Wostor Gmbh Euromarker Basic 150 pirkti naudotą (74 901)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Mažas skelbimas
Au am Rhein
1 270 km
Adatų žymėjimo sistema
Wostor GmbHEuromarker basic 150
Skambinti
Būklė: naudotas, Funkcionalumas: nepatikrintas, Wostor Euromarker basic 150
Iiedpew U Ir Nsfx Aausa
- Varžto rankena sulūžusi ir šiek tiek išlenkta
- Pristatymas galimas už papildomą mokestį
Mažas skelbimas
Großenlüder
1 087 km
Smėliavimo konteineris smėliavimo įrenginiui
Oliver Fritz GmbH & Co. KGSandstrahlcontainer High Cube Basic
Skambinti
Būklė: naujas, Gamybos metai: 2025, Blasting Container High Cube Basic with Sweeping Floor
Shovel Hopper for approx. 4 pressure vessel fills + blast kettle fill, allowing for long blasting sessions without refilling.
Type SC.20FHC.5800 Basic
Standard features – ready to operate: (Just add blasting media, connect power and compressed air)
1x Control cabinet with emergency stop, Siemens Logo
1x Pressure blasting vessel
1x Pressure regulator and water separator
1x Blast hose DN 25 with 8mm blast nozzle
1x Remote control with dead man’s switch
1x Feed chute/bunker for blasting media
1x Blasting media sieve + collection container for coarse particles
1x Vertical separator for blast dust extraction (reduces dust during blasting)
1x Filtration unit with pre-chamber separator
Iijdow Ivk Tepfx Aauea
1x Extraction wall as louvre-type impact separator
1x Rubber wall cladding 4mm with tissue reinforcement
1x Tear plate floor 3/5
1x LED lighting
1x Emergency lighting, door end switch, emergency stop
1x Breathing air filter
1x Blasting helmet
1x Blasting gloves
1x Suit
Options:
- Side Door Open, container can be fully opened on the side for easy loading via forklift
- Container widening
- Container extension
- Crane roof hatch
- Crane track 500kg
- C-profile rail for powder coaters
- Blast trolley
- Filter with Big Bag
- HEPA post-filter for contaminated dusts, e.g. when blasting stainless steel
- Stainless steel tear plate floor for stainless blasting
- Aluminium tear plate floor
and much more on request!
Mažas skelbimas
Elz
1 188 km
CNC plazminis pjaustytuvas be vamzdinio lazerio
Sommer Maschinenbau GmbHRohrplasmaschneider Dragon 150
Skambinti
Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Plasma cutting system for pipes and profiles
Machines for plasma cutting of pipes and profiles. The cutting contour is defined and created via CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be easily selected using the 12" touch display. After manually loading the workpiece, the automatic cutting process is started.
- Maximum pipe length: 6000 mm
- For round pipes up to max. OD = 150 mm
- For square tubes up to max. 101.6 x 101.6 mm (4" x 4")
- Maximum pipe weight: 150 kg
- 4-jaw chuck
- Side loading possible, protected by light curtain
- Fully automatic cutting process
- Industrial PC control with 12" touch display
- Data import via USB and LAN
- Power supply: 400V 3-phase, 2 kW
- Dimensions: 690 x 100 x 180 cm
- Weight: approx. 800 kg
Made in Germany
The images show an older, larger machine.
Ijdjg Dvdcspfx Aausia
Mažas skelbimas
Elz
1 188 km
CNC plazminis pjaustytuvas be vamzdinio lazerio
Sommer Maschinenbau GmbHRohrplasmaschneider Dragon 150
Skambinti
Būklė: naudotas, Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Plazminio pjovimo įrenginys vamzdžiams ir profiliams
Mašinos, skirtos vamzdžių ir profilių plazminiam pjovimui. Pjovimo kontūras nustatomas ir sukuriamas naudojant CAM programinę įrangą. Sukurtas CNC kodas vėliau perduodamas į įrenginį per USB arba tinklą. Programą galima lengvai paleisti per 12" lietimui jautrų ekraną. Įstačius ruošinį rankiniu būdu, pradedamas automatinis pjovimo procesas.
- Vamzdžio ilgis: maks. 6000 mm
- Apvaliems vamzdžiams iki maks. išorinio skersmens 150 mm
- Kvadratiniams vamzdžiams iki maks. 101,6x101,6 mm (4"x4")
Iijdpfex Ebzqjx Aauoa
- Maksimalus vamzdžio svoris: 150 kg
- 4-žandikaulių griebtuvas
- Šoninis užkrovimas galimas, apsaugotas šviesos užuolaida
- Pilnai automatinis pjovimo ciklas
- Pramoninis kompiuteris su 12" lietimui jautriu ekranu
- Duomenų importas per USB ir LAN
- Mašinos energijos suvartojimas: 400V, 3 fazės, 2KW
- Matmenys: 690x100x180 cm
- Svoris: apie 800 kg
Pagaminta Vokietijoje
Nuotraukos rodo panašią mašiną
Mažas skelbimas
Allendorf (Eder)
1 114 km
Ilgas juostinis šlifuoklis
KBM Maschinenbau GmbHM2S92-150
Skambinti
Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, galia: 5,5 kW (7,48 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, šlifavimo juostos plotis: 150 mm, šlifavimo juostos ilgis: 9 000 mm, aukščio reguliavimo tipas: elektrinis, šlifavimo juostos greitis: 25 mm/s, bendras aukštis: 2 200 mm, bendras ilgis: 4 640 mm, bendras plotis: 2 650 mm, bendras svoris: 1 200 kg, šlifavimo ilgis: 2 500 mm, ruošinio svoris (maks.): 80 kg, ištraukimo jungties skersmuo: 180 mm, šlifavimo plotis: 950 mm, sukimosi greitis (maks.): 1 435 aps./min, reikalingas aukštis: 2 200 mm, vietos reikalavimas ilgis: 4 640 mm, reikalingas plotis: 2 650 mm, stalo aukščio reguliavimas: 500 mm, Įranga: dokumentacija / vadovas, Wide Belt Sander M2S92-150 with two sanding belts for manual grinding, matting, and polishing. Designed for processing steel, stainless steel, and brass.
