Alyvuogių Gręžimo pirkti naudotą (3 391)

Gamybos metai: 2009, būklė: naudotas, mašinos/transporto priemonės numeris: 0301-260004, Kaltenbach KBS 1010 DG - KDX-S 1015 BEAM DRILL-SAW LINE The Kaltenbach KBS 1010 DG - KDX-S 1015 drill-saw combination consists of a CNC-controlled Kaltenbach KBS 1010 DG band saw and a Kaltenbach KDX-S 1015 drilling unit. This drilling and sawing system is perfectly suited for cost-effective sawing, drilling, center marking, scribing, and thread cutting of beam and flat steel bars in steel fabrication and steel trading. The Kaltenbach KDX-S drilling unit comes equipped with three drilling spindles, each with a 26 kW drive motor and individual 5-position automatic tool changers. The Kaltenbach M150 length measuring system (measuring carriage), together with the T13 transport system, is designed for profiles up to 18 meters in length. The extensive material handling system for profile steel also features cross transfers on the infeed and outfeed sides for lateral profile transport. The CNC control unit, together with Kaltenbach Profiline III software, enables data processing in DSTV and DXF formats. The entire system features an ergonomic working height, with a material level to floor upper edge of 640 mm, providing the operator with excellent visibility. Removal and separation of cut-offs or onward transfer of the profile to the outfeed is handled by a gripper after the saw. The Kaltenbach KBS 1010 DG - KDX-S 1015 saw-drill combination consists of: Bljdpfx Asymy Imef Ajg PROFILE STEEL DRILLING LINE Kaltenbach KDX-S 1015 MITERING BAND SAW Kaltenbach KBS 1010 DG MACHINE CONTROL Kaltenbach Profiline III LENGTH MEASURING DEVICE Kaltenbach M 150 TRANSPORT SYSTEM Kaltenbach T13

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2001, veikimo valandos: 9 413 h, mašinos/transporto priemonės numeris: 101T2551-1, - Engine power: 179 kW at 2200 rpm - Engine type: Caterpillar 3126 DITA - 6 cylinders - Machine weight: 17.5 t - Width: 2.50 m - Height: 3.10 m - Length: 9.70 m Bledpfsv Nhyfsx Af Asg

Būklė: geras (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, Iš įmonės uždarymo: Panhans modelis 116 380 V Kaiščių gręžimo įrenginys 16-22-25-32 2x medžiagos spaustuvai Bodpfoy Iurwjx Af Aslg Kampinis atmušėjas Ilgio atmušėjas Pagaminimo metai: 1985 Galia: 1,5 kW

Būklė: naudotas, Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 17KX216770001, Caracteristici tehnice: Suprafața de lucru # Diametru maxim de rotație: 230 mm (cu încărcător 120 mm) Blodoxxi Ncopfx Af Aeg # Diametru maxim de prelucrare: 200 mm # Lungime maximă piesă: 145 mm (cu încărcător 75 mm) # Cursă axă X1/X2: 130 mm / Viteză de avans rapid X: 24 m/min # Cursă axă Z1/Z2: 145 mm / Viteză de avans rapid Z: 24 m/min # Cursă axă Y1/Y2: +/-40 mm / Viteză de avans rapid Z: 12 m/min Automatizare: # Cursă axelor: X - Stânga 200 mm / Dreapta 1600 mm; Y - 550 mm; Z - 155 mm; α 180˚ # Viteze maxime m/min: X - 160; Y - 120; Z - 35 mm; α 180˚/1sec # Specificații grippere încărcare/descărcare (acționate pneumatic): diametru exterior - Ø90 mm; deschidere falci 30 mm; forță de prindere: exterior 128 kgf / interior 138 kgf Ax principal # Dimensiune arbore principal: Standard (6 / 8 inch)/165 mm/205 mm # Turație maximă: Stânga & dreapta 45-4500 rpm # Putere la 100% ED: Stânga - 15 kW / Dreapta 7,5 kW Portscule cu scule motorizate # Interfață portscule: BMT55 # Număr poziții: 12 dreapta / 12 stânga - revolver disc, toate pozițiile acționate # Viteză maximă: max. 4000 rpm, putere motor frezare: 4,5 kW Echipament electric # Tensiune de alimentare: 200V trifazat, siguranță 151A # Putere instalată: 31 kVA Dimensiuni # Dimensiuni utilaj (L×l×h): 3950 × 2715 × 2800 mm # Greutate: 4400 kg Caracteristici principale și capabilități: # Construcție orizontală: evacuare optimă a așchiilor, încărcare/descărcare gantry din/spre benzi transportoare # Sisteme de automatizare: robot gantry + 2 benzi transportoare încărcare/descărcare # Comandă numerică CNC: Fanuc FS31i Seria Model A # Bandă transportoare pentru evacuarea așchiilor # Filtrare lichid de răcire max. 40 bari: Filtru micron, model Evotech 500PRO # Răcire lichid de răcire: Texa TCW55PMSBCDX00 sn165373 # Control în proces: Marposs T25 # Sistem pentru detectarea sculelor rupte: funcție Peek tool meniul Murata/Fanuc activată # Documentație: disponibilă electronic / carte Stare utilaj: ÎN FUNCȚIUNE

