Šlifavimo Kalibravimo Staklės pirkti naudotą (48 413)

Būklė: naudotas, Gamybos metai: 1977, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workhead swivelling: 360° Grinding head swivelling: 180° ± Grinding spindle speeds: 1,500 / 1,700 / 2,200 rpm Infeed incrementally: 0.001–0.030 mm/Ø Infeed continuously: 0–0.95 mm/Ø Table swivel: ±8° Table longitudinal travel: 1,300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 × 2.0 m Originally supplied new to university. Taken over in 2018. Then fully serviced at BEMA and delivered to a single-operator workshop. The machine will now be serviced again and the table geometry remachined. 2-axis Fagor digital readout retrofitted. – Tailstock with fine adjustment – Internal grinding device – Coolant system Nodpsynmpgsfx Ahcewl Additional accessories available on request.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga yra geros techninės būklės, iš anksto susitarus galima ją išbandyti. 2 VIENETAI. Nsdpfxsz A Ucao Ahcewl

Būklė: naudotas, bendras plotis: 2 300 mm, bendras ilgis: 3 500 mm, bendras aukštis: 3 100 mm, Spalva: žalia Svoris be apkrovos: 6000 kg Nwjdozwvwdspfx Ahcel – Dokumentacija: nėra – CE sertifikatas: nėra – Valdymas: tradicinis – X ašies eiga [mm]: 2000 – Z ašies eiga [mm]: 400 – Stalo plotis [mm]: 1600 – Stalo gylis [mm]: 300 – Magneto plotis [mm]: 600 – Magneto gylis [mm]: 200 – Didžiausias šlifavimo disko skersmuo [mm]: 355 – Papildomos funkcijos: peilių galandimo įrankis – Transportavimo matmenys: 3500 mm x 2300 mm x 3100 mm (ilgis x plotis x aukštis) – Transportavimo svoris [kg]: 6000 kg Finansinė informacija PVM: nurodyta kaina yra be PVM PVM/skirtuminis apmokestinimas: PVM gali būti atskaitoma įmonėms Pristatymas ir senos įrangos priėmimas galimas bet kuriuo metu, visoms pramoninėms prekėms Lukas van Rossum

Gamybos metai: 2011, būklė: naudotas, Šlifavimo disko skersmuo: 600 mm, šlifavimo aukštis: 400 mm, didžiausia stalo apkrova: 500 kg, ilgis: 2540 mm, plotis: 2130 mm, aukštis: 2350 mm, svoris: 5,2 t, komplekte: naudojimo instrukcija, montavimo instrukcijos ir vadovas. Speciali šlifavimo programa – galinių paviršių šlifavimas. 1 vnt. standartinis šlifavimo disko laikiklis, skirtas diskams su 25–100 mm skersmens skylėmis (skylės skersmuo Ø127 mm), įrankiai (1 vnt. veržliaraktis, 1 vnt. atraminis varžtas). Galima apžiūra vietoje. Njdpfxez Da Nne Ahcewl

Būklė: naujas, Gamybos metai: 2022, Variklis 2,2 kW (3 AG), šlifavimo juosta 2280 x 150 mm, pasukamas kraštų šlifavimo agregatas, variklinė juostos vibracija, atraminis stalas prie nukreipiamojo volelio, pneumatinė juostos įtempimo sistema, stalo matmenys 700 x 350 mm, darbinis paviršius 1000 x 150 mm, juostos greitis 22 m/s, Nwsdpfx Aoffyc Nehcel volelio skersmuo 140 / 80 mm, siurbimo antgalis D = 100 mm. Pristatoma iš sandėlio, Seevetal, pardavimas gali būti atliktas bet kuriuo metu.

