Giliai Skylė Gręžimo pirkti naudotą (6 025)

Būklė: beveik kaip naujas (naudotas), Giluminio gręžimo staklės yra 6 velenų ir labai geros būklės! Gręžimo velenų skaičius: 6 Gręžimo būdas: BTA Lhedeb Naclspfx Am Rel Gręžimo skersmuo: apie 16-22 mm Didžiausias gręžimo gylis: 1000 mm Taip pat dirbame kaip kompetentingi giluminio gręžimo, tekinimo, frezavimo ir suvirinimo paslaugų teikėjai. Mielai pateiksime Jums pasiūlymą! Šiuo metu siūlome specialią kainą!

Būklė: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, gręžimo gylis: 1 150 mm, bendras svoris: 12 000 kg, gręžimo skersmuo: 32 mm, Heidenhain iTNC530 CNC control 12-position tool changer Technical specifications: Travels: X-axis longitudinal (table): 1800 mm Z-axis transverse (column): 1700 mm W-axis transverse (drilling unit): 1150 mm Y-axis vertical (drilling unit): 1200 mm B-axis (rotary table): 360° A-axis (drilling unit): -25° to +15° Lhedpjwcldasfx Am Rol Deep drilling area (ELB): Diameter range: 6–32 mm Max. drilling depth: 1150 mm Drive power: 40 kW Approximate machine weight: 12,000 kg Technical data, accessories, and machine description are not binding. For further technical data, refer to the photos.

Būklė: beveik kaip naujas (naudotas), The machine has been completely overhauled and is therefore as good as new! Technical Specifications Drilling method: Single-lip drilling Number of spindles: 1 Drilling range in steel: D = 1–6 mm Drilling depth: 400 mm Max. workpiece length: 400 mm Manufacturer: TBT / SFT Lhjdpefgwlbefx Am Rjl New electrical system and new Siemens CNC control! We see ourselves as a competent partner in the field of deep hole drilling. We are also happy to receive enquiries regarding subcontract deep hole drilling operations.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 106882-11, bendras ilgis: 4 400 mm, bendras plotis: 1 700 mm, bendras aukštis: 2 700 mm, bendras svoris: 7 000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Specifications: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Nominal traverse of the slide: 650 mm - Slide width: 460 mm - X-axis stroke: 200 mm, rapid traverse: 25,000 mm/min - Y-axis stroke: 200 mm, rapid traverse: 25,000 mm/min Fluid System Information: - Coolant/lubricant supply: deep hole drilling oil - Tank capacity: 500 liters - 1 x automatic filter, filter capacity: 50 l/min - 1 x control filter - 2 x ELB deep hole drilling oil supply units - 1 x flow divider - 1 x air cooler with recirculation pump - 1 x electrostatic oil mist extractor - 1 x scraper belt chip conveyor - 1 x hydraulic and pneumatic power unit/equipment - 1 x sump pump - 3 x submersible pumps - 1 x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motor spindles with frequency-controlled, stepless speed adjustment - Spindle head with interface for tool holders - 2 x tool holders for collets according to VDI 3208 SE10x60, firmly bolted to the motor spindle’s spindle head Drill Bushing Carrier: - The drill bushing carrier is positionable via NC axis - Cast iron design mounted on linear guides - W-axis drive via AC servo motor and ball screw with an indirect, absolute measuring system Workpiece Slide: - The workpiece slide is designed as a cross slide for vertical and horizontal positioning of the workpiece, for mounting fixture plates or special clamping devices - Base body made from cast iron with linear roller guides - Drive for X and Y axes via AC servo motors and ball screws - Direct, absolute measuring systems - Table plate with T-slot or alignment slot Clamping Table with NC Indexing Unit for Positioning: - With rotary axis and tilting axis - Hydraulic clamping on rotary and tilting axes Technical data: - Tilting range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / tilting axis ± 30" Electrical Equipment Information: - 1 x drilling process monitoring - 1 x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400 V ±10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW Additional Machine Equipment: Lsdswh Rp Espfx Am Rehl - 2 x holders for spring-loaded bush holders, mounted on the drill bushing carrier - For max. drilling diameter Ø18 mm.

