Aliuminio Langas pirkti naudotą (965)

Gamybos metai: 2008, Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, 3 x 142 m³ Aluminum Silo (Plastic Granulate Silo) Technical Data / Dimensions Available units: 5 Year of manufacture: 2008 Volume: approx. 142,000 liters Tank type: Silo Condition: used Suitable for food: no Design: upright Internal diameter: approx. 3,500 mm Cylindrical height: approx. 14,900 mm Total height: approx. 17,500 mm Weight: approx. 3,500 kg Specific media weight: 0.63 t/m³ Operating pressure: non-pressurized Ground clearance: approx. 770 mm Material / Specifications Internal shell material: Aluminum Remarks: Material: AlMg3 / AlMgSi3 Base: Support ring / base skirt Top floor type: conical top Incline: approx. 15% Lodoxqr E Repfx Aa Toai Bottom type: cone Cone inclination: 60 degrees Silo Roof: 1 x roof edge railing, height: 1,200 mm 1 x transition walkway with railings 2 x crane eyes 1 x manhole DN 600 with vent 1 x connection flange for level measurement 1 x welded nozzle for full indicator 1 x flange DN 100 (filling) Shell: 1 x service door (approx. 1,800 x 850 mm) 1 x cable protection duct 1 x filling pipe DN 100, ending with TW connector Bottom section: The silos end below in a 60° cone with DN 200 flange and emergency shut-off slide, as well as a mounted extraction box.

Sąlyga: geras (naudotas), Suslėgto oro vamzdis / spaudiminė oro linija iš aliuminio Nurodyta kaina taikoma visiems suslėgto oro vamzdžiams kartu. Iš viso: apie 325 m vamzdžio Laodjvv Nvnepfx Aa Tsi Galimas dalinis pardavimas / atidavimas!

Sąlyga: naujas, Manual handheld device: No (Y/N) Automatic for single bar: Yes (Y/N) Automatic for frames: No (Y/N) Clip Setter "351" for loose individual parts ----- Manufacturer’s Description: - Base frame in robust welded construction - Clip container as tilting conveyor with singling and feeding of clips - Screwdriver with tilting conveyor for separating screws, pneumatic feeding screwdriver with depth adjustment Ljdpfjkx Stnjx Aa Toai - Conveyor belt approx. 4,000 mm long as NC axis - Alignment and clamping cylinders - Electro-pneumatic control via PLC Programs can be entered with different starting and spacing dimensions - Automatic workflow in continuous operation ----- Technical Data: - Screw height: 50–120 mm - Profile length: 350–3,500 mm - Table height: approx. 950 mm ----- Total machine price ex works: on request! Freight costs within Germany: Installation, commissioning, and briefing within Germany ----- Video shows version with extra infeed and outfeed conveyor with pusher. Not included in base price. Can be offered as an option if required. (Technical data as per manufacturer with no guarantee!)

Gamybos metai: 1993, Sąlyga: labai geros būklės (naudotas), Extraction system for aluminium, steel, and PVC chips Dimensions: 800x1000x2370 Laodpfx Aajd Rx H Eo Tsi

Sąlyga: naudotas, Assembly line with 4 workstations Roller conveyor made of aluminium system profile and INTERROLL metal rollers Highly versatile due to modular components and 400x700 mm assembly pallets Conveyor elements made of MiniTec aluminium system profile – comparable to BOSCH REXROTH Working height: 815 mm Total length: 13,250 mm 4 longitudinal roller conveyors: usable width 405 mm, length 2,500 mm, overall width 510 mm, each with 16 rollers 3 cross roller conveyors: usable width 705 mm, length 1,000 mm, overall width 810 mm, each with 10 rollers 1 cross roller conveyor: usable width 705 mm, length 2,500 mm, overall width 810 mm, with 30 rollers 4 two-way elements: usable dimensions 705 x 405 mm, total size 800 x 450 mm, each with 24 ball rollers - Total with 134 INTERROLL metal rollers, Ø 50 mm - Ball rollers made of plastic in the two-way elements Laedpet Rmfxefx Aa Tsi - ALU system profile MiniTec 45x45 mm, with 8 mm slot - Over 30 assembly pallets 400x700 mm made from multiplex panels, approx. 40 mm thick - Buffer station for multiple assembly pallets - Magazine feed line for unused assembly pallets on the rear side of the conveyor (length 13,200 mm) - Non-driven; assembly pallets are moved manually along the roller conveyors or pushed into buffer zones Weight: approx. 760 kg total, plus the assembly pallets Very good condition Further roller conveyors and conveyor rollers available in our shop.

