Sei E1 pirkti naudotą (3 753)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2017 Isdpfx Absxgnwksvsat Elektrostatinis alyvos rūko separatorius alyva aušinamiems automatiniams tekinimo staklėms Kiekis: 14 vienetų Visiškai nauji, niekada nenaudoti

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with foot section, usable depth 1,200 mm - 27 cantilever arms with a usable depth of 1,200 mm, equipped with deflectors - 9 roof supports with a projection of 1,500 mm, pre-drilled for customer-supplied roof construction (*Excludes timber purlins and trapezoidal sheets for roof construction) - Includes longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts re-orderable and extension possible at any time) - (*Available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components’ surfaces are hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (max. snow load 1.85 kN/m², wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (max. snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, 1,200 mm deep, with deflectors = 4 storage levels above each other - Including longitudinal and diagonal bracing with 1,500 mm axle spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load labels C4 in accordance with DIN standards Iajdpfjh R Taqex Abvot - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight service with advance delivery notification. Material is packaged for ease of unloading. The foundation must be concrete, level, suitable for doweling, and capable of bearing all imposed loads. Floor conditions and load-bearing capacity as well as any necessary official permits are to be checked and ensured by the customer. The uprights must be anchored to the floor by the customer; wall anchoring is neither required nor recommended. According to trade association guidelines, uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reorder and extension possible at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Iaedpfx Aed Tbbdobvjt Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load identification plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed to ensure easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and able to support the applied loads. The ground condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, rack uprights should have at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: Isdpfx Aefdkb Tjbveat 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! Iajdeh Ek Dajpfx Abvet - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and extensions possible at any time Iodpfx Abjfdkb Ujvjat - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever rack, painted version (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 2.56 m, with base section, 1.0 m usable depth (1.2 m total depth) - 12 cantilever arms, 1.0 m usable depth - Longitudinal and diagonal bracing for 4 m rack length (spacing 1.3 m) - Fastening material (bolts, nuts, and washers) (*No paint damage!) Net price for pickup: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolt-in system) - Surface painted according to RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per frame: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per frame as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. Ijdpfjguk A Hox Abvjat We offer reliable freight shipping with advance notification before delivery. The material is packed efficiently to enable easy unloading. The subfloor must be made of concrete, level and suitable for anchoring, and capable of bearing the applied loads. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and obtaining any necessary official permits. Rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to German professional association guidelines, it is recommended that the upright frames extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack with Roof Supports: Hot-dip Galvanised Bolted System Scope of Delivery: - 9 upright frames, height 4,230 mm with base segment, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflectors - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excludes timber purlins and trapezoidal sheets for the roof) - Includes longitudinal and diagonal bracing for 1,500 mm frame spacing - Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) Iaedpfemhhy Nsx Abvjt - (*Offer for larger quantities available: approx. 50 uprights in stock) Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanised - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright has 3 bolted cantilever arms with 1,200 mm depth, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing with 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With installation manual and load capacity signs C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on-site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable deliveries with pre-arranged notification. The material is sensibly packaged for easy unloading. The foundation must be concrete, level, and suitable for dowel anchoring and must be able to absorb the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking Used: Hot-dip Galvanised Bolted System Scope of Delivery: - 4 double-sided uprights, height 3,500 mm, each with 1,200 mm base plates - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre-to-centre distance - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed Description: - Robust steel construction made of IPE sections - Surface of all components hot-dip galvanised - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, each with 1,200 mm depth, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. The material is properly packaged to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, suitable for dowelling, and able to absorb the applied loads. Floor structure and load-bearing capacity, as well as any necessary official approvals, must be checked and ensured by the customer. Iajdpemkixwofx Abvjt The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with 1,200 mm foot sections - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Includes mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) Iedpjfdkbhofx Abvoat - Supplied with assembly instructions and load labels C4 as per DIN standard - Professional phone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice before delivery. The material is sensibly packaged to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow load. The subfloor must be concrete, level, and suitable for dowelling as well as able to bear the applied loads. The floor condition, bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) Iaedpfx Aboguk Dkovjt - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard Ijdpfx Absguk Dvsvsat - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.

