Žymiklio Valdymo Įrenginys pirkti naudotą (32 936)

Sąlyga: naudotas, Gamybos metai: 2016, Overview This weighing and packaging line was built in 2016 by the Spanish manufacturer Volpak. The system is fully equipped, in very good technical condition, and shows only minimal signs of use. The plant is still installed and connected, and can therefore be inspected in person at any time. Technical Data - Capacity: 60 bags/minute - Doypack/flat pouch formats: 20/25g, 50g, 300g, 500g, 750g Pedpfx Aotz H T Deh Hopl - Capability for micro-dosing of powders - Modern wide zipper/belt Scope of Delivery - Doypack packaging machine | Volpak | SI-280 F1 - Multihead weigher | Ishida | CCW-RV-228-S/05-SS - 4 raw material discharge stations - Lindor mixer - Cox & Plant dosing system between discharge stations, mixer, and multihead weigher - Ishida x-ray inspection system with reject, IX-GA-4075 - Ishida dynamic checkweigher with DACS-G-S0 reject - System for the injection of nitrogen or another inert gas, including a metering system - Dust extraction system - Euro hole punch - Smooth sealing system

Sąlyga: naudotas, Gamybos metai: 1996, Overview  This bottle cleaning machine was manufactured in 1995 by the Swiss producer PAC. The machine is still in operation and can be inspected in person. Technical Details Capacity: 10,000 bottles/h Min/Max: 5,000 bottles/h - 13,000 bottles/h Bottle types: 0.5L, Euro, NRW Bottles per row: 10 Bottles in the machine: 1,980 Bottle carrier plates: 204 Dimensions:  Length: 8,100 mm Width: 1,395 mm Height: 2,300 mm (without feet) Weight: approx. 9,210 kg Water consumption: 4.0 - 4.8 m³/h Thermal consumption at 80°C: 700 - 840 kJ/h x 1000 Electrical consumption: 17 kW Including Spare parts Motors for rear and front drive Bottle carrier plates Wear parts Pedpfx Ahsu H R Nnj Hopl

Sąlyga: naudotas, Gamybos metai: 2017, Overview This automatic case packer was built in 2017 by the German manufacturer Krones. The machine is in very good condition, still installed, and can be inspected in person at any time. Technical details Output 28,800 bottles per hour 1,200 cases per hour Recently processed parameters Bottle dimensions 500ml Outer diameter: 65.50 mm Overall height: 206.30 mm Case configuration 6x4 Length: 400 mm Width: 300 mm Height: 255 mm Case infeed direction: transverse Electrical connection: 400/230V, 50Hz, 15A Podpfx Ahjt Rbzns Hepl

Sąlyga: naudotas, Gamybos metai: 2012, Overview The Linapac II unpacker and packer was built in 2012 by the German manufacturer Krones. The column was replaced by a new one in April 2021. Technical details Formats: 3x4 (0.75 l – 1.00 l), 4x5 (0.5 l) 6x12 gripper heads Automatic format changeover Ppedpfx Aju Huykjh Hol

Sąlyga: naudotas, Gamybos metai: 2002, Overview Ppjdpfx Ahopb U Iue Hjl The labeling machine was manufactured in 2002 by the Italian producer Cavagnino e Gatti. This machine applies self-adhesive labels to glass bottles. The labels are supplied from a roll, allowing for flexible label dimensions. Technical Details - Capacity: 7,000 bottles/hour - Suitable for glass bottles - Most recently used formats: 0.375L to 1.0L glass bottles; 200 mL PET bottles - 3 self-adhesive labeling stations - Electrical power consumption: 3.5 kW - Compressed air: 25 l/min, 5 bar