Sąlyga: naudotas, ašių konfigūracija: 3 ašys, pirmoji registracija: 06/2007, spalva: kitas, Gamybos metai: 2007, Tuščias svoris: 8,075 kg Ašis 1: kairė 6 mm, dešinė 6 mm Ašis 2: kairė 10 mm, dešinė 10 mm Ledpfoxqztkex Aa Tsai Ašis 3: kairė 6 mm, dešinė 6 mm

Sąlyga: labai geros būklės (naudotas),

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Overhauled: 2024 Year of manufacture: 1994–2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed: 0 – 40 mm/s, continuously adjustable Cut length: 5–950 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After the retrofit, the machine is in a like-new condition, both technically and visually. Thanks to its equipment and construction, the machine can be used very efficiently for a wide range of applications. The programmed HMI control ensures simple and highly profitable operation of the system. The soundproof cabin minimizes noise emissions. The machine is fully overhauled in-house according to customer requirements. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul and/or replacement of all pneumatic cylinders - Renewal of valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine is equipped with: - Soundproof cabin - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: - Mass clamping system for parallel sawing of multiple workpieces - Flat magazine for automatic feed of up to 6 m long bar stock - Roller conveyors for bar stock - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your personnel Lasdpfx Aasuiy Hrj Tsi

Sąlyga: naujas, pjūklo disko skersmuo: 400 mm, aliuminio lakšto storis (maks.): 4 mm, bendras ilgis: 720 mm, bendras plotis: 760 mm, bendras aukštis: 1 330 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 120 mm, Apvalaus plieno pjovimo diapazonas ties 45°: 100 mm, sukimosi greitis (min.): 3 000 aps./min, sukimosi greitis (maks.): 3 000 aps./min, Gerd Wolff AC 400 yra automatinis aliuminio pjovimo staklės, specialiai gaminamos mūsų pardavimo ženklui „GERD WOLLF Maschinenfabrik“ Turkijos žinomo gamintojo. Standartinė komplektacija • Tvirtinimo taškai 15°, 22,5°, 30°, 45°, 67,5° kampams • Fiksavimo rankena tarpiniams kampams užfiksuoti • Reguliuojamas pjovimo greitis įvairiems profilių tipams • Pjūklo dangtis su saugos jungikliu • Pjūklas su diržo pavara • Dviejų rankų saugos valdymas • Lengvai keičiami pjūklo diskai • 2 x pneumatiniai vertikalūs cilindrai su spaustuvais • 1 x suspausto oro pistoletas Pasirenkama įranga • Hydrocheck – Hidraulinis aliuminio profilių greičio reguliavimas • Aliuminio pjovimo aušinimo sistema • Pagalbinis konvejeris su liniuotėmis Laodpfx Aasxb Ur Ue Tji

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 2010, ZUANI freza medžio-aliuminio langams Lodjxlk Nkjpfx Aa Teai Jei reikia frezų gamintojo numerių, prašome siųsti el. laišką!

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, veikimo valandos: 9 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 190551920245099737, pjūklo disko skersmuo: 500 mm, Parduodame pjovimo automatą Säge-Bohr-Gewinde Profilma 540 BG aliuminio profilių trumpinimui, gręžimui ir sriegimui. Tai speciali mašina, įsigyta saulės modulių komponentų gamybai. Komplektą sudaro: - Volelių transporteris RD500, ilgis 6000 mm - MG9 drožlių nusiurbimo paruošimas - Duomenų bazė pjovimo duomenims pagal profilio numerį saugoti - 32 vnt. kombinuotų mašininių sriegiklių M8x1,25 - 2 vnt. kietlydinio pjūklų diskų 500x3 Lodpfx Aexmhhgoa Tjai Mašina turi tik 9 darbo valandas.

Sąlyga: naudotas, ašių konfigūracija: 3 ašys, pirmoji registracija: 03/2011, spalva: kitas, Gamybos metai: 2011, Svoris be krovinio: 7,865 kg Ašis 1: kairė 8 mm, dešinė 8 mm Lasdpfx Aaoxqxq Hs Tsi Ašis 2: kairė 10 mm, dešinė 10 mm Ašis 3: kairė 8 mm, dešinė 8 mm

