Aliuminio Dėklas pirkti naudotą (1 088)

Sąlyga: naudotas, Gamybos metai: 2004, Dear Sir or Madam, We hereby offer you a used aluminium cold circular saw "BERG UND SCHMID" in good condition. Model: "Multi Cut 500HA PENTA" - Digital miter angle display - Saw feed infinitely variable - Two pneumatic vertical clamps - Ball-bearing rotary table for miter and longitudinal cuts - Micro-spray lubricating system Year of manufacture: 2004 Serial number: 091 Fjdpfxewhmy Ho Acusgh Technical specifications: - HM saw blade Ø 500 x 4.2/3.6 x 30 mm - Cutting capacity [mm]: 90° 45° left 45° right Round: 160 140 140 Square: 140 120 120 Rectangle: 100x200 100x150 100x150 - Speed: 2800 rpm - Feed rate: steplessly adjustable - Dimensions (W x D x H): 85 x 105 x 145 cm - Weight: 350 kg Accessories: - Discharge length stop with roller conveyor - Model ST 260, roller width 260 mm, plastic rollers, 4.0 m

Gamybos metai: 1993, Sąlyga: labai geros būklės (naudotas), Extraction system for aluminium, steel, and PVC chips Fodpfx Acsd Rx H Esuegh Dimensions: 800x1000x2370

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, High-Performance Automatic Saw / Manufacturer: PRESSTA-EISELE Model: Profilma 510 / Year of manufacture: 09/2008 Description: Fjdpfx Acjw D T Uisuegh * High-performance automatic saw with fully automatic operation * Very high cutting precision * Short cycle times * Burr-free cutting * High reliability * Low maintenance Suitable for aluminum and plastic, ideal for cutting large quantities of small parts. Length tolerance: 0.1 mm. The saw can be viewed and tested under power by appointment. Previous use: Used for cutting corner connectors. Very well-maintained, used machine in ready-to-operate condition. Technical specifications: - Saw motor: 7.5 kW, S6 - Speed: 2,000 - 3,500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1,000 mm / up to 5x reversal possible - Cut-off length: from 8 mm, depending on profile - Remnant length: from 90 mm, depending on cut-off length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1,750 kg - Dimensions (LxWxH): 2,700 x 1,400 x 2,300 mm Equipment: - Control via Siemens S7 panel - Fully automatic bar feeder - Roller conveyors - Extraction system - Chip bunker - Various accessories - CE marking No guarantee for the completeness or accuracy of technical data or equipment. Subject to prior sale.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, pjovimo aukštis (maks.): 100 mm, pjovimo ilgis (maks.): 4 230 mm, galia: 21 kW (28,55 AG), pjovimo plotis (maks.): 4 100 mm, pagrindinis pjūklo diskas skersmuo: 450 mm, Machine type: FLM 430-410 / WinCommander 4 / non-ferrous metals Cutting length: 4,230 mm Cutting width: 4,100 mm Year of manufacture: 1997 Max. saw blade projection: 130 mm Max. saw blade diameter: 450 mm Main saw motor: 21 kW Max. stack height: 100 mm Saw feed, forward: 0.2 up to 50 m/min Saw feed, reverse: up to 50 m/min Feed rate: up to 32 m/min (Europe: forward 25 m/min according to EN 1870-13) Number of clamps: 9 grip push clamps Clamp opening: 130 mm Strip aligners before and after the pressure beam Air cushion tables: 3 units (1,800 x 600 mm) Roller table: Strip aligner in roller table Angle stop on roller table Machine table: Heavy-duty steel construction Precision-ground steel table surface Fgjdpforwmylsx Acush Brass table lips Automatic cutting length control This machine is in very good condition and fully operational. It is serviced, inspected, and tested in-house. Errors and changes to the technical data and information excepted! (Shown photos are sample images)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2018, Air flow rate: 12,500 Bm³/h, total pressure differential: 40 mbar, motor power: 22 kW, speed: 3,000 rpm, machine weight: 1,275 kg. Components: dust extraction, water vacuum filter, separator. Includes pH dosing system. Documentation available. On-site inspection possible. Expected to be available from April 2025. Fedpevzbg Nsfx Acuegh