Not suitable for aluminum or titanium!
Scope of delivery includes:
Iisdpfov S Sr Rex Aausa
- Machine stand with connecting elements
- Belt drive
- Pneumatic belt tensioning and manual belt tracking adjustment
- Sanding unit with contact roller, manually shiftable from belt 1 to belt 2
- Electric table lift
- Flat machine table
- Workpiece stop rule on the machine table
- Initial set of abrasive belts
- CE-compliant
- Operating manual + manufacturer's declaration according to Annex 2
This robust machine in a welded steel construction ensures exceptionally smooth operation. The two machine stands are designed with shaped sections, enabling processing of long workpieces. The three-roller belt guidance provides the operator with the largest possible open working area, facilitating convenient hand block sanding. The belt drive is via a three-phase motor with a dynamically balanced drive roller. Each belt is equipped with individually adjustable pneumatic tensioning, ensuring optimal belt tension for each unit. The dust extraction system is dimensioned to efficiently capture sanding dust and direct it to the extraction port when connected to a suitable extraction unit. For effortless operation, the sanding unit is mounted in backlash-free roller guides. The machine table is smoothly and quickly adjustable in height using the electric table lift. The table lift guides are maintenance-free. For loading, the table can be extended far enough to allow easy placement of workpieces without having to slide them under the sanding belt. All primary machine controls are user-friendly and centrally located on the front of the machine.
Machine color:
RAL 9001 cream white and RAL 5003 sapphire blue
Control cabinets and small enclosures in "Light Grey"
The standard machine comes equipped with two initial abrasive belts (W x L) 150 x 9000 mm and a contact roller, approx. 50° Shore hardness, for 150 mm belt width.
Additional equipment:
3-axis table with integrated handling device for rotating and swiveling workpieces.
The handling device is mounted at the center of the table, below the insert frame. For operation, the insert frame is removed from the machine table. The handling device features four vacuum suction pads for securing workpieces and consists of: the bearing with rotary axis, featuring a brake disc at the rear. The swivel mechanism is mounted at the front of the rotary axis and can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. The swivel head has an additional indexing disc for precise positioning of workpieces to the sanding belt. The rotary and swivel axes are released pneumatically via foot switch; rotary axis movement is manual.
Workpiece weight when using as a flat table with insert frame installed = 80 daN
Workpiece weight when using the handling device, based on the clamping plate = 25 daN, or 120 Nm relative to the center of the rotary axis.
Mažas skelbimas
Allendorf (Eder)
1 114 km
Ilgas juostinis šlifuoklis
KBM Maschinenbau GmbHMS93-150
Skambinti
Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, galia: 5,5 kW (7,48 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, šlifavimo juostos plotis: 150 mm, šlifavimo juostos ilgis: 7 000 mm, aukščio reguliavimo tipas: elektrinis, bendras aukštis: 2 200 mm, bendras ilgis: 3 550 mm, bendras plotis: 2 000 mm, bendras svoris: 870 kg, šlifavimo ilgis: 1 500 mm, ruošinio svoris (maks.): 80 kg, ištraukimo jungties skersmuo: 180 mm, šlifavimo plotis: 950 mm, sukimosi greitis (maks.): 1 435 aps./min, reikalingas aukštis: 2 200 mm, vietos reikalavimas ilgis: 3 550 mm, reikalingas plotis: 2 000 mm, stalo aukščio reguliavimas: 500 mm, Įranga: dokumentacija / vadovas, Belt Grinding Machine MS92-150 3-roller redirected abrasive belt 150x7100
For manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass.
Scope of delivery includes:
- Machine base with connecting elements
- Continuously variable belt drive
- Pneumatic belt tensioning and manual belt tracking adjustment
- Grinding unit with contact roller
- Electric height-adjustable table
- Flat machine table
- Workpiece stop ruler on the machine table
- Initial equipment abrasive belt
- Operating instructions + manufacturer’s declaration
- CE-compliant design
The robust machine frame made of welded steel construction ensures extremely quiet operation. The two machine bases have an offset to allow sanding of workpieces longer than the machine table. The abrasive belt runs over 3 deflection rollers, providing a maximally accessible working area for the operator, ensuring good handling especially with manual sanding blocks. The belt drive is powered by a three-phase motor with a balanced drive pulley. The belt has adjustable pneumatic tension. The dust collection system is adequately sized to capture the resulting grinding dust and channel it to the extraction nozzle, provided it is connected to a suitable extraction system. For fatigue-free operation, the grinding unit is mounted in backlash-free linear guides. The machine table can be quickly and easily adjusted to the correct workpiece height using the electric table lift. The table lifting guide elements are maintenance-free. For loading, the table can be extended so that workpieces do not have to be pushed under the abrasive belt during placement. The electrical controls for the main functions are user-friendly and centrally located on the machine.