Sąlyga: naudotas, Aluminum silo with long base ring Technical data / Dimensions Available units: 1 Volume: approx. 105,000 liters Tank type: Silo Condition: used Food-grade: no Design: vertical Internal diameter: approx. 3,000 mm Cylindrical height: approx. 17,525 mm Total height: approx. 18,020 mm Weight: approx. 2,500 kg Specific gravity of medium: 0.6 t/m³ Operating pressure: non-pressurized Material / Characteristics Inner shell material: Aluminum Equipment Support type: Base ring / Support ring Mounting: fixed Top head type: Conical roof Inclination: approx. 15 degrees Bottom head type: Cone Cone angle: 60 degrees Top head features: - 2 x crane lugs - 1 x manhole DN 500 with cover - 1 x roof edge guardrail - 1 x flange DN 100 (silo pilot) - 1 x rectangular flange (approx. 1,215 x 835 mm) for filter Shell: - 2 x flange DN 32 (min-max sensors) - 1 x fill line, runs from top into the silo, ends in coupling at bottom - 1 x access door with ventilation slots (approx. 850 x 2,500 mm) - 1 x cable protection conduit Notes: - The silo ends at the bottom with a 60° cone with flange and extraction box. - The silo displays cosmetic imperfections (brown discoloration, various drilled holes for cable ducts in the base ring), which do not impair the silo's functionality. The currently installed instrumentation and control equipment is included. However, no warranty is given for its functionality! Laodpjtxitcjfx Aa Tji

Sąlyga: reikia remonto (naudotas), Gamybos metai: 2024, Completely overhauled: 2024 PLC control: Siemens S7 Saw blade diameter: 60 – 250 mm Motor power: 1.5 kW Saw blade feed: 0-20 mm/min Cutting speed: 15 - 170 m/min (steel) 630 – 1885 m/min (non-ferrous metals) Max. working area: 70x40 mm (steel) Max. working area: 60x40 mm (non-ferrous metals) Round material working range: 5 - 70 mm (steel) Round material working range: 5 - 50 mm (non-ferrous metals) Feed length: 5 - 500 mm 5-9999 mm (multiple stroke) Max. feed rate: 500 mm/sec Weight (saw) approx.: 610 kg Dimensions LxWxH (saw) approx.: 2500 mm x 1000 mm x 2000 mm The machine will be completely overhauled in our facility according to customer requirements. Among others, the following components will be renewed: - Conversion to Siemens S7 PLC control - Upgrade to Siemens HMI operator panel - Replacement of pneumatic feed and ball screw - Replacement of servomotor and servo drive - Replacement of frequency converter for main saw drive - New electronic components - New pneumatic lines - Servicing/replacement of all pneumatic cylinders and valve terminals - Optimization of extraction system - Servicing of central and minimal lubrication systems - Replacement of general wear parts - Overhaul of machine bed The machine is additionally equipped with: - Minimal lubrication for superior cutting quality Thanks to its features and design, the machine is suitable for high-volume cutting of steel within close tolerances. Warranty: Unless otherwise agreed, we offer a 6-month warranty on all parts overhauled or replaced by us. Labor and wear parts are excluded from the warranty. Laedpfxsuiy I Aj Aa Tji Options: - Conversion of the sawing unit to a direct-drive main drive for processing non-ferrous metals and plastics (speed: 1000 – 3000 rpm) - 1000 mm feed unit - 2000 mm feed unit - 4 m inclined magazine - 6 m inclined magazine - Servo-controlled material feed - Servo-controlled saw feed - Conversion to prism jaws (60°) for high-volume clamping of round materials - Discharge system - Delivery and installation at your facility - Training for your staff

Sąlyga: naujas, pjūklo disko skersmuo: 550 mm, aliuminio lakšto storis (maks.): 4 mm, bendras ilgis: 1 130 mm, bendras plotis: 980 mm, bendras aukštis: 1 430 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 155 mm, Apvalaus plieno pjovimo diapazonas ties 45°: 130 mm, sukimosi greitis (min.): 3 580 aps./min, sukimosi greitis (maks.): 3 580 aps./min, The Gerd Wolff AC 550 is an automatic aluminium cutting machine manufactured for our distribution brand "GERD WOLLF Maschinenfabrik" by a renowned producer in Turkey. CUTTING CAPACITY: Lasdpfx Aaoxb Urne Toi Cutting range at 90° round: 155 mm Cutting range at 90° square: 155 x 155 mm Cutting range at 90° rectangular: 260 x 200 mm Cutting range at 45° round: 130 mm Cutting range at 45° square: 130 x 130 mm Cutting range at 45° rectangular: 180 x 200 mm Standard Equipment: - Locating points for 15° – 22.5° – 30° – 45° – 67.5° - Clamping handle for locking at intermediate angles - Adjustable cutting speed for different profile types - Saw guard with safety switch - Belt-driven saw - Two-hand safety operation - Easy-change saw blade - 2 x pneumatic vertical cylinders with clamps - 1 x air blow gun Optional Equipment: - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with measuring rulers

