Rėmo presas

MAWEG RPV

Sąlyga: naujas, Working width: 381 mm Working height: 150 mm Main motor: 7.5 HP, 3-phase Cedpfxsk Rit Ne Admjrk Feed motor: 1/4 HP Feed speed: 6.2 m/min Abrasive belt size: 405 x 1372 mm Machine dimensions: 1000 x 730 x 1680 mm Packing dimensions: 750 x 830 x 1900 mm Net/Gross weight: 450/500 kg You can call or write to us. We can speak and write in German and Russian. You may also send messages in English. 34.4.4.

Sąlyga: naudotas, Working width: 4000 mm Working height: 2600 mm Number of pressing cylinders: 6 pcs. Dimensions (L/W/H): 5300 x 1250 x 3330 mm S&S Frame Press Type RP 2000, ----- CE version Robust frame construction made of thick-walled special hollow sections, sliding carriages and pressure beams with 50 mm hole grid. Continuous left-sided abutment for width pressing, lower abutment in two levels. Vertical press cylinders on special pressure beams with single-hand rapid adjustment and counterbalancing, height adjustable in 50 mm increments, long sliding carriages guarantee the long-term absorption of high pressing forces. Quick, smooth width adjustment via ball-bearing guided trolley with central locking, fixation in 50 mm increments. Upper horizontal pressing cylinder infinitely height-adjustable and equipped with weight compensation. Lower horizontal pressing cylinder with centering bores for both abutment levels, with weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Machine is electro-hydraulically controlled, with 2 pcs. vertical press cylinders d = 50 mm, stroke 120 mm, double-acting, with counterbalancing and single-hand quick adjustment; 2 pcs. horizontal press cylinders d = 40 mm, stroke 120 mm, double-acting, with counterbalancing; 2 manual control valves, manometer, 1 pressure regulator valve from 20 to 125 bar (corresponds to 400 to 2400 kg pressing force vertically), with 3 kW three-phase motor for 400 Volt, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working area: 4000 mm x 2600 mm (length x height) Required floor space: 5300 x 1250 x 3330 mm (L x W x H) Machine includes the following options: ----- Article ,00 pcs Central pressure beam with double-acting press cylinder, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article ,00 pcs Individual pressure regulation for central pressure beam, pressure regulation range up to max. 100 bar (for pressing cross-bar windows) Article ,00 pcs Lateral pressure device complete with double-acting press cylinder, weight compensation, pressure hose and shut-off valve; weight compensation on lower horizontal cylinder omitted Article ,00 pcs Individual pressure regulation for lateral pressure device, pressure regulation range up to max. 100 bar (for pressing cross-bar windows) Article ,00 pcs Shut-off valve on 3rd vertical cylinder Article ,00 pcs Shut-off valve on upper horizontal cylinder Article ,00 pcs Width compensation insert for pressing small frames to bridge the 1st pressure beam, including shut-off valve at 1st vertical cylinder Article ,00 pcs Basic equipment for counter-profile Required height increases by 100 mm Article All pressure plates and abutments covered with plastic Article ,00 pcs Triangular studio window press device consisting of locking device for vertical pressure beam and 3 attachable, side-guided pendulum pressure plates Article ,00 pcs Double pendulum pressure plate for pointed windows (triangle) ----- Cedpfou Uvalsx Admork Total price in above configuration ex works: On request! -----