Iiodpfstwb U Aox Aauoa
Machine paint:
RAL 9001 cream white and RAL 5003 sapphire blue
Control cabinets and small housings in "light grey"
The basic machine is supplied with one initial equipment belt (WxL) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width.
Optional accessories:
3-axis table with integrated handling device for rotating and swiveling workpieces.
The handling device is mounted centrally under the insert frame. To use the handling device, the insert frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing assembly with the rotation axis, which has a brake disc mounted on the rear. The swivel assembly is mounted on the front of the rotation axis and can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional index plate is mounted on the swivel head to allow fine alignment of the workpiece to the abrasive belt. Unlocking of the rotation and swivel axes is performed pneumatically via foot switches; movement of the rotation axes is manual. Maximum workpiece weight when used as a flat table with insert frame = 80 daN. Maximum workpiece weight when using the handling device (relative to the clamping plate) = 25 daN or 120 Nm (relative to the center of the rotation axes).
Mažas skelbimas
Porta Westfalica
1 033 km
Automobilių plovykla
Laue Cleaning Technology GmbHHTW 1000 Basic
Skambinti
Būklė: naujas, Gamybos metai: 2025, Naujas įrenginys visiškai pagamintas iš nerūdijančio plieno, komplekte:
- Plovimo siurblys
- Automatinis krepšelio pavara
- Mygtukas krepšelio sukimuisi už valymo proceso ribų
- Pakelio dangtis ir sietelio filtras po krepšeliu iš nerūdijančio plieno
- Apsauga nuo sauso veikimo
- Durų saugos jungiklis
- Jungtys plokščių fazių atskyrimui (alyvos atskyriklis)
- Krepšelio vidinis plotis: 975 mm
- Naudingoji aukštis nuo krepšelio iki purkštukų apatinio krašto: 450 mm
- Plokščios srovės purkštukai
Iiodpfxshcpbbe Aauja
- Plovimo slėgis: 3 bar
- Komplekte 20 kg LCT Power Star 50-730
- Pristatymo laikas pagal susitarimą
- 24 mėn. garantija
- Galimas siuntimas
Mažas skelbimas
Porta Westfalica
1 033 km
Automobilių plovykla
Laue Cleaning Technology GmbHHTW 800 Basic
Skambinti
Būklė: naujas, Gamybos metai: 2025, - Naujas įrenginys, visiškai pagamintas iš nerūdijančio plieno, įskaitant plovimo siurblį
- Automatinis krepšelio pavara
- Mygtukas krepšeliui sukti už valymo procedūros ribų
- Nerūdijančio plieno bakelio dangtis ir sietinis filtras po krepšeliu
- Apsauga nuo sauso veikimo
- Durų saugos jungiklis
- Jungtys lėkštiniam fazių separatoriams (alyvos separatorius)
Ijdpfxsffqi Ue Aaujia
- Krepšelio vidinis plotis: 790 mm
- Naudingas aukštis nuo krepšelio iki purkštukų laikiklio apačios: 430 mm
- Plokščios srovės purkštukai
- Plovimo slėgis: 3 bar
- Įskaičiuota 20 kg LCT Power Star 50-730
- Pristatymo terminas - pagal susitarimą
Mažas skelbimas
Porta Westfalica
1 033 km
LCT dalių plovykla
Laue Cleaning Technology GmbHHTW 1200 Basic
Skambinti
Būklė: naujas, Gamybos metai: 2025, - Naujas įrenginys visiškai iš nerūdijančio plieno, įskaitant plovimo siurblį
- Automatinė krepšio pavara
- Mygtukas krepšiui pasukti už valymo procedūros ribų
- Nerūdijančio plieno bako dangtis ir sietinis filtras po krepšiu
- Apsauga nuo sausos eigos
- Durų saugos jungiklis
Iedpfx Asg Hgcwjaueia
- Jungtys plokšteliniam fazių atskyrikliui (alyvos atskyriklis)
- Krepšio vidinis plotis: 1180 mm
- Naudingas aukštis nuo krepšio iki purkštuko apatinio krašto: 675 mm
- Plokščios srovės purkštukai
- Plovimo slėgis: 4 bar
- Grįžtamoji atšaka kaip kondensatorius mažam vandens sunaudojimui
- Įskaičiuota 20 KG LCT Power Star 50-730
- Pristatymo laikas derinamas individualiai
- 24 mėnesių garantija
Mažas skelbimas
Treuchtlingen
1 126 km
Alyvos temperatūros valdymo blokas
Rummel Kunststofftechnik GmbHTEMP2 150 9A SSR
Skambinti
Būklė: naujas, Gamybos metai: 2025, General:
- Maximum temperature range: 150°C for oil (heat transfer fluid)
- Robust sheet steel housing
- Unit mounted on castors
Hydraulics:
- Seal-less immersion pump
- Max. flow rate: 60 l/min - Max. pressure: 3.8 bar
- Tank and heater made of stainless steel
- Heating capacity: 9 kW
- Tank capacity: approx. 20 litres
- Fittings made of brass/stainless steel
- Manual oil filling
- Mechanical level control
- Indirect cooling system (shell and tube heat exchanger)
- Cooling capacity: approx. 40,000 kcal/h
- Pressure gauge
- Bypass
- Solenoid valves for cooling
Ijdpfeddv Itjx Aauoia
Electrics and Control:
- Electronic PCB controller
- Solid state relays
- Safety thermostat
- Sensor break monitoring
- Power cable with plug
Available in approx. 4 weeks!