Sąlyga: naudotas, Gamybos metai: 2007, Technical data: Laedpfxsrwlwvo Aa Tsi Speed: 2800 rpm Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (W x D x H), approx.: 1760 x 800 x 1680 mm

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, veikimo valandos: 190 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 190551920245099676, pjūklo disko skersmuo: 500 mm, Parduodame automatizuotą pjovimo ir štampavimo sprendimą Profilma 502ST-V, skirtą aliuminio profilių ilgio pjovimui ir štampavimui. Tai yra speciali mašina, įsigyta saulės modulių vidurinių laikiklių gamybai. Ljdpexmhf Eofx Aa Toai

Sąlyga: naudotas, ašių konfigūracija: 3 ašys, pirmoji registracija: 01/2012, spalva: kitas, Gamybos metai: 2012, Tuščias svoris: 7 190 kg Ašis 1: kairė 12 mm, dešinė 12 mm Ašis 2: kairė 12 mm, dešinė 12 mm Laedexqnz Uepfx Aa Tsi Ašis 3: kairė 10 mm, dešinė 10 mm

Sąlyga: labai geros būklės (naudotas),

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Year of overhaul: 2024 Max. saw blade size (carbide-tipped): 500/550 mm Saw motor drive power: 6 kW Saw motor speed, 6 steps: 2400–3200 rpm Saw blade cutting speed (500–550 mm): 3,800–5,500 m/min Saw blade feed, infinitely variable: 0–40 mm/s Saw height adjustment, infinitely adjustable, fully electronic Working range, square at 90° max.: 160 x 160 mm Working range, flat at 90° max.: 380 x 60 mm Working range, round at 90° max.: 165 mm Feed length: 10–9999 mm Feed speed (AC servo) max.: 400 mm/s Compressed air connection (on site): 6 bar Weight (saw) approx.: 2,850 kg Dimensions LxWxH (saw) approx.: 2,900 mm x 1,725 mm x 2,200 mm Footprint LxW: 2,900 mm x 1,725 mm The machine, following completed retrofit, is in as-new technical and visual condition. Thanks to its configuration and design, the machine can be used efficiently across a wide range of applications. The positioning system ensures simple and highly cost-effective operation. Due to the powerful motor, short cycle times can be achieved even when cutting thick-walled profiles or solid materials. The sound enclosure reduces the resulting noise emissions to a minimum. The machine is thoroughly overhauled in our facility according to customer requirements. The following components, among others, have been renewed: - Conversion to Siemens S7 PLC control Ljdpfsuiy Rqsx Aa Toai - Conversion to Siemens HMI operating panel - Replacement of ball screw - Replacement of servo motor and servo drive - Replacement of the frequency inverter for the main saw drive (optional) - New electrical components - New pneumatic lines - Maintenance or replacement of all hydraulic cylinders and valve islands - Overhauled extraction system - Overhauled minimum quantity lubrication system - Replacement of general wear parts - Overhaul of sound enclosure The machine is also equipped with: - Sound enclosure - Mechanical zero point adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts for our systems. Labor and wear parts are excluded from the warranty. Options: - Chain magazine for 4/6m materials - Splitter extension (for high-quality cutting surfaces without return marks) - Horizontal clamping of the saw line - Front cut stop in the material feed unit - Reinforced motor 11 kW - Roller conveyors - Delivery and installation at your facility - Training for your employees

Sąlyga: naudotas, Gamybos metai: 2007, 5-axis CNC gantry-type vertical machining center for milling, drilling, tapping, and cutting operations on 5 sides of aluminum profiles and light alloys. Technical description: - 5-axis electrospindle – A=±125°, 12 kW, with cooling unit - Automatic tool changer with 18 positions + Ø400 mm saw blade, safeguarded and mounted on a sliding gantry along the X axis - Working area – travel: X = 7500 mm; Y = 1500 mm; Z = 620 mm - Milling operations with linear and circular interpolation on X-Y-Z axes - 5-face machining capability - Possibility of PENDULUM operation mode - No. 8 pneumatically actuated clamps with automatic positioning - No. 2 pneumatic reference stops - Tool cooling system with control unit and minimal lubrication system Ljdpovgl Rcsfx Aa Teai - Motorized chip and scrap conveyor belt - CNC, user and maintenance manuals, CE certification included

