Rūšiavimo mašina

Modula VertikalLift MC25D

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, Indeksuojamas stalas 400 mm rankinis Komplekte yra įrankiai Stalo skylė: 10 - 130 mm Bsdpfx Ajxclfzjg Iswt Raktų plotis: nuo 2 iki 32 mm Padavimo greitis: 0,5 - 5 m/min; Stalo skersmuo Ø: 690 x 460 mm Stalo apkrova: 2000 kg Stūmoklio eiga: 0 - 425 mm Ilgis: 1300 mm Plotis: 1100 mm Aukštis: 1400 mm Svoris: 1800 kg

Būklė: naudotas, TECHNICAL DATA - Number of axes: 3 MILLING SPINDLE - Tool holder: BT40 - Spindle drive power: 15 kW - Spindle speed: 8,100 rpm - Gearbox - Number of spindle speed ranges: 2 - Spindle hours: 4,000 h LINEAR AXES Bwedpfoyn R Igox Ag Iet - Travel X/Y/Z axes: 1,270 / 508 / 635 mm - Rapid traverse rate (X/Y/Z): 35.6 / 35.6 / 35.6 m/min - Feed rate (X/Y/Z): 21 m/min - Distance from table to spindle nose: 742 mm TOOL CHANGER - Tool changer type: Arm-type magazine - Number of tools in magazine: 40 TABLE - Table size: 1,321 x 495 mm - Max. table load: 794 kg ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 30 kW DIMENSIONS AND WEIGHT - Footprint: 3,870 x 2,510 mm - Machine height: 2,690 mm - Machine weight: 6,260 kg MACHINE HOURS - Power-on hours: 16,247 h - Operating hours: 6,025 h EQUIPMENT - Control: HAAS - Interfaces: Ethernet / RS232 / USB / PCMCIA - Teach-in programming - Electronic handwheel - Synchronized tapping - Preparation for 4th and 5th axis rotary tables - Coolant tank: 208 l - Chip conveyor - Tool measurement probe - Electrical transformer

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 9 350 mm, bendras plotis: 3 980 mm, bendras ilgis: 3 074 mm, keliamoji galia vienai sandėliavimo sekcijai: 380 kg, įėjimo įtampa: 400 V, 3 units in stock Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3650x864 Control: C3000, with B/W OP3000 display Serial Number: 06009822 Year of Manufacture: 2006 Load per Tray: MediumX: 380 kg (evenly distributed) Tray Dimensions: 3650 x 864 mm Number of Trays: 48 units (more available on request) Shuttle Dimensions (W x D x H): 3980 x 3074 x 9350 mm (Kardex height is adjustable to available ceiling height) Power Supply: 3/N/PE 400 V, 17 A, 50/60 Hz, 8.6 kVA This offer is valid until sold Technical details per Shuttle: - Maximum total capacity of each KARDEX Shuttle XP: 2 x 32,700 kg - Maximum tray capacity: 48 trays, 380 kg each, evenly distributed. Additional trays available on request. - Tray dimensions: 3650 x 864 mm - Machine dimensions (W x D x H): 3980 x 3074 x 9350 mm - System footprint: approx. 12.23 m² - Capacity with 48 trays: approx. 151 m², each tray approx. 3.15 m² - Electronic volume measuring system with 25 mm grid display - Access opening with sliding doors for safety of persons and stored goods - C3000 control with B/W OP3000 display - LED anti-glare lighting above access point - Use of toothed belt for minimal noise - Use of toothed belt for the fastest picking speed Price: On request, only via email Price: excluding VAT, including transport, installation, and warranty Delivery time: available from stock Machinehandel De Leeuw BV is one of the few companies in Europe trading and stocking mainly used Kardex Remstar VLM automatic lift and rotary storage systems. Please check our website for the current stock. We install and/or dismantle these systems safely, using VCA-certified engineers—a service we have provided for more than 30 years. Bwodowgyxtepfx Ag Ijt We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Būklė: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 06007153/001, bendras aukštis: 6 050 mm, bendras plotis: 3 380 mm, bendras ilgis: 3 074 mm, keliamoji galia vienai sandėliavimo sekcijai: 210 kg, statybinis aukštis: 6 050 mm, įėjimo įtampa: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: 06007153/001 Year of Construction: 2006 Total Load: 2 x 33,550 kg Load per Tray (Medium): 205 kg (evenly distributed) Tray Dimensions: 3050 x 864 mm Number of Trays: 36 units (more or heavier trays available upon request) Dimensions Shuttle W x D x H: 3380 x 3074 x 6050 mm (height of Kardex adjustable to available height) Power Supply: 3/N/PE400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid provided the system has not been sold Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed, more or heavier trays available upon request - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Capacity with 36 trays: approx. 95 m², each tray is approx. 2.64 m² - Electronic volume measurement system in 25 mm increments (grid) - Access opening with sliding doors for personnel and goods protection - Control C2000, with B/W OP2000 display - LED anti-glare lighting above the access point - Use of toothed-belt drive for minimum noise - Use of toothed-belt for fastest order picking - Shelf distance adjustable in 25 mm increments via support profiles, prerequisites for high-density storage - Integrated weight management controls tray weight - Including light pointer Price: On request, inquiries via email only Price: excl. VAT, including transport and installation Bwjdpfjxq Tbtex Ag Ijt Delivery time: from stock Machinehandel De Leeuw BV specializes in pre-owned paternoster systems from, among others, Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2014, Siemens 840 D Pasukama valdymo konsolė su SIEMENS 840 D Solution Line valdymu. Eigos kelias X 8000 mm Eigos kelias Y 1300 mm Eigos kelias Z 2200 mm Įrankių sistema SK 50; Capto C8 Pagrindinis velenas 20–4000 aps./min. 3D mašinos tūrio modelis HEIDENHAIN matavimo sistema visose ašyse. Automatinis centrinis tepimas su slėgio ir laiko kontrole visoms ašims ir judėjimo elementams. Matavimo jutiklių sistema RENISHAW RMP60 M Įrankio lūžio kontrolė per matavimo galvutę BRANKAMP CMS susidūrimo stebėjimo sistema su dviem matavimo kanalais: FIBRO sukamojo fiksatoriaus centrų aukštis 1100 mm FIBRO sukamojo fiksatoriaus centrų atstumas 900–3000 mm Maks. apsisukimo Ø FIBRO sukamojo fiksatoriaus 2200 mm FIBRO karuselinio stalo D=1600; 250 aps./min. Bsdpfew Syv Uex Ag Iowt Karuselinio stalo FIBRODYN 1600 mm: Stalo plotas 6000x2000 mm d‘Andrea slankiklis Universalus frezos galva Automatinis įrankių keitiklis ATC, 80 vietų žurnalas M versijoje: 3 frezos galvos vietos, Aukšto slėgio siurblys 30 bar Darbo valandos 4261 h

