Atlas 1604 pirkti naudotą (484)

Sąlyga: beveik kaip naujas (naudotas), Here we offer you a weathering test device. The Xenotest Beta+ is a premium xenon chamber tester featuring a rotating sample carousel and an exposure area of 4,000 cm². It is equipped with a full suite of parameter control options. Irradiance and temperature are measured and controlled directly at the sample level using XENOSENSIV sensor technology. The Beta+ meets the vast majority of industry standards. Thanks to its large test chamber and high reliability, it is ideally suited for larger sample quantities or oversized specimens. - 3x 2200 W air-cooled xenon lamps - 4,000 cm² exposure area - High irradiance testing up to 120 W/m² (2 suns) - Touchscreen with color display for monitoring and display of test parameters - Direct setting and control of irradiance (300–400 nm) - Direct setting and control of black standard temperature - Direct setting and control of chamber air temperature - Direct setting and control of relative humidity - Diagnostic message display - Storage for 10 user-defined test methods - Pre-programmed international standard test procedures - Multilingual user interface - Aging-resistant XENOCHROME filters for simulation of outdoor daylight and indoor daylight behind glass - On-rack XENOSENSIV 300–400 nm for measurement and control of irradiance (in W/m²) and BST (°C) at sample level - Selectable temperature control via chamber air temperature (max. 70 °C) or dual control: chamber air temperature and black standard temperature (up to 130 °C) - Fan-assisted temperature differential between chamber and black standard temperature - Ultrasonic humidification system for humidity regulation - Sample spray system with integrated 60-liter water tank - Outer cylinder made of special UV glass - Automatic shutoff by total irradiance, exposure time, or cumulative operating time - Advanced auto start functions - Data output via memory card or RS232 interface - Ethernet interface for connection to internal computer networks and use with XenoTouch Add-Ons 1, 2, and 3 (remote operation, email service, online monitoring) Gjdpfx Ajihfrrjbmouk Dimensions: Width x Depth x Height: 900 x 1200 x 1800 mm Weight: 400 kg Type: Xenotest Beta+ Condition: used Scope of delivery: (see image) (Specifications and technical data subject to change and errors reserved!) Please feel free to contact us by phone for further questions.

Sąlyga: labai geros būklės (naudotas), GAMINTOJAS ATLAS COPCO Gsdpsxtblxefx Abmouk TIPAS GA132VSD FF SERIJOS NR. APF136837 METAI 2008 GALIA (kW) 153 NAŠUMAS (m3/min) 22,9 m3/min - 381 l/s SLĖGIS (bar) 8,5 KEITIKLIS taip INTEGRUOTAS DŽIOVINTUVAS taip ŠILUMOKAITIS ne AUŠINIMAS (ORAS/VANDUO) oras ANT REZERVUARO ne DOKUMENTAI ne PRISIJUNGIMAS 2 NAUJAS/NAUDOTAS NAUDOTAS

Sąlyga: naudotas, rida: 1 001 km, pirmoji registracija: 01/1993, spalva: juodas, vairuotojo kabina: kitas, pavaros tipas: kitas, Gamybos metai: 1993,

Sąlyga: geras (naudotas), Gamybos metai: 2012, 2 Atlas Copco ZS75+ VSD kompresoriai 86,5 kW Be alyvos Metai: 2012 Gjdpfsx A In Eox Abmjuk Kaina: 12 500 € už vienetą

Sąlyga: naudotas, Gamybos metai: 2006, veikimo valandos: 14 754 h, Įranga: visų varančiųjų ratų pavara,