Mažas skelbimas
Tarnock
1 824 km
Mėsos perdirbimo mašina
Glass GmbHVSM 150 Mixer Marinator
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, 1 x GLASS GmbH Mischer-/Mariniergerät für empfindliche Lebensmittelprodukte, mit manueller Kippfunktion und multifunktionalem Steuerdisplay. Montiert auf fahrbarem Gestell. Geeignet für halbfeste, pulverförmige und flüssige Produkte.
Modell/Typ: VSM 150.
Isdsvuhiqspfx Aaujia
Seriennummer: 4174
Baujahr: 2019
Kapazität: 150 Liter
Stromanschluss: 400 V / 50 Hz / 3-phasig
Leistung: 16 A.
Mažas skelbimas
Egenhofen
1 164 km
Kraštų šlifavimo staklės
HolzkraftKSO 150 F Basic
Skambinti
Būklė: naujas, Gamybos metai: 2022, Juostos plotis: 150 mm
Juostos ilgis: 3000 mm
Stalo dydis: 960 mm x 352 mm
Papildomas stalas: 330 mm x 330 mm
Faneravimo šlifavimo įrenginys: taip
Osciliacija: taip
Šlifavimo agregatas pakreipiamas: taip
Ištraukimo jungtis: 120 mm
Iijdpjgr Ufhofx Aauja
Variklio galia: 3 kW
Staklių ilgis: 1900 mm
Staklių plotis: 810 mm
Svoris: 290 kg
Mažas skelbimas
Bitburg
1 305 km
Kraštų šlifavimo staklės
HolzkraftKSO 150 F Basic
Skambinti
Būklė: naujas, Gamybos metai: 2026, Heavy-duty machine base ensures high torsional rigidity and vibration-free operation
Improved grinding results thanks to sanding belt oscillation powered by a separate geared motor
Oscillation can be switched on or off as required
Standard veneer edge sanding unit with fine adjustment
Grooved infeed fence for sanding excess veneer edges
Quick changeover from veneer to solid wood sanding
Height-adjustable sanding table for use of the entire sanding belt width
Height adjustment of the sanding table and sanding unit tilt via handwheels
Height-adjustable auxiliary table with extraction for sanding radii
Optimal chip removal via extraction at the unit and the cross table
Automatic compensation of belt length differences with spring-loaded belt tension
Dimensions and Weight
Length approx. 1900 mm
Width/depth approx. 810 mm
Height approx. 1230 mm
Weight approx. 290 kg
Dust Extraction Connection
Extraction port diameter: 120 mm
Drive Power
Oscillation motor: 0.25 kW
Work Table(s)
Worktable length: 960 mm
Worktable width: 352 mm
Worktable height adjustment: 210 mm
Cross table minimum height: 730 mm
Electrical Data
Absorbed power: 3 kW
Connection voltage: 400 V
Phases: 3 Ph
Current type: AC
Mains frequency: 50 Hz
Sanding Unit
Sanding belt length: 3000 mm
Sanding belt width: 150 mm
Belt speed: 20 m/s
Sanding area length: 1050 mm
Sanding area width: 220 mm
Isdpoff Ed Tefx Aaueia
Swivel range: 0 – 45°
Oscillation stroke: 20 mm
Availability: Short-term
Mažas skelbimas
Krauchenwies
1 286 km
Žirklinis pakėlimo stalas
Beck Maschinenbau GmbHTT 1500B
Skambinti
Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 1 950 mm, statybinis aukštis: 300 mm, kėlimo aukštis: 1 650 mm, keliamoji galia: 1 500 kg, bendras svoris: 450 kg, bendras ilgis: 2 500 mm, bendras plotis: 800 mm, stalo plotis: 800 mm, stalo aukštis: 1 950 mm, stalo ilgis: 2 500 mm, transporto ilgis: 2 500 mm, transporto plotis: 1 200 mm, platformos plotis: 1 200 mm, platformos ilgis: 2 500 mm, vietos reikalavimas ilgis: 2 500 mm, reikalingas aukštis: 1 950 mm, reikalingas plotis: 1 200 mm, galia: 1,1 kW (1,50 AG), Įranga: dokumentacija / vadovas, Technical specification with the following main data:
Load capacity 1,500 kg static distributed load
Useful lift 1,650 mm
Closed height 300 mm
Overall height 1,950 mm
Platform length 2,500 mm
Platform width 1,200 mm
Material Smooth sheet steel
Iijdpfxjuhphvj Aauea
Lifting time approx. 35 sec. for full lift
Lowering time
depends on load
Power supply 3 x 400 V / 50 Hz + protective earth, incl. 16 A CEE plug and 3 meter cable
Motor 1.1 kW, 1,400 rpm
Solenoid voltage 24 V DC
Degree of protection IP 54 (overall), solenoid valve and switch IP 65
Paint finish dust grey RAL 7037
Power unit location integrated in lift table
Control box dead-man control incl. 2 m cable
Total weight approx. 450 kg
Mažas skelbimas
Dresden
822 km
Rėmo konstrukcija/plieninis rėmas/siurblio rėmas
Oerlikon Leybold Vacuum GmbH(RUTA 2001 502260)
Skambinti
Būklė: naudotas, Gamybos metai: 2008, bendras svoris: 320 kg, bendras ilgis: 2 200 mm, bendras plotis: 800 mm, bendras aukštis: 1 360 mm, Plieninis rėmas vakuuminės siurblinės sistemai Oerlikon Leybold RUTA 2001 502260 (SCREWLINE SP630 + RUVAC WAU 2001).