Gamybos metai: 1999, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition, equipped with a tool lift system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Tool holder in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by the machine body of the tool tray) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine dimensions (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt, 50 Hz Connected load: 9 kW Equipment: • The machine has an electric control for the broaching stroke movement with both manual and automatic operation. • Integrated coolant/lubrication system • Tool lift system for flat broaching tools (no automatic feed) • The broaching slide with pull head holder is equipped with flat guides on both sides Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg) • Complete machine documentation, including CE declaration of conformity Remarks: The machine is ideal for manufacturing keyway slots. Thanks to its robust machine bed and the integrated tool lift system, it is especially well-suited for quick and easy use of flat broaching tools. The machine has had very limited use and is in near-new condition. The machine is available for inspection at our warehouse and can be demonstrated under power. Bedpfxsr A Hcbs Ag Ijwt Our direct contact details and further information about the machine can be found in the attached PDF document.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, tekėjimo ilgis: 700 mm, X ašies eiga: 205 mm, Z ašies eigos atstumas: 700 mm, ašies variklio galia: 22 000 W, bendras aukštis: 2 800 mm, bendras ilgis: 6 000 mm, bendras plotis: 3 900 mm, bendras svoris: 9 800 kg, Complete machining with dual spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, axial and radial Large jaw cabinet with inserts OGL gantry loader with approx. 10 kg payload capacity Bwedjyn Em Ropfx Ag Iet Chip conveyor Paper band filtration system with pressure tank Maximum turning diameter: 400 mm X-axis travel: 205 mm Z-axis travel: 700 mm Spindle bore: 62 mm Spindle speed: 6000 rpm Spindle motor power: 22 kW Counter spindle speed: 6000 rpm Counter spindle through-hole: 62 mm Counter spindle motor power: 15 kW Tool changer: 16 positions Driven tool speed: 6000 rpm Lower turret positions: 16 Driven tool speed: 6000 rpm Driven tool motor power: 7 kW Chip conveyor: yes Tool eye: yes Length: 6000 mm Width: 3900 mm Height: 2800 mm Weight: 9800 kg Please note: The information on this page has been provided by us and, wherever possible, obtained from the manufacturer, to the best of our knowledge and belief. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend verifying all critical details independently.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2015, Didžiausias ruošinio skersmuo: 400 mm Didžiausias ruošinio ilgis: 300 mm Bodpfx Aoxy Ac Seg Iewt Didžiausias griebtuvo skersmuo: 500 mm Didžiausias apsukimo skersmuo: 520 mm X ašies eiga: 1 110 mm Z ašies eiga: 595 mm Pagrindinis velenas: galia 40 / 100 % ED 47/34 kW Pagrindinis velenas: sukimo momentas 40 / 100 % ED 600 Nm Pagrindinis velenas: maks. apsukos: 2 850 aps./min. Fanuc 31i Be Y ašies

