Aukštas - Juostiniai pjūklai

Moehringer / Braun Canali multi-line TB 1250 MF-20

Gamybos metai: 2004, Sąlyga: naudotas, High-performance band resaw Moehringer / Braun Canali Type: multi-line TB 1250 MF-20 Roller diameter: 1250 mm Roller width: 150 mm Bljdedfcryjpfx Aahed Saw blade speed: 28–50 m/s Connected load: approx. 45 kW Feed rollers: 2x4 Roller height: 200 mm Cutting height up to the lower edge of the pressure guide: 400 mm and higher Cutting width: 250 mm to the left of the saw blade and 250 mm to the right of the saw blade With central cutting device Complete technical documentation Original photos to follow

Sąlyga: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Bedpfow Sy T Hox Aahsld Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim

Sąlyga: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Naujas Friulmac EQ 004 2.5 su padavimo konvejeriu ir padavimo bunkeriu Bodpfx Aasvupm Djheld Valdymas liečiamu ekranu ir automatinis reguliavimas Darbinis ilgis: min 190 mm – maks 2500 mm Plotis: min 30 mm – maks 250 mm Storis: min 12 mm – maks 35 mm Greitis: 6–25 m/min 2 x 2 Viršutinis velenas – 3 kW – 720 aps./min. Pagrindinis profiliavimo velenas – 4 kW – 7200 aps./min. Dėl išsamesnės informacijos galiu atsiųsti originalią dokumentaciją.

Gamybos metai: 2011, Sąlyga: beveik kaip naujas (naudotas), For sale is 1 roller conveyor including one geared motor each: Technical data: Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Load capacity: up to 4 tons Geared motor per conveyor: SEW-EURODRIVE R87 DREE90L4 (for more details, please refer to the type plate in the photo) Three out of four roller conveyors are equipped with a continuous wooden side wall along the entire length, while one conveyor features a lateral wooden wall over a length of 5.20 m. Two out of the four conveyors are each fitted with 3 lateral removal systems. (see pictures) Blsdpfx Aasihpn Nohsd

Sąlyga: labai geros būklės (naudotas), Multiple 150 m³ underground steel storage tanks (fire water tanks) Capacity: 150,000 litres Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are converted into underground firefighting water tanks in accordance with DIN 14230: The tank is equipped with a fire water suction connection according to DIN 14244, featuring an installed firefighting coupling / permanent coupling A as per DIN 14319, version Form B, without dip tube. Additionally, the tank includes a vent flange connection (DN 100) with cap, total length approx. 1,300 mm, suitable for 800 mm earth coverage and 500 mm above ground. - The tank is emptied, cleaned, and externally coated with bitumen paint by us at the factory - On request, we can provide the tank with a full internal bitumen-based lining (for corrosion protection) or an internal epoxy resin coating Cost-effective delivery with our own truck is possible. Simply provide us with the delivery location and you will promptly receive the exact shipping costs. Inspection is possible at any time by prior appointment. Bsdpfjfnh Tgex Aahold Should you need further information, please call us or send an email to b.barth (a) barth-tank.de

Sąlyga: labai geros būklės (naudotas), ONE-SIDED DESTACKING STATION - Upper traverse, horizontally shiftable by 180° - Console table with vacuum clamps - Lift table (internal) with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operating panel - External roller conveyor for transporting the stack of sheets from destacking - External driven roller conveyor from destacking, optionally with belt for 90° transfer of sheets - Operating capacity (cycles/min): 12-15 Bljdpfxjcggy Se Aahed - Plate thickness (min/max) mm: 10 - 40 - Min. plate dimensions mm: 250 x 320 - Max. plate dimensions mm: 1200 x 3000 - Total connected load Kw: 10

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 288, Entbarker mit Zuführförderer für maximalen Stamm-Ø entweder bis 460 mm oder 600 mm, Vorschubgeschwindigkeit bis 100 m/min, Vorschneidrotor und Entbarkerrotor, der Entbarkerrotor mit Öffnung 620 mm ist NEUPRODUZIERT mit Gewährleistungszeit, inkl. Vorrichtung zum Wechseln des Vorschneidrotors. Auf den untenstehenden Fotos im derzeitigen Zustand, demontiert. Lieferzeit 3 Monate ab Bestellung. Blsdpstk N Dkofx Aahjd

Sąlyga: naudotas, Gamybos metai: 2021, pjūklo disko skersmuo: 800 mm, sukimosi greitis (min.): 1 450 aps./min, galia: 5,5 kW (7,48 AG), Chop Saw AS Very good, well-maintained condition Saw blade diameter: 800 mm. Robust steel tube frame. High-performance saw motors. Pneumatic material clamps (3 pcs., vertical). Two-hand safety operation. Bljdpfed Szf Nox Aahed Coolant system. Protective cover. Optionally with length measuring system or automatic positioning system. Available as a saw-drilling or saw-punching automatic machine on request.

Sąlyga: geras (naudotas), The debarker is ideally suited for debarking both hardwood and softwood logs. Blsdjtuyr Ispfx Aahsd Carriage made of heavy-duty steel construction 5 pairs of drive wheels Milling arm made from heavy-duty steel construction Hydraulic milling head 22 kW motor The log feeder shown in the photos is not included in the offer and is available at an additional cost of 25,000 PLN / 5,500 EUR.

Sąlyga: reikia remonto (naudotas), Gamybos metai: 1999, Funkcionalumas: neveikiantis, Storti prizmės staklės 4x35 AG Bledjlxqk Rspfx Aahod Volelio įvadas Išėjimas Valdymo pultas Mašinos restauravimui