Būklė: geras (naudotas), mašinos/transporto priemonės numeris: M4137-1280, Funkcionalumas: visiškai funkcionalus, sukimosi greitis (maks.): 960 aps./min, Parduodama sriegių sriegimo staklės Snow TA-3-S. Įrenginys yra geros būklės. Yra du vienetai. Techniniai duomenys: Gamintojas: Snow Manufacturing Modelis: TA-3-S Serijos numeris: M4137-1280 Variklio galia: 0,55 kW Apsisukimų skaičius: 960 aps./min. Įtampa: 380 V Dažnis/fazės: 50 Hz / 3 fazės Valdymo įtampa: 110 V Pageidaujant galima organizuoti transportavimą ir pakrovimą už papildomą mokestį visoje Europoje. Kainos nurodytos be PVM. Apžiūrą galima suderinti iš anksto. Susisiekite su mumis, mūsų komanda mielai jums padės. Galimas keitimas arba dalinis apmokėjimas! Įrenginių pirkimas ir pardavimas GAMYBOS IR METALO APDIRBIMO TECHNIKOS PIRKIMAS/PARDAVIMAS IR KT. Ieškote aukštos kokybės, bet nebrangios metalo apdirbimo staklių gamybai? Arba norite savo įrangą parduoti? Bljdpoy Hihkefx Af Asg Daugiau informacijos ir kontaktiniai duomenys mūsų interneto svetainėje.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 55 kW (74,78 AG), kuro tipas: dyzelinas, darbinė masė: 14 300 kg, didžiausias leistinas svoris: 14 300 kg, emisijos klasė: Euro 5, Gamybos metai: 2023, veikimo valandos: 419 h, Gręžimo svirties tipas: BUT 29 L Bedpfxoy Enpwe Af Aslg Gręžimo laikiklio tipas / ilgis: HM 2X31R / 3090 mm Gręžimo plaktuko tipas: COP 1638HD + T38 07 Elektros pavara: 75 kW 400 V 50 Hz Dyzelinis variklis / tipas / galia / emisijos klasė: Deutz / TD 3.6 / 55 kW / V emisijos lygis Kompresorius / tipas / našumas: GAR30 / 62 l/s prie 10 bar Tepimo sistema: automatinė ir rankinė Aukšto slėgio plovimo įrenginys: gręžimo svirčiai ir laikikliui plauti Gaisro gesinimo sistema: ANSUL Papildomas lizdas: CEE 400 voltų, 32 amperai Eksploatacinė masė: 14 300 kg Kabelio ritė 400 voltų: laido ilgis 110 metrų Minimalus gręžimo skersmuo: 45 mm Matmenys: 11 040 x 1 750 x 2 828 mm (ilgis x plotis x aukštis), pakelta kabinos stogo padėtis Darbo valandos (elektros variklis): 1041 Darbo valandos (elektros variklis, gręžimo valandos): 512