Sąlyga: naudotas, Gamybos metai: 2010, veikimo valandos: 2 635 h, 2010 | Atlas Copco Boomer XE3C with COP 1838, very good condition, one defect (EPIROC) | Drilling Rig | 2,635 hours 📍Location: Switzerland, Weite Godpfx Aboxzhf Ismouk 🚛 Delivery available to your location – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 98,000 or Make an Offer. Payment on delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 49 inspection points: 46 approved ✅ 2 minor imperfections ℹ️ 1 issue ⚠️ 📌 Inspector's Comment: Honest machine from a two-shift operation, three drilling arms, one additional operator’s platform – no maintenance backlog. Drive axle "snapped in one go", no evidence of gear tooth deterioration, presumed to be a shaft fracture, no external fractures of the differential housing or axle mounts, casting in good condition. 📄 Want to see the full inspection report, extra photos, or a video? Tip: The reference "39154 Equippo" is commonly used for looking up more details online. 💡 Why this machine and our service stand out: ✔ Thorough professional inspection ✔ Jobsite delivery available ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Sąlyga: geras (naudotas), Atlas Type: Xenotest Alpha LM High Energy Weathering Test Device Atlas Xenotest Alpha LM is a universal weathering instrument for testing the lightfastness and weather resistance of materials under normal, high-temperature, and high-performance conditions. XENOCHROME Filter XENOSENSIV Gear Unit Gedpfxeuuarye Abmsuk Lamp output control in W/m² Sample chamber temperature regulated up to 70°C Measurement sensors at sample level: XENOSENSIV E(300-400 nm) and SST Stationary sensor for sample chamber temperature and relative humidity Humidification Spray function Water supply with integrated water tank Electrical configuration: 230V, 50/60Hz Absorption Filter 7 IR: Steady-state 40 - 140 W/m² / Cyclic 21 - 72 W/m² Window Glass 10 FG: Steady-state 40 - 110 W/m² / Cyclic 21 - 57 W/m² Absorption Filter 4 IR + 3 Window Glass: Steady-state 40 - 140 W/m² / Cyclic 21 - 72 W/m² Absorption Filter 6 IR + 1 UV: Steady-state 40 - 140 W/m² / Cyclic 21 - 72 W/m² Relative electrical performance without XENOSENSIV sensor: continuously regulated to the set value: 53 - 120 % Sample chamber temperature: 20 - 70°C (depending on selected filter configuration) Black standard temperature: Steady-state 25 - 130°C / Cyclic 25 - 100°C Relative humidity: 10% - 95% Fan speed: 500 - 2500 rpm Dimensions: 900 x 780 x 1800 mm Condition: used Scope of delivery: (see photo) (Specifications and technical details subject to change and possible errors!) Further questions can be answered by phone.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Centrinė kompresorių sistema | Atlas Copco GA55VSD sudaryta iš: - 2 sraigtiniai kompresoriai Atlas Copco GA55 VSD+ - Galia po 55 kW (reguliuojamo greičio, alyva įpurškiami, 400V/50Hz, oru aušinami), kiekvieno svoris 876 kg - 2 šaldymo oro džiovintuvai Atlas Copco FD 220 VSD (reguliuojamo greičio, 400V/50Hz, oru aušinami), kiekvieno svoris 143 kg Gjdpfxjxn Shas Abmouk - Suslėgto oro talpykla Lohenner, talpa 5 000 litrų, 11 bar, metalas, cinkuotas, vertikalus - Alyvos/vandens separatorius OSC 300 Clay Apžiūra galima bet kada iš anksto susitarus. #Žymos: AtlasCopco | GA55 | FD220

Sąlyga: geras (naudotas), Gamybos metai: 2020, veikimo valandos: 18 526 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: API842024, bendras svoris: 500 kg, bendras ilgis: 1 280 mm, bendras plotis: 900 mm, bendras aukštis: 1 600 mm, galia: 26 kW (35,35 AG), sukimosi greitis (maks.): 6 500 aps./min, ATLAS COPCO GA 26 VSD+FF kompresorius Guodpexw Ugqefx Abmjk - maks. slėgis: 2,75 bar - našumas: 5,1 m³/min - įtampa: 400 V - dažnis: 50 Hz Dėmesio: Prekė privaloma atsiimti tarp 2026-01-19 ir 2026-01-23 sutartu laiku. FCA D-76571 Gaggenau – pakrauta į sunkvežimį

Sąlyga: naudotas, kuro tipas: dyzelinas, kuras: dyzelinas, Gamybos metai: 2014, veikimo valandos: 3 500 h,

Sąlyga: naudotas, Gamybos metai: 2004, Technical details: Operating pressure: 9.75 bar Output capacity: 10.1 l Total power requirement: 5.5 kW Volume flow: 10.1 m³/min Operating hours: 26,071 h Motor speed: 3,000 rpm Protection class: CE 0038 Machine weight approx.: 310 kg Dimensions (L x W x H): 1.2 x 0.6 x 1.0 m Condensate separator installed. Limitation: Overload valve does not switch off automatically. Sale as is. Gedpou Szluefx Abmeuk

