Krautuvas sumontuotas ant sunkvežimio

MAN TGX 26.440 * FASSI F455A.2.26E + FUNK + Anhänger

Sąlyga: naujas, The Sany SY50U excavator is particularly well-suited for use in confined spaces. Its robust design and excellent performance specifications make this machine ideal for all earthmoving and road construction projects. - Quiet, low-vibration engine - Efficient, powerful load-sensing hydraulic system - Clear instruments and large, high-resolution color display - Optimal visibility - Low weight and compact dimensions - Sany five-year warranty Lhjdpfx Abjglp Nfjker

Sąlyga: naudotas, rida: 122 196 km, Gamybos metai: 2017, veikimo valandos: 8 592 h, Pavara: ratas Tuščias svoris: 26 000 kg Kėlimo galia: 40 000 kg Serijos numeris: 256086 Priekinių padangų būklė: 70 Galinių padangų būklė: 70 Transportavimo matmenys (I x P x A): 10,7 x 2,55 x 3,4 m Dėl daugiau informacijos kreipkitės į PFEIFER GROUP. Lhsdpfxjw Uchxj Abker

Gamybos metai: 2020, Sąlyga: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Lhjdpsfz U S Eofx Abker Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Sąlyga: naujas, Gamybos metai: 2025, bendras plotis: 1 000 mm, bendras ilgis: 1 600 mm, bendras aukštis: 950 mm, galia: 1,5 kW (2,04 AG), Stogo dangos profiliavimo staklės F3-27 su spaustuko įspaudimu UAB „Evolutioner“ sukūrė stogo dangos profiliavimo stakles F3-27 su spaustuko įspaudimu metalinių stogų dvigubo falco profilio gamybai. Dvigubo falco stogas plačiai naudojamas įvairių pastatų ir statinių statyboje, senų namų bei architektūrinių objektų rekonstrukcijoje. Falcinė danga stogui suteikia išskirtinę išvaizdą, pabrėžia unikalumą ir estetinį dizainą. Šiuolaikinėje statyboje falciniai skardos skydai dažnai naudojami ne tik stogams, bet ir įvairių pastatų fasadų apdailai. Stogo profiliavimo mašina F3-27 leidžia gaminti reikiamo ilgio metalinius stogo lakštus – profiliavimo ilgio ribojimų nėra. Įrenginys yra pakankamai lengvas, todėl jį galima naudoti tiesiogiai statybos objekte ir formuoti paneles vietoje. Tokiu būdu išvengiama baigtinių skydų transportavimo nuo gamyklos iki montavimo vietos, sumažinant galimų pažeidimų riziką ir transportavimo kaštus. Techninės savybės: profiliavimo ilgis – neribotas; formavimo žingsnių – 7; falco aukštis (mm) – 27 Metalinių stogo lakštų gamybos staklės F3-27 yra su lengvai reguliuojama pločio sistema – skydelio pločio reguliavimui tereikia pasukti specialų ratuką. Papildomos F3-27 profiliavimo įrangos parinktys: - skersinio pjovimo peilis; - ilgio matavimo įrenginys; - profiliavimui sustandinančius volelius; - lenktų panelių volelius; - rankinius falco sujungimo įrankius; Lodpfx Absp Stgnokehr - elektrinį falco užspaudimo įrenginį ESM-1; - slankiojančių spaustukų formuotojus; - fiksuotų spaustukų formuotojus; - grindų ritinį-dekoilerį; - suprofiliuotų panelių įrangą RPFM; - automatinį žirklių bei valdymo rinkinį; Nešiojamos F3-27 stogo dangos profiliavimo staklės turi šešias formavimo volelių poras, skirtas 27 mm aukščio profiliui ir papildomą stendą su spaustuko įspaudo formavimui. Spaustuko įspaudimas – tai specialus lenkimas ant panelės, skirtas paslėpti slankiojančius ar fiksuotus spaustukus po ja. Šie spaustukai naudojami stogo panelių tvirtinimui prie stogo konstrukcijos. Taip pat gaminame šias metalinių stogo lakštų profiliavimo stakles: - dvigubo falco metalinės stogo dangos profiliavimo staklės F3; - stogo dangos profiliavimo staklės F3-9 su spaustuko įspaudimu; - snap lock tipo stogo dangos profiliavimo įranga SL-1; - automatinės snap lock profiliavimo staklės SL-1 auto.

Sąlyga: naudotas, Gamybos metai: 2021, veikimo valandos: 831 h, Įranga: ABS, Doosan DX 55-9C * Operating weight: 5.5 t Lhedpfx Abjullmdoker * Transport length: 5.85 m * Transport width: 1.88 m * Transport height: 2.56 m * Bucket capacity (min.): 0.18 m³ * Track width: 400 mm * Operator protection: Kb (cabin) * Reach: 6.15 m * 2 x proportional control * Powertilt with Lehnhoff system * Air conditioning * ZLG 5500 kg * Engine: 41 kW / 56 hp * Blade support

Sąlyga: paruoštas naudoti (naudotas), Įranga susideda iš: 1 - Ritės nuvyniojimo bokštas su 4 nuvyniotuvais (AG 3000 a) kiekvieno nuvyniotuvo talpa: 3 t svirties ilgis: 1350 mm maksimali greitis: 25 m/min, reguliuojama dažnio keitikliu 2 - Ritinėlių selektorius (MT-4 1250) min.: 150 mm maksimali greitis: 25 m/min, reguliuojama dažnio keitikliu 3 - Tiesinimo blokas (RM-4 1250) min.: 150 mm maksimali greitis: 25 m/min, reguliuojama dažnio keitikliu 4 - Pjovimo blokas (TS 1250 + KST-2) min.: 150 mm maksimali greitis: 25 m/min, reguliuojama dažnio keitikliu Lhjdpfjxqh Sasx Abker 5 - Schechtl giljotininės žirklės pjovimui pagal išmatavimus su Siemens Touch CNC valdymu 1250 x 2 mm