2 aukštai, įskaitant montavimo skyles siurbliams ir tvirtinimui prie grindų.
Medžiaga: plienas
Iedpfx Aaoyufqcoueia
Spalva: pilka
Svoris: 320 kg
Ilgis: 220 cm
Plotis: 80 cm
Aukštis: 136 cm
- be vakuuminių siurblių (kaip pavaizduota)
- su mažu valdymo skydeliu (kaip pavaizduota, be vidaus)
- su kabelių kanalu (kaip pavaizduota)
Yra 4 vnt.
Kaina be pristatymo (EXW)
Pristatymas galimas pagal užklausimą
Mažas skelbimas
Holthusen
831 km
Sezono juosta
MWT Lettershopsysteme GmbHOctopack 1500
Skambinti
Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, Ilgis 1,50 m -
Valdoma PLC
Formatai iki B4
Galimi įvairūs traukiklių atstumai
Išankstinis skaitiklis, suminė skaitiklis
Iiodpfx Aajch Iv Nousa
Valdymas per skaitymą galimas (pvz., paketų keitimas)
Mažas skelbimas
Delmenhorst
1 020 km
Elektriškai šildomas nerūdijančio plieno rezervuaras
Inox Behälter GmbHEBB150RWP
Skambinti
Būklė: naujas, Gamykloje naujas elektriškai šildomas nerūdijančio plieno maišymo bakas su izoliacija ir propeleriniu maišytuvu, įskaitant naudojimo instrukciją ir CE atitikties deklaraciją.
Modelis: EBB150RWP
Taip pat galima užsakyti su kitais maišytuvais arba kitais dydžiais.
Talpa: 152 l
Matmenys (apytiksliai): Ø 660 mm x cilindro aukštis 625 mm
Bendras aukštis: 910 mm (+ maišytuvo variklis)
Medžiaga: 1.4301 nerūdijantis plienas V2A
Paviršius: IIIc / 2B
Suvirinimo siūlės šlifuotos
Didžiausia darbinė temperatūra: 110°C
Darbinis slėgis inde: ATM
- Pastatoma konstrukcija ant ratukų
- Viršutinis dangtis: dalinai varžtas, dalinai atlenkiamas su nerūdijančio plieno grotelių apsauga nuo patekimo (išimama)
- Apatinis dangtis: plokščias dugnas su šoniniu išleidimu DN50 DIN11851 ir diskinis vožtuvas, tarpinė EPDM
- Maišytuvo flanšo antgalis ant viršutinio dangčio
Iisdeym Uclepfx Aauoa
- 2x rankenos stūmimui
- 1x tipo lentelė
Maišytuvas:
Propelerinis maišytuvas
Galia: 0,25 kW
Sukimosi greitis: 980 sūkių/min.
Darbo įtampa: 3 fazės, 400 V
Mažas skelbimas
Hessisch Lichtenau
1 040 km
Ameise rankinis krautuvas su 360° sukimosi įrenginiu ir pradine pakėlimu (Initalhub)
APE Engineering GmbHUniversal Hubwagen UHW 1500-27/E-Tele-SO
Skambinti
Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 19-1134P, Gamybos metai: 2020, veikimo valandos: 4 h, keliamoji galia: 1 500 kg, kėlimo aukštis: 3 300 mm, stiebo tipas: dupleksas, pavaros tipas: hidrostatinis, akumuliatoriaus įtampa: 24 V, Įranga: CE žymėjimas, griebtuvo hidraulika, spaustukas, Manufacturer: APE Engineering GmbH
Model: Universal Pallet Truck UHW 1500-27/E-Tele-SO
Year of Manufacture: 2020
Voltage: 24V
Lift Height: approx. 3300 mm (center of rotating device)
Load Capacity: 1500 kg
Operating Hours: 4 h (read from display)
The unit is designed for use on level floors for lifting, transporting, gripping, and rotating crucibles. Crucibles can be picked up and swiveled.
Equipment:
- 360° hydraulic rotating device
- Initial lift approx. 100 mm
- Hydraulic clamping device
Iedpfx Aaew Izrcsueia
- Integrated charger 230V
- 24V Hawker trough battery
Scope of delivery:
- Universal pallet truck
- Complete documentation, including circuit diagrams and CE Declaration of Conformity
Dimensions:
Width: approx. 1650 mm
Height: approx. 2300 mm
Length: approx. 1950 mm without attachment and approx. 2400 mm with attachment
The machine can be demonstrated on site.
All information subject to change. Prior sale reserved.
The item is sold without any warranty. This exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of duty by the seller, or for injury to life, body, or health.
