Albert Goecker Kg pirkti naudotą (83 204)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Technical Data for EPS (Styrofoam) Compactor: Manufacturer: FZ-Recycling GmbH & Co. KG, Germany Model: FZR 320 Year of manufacture: 12/2022 Shredder drive power: 4 kW Compactor screw drive power: 7.5 kW Hydraulic unit drive power for holding clamp in compression channel: 1.1 kW Total connected load: 12.6 kW Current consumption: 32 A Compression ratio of compacted blocks to original material: approx. 50:1 (material dependent) Block weight after compaction: approx. 300kg/m³ (material dependent) Block dimensions: 320 x 320 mm, length variable Throughput performance: approx. 100 kg/hour, depending on material Achievable density: approx. 250 – 300 kg/m³ The compacted blocks are stacked to approx. 1,400 mm height on pallets and wrapped in stretch film. Machine dimensions: approx. 4,600 x 1,400 x 1,980 mm (L x W x H) Transport weight (compactor): 1,325 kg Condition of the Compactor: The compactor was only used sporadically, is in very good condition, and is immediately available. Owing to its low weight and the forklift shoes in the transport frame, the machine is mobile and can be used directly at the point of material collection, e.g., on construction sites. Electrical connection is via a CEE 32 A plug. Scope of Supply: Gkedpfx Acou Thkaeusc 1 unit EPS compactor, ready for connection and operation Remarks: The complete documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available. Inspection by appointment possible. We accept no liability for technical details or possible errors.

Gamybos metai: 2019, Sąlyga: paruoštas naudoti (naudotas), Galimas KG Bremen maišytuvo indas ir du maišytuvai PRG bei IKA. 1) KG Bremen maišytuvo indas, pagaminimo metai: 2019, maks. darbinis slėgis: atmosferinis, maks. darbinė temperatūra: 80°C, talpa: 1150 l, maks. dvigubo apvalkalo darbinis viršslėgis: 5 bar, maks. dvigubo apvalkalo darbinė temperatūra: 80°C, medžiaga: 1.4301. 2) Precizinis maišytuvas PRG R112M-6, pagaminimo metai: 2004, maišytuvo ilgis: 930 mm, maišymo organo skersmuo: 160 mm. 3) Precizinis maišytuvas IKA RF 04-T-1085, pagaminimo metai: 1999, bendras ilgis: 1100 mm, maišymo organo skersmuo 1/2: 160 mm/200 mm. Galima apžiūra vietoje. Gedexhntropfx Acujkc

Sąlyga: naujas, 21.25 m² mezzanine including staircase, railings on two sides, top edge at 300 cm, 500 kg/m² load capacity, immediately available from stock, accessible with a pallet truck, system mezzanine, steel platform, storage level Specifications: - Length: 5000 mm - Width: 4250 mm - Size can be extended upon request - Clear height below the mezzanine: 2612 mm - Support grid: 4605 x 3850 mm - Additional floor covering overhang of 200 mm - Supports, stairs, railing posts, cross bracing and struts powder-coated in RAL 7016 - Handrail, knee rail, upstand, main & secondary beams galvanized - Floor covering: 38 mm chipboard P6, top natural & bottom white - New from stock Wietmarschen - IMMEDIATELY AVAILABLE The mezzanine includes: - 04 x support posts - 02 x main beams C+350 - 06 x secondary beams S+260 - 01 x cross brace - 02 x struts - 10 x chipboard panels - 01 x staircase, 37° incline - Approx. 8.25 linear meters of railing Gkedpfx Ajxlpy Iecujc - Incl. connecting material & screws -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €5,026.00 net €5,980.94 gross You will receive an invoice with separately stated VAT. Transport: Delivery can be made upon request by our partner carrier, costs depending on postcode. Assembly: Our trained staff are happy to assist you with the professional assembly and disassembly of your equipment if required. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning to ordering and assembly. Interested or have questions? Contact us by message or phone. You can find our phone number on our company page. ☎️ We are available Monday to Friday from 08:00 to 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Judėjimo sritis: 550–1700 mm Gkjdpfx Acjxbga Reuec Keliamoji galia: 1600 kg Griebtuvo plokštės dydis: 1000 x 1000 mm

