250 Kva pirkti naudotą (21 132)

Sąlyga: naudotas, 2-pillar punching tool, separating tool, punching die, punch, punching matrix, punch stamp, - 2-pillar: Punching tool - Mounting: Ø 40 mm pin - Dimensions: 300/360/H375 mm - Weight: 130 kg Hsdpfx Ajdxxrrecusfn

Sąlyga: paruoštas naudoti (naudotas), Schmalenberger DMG 2 3208/2 50/60Hz centrifugal pump, terminal board cover missing (see photo), serial number as per photo, used item with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hfjdpfx Acoi D Nu Aeusn

Sąlyga: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: K500-50739, bendras ilgis: 14 000 mm, bendras aukštis: 2 500 mm, bendras plotis: 3 600 mm, įvesties srovės tipas: trifazis, produkto aukštis (maks.): 100 mm, gaminio aukštis (min.): 30 mm, gaminio ilgis (min.): 500 mm, gaminio ilgis (maks.): 1 800 mm, gaminio plotis (maks.): 1 500 mm, gaminio plotis (min.): 600 mm, įėjimo įtampa: 400 V, suslėgto oro jungtis: 6 juosta, įėjimo srovė: 33 A, darbinio aukščio: 900 mm, stalo plotis: 1 700 mm, stalo ilgis: 2 000 mm, praėjimo aukštis: 250 mm, paskutinio kapitalinio remonto metai: 2022, ruošinio svoris (maks.): 100 kg, Įranga: dokumentacija / vadovas, Overall machine dimensions: Width: 3,600 mm Length: 10,600 mm (excluding feed and discharge area) Height: 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Characteristics of PE shrink flat film • Shrink film suitable for shrink wrapping process. (Top and bottom film must be sealable on the sides in the tunnel.) • Biaxial shrinkage: approx. 50-60% longitudinal, approx. 40-50% transverse • Antistatic treated. • Shrink film with needle perforation improves the shrink process and features higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinkable, needle-perforated. • Wound tightly and with clean edges on rolls. Film thickness: Application: approx. 40 – 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Hjdpfx Aevvlyiecuofn Core outer diameter: min. 90 mm Lower film calculation: Pack width + 200-250 mm Upper film calculation: Pack width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor belt (W x L): 1,700 x 2,000 mm / Feed rate: 13 – 23 m/min. Roller conveyor after tunnel (W x L): 1,700 x 2,000 mm / Feed rate: 13 – 23 m/min. KFE Standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (clearance height): max. 250 mm / Max. film roll diameter: 350 mm Film thickness: approx. 40-60 μm PE film, good quality / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 – 1,600 mm / Feed rate, adjustable: 13 – 23 m/min. Shrink tunnel ST/II -1800-3000-300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Feed rate, adjustable: 6 – 23 m/min. Machine can be inspected at production site.

Gamybos metai: 1997, Sąlyga: naudotas, • for window and door profiles made of aluminium and PVC Hodolkfu Uspfx Acusfn • Milling spindle length (mm): 90 • Maximum cutter diameter (mm): 250 • Milling depth up to (mm): 80 • Milling width (mm): 330

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 20 kg, -KOM 3124- Offered here is a used Brinkmann immersion pump, model TA 302/250. The pump can be mounted directly onto a tank. Dimensions: approx. (550 mm x 180 mm x 210 mm) Immersion depth: 250 mm Hfjdpfx Aewl U Aqjcusn Weight: approx. 20 kg Voltage: 230/400 V Frequency: 50 Hz Current: 4.3 / 2.5 A Speed: 2850 rpm

