Aukštas mikroautobusas MERCEDES-BENZ Sprinter 516 CDI KASTEN MAXI SORTIMO RWD/AHK3,5t

Skambinti

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized Hjdpfx Ash Ek Dajlwjt - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Sunkiasvorė lentyna
Kragarmregal einseitig Höhe: 4.200 mmNutztiefe: 1.200 mm / Länge: 4.000 mm

Mažas skelbimas

Sunkiasvorė lentyna Kragarmregal einseitig Höhe: 4.200 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Bad Feilnbach

1 160 km

1 990 €

Skambinti

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments Hjdpfx Asmhhypslwet - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Konsolinis stovas
Kragarmregal doppelseitig Höhe 3.500 mmTiefe je Seite 1.200 mm / Länge 4.000 mm

Mažas skelbimas

Konsolinis stovas Kragarmregal doppelseitig Höhe 3.500 mm Tiefe je Seite 1.200 mm / Länge 4.000 mm

Bad Feilnbach

1 160 km

3 130 €

Skambinti

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking Used: Hot-dip Galvanised Bolted System Scope of Delivery: - 4 double-sided uprights, height 3,500 mm, each with 1,200 mm base plates - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre-to-centre distance - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed Description: - Robust steel construction made of IPE sections - Surface of all components hot-dip galvanised - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, each with 1,200 mm depth, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. The material is properly packaged to enable easy unloading. Hodpfx Alemkixwswot When installed outdoors, load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, suitable for dowelling, and able to absorb the applied loads. Floor structure and load-bearing capacity, as well as any necessary official approvals, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Trijų pusių savivartis sunkvežimis
MANTGM 18.320 4X4 BB Krankipper Palfinger PK 12.501

Mažas skelbimas

Trijų pusių savivartis sunkvežimis MAN TGM 18.320 4X4 BB Krankipper Palfinger PK 12.501

Bobenheim - Roxheim

1 220 km

169 800 €

Skambinti

Būklė: naudotas, rida: 250 km, galia: 235 kW (319,51 AG), pirmoji registracija: 09/2025, kuro tipas: dyzelinas, bendras svoris: 18 000 kg, ašių konfigūracija: 2 ašys, spalva: balta, pavaros tipas: automatinis, krovimo vietos ilgis: 4 000 mm, krovinių skyriaus plotis: 2 450 mm, krovos erdvės aukštis: 600 mm, Įranga: ABS, kranas, oro kondicionavimas, suodžių filtras, visų varančiųjų ratų pavara,

Sunkiasvorė lentyna
Kragarmregal einseitig Höhe: 3.500 mmNutztiefe: 1.200 mm / Länge: 4.000 mm

Mažas skelbimas

Sunkiasvorė lentyna Kragarmregal einseitig Höhe: 3.500 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Bad Feilnbach

1 160 km

2 170 €

Skambinti

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Racking Used: Bolted System, Hot-Dip Galvanised Version Scope of delivery: - 4 upright frames, height 3,500 mm with base foot section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including horizontal and diagonal braces for 1,300 mm frame spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available for larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes horizontal and diagonal bracing for 1,300 mm frame spacing Hsdpfomhh Dhsx Alwst - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Telephone expert advice - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. Materials are sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixings, and capable of bearing the resulting loads. Customers are responsible for checking and ensuring ground conditions, load capacity, and any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is advised that uprights have at least a 500 mm overhang of the top storage level above the upright’s top edge.

Plieniniai laiptai
StahlHöhe 2140 mm Geländer beidseitig

Mažas skelbimas

Plieniniai laiptai Stahl Höhe 2140 mm Geländer beidseitig

Wiefelstede

1 046 km

950 €

Skambinti

Būklė: geras (naudotas), Plieniniai laiptai, lauko laiptai, prijungiami laiptai - Plieniniai laiptai: prijungiami laiptai su grotelinėmis pakopomis ir turėklais abiejose pusėse - Plotis: 880 mm - Pakopų tarpai: apie 200 mm - Aukščiausios pakopos aukštis: 1940 mm Hodpfxjrg Ivbj Alwet - Transportavimo matmenys: 3880/880/A970 mm - Svoris: 150 kg

Trijų pusių savivartis sunkvežimis
MANTG-S 18.360 4x4 BL 2-Achs Allradkipper Kran Funk

Mažas skelbimas

Trijų pusių savivartis sunkvežimis MAN TG-S 18.360 4x4 BL 2-Achs Allradkipper Kran Funk

Peine

949 km

79 900 €

~~84 900 €~~

Skambinti

Būklė: naudotas, rida: 237 089 km, galia: 265 kW (360,30 AG), pirmoji registracija: 03/2016, kuro tipas: dyzelinas, bendras svoris: 18 000 kg, ašių konfigūracija: 2 ašys, kita apžiūra (TÜV): 02/2026, spalva: raudona, pavaros tipas: mechaninis, emisijos klasė: Euro 6, krovinio erdvės tūris: 6 m³, krovimo vietos ilgis: 4 200 mm, krovinių skyriaus plotis: 2 420 mm, krovos erdvės aukštis: 600 mm, Įranga: ABS, kranas, navigacijos sistema, visų varančiųjų ratų pavara,