Sąlyga: naujas, Included in the scope of delivery: 01x Wire mesh shelf, new Material finish: Sendzimir galvanized Design: drop-on shelf gratings, both sides edged Total depth: 1,112 mm Clear support span: 1,000 mm Overall width: 890 mm Mesh size: 106 x 72.5 mm Godpfx Aoilk Ngscuekc Wire thickness: 3.8 mm Number of support bars: 4 pcs. Unit weight: approx. 5.14 kg Technical data: Tested load capacity: 500 kg according to ANSI MH 26.2 For frame depth: 1,100 mm Assumed beam width: 50 mm For indoor use only Possible applications: Compartment size / Modules required per compartment 1,100 x 1,800 mm / 2 pcs. 1,100 x 2,700 mm / 3 pcs. 1,100 x 3,600 mm / 4 pcs. Heat shield panels: Upon request, we can offer you heat shield panels (see photo material) for purchase; prices upon request. Fire protection requires special standards. Therefore, the wire mesh can be supplied with a welded-on heat shield panel. If you require a push-through guard for cardboard boxes, the heat shield panel can also be supplied with an edging. General information about the item: This item is available for collection only. If transport or shipping is required, this will incur additional costs which can be provided upon request depending on delivery location and scope.

Sąlyga: labai geros būklės (naudotas), Steady rest (28387) Gksdpfx Acjmkffdjusc SPH 360/250 mm Weight: 57 kg Dimensions: see drawing

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, galia: 9,7 kW (13,19 AG), Technical Data Cardboard Shredders (2-shaft shredder): Manufacturer: Presto GmbH & Co. KG Model: PZA Gjdpfxju Tha Ij Acuskc Year of manufacture: 2011 (38,761 operating hours), 2007 (52,386 h), 2007 (52,998 h), and 2007 (55,325 h) - all hours as per meter reading November 2021 Throughput capacity: 130 m³/hour Speed: 37/9 rpm Motor power: 7.5 / 2.2 kW Electrical connection: 32 A Shredder interior dimensions: 1,490 x 1,320 x 530 mm (L x W x H) External dimensions without cover: 2,308 x 1,320 x 685 mm (L x W x H) Machine weight: 0.45 t Application of the systems: The 4 Presto PZA cardboard shredders were in operation until 15.12.2021 in a Dutch logistics center, used to pre-shred loose, erected cartons from the returns department prior to baling. Cartons were manually fed onto the infeed conveyor and transported directly to the shredder via a belt conveyor, where they were shredded. The pre-shredded cardboard was then conveyed several hundred meters to the baler and compacted. Scope of delivery: 4 units Presto Cardboard Shredders (2-shaft shredder) type PZA Remarks: The shredders were an essential component of the disposal line and were well-maintained to ensure high availability for the returns department. The machines are in good condition and immediately operational. Price is per unit ex works our warehouse in Siddeburen, Netherlands. Complete documentation (operation manual, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection by appointment possible. We do not accept liability for technical specifications or possible errors.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, spalva: sidabras, Gamybos metai: 2022, The autopsy table is mounted on a central support column and features height adjustment from 750 to 1000 mm. The entire table is made of stainless steel (material no. 1.4301 – ANSI 304). The worktop is fitted with a high, contoured edging and a seamlessly welded basin measuring 400 x 500 x 200 mm, with a pipe overflow and strainer insert installed at one end of the table. Additionally, the tabletop is equipped with a waterproof, sound-insulating membrane and has a negative tilt angle sloped towards the drain. All electrical connections are integrated into the base and are easily accessible via an inspection opening. The ST 10/150 autopsy table model includes the following features: • Knee-operated mixer tap for hot and cold water, mounted on the central column • 3-metre shower hose with manual spray nozzle • 2 waterproof electrical sockets • Electrical and water connections factory-installed Gkedpfx Asw Rym Djcusc • UP/DOWN button for height adjustment via integrated electromechanical drive DIMENSIONS: 260x85cm Power supply: 230V Load capacity: 300kg. The table is brand new, factory-packed on a pallet (as shown in the photo), ready for installation, complete with all necessary accessories. The device is new and comes from a bailiff liquidation sale, which explains the attractive price. The official retail price of this model is about 20k EURO!!! Additional data available in the attached files below.