Sąlyga: naudotas, Gamybos metai: 2016, Overview This fully automatic glass jar packaging line was built in 2016 by Buhmann pac solutions System GmbH and has seen very little use, with only approx. 5,000 operating hours (of which around 2,000 hours were in actual production). The line includes a case erector (wrap-around trays) as well as a packing unit, and in addition to packing homogeneous product cases, it also allows for automatic offline product addition (mixed cases). The system has been regularly serviced by Buhmann & Yaskawa, with approximately €200,000 invested in maintenance and servicing between 2020–2024. The system is in excellent condition and immediately available. Technical Details Product infeed capacity online: max. 280 jars/minute Format 3: max. 220 jars/minute Addition type A: max. 140 jars/minute (11.5 cases/minute) Addition type B: max. 140 jars/minute (11.5 cases/minute) Total output: max. 350 jars/minute or 30 cases/minute Case erector & lidder: 23.5 cases/minute Changeover time (format change): approx. 15 minutes Formats / Packaging specifications Format 1: 12-unit tray, 2 layers, 350 g jars Format 2: 6-unit tray, 2 layers, 720 g jars Format 3: 6-unit tray, 2 layers, 580 g jars Format 4: 6-unit tray, 2 layers, 1,000 g jars Format 5 (mixed formation): Combination of various jars, automatic addition via separate conveyors Operating hours: approx. 5,000 (of which approx. 2,000 pure production) Utilities Electrical: 3x 400 V / N / PE, 50 Hz Pneumatics: min. 6 bar – max. 12 bar, oil-free, residual oil content max. 0.1 mg/m³ (ISO 8573-1 Class 2) System components Buhmann case erector C300 (wrap-around trays) Buhmann packing unit PF800 Yaskawa robot with gripper units 2x Nordson PROBlue 4 glue units Separate infeed conveyor for offline products (mixed cases) Lidder unit for cases Pjdpfx Asyb Snbsh Hspl

Sąlyga: naudotas, Gamybos metai: 2014, Apžvalga (H2) Ši KEG plovimo mašina buvo įsigyta 2014 metais ir pagaminta „M+F Keg-Technik“ (Vokietija). Įrengimas parduodamas, nes jo daugiau nebereikia. 2025 m. birželį buvo sumontuotas naujas siurblys. Mašina iškart prieinama. Techniniai duomenys Našumas: apie 10–15 KEG/val. (programos trukmė: 360 sek. / 272 sek. / 240 sek.) Matmenys: Plotis: apie 380 mm Ilgis: apie 850 mm Aukštis: apie 1 000 ± 50 mm Pedpeyb Tgljfx Ah Hopl Talpa: apie 50 l Šildymas: Įtampa: 400 V, 50 Hz Galia: 3 kW Siurblys: Įtampa: 400 V, 50 Hz, IP 54 Galia: 0,55 kW Našumas: 4 000 l/h, 2,0 bar Naujas siurblys sumontuotas 2025 m. birželį Programa: be garo apdorojimo programa Ciklo trukmė priklauso nuo našumo (10–15 KEG/val.)

Sąlyga: naudotas, Gamybos metai: 1998, Overview This filling and capping monoblock was manufactured in 1998 by the Spanish company Irundín. The IRUNDÍN MONOBLOC 12x4 was specifically designed for large-format PET bottles (8-liter containers) and combines filling and capping in a single unit. The machine is in regular production with preventive and corrective maintenance and will remain in operation until the end of 2025. Therefore, it will be available from 2026 onwards. Technical Data - Capacity: 1,200 bottles/hour - Formats: 8L PET carboys (not height-adjustable, not compatible with other sizes unless modified) Ppodpfx Ajw T Tdbsh Hjl - Filling valves: 12 - Capping heads: 4 - Type: Atmospheric - Construction: Stainless steel frame, transparent methacrylate safety guards, manual maintenance access - Infeed and outfeed tables: Not included - Format parts: Only for 8L format Technical Notes: - Height adjustment system deactivated (can be reactivated with modification) - No vacuum circuit or back pressure regulator (BPR) included - Axial lift mechanism deactivated

Sąlyga: naudotas, Gamybos metai: 2020, Apžvalga Šis pusiau automatinis KEG indų ploviklis buvo pagamintas 2020 m. Italijos įmonėje SIFA. Idrokeg 21 turi du plovimo galvutes ir yra skirtas efektyviam garu šildomų KEG indų valymui. Su iki 12 KEG talpa per valandą, įrenginys tinka mažoms ir vidutinėms alaus darykloms. Įrenginys yra labai geros būklės, paruoštas naudojimui ir pristatomas su specialiais rezervuarais, siurbliais ir valymo įranga. Techniniai duomenys Pajėgumas: 12 KEG/val. Valymo stotys: 2 Šildymas: garas Formatai: S tipo KEG'ai Ppedjxcul Dopfx Ah Hjl