Padėklų stelažai Aukštų lentynų stelažai
Hovuma/ 11,95 lfm/ Ständer:6.640 x 870 mm/ Traverse: 2.880 mm

Mažas skelbimas

Padėklų stelažai Aukštų lentynų stelažai Hovuma/ 11,95 lfm/ Ständer: 6.640 x 870 mm/ Traverse: 2.880 mm

Neukamperfehn

1 080 km

1 986 €

Skambinti

Būklė: geras (naudotas), Technical Data for the Pallet Racking System: Racking System: Hovuma Technical Data for the Installation: Number of rack rows: 01 unit Length per rack row: approx. 11,945 mm Number of bays per rack row: 04 units at 2,880 mm each Number of levels incl. floor level: 04 units Scope of Delivery Includes: 05x Pallet rack uprights, used Material colour: cream white Upright profile: 85 x 50 x 17 x 3.0 mm Upright type: C 808 S275 Hodpfx Alji D Em Aowjt Including cross and diagonal braces, foot plates The uprights are pre-assembled (welded framework) Height: 6,640 mm Depth: 870 mm 32x Pallet rack beams, used Material colour: green INP profile: 80 x 42 mm Clear span: 2,880 mm Max. load per pair of beams: 1,600 kg with uniformly distributed load 64x Locking pins, used Design: fully galvanized For securing the beams against accidental lifting 20x Heavy-duty anchors, new Manufacturer: MKT Design: zinc-plated steel Approved for: non-cracked concrete Through-fixing: M 12-13/95 10x Shims, used Design: fully galvanized For levelling the rack uprights installed on uneven floors 01x Load sign With details of bay and compartment loads, manufacturer and commission number Dimensions: 80 x 220 mm

Sunki pramoninė lentyna
BITOP4

Mažas skelbimas

Grammetal

963 km

4 950 €

EXW VB plius PVM

Skambinti

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, keliamoji galia vienai sandėliavimo sekcijai: 3 000 kg, lentynos aukštis: 7 500 mm, atrama ilgis: 2 700 mm, lentyna ilgis: 28 320 mm, keliamoji galia: 3 000 kg, bendras svoris: 12 000 kg, rėmo aukštis: 7 500 mm, Parduodama aukštos kokybės BITO lentynų sistema – patikrinta, pilna ir paruošta nedelsiant naudoti. Techniniai duomenys: • Rėmo aukštis: 7 500 mm • Naudingas lentynos plotis: 2 700 mm • Lentynos apkrova: 3 000 kg • Sekcijos apkrova: 12 000 kg • Stulpai: BITO P4 – 7 500 × 1 100 × 120 mm • Skersiniai: BITO PT120M – 2 700 × 120 mm Komplektacija: • 11 × stulpų rėmai • 80 × skersiniai • Įskaitant kaiščius, fiksavimo kaiščius ir priedus Pristatymas ir montavimas pagal pageidavimą – visoje Vokietijoje. Idealiai tinka sandėliams, logistikos centrams, gamykloms ar prekybos įmonėms. Aukštos kokybės BITO produkcija, vieno iš pirmaujančių sandėliavimo įrangos gamintojų. Kokybiška lentynų sistema už prieinamą kainą, palyginti su brangia nauja įranga. Jei domina, susisiekite – pagal užklausą galima įsigyti didesnius kiekius ir skirtingų matmenų. Hodszqv A Hopfx Alwjt

Didelių gabaritų sandėlis Padėklų stelažų statramsčiai
Meta (Thyssen) Multipal SAbm.: 7.000 x 500 mm

Mažas skelbimas

Didelių gabaritų sandėlis Padėklų stelažų statramsčiai Meta (Thyssen) Multipal S Abm.: 7.000 x 500 mm

Neukamperfehn

1 080 km

193 €

Skambinti

Būklė: geras (naudotas), Techniniai duomenys apie padėklų lentynos stelažą: Lentynų sistema: META (Thyssen) Tipas: Multipal S Komplektacijoje yra: 01x padėklų lentynos stelažas, naudotas Medžiagos spalva: sendzimiruotas cinkuotas Stelažo tipas: SR 85|20 Profilio matmenys: 85 x 75 x 2,0 mm Įskaitant skersines ir įstrižaines, stelažo apsaugas ir pagrindo plokštes Stelažai yra surinkti iš anksto (varžtais sujungta konstrukcija) Aukštis: 7.000 mm Hodpfx Aljyz Tczowst Gylis: 500 mm Jūsų kontaktai mūsų įmonėje: P. Andre Evering P. Mario Klöver P. Falk Deutsch Bendroji informacija apie prekę: Ši prekė siūloma tik atsiimti vietoje. Jei pageidaujama transportuoti ar išsiųsti šią prekę, tai susiję su papildomomis išlaidomis, kurios gali būti nurodytos atskirai pagal pristatymo vietą ar pristatymo apimtį.