Sąlyga: naujas, Gamybos metai: 2023, SPECIAL PRICE, stock machine year 2023, condition: new List price + option minimal lubrication system LUBETOOL: €15,370 Fgedpsvurgyofx Acujh STOCK MACHINE – Fully automatic aluminium circular saw 90° cut With simple, safe operation and excellent cutting performance. This machine allows for 90° cuts only! Technical specifications: ● Cutting capacity: 90° round: 100 mm / square: 100 x 100 mm / rectangular: 170 x 60 mm ● Drive power: 1.9 kW / 400 V / 50 Hz ● Speed: 3,000 rpm ● Feed: single-stroke feed 300 mm (double-stroke up to 600 mm) ● Max. cutting height: 100 mm ● Blade size: 350 x 32 mm Standard equipment: ● Machine for 90° cuts with a powerful drive motor ● Clearly arranged, large control panel ● Adjustment of cut length from 5 to 300 mm via handwheel and counter ● Main vice with 3 pneumatic clamping cylinders: 1 horizontal & 2 vertical ● Feed vice with horizontal and vertical pneumatic clamping cylinder ● Large safety hood covering the entire working area, pneumatically lifted ● Adjustable cutting and feed speed ● Air gun for cleaning the machine ● Ports for extraction system Optional, mounted on the stock machine: ● Minimal lubrication system "LUBETOOL" with one pump and pressure regulation

Sąlyga: naudotas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 563769, pjūklo disko skersmuo: 350 mm, bendras ilgis: 2 360 mm, bendras plotis: 1 700 mm, bendras aukštis: 1 750 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 120 mm, Apvalaus plieno pjovimo diapazonas ties 45°: 110 mm, sukimosi greitis (min.): 1 700 aps./min, sukimosi greitis (maks.): 3 400 aps./min, pjovimo aukštis (maks.): 120 mm, pjovimo ilgis (maks.): 180 mm, bendras svoris: 600 kg, darbinio aukščio: 950 mm, pjūklo disko greitis: 3 400 aps./min, įėjimo įtampa: 400 V, Kvadratinio plieno pjovimo diapazonas 45° kampu: 105 mm, Kvadratinio plieno pjovimo diapazonas prie 90°: 105 mm, pasukimo diapazonas: 45 °, suslėgto oro jungtis: 6 juosta, Įranga: dokumentacija / vadovas, Saw blade diameter: 350 mm Cutting range at 90 degrees – round: 120 mm Cutting range at 90 degrees – square: 105 mm Cutting range at 90 degrees – flat: 180 x 70 mm Cutting range at 45 degrees – round: 120/110 mm Cutting range at 45 degrees – square: 100/95 mm Cutting range at 45 degrees – flat: 135 x 60 mm Speed: 1,700 / 3,400 rpm Fjdpowl Hr Rjfx Acujgh Including roller conveyor For sale is a used COBRA 352 NC 5.0 fully automatic circular saw with semi-automatic function, suitable for cutting aluminium and light metal alloys. The machine is designed for use with carbide-tipped circular saw blades (HM). This machine enables mitre cuts from 45° right to 45° left. Thanks to the alignment of the vertical axis along the cutting line, it is also possible to perform sawing operations with the saw head tilted from 0° to 45° to the left.

Gamybos metai: 2007, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 319 00 00347, Schüco PDG E Cut with Ø500 mm blades. Additional blades are available. Fodjwbt E Nopfx Acuogh The machine is well maintained and operates perfectly.

Gamybos metai: 2000, Sąlyga: naudotas, Max. saw blade diameter: 350 mm Pneumatic material clamps Micro-spray device Saw table can be swiveled in both directions Fodpfsw Ddztsx Acusgh

Sąlyga: labai geros būklės (naudotas), Siūlomi 3 aliumininiai karkasiniai silosai. Anksčiau naudoti kaip granulių silosai liejimo įrenginiui. 2 x 75 m³, 1 x 95 m³. Liukas. Puiki būklė. Fgedjw I Efmjpfx Acueh

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2023, A mobile wet suction unit from Beck for the extraction and filtration of aluminium dusts and other potentially explosive dusts is available. Suction capacity: 1600 m³/h, pressure: 2500 Pa, suction port diameter: 200 mm, motor power: 1.85 kW, fan type: BN 30/28 Ex, machine dimensions (L/W/H): approx. 1050 mm / 1000 mm / 2250 mm, weight: approx. 210 kg. Documentation is available. On-site inspection is possible. Fedpfxju Nlkfo Acuogh