Būklė: naudotas, Y ašis 1.000 mm Stalo matmenys 1.000 x 600 mm Gręžimo gylis 150 mm Gręžimo skersmuo 32 mm Blsdpfx Afoy A Tc Do Aeg Veleno sukimosi greitis 30–2.650 aps./min. Galia 6 kW Mūsų vertinimu, įrenginys yra geros naudotos būklės ir gali būti apžiūrėtas prijungus prie elektros pagal susitarimą. Priklausiniai, paveikslėliuose matomi įrankiai ir tvirtinimo detalės yra pristatymo dalis tik tuo atveju, jei tai nurodyta papildomoje informacijoje. Techninių duomenų ir informacijos pakeitimai bei klaidos, taip pat tarpinis pardavimas galimi!

Būklė: naudotas, Machines for Export from Liquidation Stock No. 62506 = Double Mitre Saw RAPID Type DGL 5000 / 500 = Approx. weight 1,200 kg = Special price: EUR 1,800 Stock No. 58052 = Eccentric Press MÜLLER GEFREES = Approx. weight 4,700 kg = Special price: EUR 2,400 Stock No. 59408 = Eccentric Press WEINGARTEN = Approx. weight 1,400 kg = Special price: EUR 1,000 Bsdpfxey Erzdj Af Ajlg Stock No. 58984 = Eccentric Press MÜLLER GEFREES = Approx. weight 1,400 kg = Special price: EUR 1,000 Stock No. 58309 = Eccentric Press MÜLLER GEFREES = Approx. weight 1,000 kg = Special price: EUR 1,000 Stock No. 60975 = Eccentric Press 16 ton (year 2017) = Approx. weight 800 kg = Special price: EUR 1,000 Stock No. 62267 (1) = Eccentric Press WEINGARTEN 75 ton (Machine 1) = Approx. weight 4,800 kg Stock No. 62267 (2) = Eccentric Press WEINGARTEN 75 ton (Machine 2) = Approx. weight 4,800 kg Stock No. 54183 = Hydraulic Press MÜLLER 10 ton, without hydraulic pump = Approx. weight 1,200 kg = Special price: EUR 1,000 Stock No. 57780 = Hydraulic Press MÜLLER Type HEP 40 = Approx. weight 2,200 kg = Special price: EUR 1,900 Hydraulic Press – with separate hydraulic unit = Approx. weight 3,000 kg Stock No. 60507 = WEBO Multi-Spindle Drilling Machine with 4 heads = Approx. weight 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL Multi-Spindle Drilling Machine with 2 heads = Approx. weight 1,700 kg = EUR 1,200 Stock No. 60699 = WEBO Column Drilling Machine MK5 = Weight 1,600 kg = Special price: EUR 1,600 Stock No. 60177 = WEBO Radial Drilling Machine Type R4bR = Approx. weight 2,800 kg = Special price: EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Approx. weight 4,000 kg = Special price: EUR 1,900 --- Many more machines immediately available for export. For example: 10 welding units by CLOOS, ESS, etc. 2x CNC Lathe HITACHI SEIKI

Būklė: naudotas, Gamybos metai: 1984, Dowel hole boring unit: Spacing 16, 22, 25, 32 mm Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Hold-down device: manual Dust extraction port: 100 mm Machine length: 1280 mm Blsdpfx Aox I Aikef Asg Machine width: 960 mm Weight: 300 kg

Būklė: labai geros būklės (naudotas), padavimo ilgis X ašis: 450 mm, padavimo eiga Y ašimi: 300 mm, padavimo ilgis Z ašis: 300 mm,