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 462958, Temperature control unit for use in plastic injection molding and industrial applications up to 250 °C. Technical specifications: Voltage: 400 V Power: 13.7 kW Current: 21 A Volume: 11 liters Supply temperature: 250 °C Frequency: 50 Hz Dimensions: 88 x 32 x 96 cm Total weight: 150 kg The Regloplas temperature control unit model 250/12/F30/1K/RT45 offers a reliable and precise solution for temperature regulation in industrial applications. Thanks to its compact design, it is ideal for use in confined spaces without compromising on performance. The unit combines advanced heating and cooling systems, enabling precise control of process conditions and thus contributing to the quality assurance of your products. The intuitive controls ensure easy operation and adjustment to various requirements, while the robust design guarantees long service life. Hfjdpfjvc Dpcjx Acujn With rapid response times and efficient energy usage, the 250/12/F30 not only optimizes your production processes, but also helps to reduce operating costs.

Gamybos metai: 2000, Sąlyga: naudotas, Fire extinguisher, fire hose cabinet, fire hose box, fire extinguisher cabinet, fire safety cabinet - Fire detector, foam extinguisher, and wall hydrant with hose reel Hfedpjttc Tcjfx Acusn - Foam extinguisher: Gloria - Hose reel: Gesa pressure hose DN 25, length 30 m - Quantity: 1x fire safety cabinet available - Dimensions: 1175/250/H920 mm - Weight: approx. 100 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Seydelmann AMR1800/250 Mischwolf mit CO2. 1800-Liter-Trichter mit 250-mm-Kopf. Ausgezeichneter Zustand. 2 Einheiten auf Lager, Maschinen mit sehr hoher Ausstattung. Neupreis über 300.000 EUR. Hodpfxoifk Icj Acujfn Außerdem verfügen wir über viele weitere (22) Seydelmann-Maschinen aus derselben Produktionslinie, alle zur gleichen Zeit erworben. Für weitere Informationen kontaktieren Sie uns bitte.

Sąlyga: labai geros būklės (naudotas), Chain Hoists - DEMAG / STAHL - LIFTKET - 14 units: 1. Demag DKUN 10 - 2000 kg. 2. Demag PK 10 - 1000 kg. 3. Demag DKUN 5 - 500 kg. 4. Demag D-BE - 160 kg. 5. Demag PK 2 F - 500 kg. 6. Demag PK 2 N-F - 250 kg. 7. Demag PK 1 N - 125 kg. Hfsdpfx Asvv Idwecusn 8. Demag DKUN 2 - 250 kg. 9. Demag PK 2 N - 500 kg. 10. Demag PKVUN 1 - 125 kg. 11. Demag Motor PKUN 1 - 125 / 250 kg. 12. Stahl T 405 M - 1000 kg. 13. Stahl T 302 S - 500 kg. 14. Liftket Star 021/51 - 500 kg.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2015,

Sąlyga: naujas, Gamybos metai: 2024, Unsere neue Generation der Doppelwellen-Mehrblattkreissäge CML/2/250 steht ab sofort der Branche zur Verfügung... Selbsttätig an die Schnitthöhe angepasste Vorschubgeschwindigkeit... Hfsdottlamepfx Acuon Durch auf- und abwärts verstellbare Sägewellen können Sägeblätter mit unterschiedlichen Durchmessern eingesetzt werden Automatische Positionierung je nach Schnitthöhe Einstellbare Schnitthöhe von 20 mm bis 250 mm

Sąlyga: geras (naudotas), Press Machine EDEL - Maximum capacity: 25 tons - Throat depth: 26 cm - Height: 170 cm - Width: 65 cm Hedpfx Acegn Rnxjuofn - Depth: 50 cm Good condition, fully operational. Can be inspected and tested on site. Shipping available internationally. Inspection: As a general note, to avoid misunderstandings, I recommend inspecting and testing the item under power before purchase. Please ask any questions prior to buying to avoid uncertainties. For general inquiries or to arrange a viewing appointment, I am available at the phone number listed below or above at any time. Subject to errors in description and prior sale. VAT will be shown separately on my invoices. Shipping via freight carrier.

