis.

Sąlyga: geras (naudotas), Roller conveyor, conveyor lane, roller conveyor belt, roller track - Roller conveyor: 7 sections, 3 x 1.99 m / each 1 x 1.915 / 1.415 / 2.39 / 1.095 m Dkodpfx Afsv Icvfo Hou - Total length: 12.78 m - Roller width: 625 mm - Rollers: Ø 90 mm - Roller pitch: 100/200 mm, see photos - Price/sale: as a complete set - Transport dimensions: 2390/800/H1580 mm - Total weight: 940 kg

Gamybos metai: 2025, Sąlyga: naujas, Parts Cleaning Machine, Spray Cleaning System Type L901FP Fully automatic hot-water parts washer with basket drive powered by geared motor. The housing of the unit is made of stainless steel 1.4301; all piping and rotating basket are zinc-plated steel. Special nozzle system equipped with stainless steel flat spray nozzles. Washing pump made of stainless steel (manufacturer: Xylem/Lowara). Level control for dry-running protection. - Basket diameter: 910 mm - Usable height: 520 mm - Max. load weight: 150 kg - Spray pressure: 3 bar - Tank capacity: 190 liters - Heating: electrically adjustable (ambient temp. to 60°C) System dimensions (LxWxH): 1,300 x 1,350 x 1,990 mm Suction filter for pump protection Dsdpfxefl Ufze Af Hoku Delivery: ex works, FCA

Gamybos metai: 2023, Sąlyga: naujas, Spiralinis plovimo įrenginys, skirtas smulkiosioms dalims, pvz., varžtams, veržlėms, sraigtams, valyti. Tunelinis spiralinis plovimo įrenginys: dalys įkeliamos per vibracinį stalą ir transportuojamos spiraliniu konvejeriu. Galimi plovimo, skalavimo ir džiovinimo režimai. Dkedpfxsfhb Ico Af Hsu Smulkiųjų detalių plovimo įrenginys. Automatinė plovimo mašina, skirta smulkių detalių, štampuotų detalių plovimui, spiralinis plovimo įrenginys, varžtų ploviklė, veržlių plovimo įrenginys, sraigtų plovimo įrenginys.

Sąlyga: geras (naudotas), Base plate, construction fence foot, barrier foot Dksdpjwlgb Eefx Af Hsu - Manufacturer: Schake TL base plate, made of plastic, 19 pieces - Insert pockets / dimensions: see photos - Price / delivery: as a complete lot - Transport dimensions: 1300/870/H780 mm - Total weight: 566 kg

Sąlyga: naujas, Gamybos metai: 2024, Kabinen-Typ Teilewaschanlage für die präzise Reinigung von Metallteilen. INTERSONIK ROTAWASH ist eine kabinenartige Teilewaschanlage, die eine präzise Reinigung und perfekte Trocknung gewährleistet. Ihre Wirksamkeit ist insbesondere in der Automobilindustrie, speziell bei der Motorblockreinigung und Zylinderkopfreinigung, nachgewiesen worden. Funktionsprinzipien: Dedpsd I A Hrjfx Af Hsku - Effektive Reinigung aller Oberflächen des Werkstücks durch Hochvolumen-Sprühverfahren und schnelle Flüssigkeitszufuhr in die Kabine. - Durch Rotationsbewegung werden auch komplizierte Oberflächen, Ölkanäle, Sacklochbohrungen und Wassermäntel des Werkstücks vollständig gereinigt und getrocknet. - Das hermetische Betriebssystem verhindert die Ausbreitung von während des gesamten Betriebs entstehendem Wasserdampf. - Der gesamte Waschprozess wird über eine SPS-Steuerung kontrolliert. Weitere Details: - Die Maschine verfügt über eine stabile und langlebige Gehäusekonstruktion. - Das automatische Wasserzulauf- und Dosiersystem für Reinigungschemikalien sorgt für minimalen Wartungsaufwand und maximale Betriebseffizienz. - Alle mit Wasser in Berührung kommenden Oberflächen bestehen aus Edelstahl. - Gehäuseabdeckungen und Schalttafeln sind aus epoxidbeschichteten Stahlblechen gefertigt, was eine lange und unterbrechungsfreie Lebensdauer garantiert. - Optional erhältlich ist auch die Integration eines Ultraschallsystems. Anwendungsbereiche: Motorblockreinigung, Powertrain-Reinigung, Hochdruckwaschanlage, Rotationswaschanlage, Kabinenwaschanlage, Teilewaschanlage, Lösungsmittelwascher. Für weitere Optionen und Details stehen wir Ihnen gerne zur Verfügung.

Sąlyga: naujas, Gamybos metai: 2024, SOLWASH è una lavatrice per componenti di tipo cabinato, a ciclo chiuso ed ermetico, progettata per la produzione in serie. Utilizza esclusivamente solventi clorurati o alcol modificato. Principio di funzionamento: I pezzi vengono caricati in un cestello posizionato davanti al rulliere della macchina. Il cestello viene trasferito manualmente o automaticamente all'interno della camera di lavaggio. Il ciclo di lavaggio viene avviato selezionando il programma desiderato dal menu PLC. Il flusso di processo standard prevede: lavaggio a spruzzo – lavaggio a ultrasuoni – risciacquo – lavaggio e asciugatura. Durante il funzionamento, il solvente viene automaticamente rigenerato e riciclato. Aree di applicazione: Dksdod I E Iujpfx Af Hsu Componenti da fusione di precisione, parti in rame e ottone, componenti che richiedono lavaggi e asciugature di precisione. Settori: Industria della lavorazione dei metalli – Industria automobilistica – Industria della stampa. Tutte le SOLWASH sono realizzate su misura, con un’ampia gamma di opzioni disponibili secondo le esigenze del cliente. Pulizia con solvente, lavatrice cabinata per componenti, cabina di lavaggio, macchina lavapezzi a solvente, lavatrice a solvente Per informazioni tecniche e specifiche, non esitate a contattarci.