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Chain mortising machine with additional unit, consisting of two horizontal milling cutters for producing the handle and keyholes, and two adjustable, motorized, swiveling drilling units for creating slots. Vertical working unit: - Maximum workpiece thickness: 230 mm - Maximum workpiece height: 710/1050 mm - Vertical stroke length: 150 mm - Horizontal stroke length: 300 mm - Traverse head stroke: 80 mm - Head tilt: +/- 45 degrees - Vertical spindle stroke: 250 mm - Unit swivels +/- 45 degrees - Motor power: 2.2 kW, 400V, 50 Hz Horizontal working unit: - Number of drilling units: 2 - Min./max. longitudinal stroke: 80/130 mm - Manual travel: 140 mm - Pneumatic transverse stroke: 140 mm - Drill motor power: 0.18 kW, 400 V, 50 Hz - Router motor: 1.8 kW, 400V, 50 Hz Weight: approx. 650 kg Includes pump for automatic chain lubrication Includes tools Includes manual Crsdpfx Aslpcffodmok Note on used machines: • Technical data and prior sale subject to change. • Stated prices are ex-location, loaded free of charge! • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Sąlyga: naudotas, Plandeka storica con banco da 300 mm, altezza massima 150 mm, usata, collaudata Codpfx Ajivur Rsdmerk

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1962, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7867/162, Power connection: 400V, 4.0 kW Csdpfx Aeh Ux Rwjdmsrk Extraction port: 1x Ø 100 mm, 1x rectangular 300x140 mm Spindle diameter: 30 mm Height adjustable via handwheel Spindle brake by cable pull Spindle lock by detent pin Forward/reverse operation 2 speeds Spindle non-tilting Dimensions (LxWxH): 1060 x 960 x 1100 mm Weight approx. 650 kg Unfortunately, we cannot respond to inquiries without complete contact details.

Sąlyga: naudotas, Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, darbinio aukščio: 2 400 mm, darbinis plotis: 3 500 mm, galia: 1,5 kW (2,04 AG), 3 verticale, 2 seitliche Druckzylinder. Zustand: funktionsgeprüft, sehr gut, gebraucht. Credpfew Hlt Nsx Admjk

Sąlyga: naudotas, Tenon and mortise machine, tenon cutting machine, tenoning machine, slotting rotor, tenon cutting and slotting machine, slot and tenon milling machine Csdpfof D H E Nex Admork - Manufacturer: Festo, tenon cutting and slotting machine - Type: ZA 101/S - Technical data: see nameplates/photos - Dimensions: 1675/1545/H1330 mm - Weight: 546 kg

Sąlyga: geras (naudotas), Technical Data for Pallet Rack Upright: Racking System: Mecalux Included in the delivery: 01x pallet rack upright, used Material color: blue Frame type: M-81 Frame profile: 80 x 70 x 2.00 mm Including horizontal and diagonal braces, base plates The uprights are pre-assembled (bolted truss structure) 8,000 mm high 1,100 mm deep Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Csdpfjmmcd Njx Admork This item is offered for pick-up only. Any additional transport or shipping of this item will incur extra costs, which can be determined individually depending on the place of delivery or scope of delivery.

Sąlyga: naudotas, incl. various slot and tenon discs used, good condition Brand: Festo Type: ZA 101 Machine No.: 2668/S Number of spindles: 3 + cut-off saw Clamping height: 1 x 140 mm + 2 x 30 mm Cut-off saw: 2.5 HP Cjdpjvwffzsfx Admsrk Stop rule LAS 1750 mm + 1000 mm with turret stop Workpiece clamping: pneumatic Space required: approx. 1700 mm x 700 mm x 1400 mm Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition, as inspected without guarantee or warranty

Sąlyga: naujas, Gamybos metai: 2017, Exhibition machine Year of manufacture: 2017 Cjdpfxekwg Szo Admerk (not yet used in production) The Compact Star is a pneumatic gluing star with 5 gluing levels. The rotational movement is powered by a pneumatic drive with a safety locking system. Each level is equipped with 4 adjustable vertical clamps featuring adjustable counter-bearings. Each vertical clamp is fitted with a hold-down rail. Additionally, each level has 2 adjustable horizontal pressure beams with counter-bearings. Maximum clamping dimensions: Vertical: 960 mm Horizontal: 1335 mm Material thickness: 50 mm Dimensions: Length: 2,700 mm Width: 3,117 mm Height: 3,096 mm Availability: Short-term Location: Röllbach