Būklė: nepatikrintas (naudotas), Gamybos metai: 1970, - Drilling diameter: 5–30 mm - Drilling depth: 750 mm - Filter - Pump Lodpfx Amsxzz Ho Rehl

Būklė: labai geros būklės (naudotas), Drilling capacity: 16 mm MT2 spindle taper Maximum drilling depth: 485 mm Table size: 590 x 350 mm, 360° rotatable Various accessories Lhsdpfx Amoq Dlzne Rel Marcels Maschinen AG

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, padavimo ilgis X ašis: 300 mm, padavimo eiga Y ašimi: 300 mm, padavimo ilgis Z ašis: 500 mm, MAIN MOVEMENTS Maximum drilling depth – Z-axis: 500 mm Longitudinal table movement – X-axis: 300 mm Vertical table movement – Y-axis: 300 mm Drilling slide, workpiece mount – W-axis: 50 mm DRILL SPINDLE Drilling diameter without pre-drilling, optimal: 3 – 12 mm Distance between drills: 250 mm Spindle speed, min - max: 0 - 6,000 rpm Drill spindle motor power: 7.5 kW (S1) Gun drill holder, for diameters less than 6 mm: Ø 10 x 40 mm Gun drill holder, for diameters greater than 6 mm: Ø 25 x 70 mm CLAMPING PLATE Fixed clamping plate, surface dimensions: 500 x 600 mm Maximum load capacity of fixed plate: 1,000 kg Standard T-slots for clamping devices: 18 mm OIL Cutting oil flow rate: 50 l/min Cutting oil pressure: 90 bar Hydraulic pump motor power: 7.5 kW Hydraulic tank capacity: 600 l Adjustable temperature: 27°-30°C DIMENSIONS AND WEIGHTS Width x Length: 4,450 x 3,000 mm Approximate weight: 2,210 kg POWER SUPPLY Power supply: 400 V/3-phase/50-60 Hz Compressed air: 6 bar Total installed power: 25 kW Lhjdpfx Amsu Au Due Rsl

Gamybos metai: 2018, būklė: beveik kaip naujas (parodų įrenginys), Number of spindles: 1 Solid drilling: 5–40 mm Lodsd S Ualspfx Am Rohl Drilling depth: 1,000 mm

Būklė: naujas, Gamybos metai: 2024, Techninės specifikacijos CNC – 1100 Valdymo sistema: Syntec 21MA-E Pavaros sistema: YASKAWA servopavaros Pagrindinis variklis: 7,5/11 kW Veleno apsisukimų skaičius: iki 7000 aps./min. Maksimalus gręžimo gylis: 1000 mm Gręžimo diametras: 3–30 mm X eiga: 1000 mm Y eiga: 800 mm Z eiga: 1000 mm Pjovimo pastūma: 0–300 mm/min Vidinės skylės tikslumas: 0,005 mm Skylės paviršiaus šiurkštumas: Ra 3,2 μm Veleno apsisukimų skaičius: 7000 aps./min. X ašies servovariklis: 2,3 kW Y ašies servovariklis: 3,0 kW Z ašies servovariklis: 2,3 kW Alyvos siurblio variklis: 5,5 kW Alyvos slėgis: 21 bar Filtravimo tikslumas: 20 μm Stalo keliamoji galia: 7000 kg Staklių svoris: 10 t Staklių galingumas: 34 kW Pjovimo alyvos talpa: 800 l Staklių matmenys: 4,8 x 3,8 x 2,6 m Kaina EXW (Sandėlis Europoje), įskaitant pakrovimą ant sunkvežimio. Lhjdpfxju Nyxws Am Rjl Transportavimas, montavimas, paleidimas, mokymai ir metinės priežiūros sutartys siūlomi papildomai už papildomą mokestį. Montavimą ir mokymus visuomet atlieka mūsų aukštos kvalifikacijos Serviso komanda 3 Europos vietose: Olandijoje, Vokietijoje ir Rumunijoje. Oficialus pardavėjas: CNC Top Ten bv Coevorden, Nyderlandai