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, veikimo valandos: 114 000 h, bendras svoris: 4 400 kg, galia: 250 kW (339,91 AG), tūrio srautas: 2,802 m³/val, darbinis slėgis: 10 juosta, Regularly serviced, in excellent condition. Atlas Copco ZR250 screw compressor, 10 bar 46 m³/min oil-free, water-cooled. Gedpfx Asrp D Uxebmjuk MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Model: ZR 250 Year of manufacture: 2004 Loaded operating hours: 114,000 Max. operating pressure: 10 bar Single-stage drive Cooling water consumption: 3.7 liters/s Free air delivery: 43.6 m³/min Water-cooled Oil-free Power rating: 250 kW Mains voltage: 400 V 50 Hz 445 A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Model: MD 600 W Year of manufacture: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters Machine dimensions: Length: 3,000 mm Width: 1,600 mm Height: 2,000 mm Weight: 4,400 kg

Sąlyga: labai geros būklės (naudotas), Atlas Type: CI3000+ Ci3000+ Weather-Ometer / Fade-Ometer Model: CI3000W Year of manufacture: 06/2022 Operating hours: Device 816.5 h Lamp operating time: 647.4 h Total irradiator operation: 88.9 h Atlas CI3000+ Xenon Weather-Ometer including calibration case The Ci3000+ Weather-Ometer and Fade-Ometer, with their advanced digital control systems, represent a monumental achievement in the application of digital and optical technologies for user-friendly laboratory weathering equipment. The 3000 Series is approved by many OEMs in the textile, paint and coatings industries, as well as the plastics industry, as an exclusive platform for precise, reproducible, and repeatable results for lifetime prediction. The 3000 Series is certified to CE, UL, CSA, ISO, and EN standards. Guodpfx Abstq Em Eemjk Key features of this device include: - Rotating sample rack to maximize sample homogeneity - Custom nozzles for uniform specimen front and rear surface spraying - ASTM black panel thermometer or ISO/DIN black standard thermometer for control and monitoring of specimen-level temperature, ensuring test repeatability - 4500 W water-cooled xenon arc lamp - Total exposure area: 2188 cm² (339 in²) - 12-inch TFT full-color touchscreen control panel – displays all test parameters - Direct setting and control of black panel temperature (BPT, uninsulated) or black standard temperature (BST, insulated) - Direct setting and control of relative humidity - Direct setting and control of chamber air temperature - Diagnostic message display - 14 factory pre-programmed test methods (Weather-Ometer); 6 factory pre-programmed test methods (Fade-Ometer) Specifications: Type: Climate Test method: Sunlight simulation Light source: Xenon arc lamp Applications: - Additives and dyes - Adhesives and sealants - Architecture and construction - Automotive industry - Food and beverages - Graphics - Packaging - Paints and coatings - Photovoltaics - Plastics - Textiles - Wind and solar - Consumer electronics Voltage: 340-415V, 43A, 50/60Hz ~3/N/PE, 8kW 410 kg Condition: used Scope of delivery: (see image) (Subj. to changes and errors in technical specifications; all information is subject to confirmation!) If you have further questions, we will be happy to answer them by phone.

Sąlyga: geras (naudotas), Pneumatic double diaphragm pump - Rapid venting and immediate priming of the medium - Dry running without damage - Hermetically sealed for moisture-sensitive liquids - Excellent for abrasive fluids with low to medium viscosity and shear-sensitive materials - Max. air pressure: bar - Air connection: 1" inch - Water flow rate: l/min - Max. water pressure: bar - Connection: B coupling - Dimensions: 480/400/H530 mm - Weight: 32 kg Gujdpfx Abedwf S Ujmek

Sąlyga: naudotas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Gamintojas: Atlas Copco Pagaminimo metai: 2010 Tipas: ZT132VSD-FF Galia: 132 kW/50 Hz Maksimalus slėgis: 8,6 bar Oro tiekimas: 19,5 m³/min Darbo valandos: 71 979 val. Gjdpouh N S Iefx Abmouk Matmenys: 4040 mm (ilgis) x 1650 mm (plotis) x 2000 mm (aukštis) Grynoji masė: 3700 kg