Sąlyga: naujas, Table width 3000 mm Table length 1500 mm Torch heads 1 Control CNC Feed rate 20,000 mm/min Total power requirement 15 kVA Space requirement approx. 4.5 x 2.5 m * Heavy machine bed with precision guides for smooth machine travel * Cross carriage with ball bearings, offering height adjustment with 400 mm vertical stroke * Thermal separation of drive and cutting area ensures maximum precision * Automatic height detection and torch height control during cutting * Torch holder with collision protection and automatic shut-off in case of collision * Installation or relocation of the machine possible via plug & play method using forklift, pallet truck, or crane * 3-sided access to cutting area thanks to cantilever design SATOTEC Extraction Table: The SATOTEC table system features a robust table construction for a maximum cutting thickness of 150 mm. For cutting workpieces up to 150 mm thick, oxy-fuel cutting technology is required. The workpiece support frame is equipped with replaceable 3 mm flat-bar slats, mounted at a 45° angle. The spacing between the slats is 50 mm. Power Source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm, both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, can be increased with ProPierce Technology * Marking, grooving, and scribing of coated metallic materials * Inverter power source with digitally managed, fully electronic process cycle * Integrated cooling system with semi-automated filling and draining Gas Control: Fully automatic, processor-controlled plasma universal gas console Q-Gas for cutting all metals Lhsdpfx Abspm U U Nekor Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction System TEKA EcoCube 5.5 kW Filter medium: dry, fat-free or oil-free dust / fumes Filter area: 100 m² (4 cartridges @ 25 m² each) Filter cartridge: BIA M, Type Nano Separation efficiency: 99% (per BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan capacity: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz Current consumption: 11.5 A Voltage type: 3Ph+N+PE Fan installation: on the unit, incl. silencer duct bend, right side Motor control: frequency inverter Noise level: 75dB(A) + max 10 dB(A) during cleaning pulse Intake nozzle: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: light grey - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Closing hooks and toggle latches - Compressed air connection and condensate drain each fitted with cable gland - Compressed air connection with hose nozzle d=8mm - System equipped with grounding bolt - Cables in UL version - EATON frequency inverter installed on the left in attached control cabinet

Gamybos metai: 2020, Sąlyga: naujas, The Sapphire is the optimal solution for heavy industry applications with material thicknesses up to 200 mm. It is highly popular among various manufacturers—often operating three-shift systems—as well as in all application areas where stability, efficiency, and process reliability are critical. Thanks to its premium configuration, this machine is a universal tool for the highest demands and a valuable aid for process optimization. With over 400 units installed worldwide, the Sapphire cutting system proves itself daily in industrial operations. Equipment - Harris oxy-fuel torch - Kjellberg plasma torch with e-touch - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for easier positioning - CamConcept Finest Cut V7 - Extraction table 3000 x 6000 mm - PFC 6 extraction system incl. ductwork - Delivery, installation, and commissioning Key Features • High dynamics and precision in automated 2D & 3D cutting of plates, pipes, and profiles • Plate processing up to 200 mm material thickness • Extensive cutting database for optimal user-friendliness • Engineered for demanding conditions in 24/7 three-shift operation General Technical Data Drive: Servo AC Available working widths: 2,000–7,000 mm Available working lengths: from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy: DIN-EN 28206 Safety module: DIN-EN 13850 Repeatability: DIN-EN 28206 Working table height: 740–760 mm Lhsdef Ak N Rjpfx Abksr Operating ambient temperature: +5°C to 45°C Operating humidity: max. 90%

Sąlyga: naujas, Gamybos metai: 2025, The Forstner POWER STRAIGHT PRO is the heavy-duty version of the STRAIGHT PRO. Even more robust straightening rolls ensure perfect levelling results even with thicker sheets. The straightening unit, equipped with six straightening rolls, is easy to adjust and guarantees flat blanks for further production, regardless of material type. Key advantages: - Very robust construction - 6 straightening rolls with automatic adjustment - Perfect levelling results - Easy-to-operate machine Standard equipment: Roller inlet funnel Feed table Lhodpfjurtg Sex Abkjr Cross-cutting guillotine Touch control panel Speed: 25 m/min Max. straightening and cutting capacity: 2.00 mm at 400 N/mm² or 1.5 mm at 600 N/mm² Optional working width of 1524 mm also available

Sąlyga: naujas, Product Description: Lodsdy Ewljpfx Abkohr Conveyor systems are one of the most crucial components used in automatic coating lines. Our conveyor systems play a key role in transporting parts to be painted, covering distances measured in meters per day and kilometers per year. Heavy parts to be coated are conveyed by belt systems that operate for many years thanks to their durable bearings and cast steel chains. The load capacity ranges from 120 kg up to 2 tons. • The operating principle of this conveyor type is based on the transfer of suspended materials by chains and trolleys, which move along an NPI-profile with the aid of a drive unit. • WEBB-type conveyor chains are made of spheroidal cast iron or forged steel and subsequently heat-treated. • Special roller bearings for the trolleys can operate at temperatures up to 200 °C. Lubricating greases on the trolley bodies provide continuous lubrication for the system. • The drive system can be built on either a crawler or a gear system basis, equipped with safety switches and traveling trolleys. • The conveyor speed can be easily adjusted using a frequency inverter. • The chain tensioning system consists of slides and springs. Rollers and support wheels are used for belt turns.