Sąlyga: labai geros būklės (naudotas),

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Max. carbide saw blade: 500 mm Saw motor drive power: 4 kW Saw motor speed: 2,800 rpm Saw blade cutting speed (500 mm): 4,400 m/min Saw height adjustment: infinitely variable, fully electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 150 mm Feed length, pneumatic: 5–560, 10–1,120 mm Compressed air connection, on-site: 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2,900 mm x 1,400 mm x 1,500 mm Required installation space LxW: 2,900 mm x 1,400 mm Additional Description Elumatec SA/ SAS 142 4 kW Retrofit Elumatec SA 142 4 kW Retrofit Fully automatic saw for non-ferrous metals and plastics The machine is in like-new technical and optical condition after completion of the retrofit. The machine is fully refurbished at our facility according to customer requirements. The following points have been renewed, among others: - Conversion to Siemens S7 PLC control system - Conversion to Siemens HMI operator panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve manifolds - Maintenance of minimum quantity lubrication system - Replacement of common wear parts - Overhaul of the enclosure Ledsuiy Nyjpfx Aa Toai Warranty: Unless otherwise agreed, we offer a 6-month warranty on all parts overhauled or replaced by us. Labor and wear parts are excluded from the warranty. Options: - Extension of the sawing range for flat material, 90° max.: 300 x 120 mm - Chip breaker extension (for high-quality cut surfaces without drag marks) - Servo-controlled material feed - Servo-controlled saw blade feed - Heavy-duty clamping device for the gripper feed - Delivery and installation at your facility - Training of your personnel

Gamybos metai: 2007, Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, 3 x 148 m³ aluminium silo (plastic granulate silo) Technical data / dimensions Available quantity: 5 Year of manufacture: 2007 Volume: approx. 148,000 litres Type of vessel: Silo Condition: used Food-grade: no Design: vertical Internal diameter: approx. 3,500 mm Cylindrical height: approx. 14,900 mm Overall height: approx. 17,500 mm Weight: approx. 3,500 kg Specific weight of medium: 0.6 t/m³ Operating pressure: non-pressurized Ground clearance: approx. 770 mm Material / specification Inner shell material: Aluminium Notes: Material: AlMg3 / AlMgSi3 Laodpsxqr Ekjfx Aa Tei Support design: base ring/stand skirt Top head type: conical head Slope: approx. 15 % Bottom type: cone Cone angle: 90 degrees Top section: 1 x roof edge guardrail, height: 1,200 mm 1 x crossover walkway with railing 2 x lifting lugs 1 x manhole DN 600 with vent stub 1 x connection flange for level measurement 1 x welded nozzle for full indicator 1 x flange DN 100 (filling) Shell: 1 x access door (approx. 1,800 x 850 mm) 1 x cable protection tube 1 x filling line DN 100 ending with TW connection 1 x welded adapter for empty indicator Bottom section: The silos end at the bottom in a 90° cone with DN 200 flange and emergency shut-off slide, as well as a mounted suction box.

Sąlyga: naudotas, 3 x 93 m³ Aluminium Silo (Plastic Granulate Silo) Technical Data / Dimensions Available units: 3 Volume: approx. 92,000 litres Type: Silo Condition: Used Suitable for food: No Design: Vertical Internal diameter: approx. 3,500 mm Cylindrical height: approx. 9,000 mm Total height: approx. 11,600 mm Weight: approx. 2,050 kg Specific weight of medium: 0.6 t/m³ Operating pressure: Non-pressurised Ground clearance: approx. 770 mm Material / Specifications Inner shell material: Aluminium Notes: Material grade: AlMg3 / AlMgSi3 Base Construction: Base ring/stand frame Top base: Conical top Slope: approx. 15% Bottom: Cone Cone angle: 90 degrees Top Section: 1 x Roof perimeter railing, height: 1,200 mm 1 x Crossover platform with parapet 2 x Lifting eyes 1 x Filter flange DN 800 with blank cover and installed vent nozzle 1 x Connection flange for level measurement 1 x Welded socket for full-level detector Ledpfoxqr Dtex Aa Tsai Shell: 1 x Service door (approx. 1,800 x 850 mm) 1 x Cable protection pipe (ø 60 x 3 mm) 1 x Fill line DN 80 terminating in TW connection 1 x Welded socket for empty-level detector Bottom Section: The silo terminates below in a 90° cone with flange DN 200 and emergency shut-off slide valve. Optional: Two-piece access ladder with back protection available.