Gamybos metai: 1994, būklė: naudotas, Workpiece diameter: 350 mm Workpiece weight: 99,999 kg Workpiece height: 240 mm Total power requirement: 7.5 kW Machine weight approx.: 2 t Rare opportunity: Partially overhauled high-precision rotary table surface grinding machine With completely new control cabinet and new control system featuring BEMA grinding software Rotary table diameter: 380 mm Magnet diameter: 350 mm Grinding wheel dimensions: 300 x 25 x 76.2 mm Table speed, variable up to: 200 rpm Table swivel angle: ±3 degrees Grinding spindle speed: 800–4200 rpm Grinding spindle drive power: 5 kW Maximum cross travel: 225 mm Maximum vertical travel: 480 mm Maximum distance between magnetic chuck and spindle center: 390 mm Automatic head dresser AF65: For cylindrical dressing of the grinding wheel using the CD dressing method (dressing during the grinding process) This reduces grinding times and saves dressing cycles. The dressing allowance is automatically compensated. Automatic touch-off device AT-R: Enables quick and automatic approach of the grinding wheel to the workpiece. CNC control with maximum programming convenience Various grinding programs for: - Reciprocating grinding - Short-stroke grinding - Plunge-cut grinding - For one or several surfaces at the same or different heights Nwsdpfoxbtl Tjx Ahcjl Dress cycles integrated into the grinding program - Table dressing with single diamond - Automatic straight dressing - CD dressing with AF65 Mini-cycles: - Automatic referencing (touch-off) to the workpiece - Positioning of individual axes - Dressing Field of application: Highly precise surface grinding operations in medium and large series production or individual part manufacturing with centric clamping Data subject to change / without guarantee

Būklė: naudotas, Gamybos metai: 2017, - 4 juostiniai šlifavimo agregatai - Dažnio reguliavimas visiems agregatams - Elektroninis šlifavimo slėgio reguliavimas Universalus kraštų ir profilių šlifavimo staklės Gamintojas: Heesemann Modelis: UKP 20 Pagaminimo metai: 2017 Techniniai duomenys Detalės transportavimo sistema - Bendras ilgis: 5015 mm - Varoma 1,5 kW trifazio elektros varikliu su dviguba grandine, skirtą detalėms transportuoti - Pašaravimo greitis, reguliuojamas dažniu, diapazone 5–25 m/min. - Darbinis aukštis: pastovus – 880 mm - Įskaitant integruotus valdymo spinteles - Įskaitant reguliuojamą atraminę liniuotę su skaitmeniniu ekranu ir atitinkamą priešinę liniuotę su centrine pločio reguliavimu 4 šoniniai kreipiamieji ritinėliai tarp šlifavimo agregatų, užtikrinant saugų batutų transportavimą Pramoninis kompiuteris 10,4" - LCD-TFT spalvotas ekranas - Jutiklinio ekrano versija - Su ekranu, rodančiu gamybos ir pertraukų laiką - Su programų atmintimi, talpinančia 100 programų 2 juostiniai šlifavimo agregatai „M 4“, Nr. 1 ir 2 - Skirti tiesiems kraštams šlifuoti - Juostos matmenys: 2300 x 80 mm - Šlifavimo juostos greitis: 0,7–12 m/s - Variklio galia: 3,0 kW - Elektroninis dažnio reguliavimas leidžia be pakopų reguliuoti šlifavimo juostos greitį - Elektroninis šlifavimo slėgio reguliavimas iš valdymo pulto 2 osciliaciniai įrenginiai, skirti „M4“ (Nr. 1 + 2) Užtikrina visišką šlifavimo juostos išnaudojimą 2 juostiniai šlifavimo agregatai „K 4“, Nr. 3 ir 4 Nedezuzb Aopfx Ahcjwl - Skirti mažiems profilių fragmentams šlifuoti - Taip pat gali būti naudojami kraštams apvalinti - Pasukami 90 laipsnių į viršų ir 45 laipsnius į apačią - Juostos įtempimo jungiklis - Įrankių laikiklis su greito keitimo įtaisu - Periodinis juostos atpalaidavimo įtaisas - Juostos matmenys: 2000 x 50 mm - Šlifavimo juostos greitis: 0,5–8 m/s - Variklio galia: 1,1 kW - Elektroninis dažnio reguliavimas leidžia be pakopų reguliuoti šlifavimo juostos greitį - Elektroninis šlifavimo slėgio reguliavimas iš valdymo pulto 4 elektroninės valdymo sistemos - Skirtos visiškai automatiniam šlifavimo įrankio pakėlimui ir nuleidimui, priklausomai nuo nustatyto pašaravimo greičio, šlifavimo slėgio ir agregato kampo Pastaba: Techniniai duomenys ir aprašymai yra kopijos iš tuometinio užsakymo patvirtinimo. Informacija pateikiama tik informaciniu tikslu ir nėra privaloma.