Sąlyga: naujas, Gamybos metai: 2024, mašinos/transporto priemonės numeris: BN120XT-HA-X,

Gamybos metai: 2014, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Aprašymas: Parduodama profesionali Format 4 Shaper Machine Profil 45Z staklė, pagaminta FELDER KG (Austrija). Šis įrenginys idealiai tinka baldų gamybai ir medienos apdirbimui, kai reikalingas aukštas tikslumas ir kokybė. Techninė informacija: Gamintojas: FELDER KG Modelis: Format 4 Shaper Machine Profil 45Z Kilmės šalis: Austrija Gkodpfxsxfawke Acusc Tvirtas, itin tikslus įrenginys, skirtas intensyviai gamybai Patikima ir stabili konstrukcija ilgalaikiam našumui Būklė: Labai gera, paruošta darbui. Vieta: Mintia, Hunedoara apskritis (Rumunija)

Sąlyga: naujas, Included in the scope of delivery: 01x Wire mesh shelf, new Material finish: Sendzimir galvanized Design: drop-in shelf panels, edged on both sides Total depth: 1,112 mm Clear support width: 1,000 mm Total width: 890 mm Mesh size: 106 x 53 mm Wire thickness: 3.8 mm Number of bearer bars: 7 pcs. Unit weight: approx. 7.53 kg Technical data: Tested load capacity: 1,000 kg according to ANSI MH 26.2 For frame depth: 1,100 mm Assumed beam width: 50 mm Intended for indoor use only Possible applications: Gkedpfx Aoilk Nrecuec Compartment size / Modules required per compartment 1,100 x 1,800 mm / 2 pcs. 1,100 x 2,700 mm / 3 pcs. 1,100 x 3,600 mm / 4 pcs. Heat Shield Plates: Upon request, we can offer you heat shield plates (see images) for purchase; prices available on request. Fire protection places special requirements. Therefore, the wire mesh shelves can be equipped with a welded-on heat shield plate. If you require an anti-push-through guard for cartons, the heat shield plate can also be supplied with a bent edge. General information about the item: This item is only offered for collection. If transportation or shipping is additionally required, this will incur extra costs, which can be requested from us individually depending on the delivery location and scope.

Sąlyga: labai geros būklės (naudotas), Steady rest (28388) SPH 360 mm Weight 37 kg Dimensions: see drawing Gkjdpomkfd Sjfx Acusc

Sąlyga: naudotas, Gamybos metai: 2009, veikimo valandos: 20 536 h, spaudimo jėga: 80 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, tuščias svoris: 16 000 kg, Technical Data Press: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput capacity at bulk density of: - 30 kg/m³: approx. 6.0 t/hour - 50 kg/m³: approx. 10.5 t/hour - 100 kg/m³: approx. 17.5 t/hour Bale weights at approx. 1.2 m bale length: up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Press dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Press transport weight: 16 t Special equipment: - Wear-resistant floor made of HARDOX steel - Special press ram for compacting "difficult" materials and loose bulk goods of small particle size - Control cabinet air conditioning - Machine base height increase: 200 mm Gsdpfou Thypox Acuskc Note: The machine is currently located in our workshop and is being partially overhauled. We anticipate that the overhaul work will be completed by the end of October and the machine will then be tested and released for sale.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Temperature block calibrator with accessories Temperature sensors are subject to mechanical, thermal, and chemical stresses. Over time, this leads to drift. Only regular calibration of the sensors provides information about the difference between actual and measured temperature and makes the specific drift behavior visible. Dry block calibrators and micro calibration baths are used for checking and calibrating a wide variety of temperature measuring devices and temperature sensors. Checking mechanical, electro-mechanical, or electronic measuring devices can be done effortlessly. The compact and robust instruments from SIKA are easy to transport, simple to operate, and feature all the performance characteristics required for each testing application. The frequent change of deployment locations in the field or in production, as well as stationary use in measurement workshops or test and inspection laboratories, results in different requirements for a temperature calibrator. Therefore, the instruments must be lightweight and handy for easy and quick on-site use. SIKA offers various temperature calibrators covering a range from -55 °C to 1300 °C. Gkedjwc T Uajpfx Acusc