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 2 200 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: G3158-0645, HYUNDAI WIA MODEL L300C 2-ACHSEN CNC-DREHMASCHINE MIT FANUC 0i-T Sehr geringe Betriebsstunden – lediglich 2.200 Stunden Schneidzeit KÜHLSYSTEM – HOCHDRUCK 20 BAR AUTOMATISIERUNG VON TEILEN – STANGENLADER-SCHNITTSTELLE SPÄNEFÖRDERER – SEITLICH GELENKT CNC-STEUERUNG – MANUAL GUIDE-I (NC FANUC 0i) MESSVORRICHTUNG – SCHNELLWERKZEUGEINSTELLER – MANUELL TRANSFORMATOR – 35 KVA UND KABEL MASCHINENBAU & AUSSTATTUNG • Einteiliges, hochbelastbares Maschinenbett aus Guss für höchste Präzision und Steifigkeit • Leistungsstarke Hauptspindel mit 3.000 U/min • Schwerzerspanung mit exzellenten Leistungen • 12-fach-Starre Werkzeugrevolver • Eilgang 20 x 24 m/min • Gehärtete und geschliffene massive Flachführungen MASCHINENKAPAZITÄTEN Umlaufdurchmesser über Bett: Ø 750 mm Umlaufdurchmesser über Schlitten: Ø 480 mm Max. Drehdurchmesser: Ø 560 mm Max. Drehlänge: 720 mm Stangendurchlass: Ø 90 mm SPINDEL Futtergröße: Ø 305 mm Spindelbohrung: Ø 102 mm Spindeldrehzahl: 3.000 U/min Motor (Max./Dauer): 26/22 kW Drehmoment (Max./Dauer): 1.098/929,7 Nm Spindeltyp: Riemen + 2-Gang-Getriebe Spindelaufnahme: A2-8 VORSCHUB Verfahrweg X: 335 mm Verfahrweg Z: 750 mm Eilgang X: 20 m/min Eilgang Z: 24 m/min Schlittenart: Flachführung REVOLVER Anzahl Stationen: 12 Werkzeugdimension – Außen: 25 mm² Werkzeugdimension – Innen: Ø 50 mm Indexierzeit: 0,3 Sek./Schritt REITSTOCK Pinolenaufnahme: MK 5 Pinolendurchmesser: Ø 100 mm Bjdew Dcdyepfx Ag Iowt Pinolenhub: 120 mm Reitstockweg: 750 mm TANKINHALTE Kühlmitteltank: 220 l Schmierstofftank: 1,8 l STROMVERSORGUNG Elektrische Anschlussleistung: 30 kVA Kabelquerschnitt: über 35 mm² Spannung: 415 V / 50 Hz / 3 Phasen MASCHINE Stellfläche (L x B): 3.506 x 2.002 mm Höhe: 1.997 mm Gewicht: 6.400 kg STANDARD-LIEFERUMFANG DER MASCHINE • Ø 305 mm Hohlspannfutter (3-Backen) • 220 l Kühlmitteltank • Türverriegelung • Fußschalter Spannfutter • Rundumvollverkleidung • Reitstock mit Pinole • Signalleuchte • Standardlaufspitze • Schneller Werkzeugeinsteller • Ausgleichskeile • Bedienungsanleitungen • Elektro- und Mechanikpläne

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, veikimo valandos: 29 000 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, The INDEX C200 – built in 2009 – is a high-performance CNC production turning center equipped with a FANUC 31i control, main and counter spindle, and a 65 mm bar capacity. The machine features a premium 3-turret design, with turrets 1 and 2 each providing X-, Z-, and Y-axis movement, while turret 3 is dedicated to operations on the counter spindle. All three disc turrets offer 10 stations each, enabling highly flexible complete machining with powered tools at up to 6,000 rpm. Equipped with a parts handling gantry, conveyor, C-axes on both main and counter spindles, and powerful spindle drives, this machine is particularly suitable for productive series manufacturing of complex turned/milled components. Control: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disc turrets Bar capacity: 65 mm Machine bed: vertically arranged cast iron machine bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Output: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: 0.001° resolution Counter spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Output: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: 0.001° resolution Counter spindle Z-axis: 700 mm travel Z-axis rapid traverse: 50 m/min Tool carriers / turrets Three-disc turret configuration, each with 10 stations. Tool system for 10 stations: Cylindrical shank DIN 69880 – Ø30 x 55 mm. Tool carrier 1 X-, Z-, Y-axis 10 stations X-axis: 110 mm Bwsdpfx Agoy Tmhze Iot Z-axis: 320 / 550 mm as per documentation Y-axis: 100 mm, ±50 mm Powered tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 2 X-, Z-, Y-axis 10 stations X-axis: 110 mm Z-axis: 550 mm Y-axis: 100 mm, ±50 mm Powered tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 3 X-axis 10 stations Used exclusively for machining on the counter spindle X-axis: 180 mm Powered tools: 6.5 kW / 16 Nm / 6,000 rpm Additional technical equipment as per documentation Gantry loader with numerically controlled Z-axis Part discharge from main or counter spindle onto conveyor Remnant removal from main spindle into remnant bin Gantry loader: Traverse speed: 100 m/min Travel range: 70 mm Maximum workpiece diameter: 90 mm Maximum workpiece length: 250 mm Maximum remnant length: 250 mm Maximum workpiece weight: 3.5 kg Hydraulic system: Delivery flow: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Cooling circuit: Delivery flow: 19 l/min Cooling unit capacity: 13 kW Coolant system: Pump flow rate: 80 l/min / 8 bar Tank volume: 300 l Chip conveyor: Chip discharge height: 1,250 mm