Būklė: naudotas, Gamybos metai: 1989, Juostinis šlifavimo įrenginys Gamintojas: MAFAC / Schwarz Maschinenfabrik Modelis: NT 200 H Pagaminimo metai: 1989 Nwedpfx Asz Df E Ushcel Pneumatinė juostos įtempimo sistema 21926

Būklė: geras (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, 1 naudota „Iseli“ flanšų šlifavimo staklė EBW -E. Nwedpfx Ahezz Rhljcsl

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swiveling: ±8° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Cross travel max.: 270 mm Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mounting: 80 mm Tailstock quill mounting: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a delivered machine. - Very simple operation via touch panel. - Symbol layout on control panel almost identical to original control, so no retraining necessary. - Diagnostic function with display of PLC messages and digital I/Os - Dressing function can be modified or expanded as per customer request. - Oriented spindle stop for the workpiece spindle available on request. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital readout in 2 axes. X-axis resolution: 0.5 micron Options: - Encoder with digital display in the workpiece spindle headstock - Encoder with digital display in the grinding spindle headstock (height adjustment with spindle not possible) - New, robust internal grinding attachment, 80 mm or 100 mm diameter - Increased centre height up to max. 225 mm - Grinding spindle speed control Included: - Operating tools - Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic table longitudinal and rapid traverse movement. Versatile use in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single clamping for individual parts. Possible options: Nodpfeuxfupjx Ahcswl - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control The machine tool currently does not comply with the basic safety and protection requirements as stated in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives.

Būklė: naudotas, Gamybos metai: 2007, Plataus paviršiaus šlifavimo staklės Gamintojas: Bütfering Modelis: Optimat SCO 313QHQ Pagaminimo metai: 2007 Techniniai duomenys Apdirbimo galvutės: 3 Apdirbimo plotis: 1100–1350 mm Apdirbimo aukštis: 900 mm Detalės storis: 3–160 mm Šlifavimo juostos plotis: 1120–1370 mm Šlifavimo juostos ilgis: 2150–2620 mm Tinklo slėgis: maks. 8 bar Darbinis slėgis: 6 bar Pastaba: Nwodpfx Ahez A S Nkecel Techniniai duomenys ir aprašymai yra tuometinio užsakymo patvirtinimo kopijos. Duomenys pateikiami tik informaciniu tikslu ir nėra įpareigojančios.

Gamybos metai: 2013, būklė: naudotas, Šlifavimo agregatų skaičius: 4 vnt. Didžiausias šlifavimo plotis: 200 mm Didžiausias šlifavimo aukštis: 7–150 mm Padavimo greitis: 8–16 m/min Šlifavimo juostos greitis: 18–30 m/s Stähle-Hess šlifavimo staklės Saturn-Duo ----- Techninis gamintojo aprašymas: Stähle Hess apdailos šlifavimo staklės Saturn Duo turi 2 šlifavimo agregatus, papildomai viršuje ir apačioje – Roto Finish šlifavimo įrenginiai. 1 viršutinė šlifavimo juosta 1 apatinė šlifavimo juosta 2 viršutiniai Roto-Finish šlifavimo įrenginiai 2 apatiniai Roto-Finish šlifavimo įrenginiai Apdirbamo ruošinio matmenys: Aukštis: 7–150 mm Plotis: iki 200 mm Minimalus ilgis: 300 mm Juostos greitis: 18–30 m/s (kintamas) Padavimas: 8–16 m/min (kintamas) ----- Nwjdsy Spvlepfx Ahcjl Nurodytos staklės kaina – pagal užklausimą! ----- Info: Staklės buvo naudojamos kartu su Weinig Variomat keturpusėmis obliavimo staklėmis, sandėlio Nr. #7007 (techniniai duomenys pagal gamintoją – be garantijos!) Visos kainos nurodytos be PVM. Pridedamas galiojantis PVM.