Būklė: naudotas, Gamybos metai: 1993, Control: Sinumerik 805 Spindle speed: 45 – 6000 rpm Maximum boring diameter: 0 (full bore) Machine weight: approx. 20 t Machine type: Deep hole drilling machine Model / Type: TB 2 15 30001KT Year of manufacture: 1993 Manufacturer: Loch Machine number: 221-3000-2093 Machine weight: approx. 20,000 kg Machine footprint: Width: approx. 3,800 mm Length: approx. 13,500 mm Height: approx. 3,100 mm Drilling length: approx. 3,500 mm Drilling capacity: 45 mm drilling / 80 mm boring Spindle speed range: 45 – 6,000 rpm Control: Siemens Sinumerik 805 Hamül Coordinate Table Type: KT 8.5 – 10.10 Clamping surface: approx. 1,100 mm x 980 mm Travel distance Y-axis: approx. 800 mm Travel distance X-axis: approx. 500 mm 7x T-slots: 18 mm Ledpevvx Hiofx Am Rohl Special equipment: 1 pc. Fibroplan NC rotary indexing table Type: NC 1.05 Permissible load in horizontal use: 2,500 kg With Forkardt F 630 manual chuck The NC rotary indexing table is manually adjustable longitudinally and transversely relative to the clamping table and is hydraulically clamped. 1 pc. chip centrifuge Type: VZ5A by CEPA Drum volume: 80 liters Max. loading weight: 100 kg Drum diameter: 600 mm Speed: 1,000 rpm 1 pc. auxiliary pump for large drill diameters 1 pc. Bosch radial piston pump no. Suitable for lip drills (internal cooling, chips discharge outward) Suitable for BTA drills with screwed heads (internal cooling, chips discharge inward)

Būklė: naudotas, Gamybos metai: 2006, Full drilling diameter / mm Drilling depth / mm Number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces For sale is a specialized machine package – two perfectly coordinated systems for complete machining of long, heavy workpieces with the highest requirements for precision and efficiency. MACHINE 1 Froriep CNC Deep Hole Drilling Machine – The Pre-machining Specialist Lhjdpeuddimofx Am Rsl Year of manufacture: 2006 Control: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Chuck diameter: 900 mm Weight: approx. 47,000 kg Ideal for precision pre-drilling of deep holes – including faceplate, steady rest MACHINE 2 Irle Machine – High-Precision Finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed rate: 3 – 4,500 mm/min (stepped) Center distance: 11,000 mm Swing diameter over bed: 1,250 mm Steady rest clamping range: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tons Max. external diameter: 850 mm Perfect for fine boring, honing, and demanding finishing processes with up to 50,000 Nm torque. Your advantages at a glance - Complete solution from a single source – from pre-drilling to final machining - Large workpieces up to 11 meters and 10 tons - High process reliability due to perfect machine synchronization - Ready for immediate use, well-maintained, and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics, and large part manufacturing

Būklė: geras (naudotas), gręžimo gylis: 1 500 mm, padavimo ilgis X ašis: 2 000 mm, padavimo eiga Y ašimi: 1 300 mm, padavimo ilgis Z ašis: 1 500 mm, Manufacturer: TBT Tiefbohrtechnik Model: BW 250-S Control: SIEMENS 840D Lhedpfx Amev A Uw De Rel Year of manufacture: 2007 Drilling, milling, and tapping for heat exchanger tube sheets and plates Swiveling A-axis: +25 to -15 degrees Filtration and coolant system: 1000 L Chip conveyor: 2000 x 1200 mm, discharge height Milling tool changer tower station: 20 positions ELB drilling capacity: 3 - 35 mm Milling capacity: 250 cc/min Feed rates all axes (X-Y-W-Z): 15,000 mm/min Cutting hours: approx. 15,000 Comes with an extensive tooling package Specifications Metric | US Standard Max. drilling Ø in steel: 40 mm Drilling depth: 1,500 mm X-axis: 2,000 mm Y-axis: 1,300 mm Z-axis: 1,500 mm W-axis: 750 mm Table load capacity: 15,000 kg Table dimensions (L x W or Ø): 1,600 x 1,200 mm Spindle mount: HSK 63 Mk Spindle power: 11 kW Speed: 8,000 rpm Dimensions (approximate) Length: 7,200 mm Width: 7,800 mm Height: 4,250 mm Weight: 23,000 kg Please note: The information on this page has been provided to the best of our knowledge and wherever possible, sourced from the manufacturer. The information is given in good faith, however accuracy cannot be guaranteed. Accordingly, these details do not constitute representations or contract terms. We recommend verifying all critical details independently.