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, DRLTS 3000 x 2500 Stalo matmenys (I x P): 3.000 x 2.500 mm Bendrieji matmenys (I x P x A): 6.374 x 2.500 x 1.200 mm Bodpfx Aeyqwxdjf Ajlg Naudingoji apkrova: 60.000 kg Linijinės pavaros variklio greitis: 2.500 aps./min. Galia: 35 kW Pagaminimo metai: 2011 Svoris: 26.000 kg

Būklė: naudotas, Gamybos metai: 2014, Used machine Year of manufacture: 2014 Bledey Ih Skepfx Af Aog Features and technical data: Completely in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-off, gluing, and dowel driving station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 105 m/min - Z-axis adjustable manually via mechanical digital counter, position via support table 5-40 mm - Dowel insertion projection adjustable from 7-20 mm via mechanical digital counter, drilling depth from 0-35 mm (with drill length GL 70 mm) is automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - Selector switch GLUE/WATER for rinsing the glue system, each with: 1 stainless steel tank for 7.5 kg glue and 7.5 l water - Control lamp for glue residue indication in the glue tank - 1 pc. side stop left, 1 pc. side stop right, and 1 pc. center stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angular clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Ø 80 mm 1 pc. TCT control with: Built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" capacitive touchscreen, operating system: WINDOWS 7 - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and work sequence optimization, 4 working fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, error diagnostics in plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with NC-controlled dynamic positioning for height adjustment of the drilling and dowel driving station (programmable from 5-40 mm), travel speed max. 30 mm/sec 1 single-spindle vertical drilling unit, drilling from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm), workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation e.g. for Häfele Minifix) 4 vertical angular clamping cylinders 10° with mounting, additionally, 1 keyboard with mounting Availability: as agreed; currently being overhauled at Ganner factory Location: Austria

Būklė: naudotas, Ilginio griovelio gręžimo staklės SAMCO AS 16 - naudota - Judantis variklis, Kaiščio gręžimo įrenginys ----- Techniniai duomenys ----- Darbinio stalo matmenys: 550 x 285 mm, Gręžimo plotis: 190 mm, Gręžimo gylis: 120 mm, Apsisukimai: 2 840 aps./min., Variklis: 1,5 kW, Svoris: 220 kg Blodpfx Afew Nv Nxs Aog

Būklė: naudotas, Gamybos metai: 1994, Aukščio reguliavimas: per skaitmeninį ekraną Aukščio reguliavimas: 100 mm pneumatiniu būdu Gręžimo eiga / gylis: 150 mm rankiniu būdu Skersinis perstatymas: 320 mm išdėstymas Variklis: 1,5 kW Darbinis slėgis: 6 barų Stalo paviršius: 1100 x 240 mm Svoris: 255 kg Matmenys: 1100 x 1000 x 1400 mm Sandėliavimo vieta: Nattheim Bljdpfx Afey Hryps Asg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, gręžimo gylis: 1 250 mm, bendras ilgis: 8 100 mm, bendras plotis: 6 300 mm, bendras aukštis: 4 300 mm, ruošinio svoris (maks.): 7 000 kg, bendras svoris: 31 000 kg, X ašies eiga: 1 600 mm, Y ašies eiga: 1 250 mm, Z ašies eigos atstumas: 1 100 mm, veleno greitis (maks.): 6 000 aps./min, gręžimo skersmuo: 36 mm, 4-Seiten-Komplettbearbeitung Schwenkbare Bohr- und Fräseinheit DCM Dynamic Collision Monitoring CAM-Modell QCK (Quick Check Kinematics) Transferbohrzyklus (380-382) IKZ-Kühlsystem 90 bar Blsdpfsvn Sv Ujx Af Ajg Zusätzlicher ATC-Turm: 24 Positionen (4 x 6) HSK 63 Doppel- Kugelgewindetrieb-Konstruktion Klarwassertank 1650 l und Auffangtank 1300 l Späneförderer Max. Bohrdurchmesser Stahl: 36 mm Bohrtiefe: 1.250 mm Verfahrweg X: 1.600 mm Verfahrweg Y: 1.250 mm Verfahrweg Z: 1.100 mm Verfahrweg W: 1.600 mm Tischbelastung: 7.000 kg Tischgröße L x B / oder Ø: 1.500 x 1.100 mm Spindelaufnahme: HSK 63 Mk Spindelleistung: 23 kW Drehzahlbereiche: 6.000 U/min Länge: 8.100 mm Breite: 6.300 mm Höhe: 4.300 mm Gewicht: 31.000 kg