Gamybos metai: 2015, Sąlyga: naudotas, Nuotekų neutralizacija Talpa: 8 m3/h Valdymas / Kontrolė: Valdymo skydas su jutikliniu ekranu / WAGO Įranga: Neutralizacijos bakas (37 hl); Galutinis kontrolės bakas (4,5 hl); Šarminių medžiagų bakas; Rūgšties bakas; Siurbliai; Matavimo, jutiklių ir reguliavimo technologijos; Valdymo skydas Gkodpfx Asxbqr Decuoc

Sąlyga: naujas, didžiausias leistinas svoris: 2 700 kg, Gamybos metai: 2025, Vlemmix mašinų transportavimo priekaba 2700 kg, 300x150x34 Nauja Leistinas bendras svoris 2700 kg Gedpfew Aiwqox Acujkc Vidinis krovimo plotas: 300/150/34 cm Išoriniai matmenys: 482/210/167 cm Galimas leistinas bendras svoris: 2700 kg Naudingoji apkrova: 2090 kg Savaeigė masė: 610 kg Ašys: 2 x 1350 kg Padangos: 195/50R13C Žema pakrovimo platforma Ašys su Knott stabdžiais Rampos su dujų spyruokle, rampos aukštis 130 cm Rampos su perforuota grotelėmis Kaina 3 350,00 € be PVM Kitos priekabos su 3,5 t svoriu pagal užklausą Apžiūra galima bet kada, susitarus telefonu. Visa informacija pateikta be garantijos.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, mašinos/transporto priemonės numeris: 97-006000S, Parduodamas rašalinis spausdintuvas Jet3 serijos, gamintojas Paul Leibinger GmbH & Co. KG, pagamintas 2020 metais. Įrenginys yra naudotas ir šiuo metu nenaudojamas. Mašina atitinka naujausius saugos standartus. Įrenginys yra paruoštas darbui. KORPUSAS - pagamintas iš nerūdijančio plieno - Plotis: 486 mm, Gylis: 286 mm, Aukštis: 446 mm - Svoris: 20,5 kg SPAUZDINTUVO GALVUTĖ - Nerūdijančio plieno korpusas - Pilnas ilgis: 265 mm, Skersmuo: 43 mm Gksdpfjxb Uqdjx Acuoc - Svoris: 1,5 kg Įrenginio apžiūra galima pagal susitarimą ir pageidavimą. Dėl išsamesnės informacijos prašome susisiekti. (Nuotraukos dar bus pridėtos)

Sąlyga: labai geros būklės (naudotas), Heavy-duty wooden pallets with 3 runners, accessible from all four sides Length: 1680 mm Width: 1250 mm Board thickness: 45 mm Weight: 82.5 kg Multiple units available Gjdpol Uvv Tofx Acuokc