Būklė: naudotas, Gamybos metai: 2006, Pilnas gręžimo diametras / mm Gręžimo gylis / mm Velenų skaičius / Froriep CNC giluminio gręžimo staklės – Priešapdirbimo specialistė Pagaminimo metai: 2006 Valdymas: Siemens Sinumerik 840D Maks. gręžimo gylis: 8.850 mm Ruoinio skersmuo: 150 – 900 mm Lsdpfx Ajxgu R Ism Rjhl Sukimosi greičio diapazonas: 1 – 300 aps./min Pateikimas: 0,5 – 4.500 mm/min Variklio galia: 129 kW Apsisukimo skersmuo virš lovos: 1.000 mm Spaudimo plokštės diametras: 900 mm Svoris: apie 47.000 kg Idealiai tinka tiksliam gilių skylių priešgręžimui – su spaudimo plokšte ir luneta.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2019, TECHNINĖS DETALĖS Gręžimo gylis: 1.400 mm Pilno gręžimo diapazonas: 40 mm Veleno apsukų skaičius: 670 - 3.560 aps./min. Centro aukštis virš lovos: 380 mm Centro aukštis virš grindų: 1400 mm Stalo ilgis: 1.200 mm Stalo plotis: 1.200 mm Skersinio stalo poslinkis: 2x400 mm Centro aukštis virš stalo: 250 – 600 mm Z ašis Padavimo greitis: 0-7000 mm/min W ašis - 400 mm Padavimo greitis: 0-7000 mm/min Lhsdpfjw Ekfusx Am Rjl X ašis - 800 mm Padavimo greitis: 0-2000 mm/min Y ašis - 350 mm Padavimo greitis: 0-3000 mm/min Greito eigos greitis: 3,5 m/min Variklio vardinės apsukos: 8000 aps./min. Variklio vardinė galia: 18,5 kW STAKLIŲ DETALĖS Maitinimo įtampa: 380 V Dažnis: 50 Hz Prijungimo galia: 40 kW Bendras ilgis: 6.500 mm Bendras plotis: 3.500 mm Bendras aukštis: 2.900 mm Svoris: 8 t ĮRANGA Valdiklis: Siemens Sinumerik 840 Dsl Įskaitant aušinimo skysčio sistemą 1700 l 20 vnt. vienalūpių grąžtų nuo D=6 mm iki 20 mm / Ilgiai nuo 1200 iki 1750 mm

Būklė: naudotas, Gamybos metai: 2004, Full boring diameter: 200 mm Drilling depth / mm Number of spindles / Technical data Power: 129 kW Control system: Siemens NC control Speed range (stepless): 2 - 300 rpm Feed range (in steps): 3 - 4500 mm/min Oil system capacity: 20,000 liters Maximum flow rate: 1,500 l/min Swing diameter in steady rest: 1,100 mm Swing diameter over bed: 1,250 mm Center distance: 11,000 mm Ljdpfexgic Esx Am Rjhl Faceplate clamping diameter: up to 1,100 mm Max. workpiece weight with one fixed steady: 10 t Clamping range of the two steady rests: 150 - 1,100 mm BOZA clamping range: 1 = 200 - 400 mm 2 = 400 - 800 mm Dimensions Min. outside diameter: 406 mm Max. outside diameter: 850 mm Wall thickness: 10 to 150 mm Max. workpiece length: 11,000 mm Max. workpiece weight: 10 t Max. tensile strength: 800 N/mm² Specific cutting resistance (Ks): 2000 to 2100 N/mm² Machine data Machine length: 28,800 mm Center height: 560 mm Swing diameter over bed: 1,120 mm Full boring diameter: 200 mm Core drilling diameter: 350 mm Boring diameter without predrilling: 350 mm Boring diameter with predrilling: 350 mm Headstock: Main drive motor: Siemens Type: 1 PH 7228 Performance data at 1,000 min: 113 kW / 1,079 Nm Performance data at 1,150 min: 129 kW / 1,017 Nm Main gearbox: Z-F shifting gearbox Type: 2 K210 Switchable gear ratios: i = 1:1 i = 1:4 Fixed gearbox stage headstock: i = 11.68 Max. torque: 50,000 Nm Speed range I: 2...300 min Speed range II: 2 ...75 min