Mažas skelbimas
Wrocław
649 km
Matavimo sistema
UTS Testsysteme GmbH / Zwick RoellZMART.PRO 1150.00803
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Technical Specification
Universal Testing Machine UTS Testsysteme / Zwick Roell ZMART.PRO 1150.00803
Identification Data
Name: Universal Testing Machine
Model / Type: ZMART.PRO 1150.00803
Manufacturer: UTS Testsysteme GmbH / Zwick Roell
Year of manufacture: 2001
Place of manufacture: Ulm, Germany
Serial number: 0109 3045
Drive Unit
Servo actuator: GEORGI KOBOLD, type KSY 4612.20-2 R6
Actuator power: 400 × 3.80 W
Planetary gearbox: NEUGART, type PL 115-25
Maximum load: up to 50 kN
Measuring Table
Iiedpfx Aajxbrm Ajuea
Material: metal
Dimensions: 900 × 500 mm
Control System
Control cabinet: controller BZ1 – MM050M1.UT01
Controller serial number: 821501/11
Computer / software: TESTXPERT by Zwick Roell
Load Cell
Manufacturer: Zwick / Roell
Year of manufacture: 2014
Type: Series K
Nominal load: 50 kN
Summary
This machine is a complete testing system designed for mechanical examination of material samples for loads up to 50 kN.
Equipped with a modern load cell (manufactured in 2014) and TESTXPERT software by Zwick Roell, it enables a wide range of mechanical testing in compliance with relevant standards.
This device—the UTS Testsysteme / Zwick Roell ZMART.PRO universal testing machine—is used for strength testing of materials and structural components.
Main Applications:
- Tensile testing – determining the force required to break a sample (e.g., metal, plastic, rubber, composite).
- Compression testing – assessing material behavior under high pressure.
- Flexural and fracture tests – testing resistance to breakage under static loads.
- Cyclic and fatigue tests – examining durability of components under repeated loading.
- Material characterization – determining properties such as yield strength, tensile strength, modulus of elasticity, relative elongation, etc.
Where is it used?
- Research laboratories (universities, institutes, certification bodies)
- Plastics industry – testing properties of new composites, engineering plastics, rubbers
- Metal and aerospace industries – quality testing of metal alloys, aluminum, steel
- Automotive industry – quality control of parts and structural materials
- Quality control in serial production – sample testing before product release
Mažas skelbimas
Wiesbaden
1 191 km
Graviravimo staklės
SK LASER GmbHF50iW1 50 W Faserlaser – Workstation 1,
Skambinti
Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno ilgis: 1 070 mm, ruošinio svoris (maks.): 150 kg, įėjimo įtampa: 230 V, įvesties srovės tipas: Oro kondicionierius, lazerio galia: 50 W, aušinimo tipas: oras, darbo diapazonas: 175 mm, aukščio reguliavimo tipas: elektrinis, nuskaitymo srities ilgis: 175 mm, nuskaitymo srities plotis: 175 mm, stalo aukštis: 710 mm, stalo ilgis: 710 mm, stalo plotis: 400 mm, lazerio bangos ilgis: 1 070 nm, aplinkos temperatūra (min.): 15 °C, aplinkos temperatūra (maks.): 35 °C, įėjimo dažnis: 50 Hz, ekstrakcijos antgalio skersmuo: 50 mm, darbinis plotis: 110 mm, Įranga: kabina, IPG laser source – Laser class 1 · Made in Germany
Workstation – Heavy-duty design:
- Sit/stand workstation, aluminum housing, fully enclosed
- Front door with laser safety glass, bright work lighting
- Work platform: stainless steel, 25 mm perforated grid (710 × 400 mm)
- Manually movable drawer, precision rails, load capacity up to 150 kg
- Extraction nozzle DN50, motorized Z-axis (travel distance 500 mm)
- Interlock, emergency stop, safety relay Performance Level 4
Fiber laser:
- Diode-pumped ytterbium fiber laser, 50 W
- Pulse energy: 1.0 mJ, pulse duration 100 ns
- Wavelength: 1060–1070 nm, pulse frequency 20–200 kHz
- Beam quality M² < 1.2
- Air-cooled, power consumption < 400 W
- Pilot laser + 2 distance lasers (laser class 2)
Scanner & Optics:
- F-Theta lens F = 160 mm (marking field 110 × 110 mm)
- Optional: F = 254 mm, travel up to table height
- X-Y galvo scanner for 1064 nm
- Max. scan speed 4 m/s
Control & Software:
- Industrial PC, Windows 11
- Monitor, keyboard & mouse, monitor arm
- KOLLTRONIC marking software: texts, logos, QR/data matrix, barcodes
- Matrix function for multiple processing
- Easy positioning, focusing, designing, working, coding
Ijdpfjyim S Iox Aausia
Additional equipment:
- Rotary engraving unit for cylindrical parts up to Ø 60 mm
- Controller & software upgrade included
Operating conditions:
- Power supply: 230 V / 50 Hz
- Operating temperature: 15–35°C
Condition:
- New machine
- CE compliant
- Made in Germany
Mažas skelbimas
Holthusen
831 km
Siurbimo diržas
MWT Lettershopsysteme GmbHOctovacu 1500
Skambinti