Sąlyga: geras (naudotas), Gamybos metai: 2012, veikimo valandos: 12 078 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 88 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 800 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 750 kg, bendras svoris: 30 000 kg, alyvos bako talpa: 2 000 l, galia: 98 kW (133,24 AG), tūrio srautas: 643 m³/val, Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 R-FU Year of Manufacture: 2012 Total Operating Hours: 12,078 hours (as of September 2025) Pump Operating Hours: 6,616 hours (effective pump runtime) Number of Bales Produced: 65,792 bales (as of September 2025) Main Pressing Force: 880 kN Specific Pressing Force: 120 N/cm² Shear Edge Press-Out Force: 120 kN Feed Opening Dimensions: 970 x 1,800 mm Theoretical Idle Cycle Time: 8.3 seconds Theoretical Throughput Capacity: 643 m³/hour Bale Dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive Power: 2 x 45 kW, frequency-controlled Connected Load: 98 kW Total Power Consumption: 192 A Fuse Protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput Rates at Bulk Density: - 20 kg/m³: 12.86 t/hour - 50 kg/m³: 32.15 t/hour Bale Weights at approx. 1.2 m Bale Length: 650 up to 750 kg/bale, depending on material Hydraulic Oil Tank Volume: 2,000 L HVI 46 PLC Control: Siemens S7-300 Operating Panel: Siemens TP 700 Press Dimensions (assembled): 18,000 x 4,300 x 3,270 mm (L x W x H) Gsdjxcngnepfx Acuokc Installation Dimensions with Conveyor System: 18,000 x 22,000 x 5,765 mm (L x W x H) Weight (approx.): 30 t (main press approx. 20 t, press channel with bale clamp approx. 10 t) Special Machine Equipment: • Access lock by key transfer system • Electro-hydraulic locking of the press carriage during the tying process to prevent the press ram from moving position with highly expansive materials Additional Ordered Special Equipment: • Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW drive system at identical performance output • Manual switching on/off for number of wire ties to save tying wire for non-expansive materials • Shear edge press-out with 121 kN pressing force • Sensor-based wire monitoring; machine stops on wire break or end of wire • Bale chute • Optical warning signal, mounted on control cabinet Condition of the Baler: The entire press system (baler and conveyor technology) is in good, ready-to-operate condition. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of Manufacture: 2012 Drive Power: 7.5 kW Belt Speed: 0.05 – 0.4 m/sec Feed Belt Length: 6,000 mm Feed Belt Sidewall Height: 400 mm Incline Belt Length: 9,000 mm Incline Belt Sidewall Height: 800 mm Gooseneck Length: 1,500 mm Incline: 30° Nominal Width: 1,800 mm Usable Width: 1,700 mm Belt Quality: EP-500/4 Steel Carriers on Rubber Belt: 50 x 50 mm Hollow Pin Chain, Pitch 125 mm, Rollers 36 mm Drive Shaft Height above Floor: 4,284 mm Overall Conveyor Height: 5,765 mm Transport Dimensions Feed Belt: approx. 7,000 x 2,200 x 1,250 mm (L x W x H) Transport Dimensions Incline Belt: 13,000 x 2,500 x 2,900 mm (L x W x H) Pit Dimensions for Conveyor: 14,765 x 3,260 x 1,250 mm (L x W x H) Scope of Delivery: For sale: the feed conveyor, the baler with bale chute, and the wire draw stations (wire not included). Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is complete. Inspection is possible by appointment. We accept no liability for the technical information provided or for possible errors.

Sąlyga: naudotas, Funkcionalumas: nepatikrintas, High-pressure water pump, e.g., for - laboratory applications or Gedpjwc Ubnsfx Acuskc - air humidification (cooling of outdoor areas / terraces) Pressure: 100 bar Voltage: 230 V Speed: 1,400 rpm

Sąlyga: naudotas, Gamybos metai: 1979, Mašina (papildomai): Likutinės šarmos bakas Talpa: 400 hl Gjdpfx Ajxbpr Nocuokc Temperatūra: 20 °C Ilgis: 5,8 m Plotis: 3,5 m Aukštis: 3,85 m Padėtis: gulima Įranga: izoliuotas; perpumpavimo įrenginys