Gamybos metai: 2013, būklė: naudotas, valdiklių gamintojas: Siemens, valdiklio modelis: 840Dsl, Aprašymas: Bendrai: Gręžimo skersmuo (maks.): 3,5 mm Gręžimo gylis (maks.): 200 mm Giluminio gręžimo modulis: Technologija: Gręžimo velenas Sukimosi greitis (maks.): 10 000 aps./min Galia: 3,5 kW Įrankio tvirtinimas: HSK-A40 Ledpfx Aex E Ingsm Rjhl Įranga / priedai: Drožlių valdymas: Drožlių dėklas Aušinimo skysčio valdymas: Vidaus aušinimas aukštu slėgiu ir filtru, 140 bar Ruoinio tvirtinimas: Tvirtinimo griebtuvėlis, SMW Autoblok KSZ-MB-040-Z140 Alyvos rūko ištraukimas: Elektrostatinis separatorius, LTA AC 500 Kiti priedai: Įvairūs vienbriauniai grąžtai

Būklė: geras (naudotas), Gamybos metai: 1997, TBT ML 200-2-850 Deep Hole Drilling Machine TECHNICAL DATA Model: M200-2-850 Number of spindles: 2 Drill slide travel: 850 mm Drilling method: single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with steady rest: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Lhjdpfx Amevca Rco Rsl Feed – independent drive Feed rate: 20 – 500 mm/min Rapid traverse speed (NC mode): 12 m/min Feed force: 1.5 kN Motor torque: 2.2 Nm at 3000 rpm Tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Max travel: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and timeliness of the information provided.

Gamybos metai: 2006, būklė: naudotas, CNC SELCA 4045 Rotary Table: 1200 x 1500 mm X-Axis Travel: 2200 mm Y-Axis Travel (Vertical): 1000 mm V-Axis Travel (Drilling): 1000 mm Z-Axis Travel (Milling): 360 mm W-Axis Travel (Approach): 500 mm B-Axis Rotation (Table): 360,000° Maximum Drilling Capacity: 5–40 mm Maximum Tapping Capacity: M30 Tool Holder for Milling: ISO 40 Axis Feed Rate (X, Y, V, W): 0–10,000 mm/min Spindle Motor Power for Drilling and Milling: 9 kW Weight: 26,000 kg Drilling Spindle Speed: 4,200 rpm Milling Spindle Speed: 4,500 rpm Maximum Workpiece Weight (in rotation): 12,000 kg Maximum Workpiece Weight (stationary): 18,000 kg Lhsdoq Nni Sjpfx Am Rel Maximum Workpiece Diameter (in rotation): Ø 2,700 mm Automatic Tool Changer for Milling Tools: 20 positions Paper Filtration System

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, The deep hole drilling machine is in very good condition! Deep Hole Drilling Machine Type TBM 120-2000 Drilling System: BTA Drilling Range (solid drilling): 30–130 mm Max. Boring Diameter: 170 mm Max. Drilling Depth: 2,000 mm Max. Workpiece Length: 2,800 / 3,000 mm, depending on external dimensions. Drill Spindle Headstock with two-speed gearbox, electrically switchable. Selectable rotating or stationary tool. Main Spindle Headstock (Tailstock) with two-speed gearbox, electrically switchable. Tailstock with optional counter-rotation—can be used with or without counter-rotation. Hydraulic chuck. Main spindle assembly with two-stage gearbox. - Drive motor: Drive Ax AC motor, 37 kW, with brake for spindle locking, 1,200–1,500 rpm - Drilling spindle assembly with two-speed gearbox Ijbkneq A S Eko Auxqja Lodpfxehwhx Hs Am Rshl Continuously variable speed control for main and drilling spindle Machine bed in welded construction Linear roller guideways, size 65 - Drill slide movement via ball screw, gearbox, and 3 kW servomotor, rapid traverse max. 3,000 mm/min Feed rate max. 1,000 mm/min Hydraulically actuated drill bush carrier 2 x steady rests can be installed 2 x roller pre-centering units D20–100 mm 2 x Boza drilling range D8–200 mm With chip trough and extraction pump Scraper conveyor Fully enclosed cabin with sliding doors on the operator side 1-axis CNC control PS 100 SFT for monitoring and controlling the drilling cycle Torque monitoring for drilling spindle and feed with percentage display We also see ourselves as a competent partner for contract deep hole drilling. We would be happy to provide you with an offer! Feel free to contact us!

