Profilio lenkimo velenų velenai 360 mm

MG AR360

Būklė: naudotas, CNC press brake AMADA model HFBO 50 x 2000 Serial no. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes – CNC control Operateur II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Throat depth: 420 mm Distance between side frames: 1660 mm Maximum tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Power supply: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operateur II, Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2 - 2 freely programmable back gauge fingers, adjustable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric footswitch and/or two-hand control panel - Mechanical lever-type tool clamping for the top tool (5 pcs AMADA Expert, 5 pcs UKB 50.667 H=120 mm) - Tool holder for the bottom tool, 60 mm wide Gedpfx Aew Iq Ugecyoip - 11-piece upper tool set, 30°, total length 1675 mm - comprising: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) - 2-piece lower tool, 88° - V 8, total length 1250 mm - comprising: 1x 835 / 1x 415 mm - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Būklė: naudotas, Gamybos metai: 1965, Honing diameter: 80 mm Stroke: 280 mm Throat depth: 300 mm Total power requirement: 6 kW Machine weight: approx. 2.6 t Max. honing diameter: 10–100 mm Max. honing depth: approx. 250 mm Max. spindle stroke: 260 mm Throat depth: 300 mm Installation height: 1,000 mm Table size: 350 x 500 mm Table height above floor: 500 mm Spindle speeds, steplessly adjustable: approx. 85–300 rpm / 170–600 rpm Stroke speed, stepless hydraulic: 0–23 m/min Spindle drive: 2 kW Total drive: approx. 6 kW – 380 V – 50 Hz Weight: approx. 2,600 kg Accessories / Special equipment: - Integrated 2-station rotary table for accommodation of 2 workpieces, with mechanical workpiece clamping via hand lever. - Hydraulic feed of the tool Gedpfx Aot Hwupecyjip - Shut-off via timer, presumably with air measuring device - Honing oil system, various splash guards, etc. Condition: good – demonstration ready Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further honing machines constantly in stock; please inquire with us.

Gamybos metai: 2009, būklė: geras (naudotas), Lifting capacity: 30 t Giedpfx Aoqiz N Rscyjp Precision lift Lifting height: 9 meters

Būklė: naudotas, CNC Oxy-Fuel Cutting System BACH Type ACW 2500 Oxy-Fuel Cutting Machine with CNC Controller NBS 400 Machine No. 14 561-06 Year of Manufacture: 2006 Cutting Area: 2500 x 6500 mm Track Length: 8000 mm Track Gauge: 3345 mm Track Height: 650 mm 2x Machine Cutting Torches with Burn Table Godpfx Aof Ncadjcyeip

Būklė: geras (naudotas), WEBER pipe extrusion line including: Godpevryhysfx Acysip WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Comparable to Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Press force 220 t Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Stroke 350 mm Installation height 600 mm Throat depth 450 mm X-axis travel 750 mm X-axis speed 300 mm/sec R-axis travel 250 mm R-axis speed 100 mm/sec Clear distance between frames 2555 mm Machine length 3730 mm Machine width 2290 mm Overall height 3055 mm Table height 820 mm Motor power 22 kW Oil tank capacity 300 l Machine weight 11500 kg (Technical data may vary depending on equipment) Standard equipment: • 3 CNC axes (Y1, Y2, X) • Double-guided press beam, stable and precise • Robust double-guided backgauge Gsdeq D Dzlspfx Acyjip • Manually adjustable backgauge fingers, double-guided on linear guide • Movable front arms with height adjustment • Lateral and rear safety covers • Lower die adapter rail 60 mm • Manual upper tool clamping system (Promecam system) • Manual crowning • Foot switch with emergency stop • 380 V, 50-60 Hz, 3 phase • LED lighting Including the following options: • Delem control DA 66T • Fiessler AKAS 2M laser finger guard • FPSC Safety PLC (manual) • X-R axis with servomotors • CNC crowning for high bending precision • 2 additional backgauge fingers - Other bending lengths and thicknesses are available upon request with the appropriate accessories! -

Būklė: naujas, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with separate wire feeder. Its advanced digital technology and duty cycle deliver outstanding arc characteristics for industrial MIG/MAG applications. Integrated synergic controls make setup simple and reduce spatter during welding. Equipped with the WF wire feeder, it offers precise welding parameter control to ensure perfect quality. MULTIPROCESS MIG/MAG: - Steel and stainless steel wire: Ø 0.6 to 1.6 mm - Aluminium wire: Ø 0.8 to 1.6 mm - CuSi and CuAl wire: Ø 0.8 to 1.6 mm - Cored wire (polarity reversal): Ø 0.9 to 2.4 mm Godpsmxkdpsfx Acyoip MMA DC / Pulsed: basic, rutile, and cellulosic electrodes. TIG DC Lift / Pulsed. Gouging.

Gamybos metai: 2002, būklė: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Gjdpfx Acshzbipeysip Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Gamybos metai: 1992, būklė: labai geros būklės (naudotas), Weishaupt WM-G50/2A Gas Burner – ZM Version Capacity: 600-5200 kW Year of manufacture: 1992 Includes Dungs DN50 gas train. We speak Russian! Inspection by prior telephone appointment only! Preferred sale to dealers, commercial traders, or for export. All information provided without guarantee; subject to error and prior sale. The seller accepts no liability for typing or data transmission errors. We are happy to purchase your used boiler or burner! Gedshl In Rspfx Acysip Of course, we also take care of all formalities. Loading possible.

Būklė: labai geros būklės (naudotas), 200m³ Stainless Steel Tanks Quantity: 3 units 180m³ Stainless Steel Tanks Diameter: 4.70 m Height without legs: 14 m Wall thickness: 4.1 mm Bottom thickness: 5.1 mm We offer transport with our special trailer to all regions of Europe! Giodsfngl Nopfx Acyep