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Plunge feed per stroke: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg including clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m As a worldwide leading company in the field of Kellenberger overhaul/retrofit, we are not only able to deliver these machines in like-new condition with warranty, but also provide service for your machines. Machine geometry overhauled and newly painted, with original electrics. Photo shows a recently delivered 600U. - Digital readout in 2 axes, x-axis resolution 0.5 μm Options: - Rotary encoder with digital readout in the workpiece spindle headstock - Rotary encoder with digital readout in the grinding spindle headstock (no height adjustment possible with spindle) - New stable internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Centre height can be increased up to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Nwodpfst Ii Nuox Ahcel Further accessories available on request. At present, the machine tool does not comply with the essential safety and protection requirements as stipulated in the German Industrial Safety Ordinance (BetrSichV 2015). Compliance with the required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding head swiveling: 180° ± Grinding spindle speeds: 1500, 1700, 2200 rpm Infeed in steps: 0–40 mm/Ø Continuous infeed: 0–40 mm/Ø Table swiveling: ±6.5° Longitudinal table travel: 1530 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece weight max. (between centres, including clamping): 130 kg Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guideline Including new, modern and future-proof control system. Photo shown: Example of an already delivered machine with special options -The operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original controller, so no retraining is required. -Diagnostics function with display of PLC notifications and digital I/Os -Dressing function can be expanded or modified on request. -Spindle positioning of the workpiece spindle available on request. -New maximum infeed: 40 mm, can be extended on request. -Digital readout on 2 axes. X-axis resolution: 0.5µm Options: -Encoder with digital readout on workpiece headstock -Encoder with digital readout on grinding headstock (no height adjustment Nodpfxouxftro Ahcowl possible with spindle) -New robust internal grinding device, Ø80 mm or Ø100 mm -Increase of centre height up to 225 mm -Spindle speed control for grinding spindle Included: -Operating tools -Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic longitudinal and rapid table traverse. Versatile application possibilities in production for external and internal grinding, or for external, face, and internal grinding in a single setup for individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Gauging control The machine currently does not comply with the basic health and safety requirements as specified in BetrSichV 2015. The required minimum safety target must be determined by a risk assessment according to BetrSichV.

Būklė: labai geros būklės (naudotas), Bernardo HV 80 OSZ ilgos juostos šlifuoklis – Pramoninis medienos šlifavimo įrenginys Parduodamas Bernardo HV 80 OSZ ilgos juostos šlifuoklis, puikiai tinkantis didelių medinių plokščių, durų ir baldų detalių šlifavimui. Nwsdpfxoyq Rf Ro Ahcel Techninės specifikacijos Modelis: HV 80 OSZ Tipas: ilgos juostos šlifuoklis Maitinimas: 380–400 V / 3 fazės Tvirta pramoninė konstrukcija Didelis darbinis stalas

Būklė: naudotas, Gamybos metai: 2008, Valdymo sistema „Siemens Sinumerik 840 D“ X ašis – 800 mm Nwodpfx Ahjzzrhtscsl Y ašis – 600 mm Z ašis su 60 mm pločio disku – 460 mm Z ašis su 100 mm pločio disku – 410 mm Šlifavimo disko matmenys – 300 x 50 x 127 mm Stalo paviršiaus matmenys – 800 x 400 mm Apkabos paviršiaus maksimalūs matmenys – 1150 x 400 mm Atstumas nuo stalo iki veleno centro – 700 mm Stalo aukštis virš grindų – 1000 mm Maksimali stalo apkrova – 800 kg Mašinos svoris (be pakuotės) – apie 4500 kg Montavimo plotas (plotis x ilgis x aukštis) – apie 3500 x 3000 x 2400 mm Būklė: naudota Priedai, nuotraukose pavaizduoti įrankiai ir tvirtinimo įtaisai į komplektą įeina tik tada, jei tai nurodyta papildomoje informacijoje. Pasilieka teisė keisti technines specifikacijas ir duomenis bei parduoti įrangą prieš tai, kai bus pateiktas užsakymas!