Sąlyga: naudotas, kuro tipas: dyzelinas, kuras: dyzelinas, Gamybos metai: 2014, veikimo valandos: 3 500 h,

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, veikimo valandos: 64 734 h, Funkcionalumas: visiškai funkcionalus, Bealyvinis sraigtinis kompresorius Atlas Copco ZT55VSDFF. 55 kW, 8,35 baro slėgis, 8,55 m3/min. Gamybos metai 2016. Integruotas džiovintuvas ir keitiklis. Gusdoxwmzaepfx Abmsk

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, bendras svoris: 3 000 kg, bendras ilgis: 25 400 mm, bendras plotis: 1 600 mm, bendras aukštis: 2 000 mm, galia: 165 kW (224,34 AG), tūrio srautas: 1,56 m³/val, triukšmo lygis: 65 dB, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, Continuously maintained, excellent condition. Atlas Copco ZR160 VSD Screw Compressor With variable speed drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Model: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption: 2.1 liters/s Air intake: 27 m³/min Water-cooled Oil-free Power: 163 kW Year of manufacture: 2002 Operating hours: 122,499 Last service: 20 September 2002.3. Godpern S Hpofx Abmeuk Dryer: Manufacturer: Atlas Copco Model: MD 400 W Year of manufacture: 2002 Max. operating pressure: 10.5 bar Tank capacity: 199 l ​

Sąlyga: labai geros būklės (naudotas), Atlas Type: SC 350 MHG Atlas Solar Climate Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climate chamber with sunlight simulation using an MHG lamp). The unit is suitable for conducting standardized weathering and aging tests under combined exposure to radiation, temperature, and climate conditions. Features & Special Equipment: - Precise temperature and humidity control - Integrated humidification system with water tank - Cooling via water or air system (optional) - Feedthroughs for measurement lines provided - Control via operating panel or interfaces (RS232 etc.) - Durable test chamber floor, loadable up to 60 kg (optionally reinforced up to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Illumination unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Radiation source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering: Spectrum 300–3,000 nm, standard-compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at 1 m distance Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg For your safety as a buyer, please note the following information! The following measures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data and specifications reserved!) Gujdpfx Aboxbd Rajmek For further questions, please feel free to contact us by phone.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2017, mašinos/transporto priemonės numeris: API801175, Article number: MA1131 Manufacturer: Atlas Copco Model: AQ22VSD Year of manufacture: 2017 Machine No.: API801175 Length [mm]: 2000 Width [mm]: 1050 Height [mm]: 1500 Gusdpfsh Ed S Sjx Abmek Weight [kg]: 800 Connected load: 380 V / Operating hours [h]: As new, 76 operating hours Gearbox speed [rpm]: 6700 Features: The compressor is water-cooled and the air is absolutely oil-free. Operating manual included. Original price: €56,350, Special price: €27,500

Sąlyga: naudotas, Gamybos metai: 2002, veikimo valandos: 15 152 h, Įranga: visų varančiųjų ratų pavara,

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, veikimo valandos: 745 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 191 kg, galia: 5 kW (6,80 AG), kuro tipas: elektrinis, kuro bako talpa: 270 l, tūrio srautas: 42 m³/val, darbinis slėgis: 10 juosta, aušinimo tipas: oras, Įranga: Tipinė plokštelė prieinama, ATLAS COPCO LE7-10UV 2 cilindrų stūmoklinis kompresorius, parduodamas naujos būklės Gamintojas: ATLAS COPCO Tipas: LE7-10UV TM270 400/3/50 CE Metai: 2021 Darbo valandos: 750 val. Talpyklos tūris: 270 litrų Maksimalus slėgis: 10 bar Oro našumas: 11,7 l/s (litrai/sekundę) ≈ 24,8 cfm Svoris: 191 kg Galia: 5,15 kW (7 AG) Energijos tiekimas: 400 V / 3 fazės / 50 Hz Guodpfx Absw Nygbjmok Sukimosi greitis: 1500 aps./min.