Sąlyga: naujas, TECHNICAL DATA: - Base area: 5,000 x 5,000 mm [other configurations available] - Grid: 5,000 x 5,000 mm - Finished floor level: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm chipboard, P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new The platforms are modularly extendable in the specified grid as standard. Other sizes and heights available upon request. Our team will be happy to advise you! Scope of delivery: - Columns - Primary and secondary beams - Bracing (cross ties) - Floor covering - Fastening hardware PRICES: Variant I: Base area: 25 m² | Size: 5,000 x 5,000 mm | €2,711.50 net, plus transport costs and VAT Variant II: Base area: 50 m² | Size: 5,000 x 10,000 mm | €4,756.00 net, plus transport costs and VAT Variant III: Base area: 75 m² | Size: 5,000 x 15,000 mm | €6,659.80 net, plus transport costs and VAT Variant IV: Base area: 100 m² | Size: 5,000 x 20,000 mm | €8,662.00 net, plus transport costs and VAT Variant V: Base area: 100 m² | Size: 10,000 x 10,000 mm | €8,381.70 net, plus transport costs and VAT Variant VI: Base area: 150 m² | Size: 10,000 x 15,000 mm | €12,162.50 net, plus transport costs and VAT Variant VII: Base area: 200 m² | Size: 10,000 x 20,000 mm | €15,136.80 net, plus transport costs and VAT Variant VIII: Base area: 300 m² | Size: 20,000 x 15,000 mm | €22,782.72 net, plus transport costs and VAT Further variants available Optional accessories: - Handrail - Flush wall connection - Stairway - Transfer station - Collision guard YOUR CONTACT PERSONS WITH US: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & FABRICATION Gkedpsxdvhpjfx Acujc This platform system represents an example from our standard range. Naturally, we design and manufacture your storage mezzanine exactly to your operational requirements – tailored to area, load capacity, installation height and intended application. Our design department will issue you an individual, non-binding quotation based on your requirements. Whether new installations, expansion, or modernization of existing systems – we support you with sound technical expertise and practical solutions. TRANSPORT & ASSEMBLY We are happy to assist with transport and assembly. This item is available for collection. Delivery or shipping is possible for an additional charge. The exact costs depend on the delivery location and volume of the shipment, and can be requested individually from us. PAYMENT TERMS Payment terms are to be agreed in the event of an order. Prices are quoted per unit/net or as specified in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, deals in new and used products from the fields of warehouse logistics, materials handling technology, storage platforms, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. Please contact us if you have any questions. ✅ Four Factors for Success – The Key Components of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2014, veikimo valandos: 5 612 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 48 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 1 250 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 550 kg, bendras aukštis: 2 800 mm, bendras svoris: 12 000 kg, transporto aukštis: 2 800 mm, alyvos bako talpa: 300 l, galia: 30 kW (40,79 AG), tuščias svoris: 12 000 kg, tūrio srautas: 332 m³/val, Technical Data – Baler: Gkodpfx Aevtpq Hecujc Manufacturer: HSM GmbH + Co. KG Model: VK 4812 Year of construction: 2014 Operating hours: 5,612 hours (as of August 2025) Main press force: 48 t Specific press force: 58.2 N/cm² Feed opening dimensions: 1,250 x 1,020 mm Theoretical cycle time: 11.2 s Theoretical throughput: 332 m³/h Bale dimensions: 1,100 x 750 x 600 to 1,200 mm Drive power: 30 kW Total connected load: 32 kW Rated current: 59 A Binding: 4-fold horizontal, fully automatic Throughput rates, depending on material: Bulk density 20 kg/m³: up to 6 t/h Bulk density 50 kg/m³: up to 13 t/h Bale weights: up to 550 kg, depending on material PLC control: Siemens SIMATIC S7-200 Operator panel: Siemens HMI touch panel Hydraulic tank capacity: 300 L Oil type: HVI 46 Machine installation dimensions with bale chute: 10,046 x 4,387 x 2,705 mm (L x W x H) Transport dimensions (baler only): 8,500 x 2,500 x 2,750 mm (L x W x H) Machine weight (baler): approx. 12 t Scope of delivery: – HSM VK 4812 baler, without hydraulic oil, without conveyor technology – Two wire spool boxes for 8 x 40 kg wire spools, without wire – Bale chute – Machine documentation in German Remarks: The baler is equipped with an oil cooler and volt-free contacts for external control. Operation at the control cabinet is on the left in pressing direction, the needle unit is on the right side and can be folded backwards for transport. The baler has been partially overhauled and tested in our workshop, see photos. Documentation (operating instructions, CE declaration, electrical/hydraulic schematics) is available in German. Viewing is possible by appointment. We do not assume liability for the technical information or for any possible errors.