Sąlyga: geras (naudotas), T-slot plate, measuring plate, measuring table, clamping plate with T-slots, plate field, welding table -Dimensions: 250 x 1450 x H170 mm -Plate thickness: 28 mm -Plate features: with support ribs -1x T-slot: 12 mm Hfedpfscbqqxox Acuen -1x longitudinal slot -Weight: 156 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), Galinio frezavimo staklės Hsdpercfumofx Acuefn

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1991, spaudimo jėga: 250 t, darbinis greitis: 240 mm/s, Naudojama Rhodes Hydraulic 250t hidraulinė presas pardavimui 250 / HDS Naujas PLC valdiklis (BEIJER ELECTRONICS) įdiegtas 2023 m. kovo mėn. MAKSIMALI SLĖGIO JĖGA: 250 tonų EIGOS ILGIS - reguliuojamas nuo 30 mm iki 500 mm Hfedpfovt Agnsx Acuen STUMOKLIO GREIČIAI: - Pristatymas: 240 mm/s - Presavimas: 22 mm/s - Grąžinimas: 230 mm/s 2 matrico amortizatoriai (DIE CUSHIONS) - kiekvienas po 35 t slėgio jėgos Amortizatoriaus eiga - iki 200 mm max. SERIJOS NUMERIS: Gamybos metai: 1991 Maksimali spaudimo jėga: 250 tonų 35 tonos jėgos kiekvienam amortizatoriui

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2016,

Sąlyga: naudotas, Techniniai duomenys: Šlifavimo skersmuo: 550 mm Šlifavimo ilgis: 2600 mm Centro aukštis: 250 mm Apdirbimo skersmuo: 500 mm Šlifavimo disko skersmuo: 750 mm, plotis: 80 mm, skylė: 304,8 mm Hsdpfx Ajw Rktbscuefn Aušinimo skysčio įranga: 90 l/min Mašinos svoris apie: 8,2 t Mašinos matmenys apie Ilg.xPlot.xAukšt.: 6,4 x 2,2 x 1,9 m Finibalanz balansavimo įrenginys Griebtuvas su cilindriškumo paklaidos korekcija, skaitmeninis indikatorius X=0,001 - Z=0,01 Spindulio įrenginys 2-10 mm

Sąlyga: naudotas, Technical Details: Pressure: 250 t Stroke: continuous idle 40 mm Ram stroke: adjustable 36 - 126 mm Ram adjustability: 110 mm Ram clamping surface: 630 x 500 (LxW) mm Clamping surface: 1000 x 750 x 100 mm Distance table/ram: 400-526 mm Hfodpfx Aceu N Ddwsuen Through-hole in table: 400 x 360 mm Operating pressure: 0.6 MPa Ejector travel: 63 mm Throat depth: 400 mm Total power requirement: approx. 20.0 kW Control cabinet dimensions (LxWxH): 1.2 x 0.65 x 2.1 m Machine dimensions approx. (LxWxH): 2.9 x 1.2 x 3.4 m - Two-hand operation - Control pedestal Accessories: - Base plate 2200 x 1500 x 40 mm

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 250028, galia: 250 kW (339,91 AG), slėgis (min.): 4 juosta, slėgis (maks.): 13,5 juosta, The pneumatic container is used to provide oil-free, dry compressed air for test facilities. TECHNICAL DETAILS Maximum air output: 42.83 m³/min Pressure range: 4 - 13.5 bar Oil-free compressed air capacity: 42 m³/min at max. 7.5 bar Drive Motor power: 250 kW System Configuration Compressor: EKO 250 D Refrigeration dryer: HHDp 4500 / HF 5-M/5 Activated carbon adsorber: BEKO Clearpoint L 3400 V After-filter: HF 6-60 Oil-water separator: BEKO Öwamat 16 Electronic condensate drain: BEKO 14 MACHINE DETAILS Compressor unit: 4,000 x 2,100 x 2,500 mm Hfjdpfx Asxf A Hzjcuon Overall dimensions (L x W x H): 13,000 x 2,950 x 2,900 mm Total weight: 20,000 kg