Sąlyga: labai geros būklės (naudotas), Here we offer you a weathering test device. Heraeus Atlas Xenotest BETA – a universal weathering instrument for testing the lightfastness and weather resistance of materials under normal, high-temperature, and high-performance conditions. Features: - XENOSENSIV drive system - Lamp power control in W/m² - XENOCHROME 320, 35–100 W/m² - Sample chamber temperature regulated up to 80°C - Measurement sensors at sample level: XENOSENSIV E(300–400 nm) - Humidification / spray function - Water supply with integrated water tank - Sample chamber temperature: ambient to 80°C - Black standard temperature: surface up to 130°C - Relative humidity: 10–95% - Electrical configuration: 3/N/PE AC 400V±10% 50–60 Hz - Power connection: 32A - Power consumption: approx. 12 kVA - Nominal power of the xenon lamp: 2200VA - Xenon lamp power: 2800VA - Rated current: 16A - Maximum lamp current: 20A - Dimensions: width 900 mm x depth 1200 mm x height 1800 mm - Maximum specimen area: 4000 cm² - Weight: approx. 400 kg - Type: Heraeus Atlas Xenotest BETA LM Gujdpfx Aeg Dglyobmsk - Condition: used - Scope of delivery: (see image) (Subject to changes and errors in technical specifications; all information is provided without guarantee!) If you have further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer you a weathering test device: Atlas Xenotest Alpha LM – a universal weathering instrument for testing the lightfastness and weather resistance of materials under standard, high temperature, and high-performance conditions. - XENOCHROME Filter - XENOSENSIV Gear - Control of lamp output in W/m² - Sample chamber temperature regulated up to 70°C - Measurement sensors at sample level XENOSENSIV E(300–400 nm) and SST - Stationary sensor for sample chamber temperature and relative humidity - Humidification - Spray function - Water supply with integrated water tank - Electronic version: 230V, 50/60Hz Absorption Filter 7 IR: Constant operation 40 – 140 W/m², Stepped operation 21 – 72 W/m² Window Glass 10 FG: Constant operation 40 – 110 W/m², Stepped operation 21 – 57 W/m² Absorption Filter 4 IR + 3 Window Glass: Constant operation 40 – 140 W/m², Stepped operation 21 – 72 W/m² Absorption Filter 6 IR + 1 UV: Constant operation 40 – 140 W/m², Stepped operation 21 – 72 W/m² Relative electrical power without XENOSENSIV sensor: continuously regulated to set value 53 – 120 % Sample chamber temperature: 20 – 70°C (depending on filter configuration) Black standard temperature: Constant 25 – 130°C, Stepped 25 – 100°C Relative humidity: 10% – 95% Fan speed: 500 – 2500 rpm Guodpfxod Dtn Uj Abmek Dimensions: 900 x 780 x 1800 mm Model: Xenotest Alpha LM High Energy Condition: used Scope of delivery: (see picture) The device comes from ongoing operation. For further questions, we are happy to assist you by phone. Written orders are possible by email or fax.

Sąlyga: labai geros būklės (naudotas), Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer, with their advanced digital control systems, represent major achievements in the application of digital and optical technologies in user-friendly laboratory weathering test devices. The 3000 Series is approved by numerous OEMs in the textile, paint and coatings, as well as plastics industries as an exclusive platform for precise, reproducible, and repeatable results in lifetime prediction. Features: Type: Climate Test type: Sunlight simulation Light source: Xenon arc lamp Applications: Additives and dyes Adhesives and sealants Architecture and construction Automotive industry Food and beverage Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000’s humidification system operates with a compressed air ultrasonic spray nozzle. Prior to entering the unit, the compressed air must pass through a water/oil separator. The small air regulator in the CI3000 features a secondary water-oil filter and a 5-micron particulate filter. Ensure a separate oil-water separator is installed and do not rely solely on the air regulator filter, as it is designed only as a supplementary device. Compressed air specifications: Pressure: 80–100 PSI (552–689 kPa) Flow rate: 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the CI3000: 37.5" width x 29" depth x 72" height (95 cm width x 73 cm depth x 183 cm height) Gjdpfjucd Rbjx Abmjuk Required footprint: 41.5" width x 80" depth (105 cm width x 203 cm depth) Total weight: 404 kg Voltage: 380-220 V, 38 A, 50 Hz ~3/N/PE 8 kW 404 kg Condition: used Scope of supply: (See photo) (Specifications may change; errors excepted!) For further questions, please feel free to contact us by phone.