Sąlyga: naudotas, TECHNICAL DATA: - Load capacity: 500 kg/m² - Grid size: approx. 4,200 x 5,000 mm - Top edge of flooring: approx. 4,030 mm - Clear height: approx. 3,700 mm - Colour: blue - Condition: used Scope of delivery: - Columns - Main and secondary beams - Cross bracing - Floor decking PRICING: Price: from €45.00 net per m², ex stock Nordhorn. OPTIONAL ACCESSORIES: - Guardrail - Flush wall connection - Staircase - Transfer station - Impact protection Gsdpfxjumbp Rj Acuskc YOUR CONTACT PARTNERS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipping is possible at an additional charge. The extra costs depend on the delivery location and scope of shipment and can be requested from us individually. TERMS OF PAYMENT Payment terms are to be agreed upon in the event of an order. The price is quoted as a unit price/net price, or as otherwise specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, is a trading company for new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for commerce, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us. Connect Four – The four success modules from DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 19 750 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 970 mm, pildymo angos ilgis: 1 800 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 750 kg, alyvos bako talpa: 2 000 l, tuščias svoris: 33 000 kg, tūrio srautas: 643 m³/val, Technical Data Press: Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 R-FU Year of Manufacture: 2015 Operating Hours: 19,750 hours (as of July 2025) Number of Bales Pressed: 24,760 bales (as of July 2025) Main Ram Pressing Force: 1000 kN Specific Pressing Force: 120 N/cm² Pressing Force of Cutting Edge Ejector: 121 kN Feed Hopper Dimensions: 970 x 1,800 mm Theoretical Cycle Time (Idle Run): 8.3 seconds Theoretical Throughput: 643 m³/hour Bale Dimensions: 1,100 x 750 mm (Length variable from 600 up to 2000 mm) Drive Power: 2 x 45 kW, frequency controlled Connected Load: 110 kW Total Current Draw: 213 A Fuse Protection: 250 A slow blow Tying System: 5-fold horizontal, fully automatic Throughput at Bulk Density of 20 kg/m³: 12.86 t/hour Throughput at Bulk Density of 50 kg/m³: 32.15 t/hour Bale Weights at Length approx. 1.2 m: 650 up to 750 kg/bale, depending on material Hydraulic Oil Tank Capacity: 2,000 L HVI 46 PLC Control: Siemens S7-300 Operator Panel: Siemens TP 700 Press Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation Dimensions with Conveyor System: 35,000 x 8,480 x 7,745 mm (L x W x H) Approx. Weight of Press: 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Special Machine Equipment: Access locking via key transfer system Electro-hydraulic locking of the press carriage during the tying process to prevent the ram from moving position when processing highly expansive materials Additionally Ordered Special Equipment: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard drive 2 x 45 kW, with the same performance output Manual enabling/disabling of the number of wire ties to save tying wire on non-expansive material Cutting edge ejector with 121 kN pressing force Sensor-based wire monitoring, with press shutdown in case of wire break or end Bale slide Visual warning signal mounted on the control cabinet Gkodoxb Dvvepfx Acusc Press Condition: The complete baling system (press and conveyor system) is in good, ready-to-use condition. The equipment is cleaned weekly by the operator, lubricated, and serviced according to manufacturer specifications. Technical Data of Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Model: Chain Belt Conveyor KF 1800 Year of Manufacture: 2015 Belt Speed: 0.36 m/second Feed Belt Length: 7,000 mm Incline Belt Length: 14,500 mm Swan Neck Length: 1,550 mm Incline: 30° Nominal Width: 1,800 mm Usable Width: 1,638 mm Overall Conveyor Height: 7,745 mm Pit Dimensions for Conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: The sale includes the feed conveyor, the cross-distributor conveyor, and the baler with bale slide, but without wire feed stations and without wire. Remarks: Complete documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is available. Inspection by arrangement is possible. We accept no liability for the technical data or any potential errors.