Sąlyga: geras (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 520 mm, tekėjimo skersmuo: 540 mm, veleno greitis (maks.): 10 000 aps./min, X ašies eiga: 550 mm, Y ašies eiga: 160 mm, Z ašies eigos atstumas: 1 595 mm, sukimosi greitis (maks.): 3 500 aps./min, įrankių magazino lizdų skaičius: 40, B ašies pasukimo kampas (min.): −120 °, B ašies pasukimo kampas (maks.): 120 °, TECHNICAL DETAILS CNC Control: Fanuc 18iT-B Turning length: 1,520 mm Swing diameter: Ø 540 mm Turning diameter over bed: Ø 750 mm Turning diameter over cross slide: Ø 600 mm Bar working capacity: 76 mm Turn-mill spindle Travel X-axis: 555 mm Travel Y-axis: ±80 mm (160 mm total) Travel Z-axis: 1,595 mm B-axis indexing: ±120° (240° total) Tooling system: Capto C6 Max. tool diameter (continuous): 90 mm Max. tool diameter (without adjacent tools): 120 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time (tool-to-tool): 1.5 s Number of tools in magazine: 40 Max. spindle speed: 10,000 rpm Milling spindle motor power (30 min / continuous operation): 15 / 11 kW Lower turret Travel X-axis: 185 mm Travel Z-axis: 1,640 mm Number of tool stations: 12 Max. speed driven tools: 4,000 rpm Main spindle Max. spindle speed: 3,500 rpm Chuck size: Ø250 mm Spindle nose: ASA A2-8 Spindle bore: Ø86 mm Draw tube bore: Ø77 mm C-axis – max. indexing angle: 0.001° Main spindle motor power (30 min / continuous operation): 26 / 22 kW Sub-spindle Max. spindle speed: 3,500 rpm Sub-spindle travel: 1,565 mm Axes travels and rapid traverse X1-axis travel: 555 mm X2-axis travel: 185 mm Z1-axis travel: 1,595 mm Z2-axis travel: 1,640 mm Y-axis travel: ±80 mm (160 mm total) A-axis travel: 1,565 mm C1, C2-axis travel: 360° (0.001° resolution) B-axis travel: ±120° (240° total) B-axis coupling angle: 15° X1, Z1, Z2 axes: 24 m/min Y-axis: 16 m/min A-axis: 24 m/min C1, C2 axes: 200 rpm B-axis: 27 rpm MACHINE DETAILS Hedpfx Aexf Hrnjcuefn Weight: 15.5 t Connected load: 93.92 kVA Dimensions: 5,550 x 2,560 x 2,645 mm EQUIPMENT - CNC Control Fanuc 18iT-B - Capto C6 tool system - Tool magazine with 40 stations - Lower turret with 12 tool stations

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, darbinis plotis: 2 500 mm, Parduodamos lankstymo staklės SCHECHTL MAX 250 (2020 m.) Būklė: labai gera, naudotos minimaliai. Įrenginys visiškai funkcionalus, tinkamas profesionaliam lakštinio metalo apdirbimui. Gamintojas: SCHECHTL Maschinenbau GmbH (Vokietija) Modelis: MAX 250 Tvirtos konstrukcijos, preciziškos ir patikimos motorizuotos lankstymo staklės, skirtos tiksliai lenkti įvairių rūšių metalo lakštus. Techniniai parametrai: Darbinis ilgis: 2500 mm Lenkimo storis (maks.): 2,0 mm Galinio atramos eiga: 750 mm (motorizuota) Valdymo sistema: yra (CNC/elektroninis valdymas) Lenkiamos sijos įrankiai: 10 mm ir 25 mm Pagaminimo metai: 2020 Jei turėsite daugiau klausimų, mielai atsakysime. Hjdpfx Acoxmfbwjuefn