Sąlyga: naudotas, Gamybos metai: 2012, Apžvalga: Šis dėžių pakavimo įrenginys (traypacker) pagamintas 2012 m. Vokietijos gamintojo MEYPACK. Jis jau yra demontuotas ir saugomas BEVMAQ sandėliuose. Konvejerio sistema nepridedama, tačiau įrenginio įėjimo mazgas ir padėklų žurnalas yra įtraukti. Techniniai duomenys: Tipas: VP500 Pagaminimo metai: 2012 Bendra našumas: 20 taktų/min Ilgis: 8000 mm | Plotis: 1600 mm | Įėjimo ir išėjimo aukštis: 1250 mm Pakuočių matmenys: Ilgis: 100–300 mm Plotis: 200–450 mm Aukštis: 60–350 mm Padėklo krašto aukštis: 40–100 mm Iškirptas ruošinys: Ilgis: 200–500 mm Plotis: 290–600 mm Galia: 400V,N,PE | 10kW/33A | Suslėgtas oras: 6–7 bar | 20 NL/ciklas Ppedpfxoyb Sqve Ah Hsl

Sąlyga: naudotas, Gamybos metai: 1993, Apžvalga Šis išpakavimo įrenginys buvo pagamintas 1993 m. Vokietijos įmonės Otto Fleischer. Modelis Rota/1/A yra viengalvė išpakavimo mašina. Ji vis dar sumontuota ir gali būti nedelsiant pristatyta. Techniniai duomenys Apdorojamų butelių formatai: 0,7 l (GDB) ir kiti Vienos galvos veikimas 90° įėjimas-išėjimas Konstruktas Darbinis slėgis: apie 6 bar Elektros prijungimas: 380 V / 50 Hz / N / PE Galia: apie 4 kW Valdymo įtampa: 24 V Ppedpfx Aheyb Srge Hjl

Sąlyga: naudotas, Gamybos metai: 2001, Overview This flash pasteurizer was manufactured in 2001 by the German companies Krones / APV. The unit was previously operated in a mineral water production facility in Germany. After the complete plant was replaced, the machine was dismantled and sold separately. It is immediately available and currently in stock. The reason for the sale is a plant modernization. Technical data Application: Non-alcoholic beverages / mineral water Capacity: Guaranteed throughput up to 22,000 l/h, adjustable down to 10,000 l/h Process design: Plate heat exchanger with regeneration, heating, degassing, and cooling stages Ppsdpoyb Sw Aefx Ah Hol Integrated degassing unit Buffer tank with internal circulation Electrical connection: 230 / 400 V, 3 Ph, 50 Hz Control voltage: 24 V DC Construction: Stainless steel design CE-compliant according to EU Machinery Directive Control & Instrumentation: Measuring and control technology, PLC-based control system, control cabinet Interfaces: Mechanical and electrical interfaces according to Krones / APV standards

Sąlyga: naudotas, Gamybos metai: 2016, Overview The packer was manufactured in 2016 by the former German company Federspiel. It is located in a large German mineral water bottling plant and is no longer in operation. The packer was decommissioned at the time because it no longer met the performance requirements. Technical details Capacity: 3,800 crates/h (with 0.7 l bottles) Formats: 0.25 l; 0.5 l; 0.7 l; 1.0 l Control unit: Siemens S7 Multi-gripper head with 2x12x8 grippers Bottle table Bottle alignment block Podjl Hx E Sspfx Ah Hopl

Sąlyga: naudotas, High-lift order picker Manufacturer: OM Model: XOP2I Year of manufacture: 2009 Drive control: MOSFET55re Operating hours approx.: 1,300 Drive: Electric Operation: Stand-on Load capacity: 1,100 kg Load center (c): 400/600 mm Load distance (x): 303 mm Wheelbase (y): 1,447 mm Own weight (incl. battery): 2,850 kg Axle load with load, drive/load side: 900/3,050 kg Axle load without load, drive/load side: 1,550/1,300 kg Mast height retracted: 2,270 mm Lift height: 3,180 mm Mast height extended: 5,520 mm Height over protective roof (cab): 2,340 mm Standing height: 240 mm Additional lift: 740 mm Standing height raised: 3,420 mm Podpfx Ahswp Ebfs Hjpl Lowered height: 65 mm Total length: 3,187 mm Length including fork back: 1,987 mm Overall chassis width: 880/900 mm Fork dimension: 60/120/1,200 Fork carriage DIN 15173, Type A,B: welded Fork width: 660 mm Fork outside distance: 560 mm Width over guide rollers: 910 mm Ground clearance with load under mast: 60 mm Ground clearance mid-wheelbase: 50 mm Working aisle width with pallet 800 x 1,200 transverse/longitudinal (Ast): 1,010 mm Turning radius: 1,685 mm Transfer aisle width with load transverse/longitudinal: 3,450 mm Service brake: regenerative Travel motor, output at S2=60min.: 3.4 kW Lift motor, output at S3=15%: 7.0 kW Battery according to DIN 43531/35/36: DIN 43531 A Battery weight: 720 kg