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, ALUMINIUM PIPES GRADE AW-5754-0 Fgsdpowtpr Aefx Acujh EXAMPLE DIMENSIONS: Length Diameter Diameter Tolerance Wall Thickness 4500 512 ±1.5 6 1450 512 ±1.5 6 5000 512 ±1.6 6

Sąlyga: naudotas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 571217, pjūklo disko skersmuo: 350 mm, bendras ilgis: 2 360 mm, bendras plotis: 1 700 mm, bendras aukštis: 1 750 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 120 mm, Apvalaus plieno pjovimo diapazonas ties 45°: 110 mm, sukimosi greitis (min.): 1 700 aps./min, sukimosi greitis (maks.): 3 400 aps./min, pjovimo aukštis (maks.): 120 mm, pjovimo ilgis (maks.): 180 mm, bendras svoris: 600 kg, darbinio aukščio: 950 mm, pjūklo disko greitis: 3 400 aps./min, įėjimo įtampa: 400 V, Kvadratinio plieno pjovimo diapazonas 45° kampu: 105 mm, Kvadratinio plieno pjovimo diapazonas prie 90°: 105 mm, pasukimo diapazonas: 45 °, suslėgto oro jungtis: 6 juosta, Įranga: dokumentacija / vadovas, Saw blade diameter: 350 mm Cutting range at 90 degrees – round: 120 mm Cutting range at 90 degrees – square: 105 mm Cutting range at 90 degrees – flat: 180 x 70 mm Fsdpfx Aewl Hufocusgh Cutting range at 45 degrees – round: 120/110 mm Cutting range at 45 degrees – square: 100/95 mm Cutting range at 45 degrees – flat: 135 x 60 mm Speed: 1,700 / 3,400 rpm Including roller conveyor For sale is a used COBRA 352 NC 5.0 fully automatic circular saw with semi-automatic function, suitable for cutting aluminium and light metal alloys. The machine is designed for use with carbide-tipped circular saw blades (HM). This machine enables mitre cuts from 45° right to 45° left. Thanks to the alignment of the vertical axis along the cutting line, it is also possible to perform sawing operations with the saw head tilted from 0° to 45° to the left.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Overhauled: 2024 Year of manufacture: 1994–2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed: 0 – 40 mm/s, continuously adjustable Cut length: 5–950 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After the retrofit, the machine is in a like-new condition, both technically and visually. Thanks to its equipment and construction, the machine can be used very efficiently for a wide range of applications. The programmed HMI control ensures simple and highly profitable operation of the system. The soundproof cabin minimizes noise emissions. The machine is fully overhauled in-house according to customer requirements. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul and/or replacement of all pneumatic cylinders - Renewal of valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine is equipped with: - Soundproof cabin - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: - Mass clamping system for parallel sawing of multiple workpieces - Flat magazine for automatic feed of up to 6 m long bar stock - Roller conveyors for bar stock Fodpfxeuiy Hrj Acujgh - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your personnel

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Set of aluminum cutter heads 203x230x45 mm and 203x150x45 mm Z10 Applications: • Machining of solid wood, both hard and soft • Compatible with four-side planers • Designed for preliminary and rough processing of flat surfaces • Suitable for removing up to 5 mm per pass • Adapted for higher feed rates of 80-180 m/min Specifications: • Overall height L - 230 mm - 2 pcs Fgsdpfxjtp I Sdj Acuoh • Overall height L - 150 mm - 2 pcs • Outer diameter D - 203 mm • Bore diameter d - 45 mm • Cutting knives - Z10 - 3 pcs, Z8 - 1 pc • Condition – used • Body material – aluminum • HYDRO clamping system Additional information: • The attached photos show the actual condition of the item for sale • The listed auction price excludes VAT and applies to the complete set of 4 pieces.

