Didelių gabaritų sandėlis Padėklų stelažų statramsčiai

Meta (Thyssen) Multipal S Abm.: 7.000 x 500 mm

Būklė: geras (naudotas), Gamybos metai: 2022, Stow Rėmai: 9000x1100x100 – 600 vnt. – 95 EUR Psdpfeqzhncjx Adzjgl 9500x1100x100 – 200 vnt. – 100 EUR 10000x1100x100 – 90 vnt. – 105 EUR Sijos: 2700x130 mm (3000 kg keliamoji galia) – 8744 vnt. – 11 EUR 3600x160 mm (4000 kg keliamoji galia) – 378 vnt. – 14 EUR Kojų apsaugos – 890 vnt. – 6 EUR/vnt.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. Pedpfx Adeh Ek Daezogl The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2019, veikimo valandos: 2 444 h, keliamoji galia: 1 000 kg, kėlimo aukštis: 2 700 mm, kuro tipas: elektrinis, stiebo tipas: dupleksas, statybinis aukštis: 1 850 mm, šakių ilgis: 1 150 mm, pavaros tipas: Elektro, Aukštuminis krovinių krautuvas Krovinių svorio centras: 600 Stiebo tipas: Duplex Būklė: Paruoštas naudojimui ir visiškai veikiantis Techninė būklė: gera Priekinės padangos tipas: Poliuretanas Galinės padangos tipas: Poliuretanas Baterijos įtampa: 24V Baterijos tipas: Ličio jonų Pgsdpfsvtu A Uox Adzel Baterijos pagaminimo metai: 2019 Aprašymas: Integruotas įkroviklis, sulankstoma operatoriaus platforma

Būklė: labai geros būklės (naudotas), Dexion P90 pallet storage racks. The racks are in very good condition. We offer approximately 30,000 pallet spaces in our inventory. Frame heights available: 6000/1100 – 98 EUR 7000/1100 – 115 EUR 8000/1100 – 130 EUR 9000/1100 – 147 EUR Beams: BX 120/40/13/2700, 2400 kg load capacity – 17 EUR each BX 100/50/15/2700, 2850 kg load capacity – 18 EUR each BX 60/40/13/2700, 900 kg load capacity – 14 EUR each Invoices are issued. We invite you to cooperate. Pedpohq Dd Tofx Adzsgl

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Pgsdpfxsmhhype Adzsl Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking Used: Hot-dip Galvanised Bolted System Scope of Delivery: - 4 double-sided uprights, height 3,500 mm, each with 1,200 mm base plates - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre-to-centre distance - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed Description: - Robust steel construction made of IPE sections - Surface of all components hot-dip galvanised - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, each with 1,200 mm depth, standard Pgsdpfx Adsmkixwozel = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. The material is properly packaged to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, suitable for dowelling, and able to absorb the applied loads. Floor structure and load-bearing capacity, as well as any necessary official approvals, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Būklė: naudotas, rida: 250 km, galia: 235 kW (319,51 AG), pirmoji registracija: 09/2025, kuro tipas: dyzelinas, bendras svoris: 18 000 kg, ašių konfigūracija: 2 ašys, spalva: balta, pavaros tipas: automatinis, krovimo vietos ilgis: 4 000 mm, krovinių skyriaus plotis: 2 450 mm, krovos erdvės aukštis: 600 mm, Įranga: ABS, kranas, oro kondicionavimas, suodžių filtras, visų varančiųjų ratų pavara,

Būklė: naujas, Gamybos metai: 2025, Fully automatic carton sealing machine for lids. Efficient/fast and precise sealing and gluing (one direction) of identical carton sizes in series. Specifications: Carton size in: L(200-600)xW(150-500)xH(100-500)mm; max. machine cycle in idle mode: 20 cycles/minute; Power supply: 220/380V, 0.3kW; Tape width in mm: 48/60/75; Machine dimensions: L1770xW850xH1520mm; Weight: 250kg. Please note that our new equipment prices are often below the usual used prices. Feel free to send us your enquiry and let us know your packaging requirement. - Generally, 30-50 different new machines are always available from stock for immediate delivery. For machines requiring custom manufacturing, we offer very short lead times starting from around 3 weeks. - All machines are available with full warranty. Pgjdpfxev Nkv Ae Adzol

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Racking Used: Bolted System, Hot-Dip Galvanised Version Scope of delivery: - 4 upright frames, height 3,500 mm with base foot section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including horizontal and diagonal braces for 1,300 mm frame spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available for larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes horizontal and diagonal bracing for 1,300 mm frame spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Telephone expert advice - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. Materials are sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. Pgodpomhh Dhsfx Adzol The subfloor must be concrete, level, suitable for dowel fixings, and capable of bearing the resulting loads. Customers are responsible for checking and ensuring ground conditions, load capacity, and any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is advised that uprights have at least a 500 mm overhang of the top storage level above the upright’s top edge.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 25/111/615/18, Medium-diameter log cutting line Circular Sawmill - Minimum log diameter: 120 mm - Maximum log diameter: 400 mm - Minimum log length: 1,500 mm - Maximum log length: 3,200 mm - Feed speed: 7.5–24 m/min - Main motor power: 75 + 90 kW - Saw blade diameter: 600 mm Podpfx Aevdtzqodzjgl Multi-rip Saw WP210 - Maximum cutting height: 210 mm - Minimum cutting height: 30 mm - Maximum cutting width: 500 mm - Minimum cutting length: 1,500 mm - Feeding speed: 5–25 m/min - Main electric motor power: 2 x 75 kW - Saw blade diameter: 350 mm The line includes: - Log feeder PK2200 - Cant roller conveyor - Chain circular sawmill TT5/600/400 G - Operator control panel - Roller table with side and slab discharge mechanism - Powered roller table, 4 m - Reference roller table SB4000 - Multi-rip saw WP210 - Belt conveyor, L = 25,000 mm For more information, please contact us via the provided email address or by phone. Line demonstration available Monday to Friday from 08:00 to 16:00.