Būklė: naudotas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, veleno greitis (maks.): 2 500 aps./min, stalo ilgis: 10 000 mm, stalo plotis: 300 mm, stalo apkrova: 4 000 kg, bendras ilgis: 10 000 mm, sukimosi greitis (maks.): 2 500 aps./min, gręžimo pajėgumas: 40 mm, ašies variklio galia: 30 000 W, ruošinio svoris (maks.): 4 000 kg, We offer this used Voortman V600 precision drilling machine, year of manufacture 2022. VERY LOW HOURS – ONLY 1,838 OPERATING HOURS! Machine type: V600 Serial number: 20210153 Year of manufacture: 2022 Worktable: 10 m (effective 8.2 m) Max. workpiece weight: 4,000 kg 6 support beams Working range: Profile height: 30 – 1050 mm Bedpfx Ajyyblhjf Ajlg Max. working width: 1,800 mm Table width: 300 mm Drilling unit: Type: VD40 Power: 30 kW Spindle speed: 0 – 2,500 rpm Drilling diameter: 5 – 40 mm Thread cutting: M6 – M30 Equipment: 5-position automatic tool changer Automatic tool length measurement Laser material measurement system Hydraulic clamping system for vibration elimination Tool cooling system (oil + air) Control panel with 15” screen EtherCAT interface UPS (safe shutdown) Software: VACAM Machine Edition – machine control VACAM Office Edition – production preparation DSTV file import ERP / MRP / MIS integration Real-time production monitoring Email notifications Supported profiles: IPE, HE, IPN UNP angles flat bars square tubes T-sections American profiles (W) If you have any questions or need further information, please send us a message or contact us by phone.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Radialinė gręžimo mašina, Čekijos gamyba, su keliomis dėžėmis įvairių grąžtų ir detalių, tvirta ir labai sunki. Blodjxfda Aopfx Af Aeg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, įėjimo dažnis: 50 Hz, darbinis plotis: 1 200 mm, For sale: Throughfeed boring and dowel inserting machine LAZZONI Group – model Next 2+3K, designed for efficient serial production of furniture components. The machine is equipped with automatic feeding and return of workpieces, enabling single-operator operation and significantly reducing production costs. Key information: Manufacturer: Lazzoni Group Model: Next 2+3K Year of manufacture: 2018 Control: PLC + HMI operator panel Function: drilling + automatic dowel insertion Working length: 230-1200 mm Working height: 10-22 mm Working width: 40-260 mm Power supply: 400 V / 50 Hz Installed power: 9.1 kW Machine weight: approx. 2900 kg CE certificate Working configuration: - Number of heads: 5 - 2 side heads - 3 top heads - Total number of spindles: 35 - 7 spindles per head - Spindle pitch: 32 mm - Throughfeed operation – ideal for repeatable parts Bjdjywxy Rspfx Af Aolg Automation and ergonomics: - Infeed magazine for components - Outfeed magazine (no need for a second operator) - Automatic dowel insertion - Quick changeovers - Stable and repeatable operation for large batches Applications: - Drawer side production - Cabinet carcass components - Fronts, sides, rails - Ideal for both large factories and smaller companies focusing on automation The machine is fully operational, used in serial production, and available for inspection on site. Assistance with loading is possible. Location: Elbląg Net price: 25,000 PLN