Sąlyga: geras (naudotas), Gamybos metai: 2018, Drill-Plasma Cutting Center Plate Processing Center Manufacturer: Vernet-Behringer Model: MAG EVO 420 Year of manufacture: 2018 CNC control Power source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Automatic tool turret Tool magazine capacity: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring (marking): 5 to 40 mm Minimum plate dimensions: 1,500 x 300 mm (750 x 400 mm with restrictions) Ppodpfx Ahjvzrczo Hel Minimum finished part dimensions: 80 x 80 mm Maximum plate weight: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel and plates: 4,000 x 2,000 mm Zero point cross conveyor Number of grippers: 2 NC feed carriage, side-mounted 4 clamping grippers (2+2) 3 short-stroke cross conveyors Working height: 1,000 mm Outfeed side: Outfeed roller conveyor with lowering discharge table and chute into material collection container for unloading small parts. Filter unit including piping High performance, suitable for use with carbide tools. For drilling, tapping, marking, milling, plasma cutting of flat steel and plates. Software options for milling and scribing LANTEK license ä21126 Availability: immediately!

Sąlyga: geras (naudotas), Keyboard, control panel, industrial, PLC workstation, programming device -Manufacturer: Siemens, programming device Simatic PG 605 with case -Type: Simatic PG 605U 6ES5 605-0UA12 -Case dimensions: 390/300/H90 mm Ppedpfjhyx Rkex Ah Hjl -Total weight: 1.7 kg

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, BINKS MX 30/70 – Oro varoma airless / oro pagalbinis pramoninis siurblys BINKS MX 30/70 yra pažangus oru varomas pramoninis siurblys iš Binks MX serijos, sukurtas intensyviam paviršiaus padengimui. Šis siurblys naudoja patentuotą magnetinę vožtuvo technologiją, užtikrinančią greitą perjungimą ir labai mažą pulsavimą, kad būtų pasiektas tolygus medžiagos srautas bei aukšta apdailos kokybė. Keramika dengta stūmoklio strypas užtikrina ypatingą atsparumą dilimui ir iki 3 kartų ilgesnį eksploatacijos laiką dirbant su abrazyvinėmis medžiagomis. Ypatybės: Spaudimo santykis: 30/70 Labai mažas pulsavimas Oru varoma, tvirta konstrukcija Ilgas tarnavimo laikas ir minimalios prastovos Pritaikymas: Korozijos prevencija, plieninės konstrukcijos, vamzdžiai ir talpyklos, laivybos pramonė, transporto priemonių ir važiuoklių gamyba. Ppodpfjyfuciex Ah Hsl Tinka tiek tirpikliu, tiek vandeniu pagrįstiems dangoms, epoksidams, poliuretanams ir cinko turtingiems gruntams.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, BANDO Buffalo 45:1 lako siurblys – nerūdijančio plieno versija BANDO Buffalo 45:1 yra galingas ir patikimas lako siurblys iš nerūdijančio plieno, sukurtas profesionaliems pramoniniams tikslams. Siurblys tinka lakų, dažų, dangų ir kitų didelio klampumo medžiagų tiekimui, kai būtinas pastovus slėgis ir tolygus srautas. Nerūdijančio plieno konstrukcija užtikrina didelį atsparumą dilimui ir korozijai, todėl prailgina tarnavimo laiką ir sumažina priežiūros išlaidas net ir sudėtingoje gamybos aplinkoje. Savybės ir privalumai: 45:1 slėgio santykis – galingas ir efektyvus medžiagų tiekimas Nerūdijančio plieno konstrukcija – ideali lakams ir agresyvioms medžiagoms Stabilus ir tolygus veikimas Pedoyft U Rjpfx Ah Hopl Tinka profesionalioms purškimo ir dengimo sistemoms BANDO Buffalo 45:1 yra puikus pasirinkimas įmonėms, kurios kelia aukštus reikalavimus kokybei, patvarumui ir patikimam veikimui.