Gamybos metai: 2004, Sąlyga: labai geros būklės (naudotas), REEPACK REEFAST 100 ID-Nr. 1866 Fjdpfjf Ddbnsx Acuegh Rinnenschweißmaschine Reepack Modell Reefast 100, Baujahr 2004, mit zugehörigem Gasmischer. Verschließt automatisch 3 Stück Schalen gleichzeitig. Schalenmaße: 190 x 140 mm

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2014, Volume flow: 6300 Bm³/h, total pressure difference: 40 mbar, motor power: 11 kW, speed: 3000 rpm, machine weight: 400 kg. Components: dust extraction, water vacuum filter, separator. Including pH value dosing. Documentation available. On-site inspection possible. Expected to be available from April 2025. Fgjdpevzbhaefx Acush

Sąlyga: geras (naudotas), Gamybos metai: 2003, RIBO BE-AL-F1 dust extractor, wet vacuum filtration system, separator for grinding, polishing, cutting, brushing, deburring, suitable for aluminium and metals – wet processing. Extractor made of stainless steel. Fodpfxetpwrqo Acujgh The vacuum fan is positioned after the filter on the clean air side, which minimizes the risk of explosion initiation. An ideal filter unit for extracting and filtering hot, flammable, or highly hygroscopic dusts that are unsuitable for conventional cartridge or bag filters, ensuring low maintenance costs. Recommended for use in mechanical workshops; this system is an excellent solution for metal grinding, brushing, and polishing stations. Eex-rated fan 1.85 kW Capacity: 1600 m³/h Vacuum: 2500 Pa

Sąlyga: paruoštas naudoti (naudotas), Aluminium, Schnittlänge 6000 mm Sägeblattdurchmesser maximal 450 mm Schwenkbereich: 90°–45° pneumatisch Mit hydropneumatischem Sägevorschub Horizontale Werkstückspannung Vertikale Werkstückspannung Feststehende Einheit links, rechte Einheit verfahrbar Fsdpfxjwvqt Hj Acuegh Digitale Positioniersteuerung Rollbahn synchron mit rechter Sägemaschine fahrbar

Sąlyga: reikia remonto (naudotas), Gamybos metai: 2024, Completely overhauled: 2024 PLC control: Siemens S7 Saw blade diameter: 60 – 250 mm Motor power: 1.5 kW Saw blade feed: 0-20 mm/min Cutting speed: 15 - 170 m/min (steel) 630 – 1885 m/min (non-ferrous metals) Max. working area: 70x40 mm (steel) Max. working area: 60x40 mm (non-ferrous metals) Fodpfxjuiy I Aj Acuegh Round material working range: 5 - 70 mm (steel) Round material working range: 5 - 50 mm (non-ferrous metals) Feed length: 5 - 500 mm 5-9999 mm (multiple stroke) Max. feed rate: 500 mm/sec Weight (saw) approx.: 610 kg Dimensions LxWxH (saw) approx.: 2500 mm x 1000 mm x 2000 mm The machine will be completely overhauled in our facility according to customer requirements. Among others, the following components will be renewed: - Conversion to Siemens S7 PLC control - Upgrade to Siemens HMI operator panel - Replacement of pneumatic feed and ball screw - Replacement of servomotor and servo drive - Replacement of frequency converter for main saw drive - New electronic components - New pneumatic lines - Servicing/replacement of all pneumatic cylinders and valve terminals - Optimization of extraction system - Servicing of central and minimal lubrication systems - Replacement of general wear parts - Overhaul of machine bed The machine is additionally equipped with: - Minimal lubrication for superior cutting quality Thanks to its features and design, the machine is suitable for high-volume cutting of steel within close tolerances. Warranty: Unless otherwise agreed, we offer a 6-month warranty on all parts overhauled or replaced by us. Labor and wear parts are excluded from the warranty. Options: - Conversion of the sawing unit to a direct-drive main drive for processing non-ferrous metals and plastics (speed: 1000 – 3000 rpm) - 1000 mm feed unit - 2000 mm feed unit - 4 m inclined magazine - 6 m inclined magazine - Servo-controlled material feed - Servo-controlled saw feed - Conversion to prism jaws (60°) for high-volume clamping of round materials - Discharge system - Delivery and installation at your facility - Training for your staff

Gamybos metai: 1998, Sąlyga: naudotas, Long-cut saw for cutting aluminum profiles with feed pusher, in very good condition. Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Fsdpfx Aowx I Hvjcuegh Maximum feed length of the material pusher: 6,200 mm The machine is currently dismantled and in storage with us. Further technical data available on request.