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel range: ±8° Longitudinal table travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. cantilevered workpiece weight: 130 kg incl. clamping Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we not only deliver machines in as-new condition and with warranty, but can also provide service for your machines, including recently delivered machines, with additional options such as: - Splash guard doors - X-axis enclosure Nwedpfx Aheuxftxscol - Grinding headstock swivel angle display Available at extra cost. Geometrically overhauled and newly painted with original electrics. The machine features central lubrication and roller guides in the flat bed of the X-axis as well as pneumatic lift-off in the grinding headstock as standard. - Digital readout in 2 axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) - New, robust internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Increased centre height up to a maximum of 225 mm - Variable speed control for the grinding spindle Includes: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine tool does not currently comply with the basic safety and protection requirements as specified in the 2015 Industrial Safety Regulation (BetrSichV). The necessary minimum safety objectives must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m As a world-leading company for Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new quality and with warranty, but can also offer you comprehensive service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control with BEMA grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical cabling, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute encoder (for B axis) Standard Equipment: - Workhead with MK5 taper, optionally with MK5/short taper adapter - Tailstock with MK4 taper. Optionally with fine adjustment - Grinding spindle stock T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment, belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW Nwjdpfx Aheuwv H Hecsl - High-resolution B axis - Marposs system for grinding wheel measurement - Longitudinal positioning Marposs - GAP control (sensor on grinding spindle stock) ELASO integrated into control interface - Semi-automatic balancing by ELASO integrated into control interface - BEMAT grinding wheel measurement Optional at extra cost: - HF internal grinding spindle - Ultra-precise, highly torsion-resistant workpiece spindle - Measuring control - Extraction unit - Paper band filter Control: Basic Grinding Cycles - Workpiece zeroing with Z-position (longitudinal positioning) - Wheel measurement with BEMAT - Approach sensor GAP - Measurement of dressing diamonds - Corrections - External and internal cylindrical grinding (traverse and plunge grinding) - External and internal taper grinding (B axis swivel, dressing with straight wheel) - External and internal radius grinding (radius dressed onto the wheel) Optional Grinding Cycles - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Būklė: naudotas, Gamybos metai: 2003, Šlifavimo plotis 600 x 2000 mm Nodpfx Ahezxt T Eocowl Stalo paviršiaus plotas apie 600 x 2400 mm X ašies eiga 2100 mm Y ašies eiga 550 mm Z ašies eiga 560 mm Šlifavimo disko skersmuo maks. 400 mm Mašinos svoris apie 7,8 t.

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workpiece headstock swivelling: 360° Grinding spindle head swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±6° Longitudinal table travel: 1750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight, cantilevered: 130 kg including clamping Internal spindle mount: 80 mm Total power requirement: 6.5 kW Machine weight approx.: 2.9 t Required floor space approx.: 5.6 x 2.0 m As a world leader in Kellenberger overhaul/retrofit, we are not only able to deliver the machines in as-new quality with warranty, but can also offer you comprehensive service for your machines. Geometrically overhauled and freshly painted with original electrics, but with new WSS drive and controller in three-phase technology. Optionally available with splash guard doors and X-axis enclosure. - 2-axis digital readout. X-axis resolution 0.5 μm Available options at extra charge: - Swivel angle display for upper table - Rotary encoder with digital readout in the workpiece headstock - Rotary encoder with digital readout in the grinding spindle headstock (spindle height adjustment not possible) - New robust internal grinding attachment, 80 mm or 100 mm diameter, with height adjustment - Increase of centre height up to max. 225 mm Included: - Operating tools - Clamping tube for chuck Njdpfsd Ih Dvsx Ahcewl Further accessories on request. At present, the machine tool does not meet the essential health and safety requirements as specified in the German Industrial Safety Ordinance (BetrSichV 2015). The required minimum safety objectives must be determined by means of a risk assessment according to BetrSichV.

Būklė: naudotas, Internal diameter: 340/440 mm Grinding depth: 99,999 mm Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Spindle bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workhead swivelling: 360° Grinding spindle head swivelling: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±10° Table longitudinal travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (flying): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirement approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we not only deliver machines refurbished to as-new condition with warranty, but also offer service for your machines. Warranty: 12 months from delivery—for Germany and neighboring countries. Pure internal cylindrical grinding machine with stepless adjustable drive (0–100%). Nsdpfjd Ih Dxjx Ahcswl Available in current RAL colors! Standard centre height 175 mm, extendable to 225 mm. Fixed internal grinding spindle with belt tension via tension pulley! Z-axis reversing accuracy max. 0.01 mm! Geometrically overhauled and newly painted, with: - New electrical cabinet. - New three-phase workpiece spindle motor and controller. - 2-axis digital readout, X-axis resolution 0.5 μm. Options: - Encoder with digital display in the workhead - New stable internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height to max. 225 mm Includes: - Operating tools Further accessories on request. The machine tool currently does not meet the fundamental safety and protection requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). The minimum required safety level must be determined by means of a risk assessment pursuant to BetrSichV.