Būklė: naudotas, Gamybos metai: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Travel of X axis mm 750 Max. traverse speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles Quantity 7 (4X-4Y, one shared) Horizontal spindles (Y axis) Quantity 2 (1+1) Horizontal spindles (X axis) Quantity 1 Fixed grooving saw (direction) X Saw blade diameter mm 100 Max. saw blade thickness mm 5 Motor output kW (HP) 1.5 (2) Spindle speed rpm 3350 Saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air velocity m/sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill shank D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1+1 drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor output 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drilling unit Workpiece positioning and aggregate drive A CNC-controlled vacuum suction system clamps and positions the workpiece sequentially under the working unit during machining. X and Y axis movement is on THK guides with transmission via reinforced toothed belts. Z axis movement is pneumatic on ball-bushing guides with positioning via adjustable stops. Positioning of working units is achieved with DC technology and drives. CNC CONTROL The control was specially developed for use in drilling and milling machines. CN - 7" color display with touchscreen functionality - Alphanumeric keyboard - Self-diagnosis and operator language-specific error or fault messages Programming - Programming via CN - automatic optimization of drilling operations - Option for panel zero-point shift - Storage and import of drilling programs via USB dongle - Import of drilling programs from external CAD/CAM software Configuration - User interface in same language as instruction manuals Graphical representation of unit configuration Vacuum suction system "B-Power" Vacuum suction cup with double vacuum connector, recommended for highly porous panels (e.g. light MDF). Machine operation interface Software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; multicore processor recommended - RAM: 1GB min., 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (The code includes a DVD for installation and a USB key) Xilog Maestro features Programming - parametric, graphical programming - Supported programming with graphics and syntax assistance for drilling operations - Ability to create and save machining macros Integrated additional functions - Self-diagnosis and operator-language error or fault messages - User interface in Bedpfsvvi I Rsx Af Aelg

Būklė: naudotas, Gamybos metai: 2002, Gręžimo galia 25 mm, griebtuvo tvirtinimas MK 3 Sandėliavimo vieta: Nattheim Blodpfx Asvvi Auef Aog

Būklė: geras (naudotas), X ašies eiga: 3 500 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 800 mm, stalo apkrova: 12 000 kg, bendras aukštis: 3 900 mm, bendras ilgis: 7 200 mm, bendras plotis: 5 200 mm, stalo ilgis: 1 800 mm, stalo plotis: 1 600 mm, X ašies padavimo greitis: 8 000 m/min, Y ašies padavimo greitis: 8 000 m/min, padavimo greitis Z ašis: 8 000 m/min, sukimosi greitis (maks.): 2 000 aps./min, Stalinis gręžimo-staklės TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Gamintojas: TOS VARNSDORF Tipas: WHN 13 CNC Bsdjy H Dahspfx Af Ajlg Valdymas: Heidenhain TNC415 X ašis: 3500 mm Y ašis: 2000 mm Z ašis: 800 mm W ašis: 1000 mm Stalo ilgis: 1800 mm Stalo plotis: 1600 mm Stalo apkrova: 12 t Gręžimo greitis: 2000 aps./min. Galia: 37 kW Įrankio laikiklis: ISO50 ISO/BT/MK X ašies pastūma: 8000 mm/min. Y ašies pastūma: 8000 mm/min. Z ašies pastūma: 8000 mm/min. W ašies pastūma: 8000 mm/min. Ilgis: 7200 mm Plotis: 5200 mm Aukštis: 3900 mm Svoris: 34 500 kg Pastaba: Informacija šiame puslapyje pateikta pagal mūsų geriausias žinias ir kiek įmanoma gauta iš gamintojo. Informacija pateikiama sąžiningai, tačiau tikslumas nėra garantuojamas. Atitinkamai, tai nėra teisiškai įpareigojanti informacija ar sutartinės sąlygos. Rekomenduojame patikrinti visus svarbius duomenis.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, X ašies eiga: 5 000 mm, Y ašies eiga: 3 500 mm, Z ašies eigos atstumas: 2 350 mm, X ašies padavimo greitis: 13 000 m/min, Y ašies padavimo greitis: 13 000 m/min, padavimo greitis Z ašis: 13 000 m/min, bendras ilgis: 12 000 mm, bendras aukštis: 4 800 mm, stalo plotis: 2 000 mm, bendras plotis: 6 800 mm, stalo ilgis: 2 500 mm, gręžimo pajėgumas: 180 mm, sukimosi greitis (min.): 2 000 aps./min, padavimo ilgis W ašis: 1 000 mm, Table-type Boring Mill Juaristi - TS5 MACH-ID 9610 Bljdpfxsy Hq Dyo Af Aog Manufacturer: Juaristi Model: TS5 Control: HeidenHain iTNC530 Year of manufacture: 2009 Coolant through the spindle: 20 bar Paper filter system Tool changer (ATC) with 60 positions Spindle extension: L = 550 mm Full B-axis 360.000° with ROD 880C Table load capacity: 28,000 kg X-axis travel: 5,000 mm Y-axis travel: 3,500 mm Z-axis travel: 2,350 mm W-axis travel: 1,000 mm Table length: 2,500 mm Table width: 2,000 mm Table load capacity: 28,000 kg Spindle speed: 2,000 rpm Motor power: 51 kW Tool holder: 180 ISO50 ISO/BT/MK Feed rate X-axis: 13,000 mm/min Feed rate Y-axis: 13,000 mm/min Feed rate Z-axis: 13,000 mm/min Feed rate W-axis: 13,000 mm/min Tool changer: 60 positions Internal coolant supply (IKZ): 20 bar Number of controlled axes: 5 Length: 12,000 mm Width: 6,800 mm Height: 4,800 mm Weight: 44,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, this does not constitute representation or contractual terms. We recommend verifying all critical details.