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Katalogo numeris 7668 TECHNINIAI DUOMENYS - vikšro plotis 250 mm - veleno plotis 450 mm - maksimali disko skersmuo daugiapjūvei pjūklai 350 mm - maksimali disko skersmuo kraštų pjovimo pjūklui 350 mm - disko angos skersmuo 80 mm - maksimali pjovimo aukštis daugiapjūvei pjūklai 120 mm - maksimali pjovimo aukštis kraštų pjovimo pjūklui 100 mm - stalo plotis su tarpu 900 mm - stalo ilgis 1770 mm Hfodswrnxlopfx Acujn - iš viršaus: - atmušos - spaudimo, slanki metalo ritinėlis, lygus - atmušos - spaudimo, slanki ritinėlis - velenas su pjūklais - spaudimo, slanki metalo ritinėlis 2 vnt. - iš apačios: - kreipiamoji juosta - atmušos - vikšras - centrinis tepimas - nepertraukiamas padavimo greičio reguliavimas - padavimo variklis 1,1 kW - pagrindinis variklis 22 kW - bendri matmenys ilgis/plotis/aukštis 2200x1600x1800 mm – svoris 1900 kg – pagaminta Vokietijoje – velenas su plūduriuojančiu disku kraštų pjovimui – naudota daugiapjūvė, labai gera būklė Grynoji kaina: 54 900 PLN Grynoji kaina: 12 920 EUR pagal kursą 4,25 EUR (Kainos gali kisti priklausomai nuo didesnių valiutų svyravimų.)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 300 mm, Z ašies eigos atstumas: 700 mm, tekėjimo skersmuo: 140 mm, tekėjimo aukštis: 380 mm, tekinimo skersmuo virš slankiojančio stalo: 250 mm, TECHNICAL DETAILS Hedpfx Acsxf A Npouefn Turning diameter: 140 mm Swing diameter: 250 mm Turning height: 380 mm Travel Travel - X axis: 300 mm Travel - Z axis: 700 mm Spindle Spindle speeds: 1 - 6,000 rpm Drive power (40% duty cycle): 38.00 kW Spindle nose: DIN 55026 - Size 6 Spindle bearing diameter (front): 110 mm Feed & Rapid Traverse Feed rate X-axis: 1 - 30,000 mm/min Rapid traverse X-axis: 30.00 m/min Feed force X-axis: 9,000 N Feed rate Z-axis: 1 - 40,000 mm/min Rapid traverse Z-axis: 40.00 m/min Feed force Z-axis: 10,000 N Tools Number of tools in turret 1: 11 Number of tools in turret 2: 11 Tool holder: VDI 40 MACHINE DETAILS Control: SINUMERIK 840D Total power requirement: 70.00 kW Machine weight: approx. 22.00 t Space requirement: approx. 5.80 x 8.60 x H3.80 m EQUIPMENT Chip conveyor Extraction unit Infeed and outfeed Part turning gripper