Būklė: geras (naudotas), - Drilling diameter: 5–30 mm Lhodpfx Aj Dcz Dsm Rel - Drilling depth: 750–900 mm - Conversion/customization according to customer requirements

Būklė: beveik kaip naujas (naudotas), Ryazan modelis PT295106 giluminio gręžimo staklės x 4000 mm Gamintojas: Ryazan Modelis: PT295106 Metai: 1985 Būklė: Naudota Atsargų numeris: 2850 Lhsdpfx Amsxzp Rlo Rjl Centro aukštis: 550 mm Pilnos gręžimo talpa: 200 mm Maks. gręžimo ilgis: 4000 mm Galvos gilzės skersmuo: 500 mm Galvos veleno apsukos: 16-250 aps./min Galvos pavara: 50/75 kW Maks. gręžimo ilgis priešais galvą: 3500 mm Maks. gręžimo ilgis naudojant 500 mm gilzės veleną: 4000 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, The deep hole drilling machine is in very good condition! Deep Hole Drilling Machine Model TBM 120-2000 Drilling system: BTA Drilling range (solid drilling): 30–130 mm Max. counterboring: 170 mm Max. drilling depth: 2,000 mm Lodpfx Aeq A S Eksm Rshl Max. workpiece length: 2,800 / 3,000 mm, depending on external dimensions. Drill spindle headstock with two-speed gearbox, electrically switchable. Selectable rotating or stationary tool. Main spindle headstock (tailstock) with two-speed gearbox, electrically switchable. Tailstock with counter-rotation, selectable with or without counter-rotation. Hydraulic chuck. Main spindle block with two-stage gearbox. - Drive motor: Drive Ax AC motor 37 kW with brake for spindle locking, 1,200–1,500 rpm. - Drill spindle block with two-speed gearbox. Infinitely variable speed control for main and drill spindles. Machine bed in welded construction. Guideways in linear roller design, size 65. - Drilling carriage movement via ballscrew, gearbox, and 3 kW servomotor; rapid traverse max. 3,000 mm/min. Feed rate max. 1,000 mm/min. Hydraulically positionable drill bush holder. 2 x steady rests available. 2 x roller centerings D20–100 mm. 2 x Boza drilling range D8–200 mm. With chip channel and extraction pump. Scraper conveyor. Fully enclosed guarding with sliding doors on the operator side. - 1-axis CNC control PS 100 SFT for controlling and monitoring the drilling cycle. Torque monitoring of drill spindle and feed, displayed as a percentage. We also consider ourselves your competent partner for deep hole drilling contract work. We are happy to provide you with an offer! Please feel free to contact us!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, gręžimo gylis: 1 500 mm, padavimo ilgis X ašis: 3 250 mm, padavimo eiga Y ašimi: 1 500 mm, veleno greitis (maks.): 4 200 aps./min, stalo apkrova: 35 000 kg, CNC SELCA 4040 DH Maximum drilling depth in a single cycle, V axis: 1,500 mm Column, longitudinal movement X axis: 3,250 mm Vertical movement Y axis: 1,500 mm Drilling slide, workpiece support movement W axis: 500 mm Maximum workpiece height: 2,400 mm Clamping table and workpiece approach movement U axis: 1,000 mm Controlled rotary resolution, B axis: 360,000 increments/rev Clamping table, rotary plate dimensions: 1,600 x 1,800 mm Clamping table, max load with ‘rotating workpiece’: 20,000 kg Standard T-slot width: 22 mm Min – max solid drilling diameter: 5 – 50 mm Rapid traverse (max adjustable speed): 8,000 mm/min Drilling spindle, rotation, adjustable speed: 1 – 4,200 rpm Spindle motor power: 15 kW Gun drill holder; shank for Ø 6mm drill: Ø 10 x 40 mm Gun drill holder; shank for 6mm/Ø 25mm drill: Ø 25 x 70 mm Gun drill holder; shank for drill Ø >25mm: Ø 40 x 70 mm Lhjdpfsyymdiex Am Rsl Dimensions & Weights Width x Length x Height MF 1500 BB: 5,900 x 7,600 x 3,850 mm Total weight: 42,000 kg Oil tank, capacity: 600 – 1,200 L WORK SLIDE SWIVELING Minimum/maximum vertical tilt – A axis: +20° / -20° Continuous controlled rotary resolution: 0.001° MILLING HEAD – ISO 50 spindle mount Maximum horizontal travel – Z + W axes: 1,000 mm Column, longitudinal movement – X axis: 3,250 mm Drilling slide, vertical movement – Y axis: 1,500 mm Spindle rotation, max adjustable speed: 2,500 rpm Spindle power, S1 duty: 17 kW Maximum spindle torque: 680 Nm ROTARY-TILTING CLAMPING TABLE Max clamping surface: 2,000 x 2,000 mm Max horizontal traverse, U axis: 1,000 mm Continuous rotary controlled resolution: 0.001° Max load capacity for rotating workpiece on axis: 35,000 kg Standard T-slot width: 22 mm Machine equipped with: • Remote electronic handwheel • ISO 50 tool changer, 10 positions • Many tools and workholding devices • Rack with various drills • User and maintenance manual, and CE declaration of conformity