Būklė: geras (naudotas), Gamybos metai: 2004, Universal milling machine with HEIDENHAIN TNC 124 positioning control mechanical handwheels swivel tilting table ±45° hydraulic tool clamping Blodpfjigm Tcox Af Aog half-cab enclosure coolant tank manual Technical details: X travel: 600 mm y travel: 400 mm z travel: 400 mm Spindle speed: 63 – 3,150 rpm Infinitely variable feed: 12–3,000 / 6–1,500 (Z) mm/min Quill stroke: 100 mm Head swivel range: ±90° Spindle taper: ISO SK 40 Clamping surface: 630 x 400 mm Total power requirement: 8 kW Machine weight approx. 2.2 t Space requirement approx. 2 x 1.9 x 1.95 m

Būklė: naudotas, Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, veleno tvirtinimas: MK 3, gerklės gylis: 297 mm, bendras svoris: 680 kg, L.-Nr. 4.1-551 1 naudota staklių gręžimo mašina, gamintojas ALZMETALL, modelis AC 25, pagaminta 2002 m. aukščio reguliuojamas gręžimo galvutė, fiksuotas stalas, aušinimo įtaisas Techniniai duomenys: Gręžimo našumas plienui/ketausui: 25/30 mm Gręžimo veleno kūgis: MK 3 Bsdpfey Hik Sex Af Aolg Padavimas: 35-1400 aps./min. Gręžimo veleno eiga: 120 mm Atstumas nuo veleno iki kolonos: 297 mm Įrankio tvirtinimas: MK3 Svoris: 680 kg Techniniai duomenys, priedai ir aprašymas nėra įpareigojantys.

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Radialinis gręžtuvas, Csepel RFM 51, naudotas įrenginys Bledpfx Aowcqlcof Ajg Įrenginio išmontavimas yra pirkėjo atsakomybė. Gamintojas: Csepel Modelis: RFM 51 X ašies ilgis: 4000 mm Svirties eiga: 3100 mm Spindulys: 2460 mm Atstumas nuo pagrindo iki veleno: 1660 mm Gręžimo galia pliene: 100 mm Gręžimo galia ketaus: 120 mm