Gamybos metai: 2022, būklė: naujas, Vacuum conveyor with two suction belts
Individually adjustable vacuum
Speed up to 160 m/min
Continuously variable speed control
Height adjustable
Also available in other lengths
Iijdpfxoch Hcas Aauea
Inkjet base
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Delmenhorst
1 020 km
Nerūdijančio plieno transportavimo konteineris
Inox Behälter GmbHSBPA150
Skambinti
Būklė: beveik kaip naujas (naudotas), Įranga: Tipinė plokštelė prieinama, Used stainless steel transport container
Prepared for agitator
Type: SBPA150
Article number: 10796
Capacity: 173 liters
Design: Vertical configuration on pallet
Iisdper A Engsfx Aauoa
Construction: Single-walled, 1.5 mm wall thickness
Product-contact material: 1.4301 stainless steel
Surface: Satin finish outside, IIId finish inside
Internal weld seams: Pickled, passivated, and brushed
Operating pressure: Atmospheric
Top: 1/2 folding lid
Bottom: Dished bottom with drain groove
Container dimensions:
Tank diameter: 650 mm
Total height: 815 mm
Pallet: 675 x 719 mm
Features:
1x 1/2 folding lid on the top, with locking function (lid can be locked in 90° open position)
Stainless steel grating below the folding lid, bolted, removable
DN50 ball valve outlet fitting, DIN 11851
Galvanized transport pallet
Nameplate
Mažas skelbimas
Delmenhorst
1 020 km
Rezervuaras
Inox Behälter GmbHEBB150RWAD
Skambinti
Būklė: naujas, Factory-new electrically heated stainless steel agitated mixing tank
Article number: EBB150RWAD
Volume: 152 L
Dimensions approx.: Ø 660 mm x cylindrical height 625 mm
Total height: 910 mm
Material: 1.4301 stainless steel V2A
Finish: matt ground inside and outside
Weld seams ground
Max. operating temperature: 110°C
Tank operating pressure: ATM
-Upright design on castors
-Top: Central crossbeam for agitator with two hinged lid halves
-Bottom: Flat bottom with lateral outlet DN50 DIN11851 and disc valve
-Agitator flange nozzle on the top
-2x Push handles
-1x Nameplate
Heating system:
Indirect heating
Double jacket around the tank filled with glycerin as heat transfer medium.
Heating is provided by an electric heating element in the double jacket.
Power: 9 kW
Iisdpfsh Hxxfsx Aausa
Operating voltage: 3PH 400V
Incl. supply cable with 16A CEE plug
Central agitator:
Slow-running anchor agitator with wall scrapers
Type: SRTGMK/0.37-9.5
Manufacturer: Schwarzer Rührtechnik GmbH
Power: 0.37 kW
Speed: 0-9.5 rpm
Operating voltage: 1PH 230V
Product-contacting material: 1.4301 stainless steel
-Gearbox and motor in latest aluminum technology, manufactured by Getriebebau NORD
-Gearbox with food grade oil fill "Klüber"
-Sturdy agitator shaft mounted to the agitator motor with coupling, removable
-Agitator shaft dynamically balanced for smooth running within speed range
-1 piece space-filling anchor agitator, weld seams ground, close to wall arrangement
-2 Teflon wall scrapers in cylindrical area, 1 at the bottom
-Stainless steel flange with shaft seal, EPDM
Speed control:
Compact frequency inverter on the agitator motor with on/off switch and potentiometer
Control:
5 m cable and FI shockproof plug with breaker, undervoltage release
Eccentric agitator:
Speed-controlled dissolver agitator
Type: SRTMKD/1.1-1500-Vari
Manufacturer: Schwarzer Rührtechnik GmbH
Power: 1.1 kW
Speed: 0-1690 rpm
Operating voltage: 3PH 400V
Product-contacting material: 1.4301 stainless steel
-Motor in latest aluminum technology, manufactured by Getriebebau NORD
-Sturdy agitator shaft mounted to the agitator motor with coupling, removable
-Agitator shaft dynamically balanced for smooth running within speed range
-1 piece dissolver disc Ø 125 mm mounted at the end of the agitator shaft, O-ring seal, EPDM
-Stainless steel flange with V-ring seal, EPDM
-Stainless steel spacers for motor mounting
Speed control:
Frequency inverter mounted on the motor, manufacturer Getriebebau NORD. On/off switch, potentiometer, phase inverter
Control:
CEE plug socket with undervoltage release and phase inverter, emergency stop on the tank
Mažas skelbimas
Bardowick
901 km
Kartono pjaustymo staklės
G. Kraft Maschinenbau GmbHKRAFT VPS100-1500
Skambinti
Būklė: naudotas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 410798, įvesties srovės tipas: trifazis, The Kraft VPS100/1500 is a high-precision, fully automatic carton cutting system for flexible and efficient production of shipping and protective packaging from continuous corrugated cardboard—ideal for businesses dealing with variable small batches or on-demand production. Thanks to the patented multi-tool system, creasing, perforating, and cutting can be performed in a single pass, both longitudinally over the processing roller and transversely across the integrated cutting bar.