Būklė: visiškai atnaujintas (naudotas), T30-1000 KTN/NC The machine is completely overhauled and is in as-new condition! The machine will be equipped with entirely new electrics and our proprietary control system. Lsdsfgwk Hjpfx Am Rohl Technical specifications Drilling method: ELB Number of drilling spindles: 1 We are your competent partner in the field of deep hole drilling. We are also happy to process contract deep hole drilling jobs upon request. Min. drilling diameter: 4 mm Max. drilling diameter: 30 mm Max. drilling depth: 600 mm for 4 mm diameter / for larger diameters, max. drilling depth 1000 mm Max. rapid traverse speed X+Z axis: 4000 mm/min Max. rapid traverse speed Y axis: 2000 mm/min Travel ranges X axis (horizontal): approx. 700 mm Y axis (vertical): approx. 300 mm Z axis (designed for max. drilling depth): 1000 mm Clamping table dimensions Approx. 850 x 750 mm, featuring longitudinal and transverse T-slots.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, gręžimo gylis: 1 000 mm, padavimo ilgis X ašis: 1 650 mm, padavimo eiga Y ašimi: 1 000 mm, Z ašies eigos atstumas: 360 mm, veleno greitis (maks.): 4 200 aps./min, gręžimo skersmuo: 40 mm, greitas poslinkis X ašimi: 10 m/min, greitas poslinkis Y ašis: 10 m/min, greitasis eiga Z ašyje: 10 m/min, ašies variklio galia: 10 000 W, stalo ilgis: 700 mm, stalo plotis: 1 400 mm, stalo apkrova: 4 000 kg, padavimo ilgis W ašis: 500 mm, Selca S4040D Numerical Control Ledpfx Amexpwf Tj Rehl Drilling depth, transverse movement V-axis: 1,000 mm Column, longitudinal movement X-axis: 1,650 mm Drilling slide, vertical movement Y-axis: 1,000 mm Drilling slide, workpiece support movement W-axis: 500 mm Drilling slide, vertical swiveling max – A-axis: +20° / -20° Rapid traverses, adjustable speed up to 10,000 mm/min Drilling diameter in solid material, min-max: 5 - 40 mm Drilling spindle, rotation, adjustable speed: 1 - 4,200 rpm Drilling spindle motor power: 10 kW Fixed clamping table, dimensions: 700 x 1,400 mm Standard T-slots for clamping: 18 mm Hydraulic pump motor power: 7.5 kW Gun drill holder; shank for drills > 6: 10 x 40 mm Gun drill holder; shank for drills < 6: 25 x 70 mm Clamping table (B-axis): ROTARY & "BARRASENO" Dimensions: 800 x 1,000 mm Standard T-slots for clamping: 18 mm Maximum axial load (rotary): 4,000 kg Continuous radial resolution B-axis: 360,000 div/rev Maximum vertical tilt "BARRASENO" – B1-axis: +20° / -20° Small milling – tapping head etc. Maximum horizontal working stroke Z-axis (830): 360 mm Spindle rotation, adjustable speed up to 2,200 rpm Tapping spindle motor power: 10 kW ISO40 tool changer with 10 rotating/translating stations USED MACHINE