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 185 mm, tekėjimo skersmuo: 640 mm, veleno greitis (maks.): 4 000 aps./min, tekinimo skersmuo virš slankiojančio stalo: 640 mm, priešvertenio sukimo momentas (maks.): 5 000 Nm, Turning and Milling Center with Main and Counter Spindle, Fully Equipped! TECHNICAL DETAILS Hsdpsxf A Edsfx Acusfn Turning Diameter: 640 mm Turning Length: 1,185 mm Swing Diameter: 640 mm Distance Between Spindle Heads: 1,500 mm CARRIAGE I X-Axis Travel: 550 mm Y-Axis Travel: 180 mm Z-Axis Travel: 1,185 mm B-Axis: 240° Feed Rate X-Axis: 0 - 40,000 mm/min Feed Rate Y-Axis: 1 - 24,000 mm/min Feed Rate Z-Axis: 1 - 70,000 mm/min Feed Rate B-Axis: 1 - 20 rpm Rapid Traverse X/Y/Z: 40 / 24 / 70 m/min Feed Force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool Holder: HSK 63 Milling Spindle Speed: 10 - 12,000 rpm Drive Power 100% Duty Cycle: 13.20 kW Drive Power 40% Duty Cycle: 22.00 kW Milling Spindle Torque: 60 / 100 Nm Max. Tool Length: 350 / 200 mm Tool Diameter: 80 mm Tool Diameter with 2 Free Slots: 120 mm Max. Tool Weight: 6 / 10 kg CARRIAGE II X-Axis Travel: 180 mm Z-Axis Travel: 1,050 mm Feed Rate X-Axis: 1 - 24,000 mm/min Feed Rate Z-Axis: 1 - 36,000 mm/min Rapid Traverse X + Z Axes: 24 / 36 m/min Feed Force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool Holder: DIN 69880 Ø40 Driven Tools - Number: 12 Speed: 1 - 4,000 rpm Drive Power 100% Duty Cycle: 10.70 kW Torque S1: 32 Nm CARRIAGE III Z-Axis Travel: 1,150 mm Feed Rate Z-Axis: 1 - 36,000 mm/min Rapid Traverse Z-Axis: 36 m/min Feed Force Z-Axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 - 4,000 rpm Drive Power 100% Duty Cycle: 36.00 kW Drive Power 40% Duty Cycle: 45.00 kW Torque at 40% / 100% Duty Cycle: 800 / 630 Nm Spindle Bore: 80 mm COUNTER SPINDLE Speed: 10 - 5,000 rpm Drive Power 100% Duty Cycle: 21.00 kW Drive Power 40% Duty Cycle: 28.00 kW Torque at 40% / 100% Duty Cycle: 320 / 240 Nm Spindle Bore: 80 mm MACHINE DETAILS Electrical Data Total Connected Load: 70.00 kW Dimensions & Weight Machine Weight: approx. 20.00 t Space Requirement: approx. 8.50 x 4.50 x H3.10 m Control Control Manufacturer: Siemens Control Model: SINUMERIK 840D EQUIPMENT Chip Conveyor Oil Mist Separator DMG Automation WH10top Main Spindle ISM90: Hollow Clamping Device, C-Axis, 3-Jaw Power Chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter Spindle ISM76: Partial Hollow Clamping Device, C-Axis, 3-Jaw Power Chuck SMW-AUTOBLOK KNCS-NB-315-91 Workpiece Handling Unit with Integrated Conveyor Belt Automatic Safety Cover Differential Pressure Clamping With Coolant Pump Skid: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch Collet Chuck incl. collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 piece part extractor for turret

Sąlyga: geras (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 101331, X ašies eiga: 300 mm, Z ašies eigos atstumas: 700 mm, veleno greitis (maks.): 5 000 aps./min, tekėjimo skersmuo: 140 mm, tekėjimo ilgis: 630 mm, TECHNICAL DETAILS Maximum turning diameter: 140 mm Swing diameter over chuck: Ø 250 mm Turning height: 630 mm Control: SIN840 PL Spindle Spindle speeds: stepless, 1 - 5,000 rpm Drive power (40% duty cycle): 38.00 kW Spindle nose: according to DIN 55026 - Size 6 Spindle bore diameter at front bearing: 110 mm Axes X-axis travel: 300 mm X-axis feed rate: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis travel: 700 mm Z-axis feed rate: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Z-axis feed force: 10,000 N Turret Number of tools in turret 1: 12 Hfedpfxsxf An Ss Acujn Number of tools in turret 2: 12 Tool holder: VDI 40 DIN 69880 MACHINE DETAILS Total power requirement: 70 kW Machine weight: approx. 25 t Space requirement (L x W x H): approx. 6.8 m x 4.7 m x 4.3 m EQUIPMENT - Chip conveyor - Spindle cooling unit HYFRA - Coolant system Knoll