🎛 Processing & Tools
- 6× multifunction tools for longitudinal processing
- 1× multifunction tool for transverse processing
- Creases are applied gently via creasing sleds, reducing splitting of the cardboard
- Perforation with oscillating cutting knife; intensity adjustable
- Cutting with toothed knife on a rubber-coated roller → fibre-free, grippy cut edge
⚙ Drive & Mechanics
- Maintenance-free, high-dynamic linear drives for precise feed
- Segmented top pressure for reliable carton feed-in
- 2 rubberised rollers serve as counter-cutting and transport media
📐 Technical Data
- Max. working width: 1,500 mm
- Min. working length: 380 mm
Cardboard thickness:
- min. 1.5 mm (E-flute 1.3)
- max. 7.0 mm (BC-flute 2.7)
- Tool width: approx. 45 mm
➕ Carton Feed (Feed Rack)
- Max. stack height: 2,100 mm + 120 mm pallet
- Max. feed rate: 100 m/min
- Min. web width: 300 mm
- Max. web width (VPS 1500): 1,500 mm
- Total "side by side" width: max. 1,350 mm
💻 Control & Software
Hardware
- BECKHOFF Industrial PC C6930 (Intel® Core™ i5-7500T, 2.7 GHz, 4 cores)
- 16 GB RAM, 240 GB SSD
- Windows 10 IoT Enterprise
- 21" multitouch panel
- Control cabinet integrated into main unit
Software Functions
- Multi-stage cut optimization
- Dynamic tool management
- Bidirectional multi-line processing
- User management (User, Service, Admin, Kraft)
- Comprehensive production, carton, and design management
- Message statistics, manufacturer documentation, training videos, service portal, etc.
Documentation
- Operating manual in local language
- Circuit diagrams in German or English
- Spare part drawings
Additional Equipment
- Standard interface for barcode scanner, file import (XML), database import
- Operator panel mounted on a swivelling arm (left side)
🔄 Setup Times & Performance
- Changeover time with automatic carton changer: approx. 4.5 seconds
- Pure tool repositioning: approx. 2.5 seconds
- The machine is delivered with multiple FEFCO formats and is immediately ready for production (e.g. 0201, 0331, 0403, 0410, 0412, 0421, 0401 incl. perforation)
🚚 Installation, Transport & Year of Manufacture
- Demonstration and test machine, year of manufacture 2019
- Single-shift operation since 2022
- Disassembly, packaging, and delivery carried out by the seller
- 3.5 t forklift with long forks required for unloading
🎨 Colour Scheme
- Main unit: RAL 7015 (Slate Grey) & RAL 7035 (Light Grey)
- Safety guard: RAL 7015
- Guard posts: RAL 7035
💡 Key Advantages of this Machine
- Very short setup times → ideal for production of varied packaging
- Fibre-reduced cut edges → reduced injury risk & improved appearance
- Intuitive operation interface
- Fully automatic processing with high precision
Iiodpfjx Emguox Aauoa
- Instantly ready to use thanks to existing design templates
- Low-maintenance linear drives
- High process stability due to segmented top pressure
Mažas skelbimas
Hagenbrunn
915 km
Apdirbimo centras
CNC4ALL GmbHPortal-Fräsmaschine Industry 3000x1500
Skambinti
Būklė: naujas, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 500 mm, Y ašies eiga: 3 000 mm, Z ašies eigos atstumas: 200 mm, ruošinio ilgis (maks.): 3 000 mm, ruošinio plotis (maks.): 1 500 mm, bendras svoris: 1 600 kg, aušinimo skysčio tiekimas: 3 juosta, ašies skaičius: 1, greitasis eiga Z ašyje: 25 000 m/min, greitas poslinkis X ašimi: 25 000 m/min, greitas poslinkis Y ašis: 25 000 m/min, veleno greitis (maks.): 24 000 aps./min, veleno greitis (min.): 12 000 aps./min, Įranga: sūkių greitis be galo kintamas, 🚀 CNC4ALL Industry 3000 × 1500 Milling Machine/Gantry Milling Machine
High-performance CNC milling machine – in stock & ready for operation!
Premium Features:
💪 5.5 kW milling motor (water-cooled) – powerful performance for precise machining of wood, plastic, aluminium & composite materials
⚙️ Servo motors on all axes – high dynamics, precise repeat accuracy, and smooth operation
🧲 Vacuum pump (side channel blower) – optimal workpiece clamping on the vacuum table, even with large-format materials
🌪️ Extraction hood – keeps the workspace clean
💧 Minimum quantity lubrication – extends tool life, reduces coolant consumption, and ensures clean results
🔧 Technical Highlights
* Working area: 3000 × 1500 × 200 mm
Iedpfx Aajxwc Ipsueia
* Repeatability: ± 0.03 mm
* Traversing speed: up to 25,000 mm/min
* Robust welded steel frame for maximum stability
* Hiwin linear guides and rack-and-pinion / ball screw drives for precise movements
* Control unit with user-friendly CNC software (included)
✅ Your Benefits
* Available immediately – no waiting time!
* Delivered fully operational – plug in, switch on, and start milling
* Ideal for joiners, sign makers, and industrial companies
* Efficient, quiet, and low-maintenance – designed for professional continuous use
📞 Get in touch now & secure your offer!
The CNC4ALL Industry 3000 × 1500 combines power, precision, and reliability in industrial quality – ready for immediate use in your business.
👉 Contact us now for an individual offer or a live demonstration in our showroom
Palengviname jums paiešką: "wostor gmbh euromarker basic 150"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
















































































































































