Būklė: naudotas, Grinding diameter: 250 mm Grinding length: 1000 mm Centre height: 125 mm Grinding wheel diameter: 500 mm Grinding wheel width: 80 (100) mm Bore: 203.2 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: +/- 360° Grinding spindle headstock swiveling: +/- 0° Infeed (incremental): 0–9.99 mm/Ø Infeed (continuous): 0–9.99 mm/Ø Table swivel: +/- 10° Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (overhung): 130 kg incl. clamping Cross traverse: 270 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 5.5–7.5 kW Machine weight approx.: 2.7 t As a global leader in the field of Kellenberger overhauls/retrofits, we are not only able to deliver machines in as-new condition with warranty, but can also offer you service for your machines. Geometrically overhauled and newly painted according to Kellenberger measurement protocol. Completely new electrics with new infeed control. Nedpfxjd Ih Egs Ahcswl Photos show a previously delivered machine of the same design, but with 1500 mm centre distance and universal grinding head instead of the 500 mm wheel head, purely for external cylindrical grinding purposes. Equipment: - 2-axis digital readout - New DGS paper band filter Optional at extra charge: - Semi-automatic dressing - Dressing size compensation - GAP Control - Measuring automation - Safety doors Electronically controlled infeed system with stepper motor drive. Hydraulic table longitudinal and rapid traverse movement. Powerful, non-swiveling grinding spindle headstock for production external cylindrical grinding operations. Areas of application: Machining of high-precision components in the gearbox, machine tool, and general mechanical engineering sectors. Pair grinding for the hydraulics industry. At present, the machine tool does not meet the basic safety and protection requirements such as those specified in BetrSichV 2015. The required minimum safety objective must be determined by means of a risk assessment according to BetrSichV.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Demonstracinė mašina, mažai darbo valandų. 3,7 kW variklis dideliam nuėmimo našumui, tvirta konstrukcija, tinkama nuolatiniam komerciniam naudojimui. Plieniniai būgnai su kietos gumos danga, užtikrinantys visiškai lygų ir glotnų paviršių. Nepriklausomai reguliuojamas galinis būgnas, leidžiantis kontroliuoti drožlių paėmimą. Dvivietė padavimo pavarų dėžė, pritaikoma įvairioms medžio rūšims. Sunkus pilkojo ketaus padavimo stalas, tiksliai vedamas keturiose ašyse. Būgno gaubtas su dvigubu dulkių nutraukimo jungtimi ir nukreipiančiomis plokštėmis efektyviam dulkių pašalinimui. Skaitmeninis aukščio rodmuo, leidžiantis greitai ir tiksliai nustatyti norimą matmenį. Njdpfjziw Afsx Ahcswl Gali būti naudojami 75 mm ir 100 mm pločio šlifavimo juostos. Techniniai duomenys Padavimo variklis: 0,18 kW Komplektacija: 80 gr. šlifavimo juosta sumontuota ant būgno 100 gr. šlifavimo juosta sumontuota ant būgno Aukščio rankenėlė, naudojimo instrukcija ir atsarginių dalių sąrašas

Būklė: naudotas, Naudota mašina Pagaminimo metai: 1988 Įranga ir techniniai duomenys: – Darbinių stalų ilgis: 1440 mm – Bendra dviejų darbinių stalų plotis: 710 mm – Darbinių stalų pakreipimo reguliavimas: 0–30 laipsnių – Darbinis slėgis: 6 barai – Šlifavimo juostos ilgis: 2170 mm Nwsdpszk Ny Ejfx Ahcel – Šlifavimo juostos plotis: 150 mm – Šlifavimo juostos greitis: 10–20 m/s – Osciliacinio įrenginio vertikalus reguliavimas: 125 mm – Oro sąnaudos: 25 NL/min – Elektros sritis: 400 V / 2,9 kW Svoris: 490 kg Prieinama: per trumpą laiką Sandėlio vieta: Röllbachas

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight: approx. 3 t High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle refurbishers - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor are electrically interlocked! Internal grinding spindle can only be activated when in position. A quantum leap in safety technology. - Infinitely variable grinding spindle speed: 1,000–1,500 rpm - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of grinding spindle speeds - Swivel angle display for the upper table - Swivel angle display for grinding spindle headstock - Marposs contact sensor for external grinding only - Marposs fluid contact sensor for internal grinding Njdpfxjt Ii Rrj Ahcewl - Centre height up to 250 mm possible The machine is already delivered. An identical machine can be configured with additional options. The machine tool currently does not comply with the fundamental safety and protection requirements as stipulated in the German Operational Safety Ordinance (BetrSichV) 2015. An increase of the required minimum safety objective must be determined by means of a risk assessment according to BetrSichV.