HL 15

MSM

Gamybos metai: 2026, būklė: naujas, New machine Year of manufacture: 2026 The space-saving, swiveling vacuum press with a pressing area of 3500 mm x 1420 mm. Technical basic equipment of the vacuum press: Unless otherwise agreed, the vacuum press is powder-coated in RAL 7012 and RAL 7035 as standard. Special color options are available upon request, must be clarified in advance, and may incur additional costs. Welded table construction for professional use, mounted on a swiveling carriage, fitted with 4 castors, surface load capacity: 150 kg. When not in use, the machine can be swiveled and locked to save space, reducing the depth requirement to only 800 mm. The table surface is made from a 22 mm thick MDF laminate panel, covered in the pressing area with a slotted MDF vacuum distributor plate. The membrane frame opens with the support of 2 gas springs mounted laterally on the machine. A natural rubber membrane (2 mm thickness, 780% elasticity, temperature resistant up to 70°C) is installed, fixed with a clamping system for rapid membrane replacement. The pressing chamber is fully sealed with a continuous gasket profile integrated in the membrane frame. Oil-lubricated vacuum pump with a suction capacity of 40 m³/h and two vacuum tanks with a total volume of 200 liters. Press chamber evacuation and aeration are performed via a 3-way ball valve located at the front of the machine. The machine is pre-assembled and delivered on a pallet. Please note that a forklift with sufficient lifting capacity and fork length is required for unloading. Optionally, you can book initial commissioning and a brief operating instruction session provided by one of our technicians. If required, we are happy to provide a separate quotation for this service. Summary of key specifications: - Welded frame construction - Highly flexible natural rubber membrane, thickness: 2 mm, elasticity: 780%, high recovery capability, suitable for temperatures up to 70°C - MDF vacuum distributor plate - Digital vacuum control VAK-CONTROL 1 with automatic shut-off - Vacuum pump: oil-lubricated, 40 m³/h - Max. vacuum: -0.99 bar - Max. pressing pressure: up to 9.9 t/m² - Connected load: 1.40 kW (400 Volt) - Vacuum tank: 200 liters - 4 swivel castors with locking brakes - Additional 13 mm vacuum connection - Pressing area: 3500 x 1420 mm - Table height to vacuum distributor plate: approx. 895 mm - Machine height closed: approx. 960 mm - Machine height closed with cover plate: approx. 1030 mm - Operating dimensions: 3790 x 1700 x 2150 mm (LxWxH) - Dimensions when swiveled: 3790 x 800 x 1750 mm (LxWxH) Customs tariff number: 84659400 Dcsdpfx Afeywpt Ij Aog Net weight: 570 kg Gross weight: 660 kg Incl. cover plate 3514 A cover plate not only protects your membrane from UV radiation, but also converts your vacuum press with base frame into a mobile worktable that can be used flexibly throughout your business. - Coated cover plate - Rigid, welded steel frame - Opening assistance via gas springs Customs tariff number: 84669280 Net weight: 105 kg Gross weight: 105 kg The cover plate can only be supplied together with a vacuum press.

Gamybos metai: 2022, būklė: beveik kaip naujas (naudotas), Piovan dryer SIST. DEUM. GMP150+2xPTUN2000 COOLING SYSTEM GMP150+2xPTUN2000 cooling system Dsdpfx Afjvhb S Ss Aocg As new, unused The PTUN... module is a single drying unit for plastic material. The machine consists of the following components: • Hopper • Support frame • Heating chamber • Connection pipes • Air control valves.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, MSM džiovintuvas (6-9) SD65 modelis, 2800W, su drėgmės regeneratoriumi, molekuliniais sietais, su plastikiniu įvadu, 2005 m. gamybos. Dcodpeyznz Sefx Af Aog

Gamybos metai: 2000, būklė: labai geros būklės (naudotas), Neuman and Esser ICM 48/60 separator mill, mill unit only without accessories, in good condition. We also have small used ICM mills, such as the ICM 8, as well as a large ICM 1000. Dcjdpoh Ugwyefx Af Aeg

Būklė: geras (naudotas), Gamybos metai: 2001, - Manufacturer: IDE - Model: 45/4 - Year of manufacture: 2001 - Single-screw extruder Ø45mm, 25 L/D - Analog control on the right - Screw profile: PVC - 4 heating zones on the barrel - 4 heating zones for tooling - Motor power: 8.5 kW Dcjdpjuhpiyefx Af Aeg - Up to 60 kg/h Good overall condition, very clean machine

Gamybos metai: 2021, būklė: naujas, Hosokawa Alpine and Mikropul ACM and ZPS spare parts for your mills ACM 2 - ACM 150 or ZPS 100 - ZPS 630. Other manufacturers or models available upon request. Spare parts such as: grinding discs, classifiers, impact liners, complete bearing assemblies (new, used, or fully refurbished), grinding stones with carbide plates, air guide wheels, or grinding pins. We have over 25 years of experience with highly wear-resistant spare parts! Dcsdjgn Edlopfx Af Aeg

Būklė: naujas, Gamybos metai: 2026, Our belt puller can be built in various sizes. 40-80 m/min Contact length from 170 mm to 800 mm Dcodjhd Ndxspfx Af Aeg MADE in GERMANY

Gamybos metai: 2000, būklė: labai geros būklės (naudotas), VACUUM CALIBRATION TANK LÜERS VT 125-1-6 Chamber: 1 Pipe diameter: max. 125 mm Length: 6 meters Dsdsiidm Tspfx Af Ascg Feed: electric forward and reverse Year of manufacture: 2000 Material: stainless steel (VA)

Gamybos metai: 2017, būklė: beveik kaip naujas (parodų įrenginys), • ideal für alle Hemdenstoffe (FX 1000) 1000 mm Transportband • separate Einzugs- und Transportbänder, "Cool Feeding" • spezielle Isolierung, geringe Wärmestrahlung • Ober- und Unterhitze einzeln regelbar, mit Temperaturschutz (1000 mm – 39,37 Zoll Bandlänge) • separate Heizbereiche wählbar: OBEN (Hemden), UNTEN (Oberbekleidung) Dcjdpfx Aopfa Nhsf Ajg • spezielle Schnellaufheizfunktion für zügiges Hochfahren der Maschine • Touchscreen für Programmspeicherung und Servicefunktionen • optionale Luft- und Kompressionskühlung • Fehlerdiagnosesystem

Gamybos metai: 1998, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, High-impact mixer (continuous mixer and agglomerator), 45 kW SEW direct drive, feed hopper and main shaft made of stainless steel 304, equipped with 4 stainless steel 316 nozzles, inspection door safety guard missing, documentation available, dimensions 136 x 120 x 309 cm (LxWxH), weight 1,728 kg. Dcodpfx Asuy Tavjf Asg