Sąlyga: geras (naudotas), Gamybos metai: 2015, Heidenhain TNC 128 CNC milling control, year 2015, in good condition with handwheel. Podpfx Ahowr Da Ss Hspl

Gamybos metai: 2018, Sąlyga: labai geros būklės (naudotas), Julabo Type: FLW7006 Julabo FLW7006 Recirculating Chiller / Cooling Unit 400V Excellent condition / Year of manufacture: 2018 For sale is a Julabo FLW7006 recirculating chiller, a powerful industrial cooling unit suitable for laboratory, test, and production applications. The Julabo FLW7006 is a water-cooled recirculating chiller. The unit comes from professional use, has been properly serviced and tested, and is in very good, clean condition. All functions are fully operational, the display and controls work flawlessly. Typical applications: - Machine and process cooling - Laboratory and testing technology Ppedpfxeyfndge Ah Hjl - Plastic, laser, or equipment cooling Highlights: - Robust industrial design - Digital temperature display - External control (RS232) - Alarm connection - Castors for easy transport Technical data: Manufacturer: Julabo GmbH Model: FLW7006 Serial number: SN 10339349 Year of manufacture: 2018 (according to name plate) Refrigeration technology: Refrigerant: R452A Filling quantity: 1,625 g Operating pressure: max. 24 bar CO₂ equivalent: 3.48 t GWP: 2140 Temperature & performance data (manufacturer specifications): Temperature range: –20 °C to +40 °C Temperature stability: ± 0.5 °C Cooling capacity (typical, depending on application conditions): - approx. 1.3 kW at –20 °C - approx. 5.5 kW at 0 °C - approx. 7.4 kW at +20 °C Connections & Equipment: - Supply and return (industrial fittings) - Pressure gauge - Shut-off valve - RS232 interface - Alarm contact (max. 30 V / 1 A) - Castor chassis Electrical Data: Power supply: 400 V AC Frequency: 50 Hz Connection: 3P + N + PE Rated current: 14 A Protection class: IP21 Dimensions & weight (approx.): Dimensions (H × W × D): approx. 1050 × 550 × 750 mm Weight: approx. 150–170 kg Shipping & Delivery: Condition: used Scope of delivery: - Julabo FLW7006 recirculating chiller - Power cable Shipping method: Freight shipment on pallet (by arrangement, shipping costs depending on destination) Collection: possible by appointment. (Subject to technical changes and errors in the specifications!) If you have further questions, we would be happy to answer them for you by phone.

Sąlyga: geras (naudotas), 144 NAUDOTA tešlos voluotė, apvalinimo, ilginimo, bagetų gaminimo įrenginys Seewer Rondo. IŠORINIAI MATMENYS (cm): - aukštis: 170, - plotis: 115, - ilgis: 215, - sparnas 1x: 108/62, - sparnas 1x: 75/62, - sparnas 1x: 114/62. Įrenginį galima apžiūrėti mūsų sandėlyje (36-068 Bachórz, Lenkija). Galimos mokamos parinktys: kapitalinis remontas / transportavimas / montavimas / paleidimas. Nurodyta kaina yra be PVM. KALBAME ANGLIŠKAI, VOKIŠKAI, PRANCŪZIŠKAI, RUSIŠKAI, UKRAINIETIŠKAI. Ppedpfoxdkbqex Ah Hol

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2018, veikimo valandos: 3 317 h, bendras svoris: 19 000 kg, galia: 389,81 kW (529,99 AG), Mobile Shredding Plant DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Mobile up to 80 km/h Fine shredding basket (perforation as agreed) Rear discharge conveyor with magnetic roller Ppjdpot Egddefx Ah Hol Twin drive (separate drives for feed floor and intake roller) Hydraulic drive (crawl gear) Radio remote control

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, bendras svoris: 22 000 kg, galia: 375,1 kW (509,99 AG), paskutinio kapitalinio remonto metai: 2024, Mobile shredder DOPPSTADT AK 535 compact. Diesel engine: 510 HP Screen basket: perforation as per agreement Ppodpfsrrg Ifjx Ah Hsl Rear discharge conveyor Overband magnet Central lubrication Twin drive = separate drive for feed roller and scraper floor Hydraulic travel drive (creep speed) Radio remote control Financing options available upon request.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, galia: 389,81 kW (529,99 AG), Mobilioji smulkinimo įranga DOPPSTADT AK 560 Eco Power Dyzelinis variklis: 530 AG Smulkaus smulkinimo krepšys (skylės pagal susitarimą) Galinė iškrovimo juosta su magnetiniu būgnu Twin drive (atskirai varomi grandiklio dugnui ir padavimo voleliui) Hidraulinė pavara (šliaužimo režimas) Pjdpfxew Rz Rqj Ah Hjpl Nuotolinio valdymo pultas

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Diesel engine: 430 HP Podjh Ngukepfx Ah Hspl Rear discharge conveyor, overband magnet, radio remote control Financing can be offered if required.