Sąlyga: naudotas, rida: 546 550 km, galia: 184 kW (250,17 AG), pirmoji registracija: 08/2011, bendras svoris: 11 990 kg, kuro tipas: dyzelinas, spalva: žalia, ašių konfigūracija: 4x2, didžiausias leistinas svoris: 3 935 kg, tuščias svoris: 8 055 kg, padangos dydis: 285/70 r19,5, ratų bazė: 5 100 mm, stabdžiai: variklio stabdymas, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, emisijos klasė: Euro 5, pakaba: plienas-oras, krovinio erdvės tūris: 45 m³, krovinių skyriaus plotis: 2 470 mm, krovimo vietos ilgis: 7 400 mm, krovos erdvės aukštis: 2 500 mm, mašinos/transporto priemonės numeris: 459, Įranga: ABS, galinis keltuvas, kruizo kontrolė, oro kondicionavimas, patyrė avariją, trauki kontrolė, žemas triukšmo lygis,

Sąlyga: paruoštas naudoti (naudotas), Aluminiofrezarka Fedewvqmmopfx Acusgh Lager-Nr.: 2002578BXM

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Year of overhaul: 2024 Fedpfx Aceuiy Rqsujgh Max. saw blade size (carbide-tipped): 500/550 mm Saw motor drive power: 6 kW Saw motor speed, 6 steps: 2400–3200 rpm Saw blade cutting speed (500–550 mm): 3,800–5,500 m/min Saw blade feed, infinitely variable: 0–40 mm/s Saw height adjustment, infinitely adjustable, fully electronic Working range, square at 90° max.: 160 x 160 mm Working range, flat at 90° max.: 380 x 60 mm Working range, round at 90° max.: 165 mm Feed length: 10–9999 mm Feed speed (AC servo) max.: 400 mm/s Compressed air connection (on site): 6 bar Weight (saw) approx.: 2,850 kg Dimensions LxWxH (saw) approx.: 2,900 mm x 1,725 mm x 2,200 mm Footprint LxW: 2,900 mm x 1,725 mm The machine, following completed retrofit, is in as-new technical and visual condition. Thanks to its configuration and design, the machine can be used efficiently across a wide range of applications. The positioning system ensures simple and highly cost-effective operation. Due to the powerful motor, short cycle times can be achieved even when cutting thick-walled profiles or solid materials. The sound enclosure reduces the resulting noise emissions to a minimum. The machine is thoroughly overhauled in our facility according to customer requirements. The following components, among others, have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of ball screw - Replacement of servo motor and servo drive - Replacement of the frequency inverter for the main saw drive (optional) - New electrical components - New pneumatic lines - Maintenance or replacement of all hydraulic cylinders and valve islands - Overhauled extraction system - Overhauled minimum quantity lubrication system - Replacement of general wear parts - Overhaul of sound enclosure The machine is also equipped with: - Sound enclosure - Mechanical zero point adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts for our systems. Labor and wear parts are excluded from the warranty. Options: - Chain magazine for 4/6m materials - Splitter extension (for high-quality cutting surfaces without return marks) - Horizontal clamping of the saw line - Front cut stop in the material feed unit - Reinforced motor 11 kW - Roller conveyors - Delivery and installation at your facility - Training for your employees

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Max. carbide saw blade: 500 mm Saw motor drive power: 4 kW Saw motor speed: 2,800 rpm Saw blade cutting speed (500 mm): 4,400 m/min Saw height adjustment: infinitely variable, fully electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 150 mm Feed length, pneumatic: 5–560, 10–1,120 mm Compressed air connection, on-site: 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2,900 mm x 1,400 mm x 1,500 mm Required installation space LxW: 2,900 mm x 1,400 mm Additional Description Elumatec SA/ SAS 142 4 kW Retrofit Elumatec SA 142 4 kW Retrofit Fully automatic saw for non-ferrous metals and plastics The machine is in like-new technical and optical condition after completion of the retrofit. The machine is fully refurbished at our facility according to customer requirements. The following points have been renewed, among others: - Conversion to Siemens S7 PLC control system - Conversion to Siemens HMI operator panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve manifolds - Maintenance of minimum quantity lubrication system - Replacement of common wear parts - Overhaul of the enclosure Warranty: Unless otherwise agreed, we offer a 6-month warranty on all parts overhauled or replaced by us. Labor and wear parts are excluded from the warranty. Fgsdouiy Nyepfx Acuoh Options: - Extension of the sawing range for flat material, 90° max.: 300 x 120 mm - Chip breaker extension (for high-quality cut surfaces without drag marks) - Servo-controlled material feed - Servo-controlled saw blade feed - Heavy-duty clamping device for the gripper feed - Delivery and installation at your facility - Training of your personnel