Būklė: naudotas, rida: 163 430 km, galia: 110 kW (149,56 AG), pirmoji registracija: 06/2001, kuro tipas: dyzelinas, tuščias svoris: 7 250 kg, didžiausias leistinas svoris: 240 kg, bendras svoris: 7 490 kg, ašių konfigūracija: 4x2, ratų bazė: 3 600 mm, kita apžiūra (TÜV): 11/2022, stabdžiai: kitas, spalva: balta, vairuotojo kabina: dieninė kabina, pavaros tipas: mechaninis, emisijos klasė: nėra, pakaba: plienas, sėdimų vietų skaičius: 2, Įranga: ABS, autonominis šildytuvas, kabina, vairo stiprintuvas,

Būklė: naudotas, rida: 149 368 km, galia: 110 kW (149,56 AG), pirmoji registracija: 09/2002, kuro tipas: dyzelinas, tuščias svoris: 7 310 kg, didžiausias leistinas svoris: 180 kg, bendras svoris: 7 490 kg, ašių konfigūracija: 4x2, ratų bazė: 3 600 mm, stabdžiai: kitas, spalva: oranžinė, vairuotojo kabina: dieninė kabina, pavaros tipas: mechaninis, emisijos klasė: nėra, pakaba: plienas, sėdimų vietų skaičius: 3, Įranga: kabina, vairo stiprintuvas,

Būklė: naudotas, rida: 246 914 km, galia: 114 kW (155,00 AG), pirmoji registracija: 12/2000, kuro tipas: dyzelinas, tuščias svoris: 5 860 kg, didžiausias leistinas svoris: 1 630 kg, bendras svoris: 7 490 kg, ašių konfigūracija: 4x2, ratų bazė: 3 600 mm, stabdžiai: kitas, spalva: oranžinė, vairuotojo kabina: kitas, pavaros tipas: mechaninis, emisijos klasė: nėra, pakaba: plienas, sėdimų vietų skaičius: 2, Įranga: kabina,

Būklė: naudotas, rida: 363 584 km, galia: 110 kW (149,56 AG), pirmoji registracija: 05/2002, kuro tipas: dyzelinas, tuščias svoris: 6 840 kg, didžiausias leistinas svoris: 650 kg, bendras svoris: 7 490 kg, ašių konfigūracija: 4x2, ratų bazė: 3 600 mm, stabdžiai: kitas, spalva: oranžinė, vairuotojo kabina: dieninė kabina, pavaros tipas: mechaninis, emisijos klasė: nėra, pakaba: plienas, sėdimų vietų skaičius: 2, Įranga: borto kompiuteris, kabina, sėdynės šildytuvas, vairo stiprintuvas,

Būklė: naudotas, rida: 76 559 km, galia: 184 kW (250,17 AG), pirmoji registracija: 07/2013, kuro tipas: dyzelinas, tuščias svoris: 16 100 kg, didžiausias leistinas svoris: 1 900 kg, bendras svoris: 18 000 kg, ašių konfigūracija: 4x2, ratų bazė: 4 800 mm, stabdžiai: variklio stabdymas, spalva: žalia, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, emisijos klasė: Euro 5, pakaba: plienas, sėdimų vietų skaičius: 3, Įranga: ABS, autonominis šildytuvas, borto kompiuteris, galvos apsauga, kabina, kruizo kontrolė, priešrūkiniai žibintai, suodžių filtras, sėdynės šildytuvas, vairo stiprintuvas,

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: H2X386J09466, Gamybos metai: 2018, veikimo valandos: 14 412 h, keliamoji galia: 1 600 kg, kėlimo aukštis: 3 015 mm, laisvas kėlimas: 1 055 mm, kuro tipas: elektrinis, stiebo tipas: dupleksas, statybinis aukštis: 2 330 mm, pavaros tipas: Elektro, Electric 3-wheel forklift Chassis number: H2X386J09466 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Battery year: 2021 Description: Linde E 16, Ref. No.: R0592, Year: 2018, Battery: 2022, Operating hours: 14,412, Duplex, 3rd + 4th valve, side shifter. The machine is in used visual condition and technically in good condition. Fast and uncomplicated transport possible by arrangement! This listing is for identification purposes only! A detailed description of the condition and possible equipment is provided individually upon request! Errors and prior sale excepted, sale only to businesses. All used equipment is sold without warranty or guarantee. If you haven't found your forklift, please contact us. We have a large selection of further machines on site. The machine is in used visual condition and technically in good condition. Side shifter, 3rd valve, 4th valve, Iaodpjw D H T Esfx Abvet

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 13 501 h, keliamoji galia: 1 600 kg, kėlimo aukštis: 4 625 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 2 150 mm, šakių ilgis: 1 200 mm, tuščias svoris: 3 400 kg, Įranga: apšvietimas, šoninis poslinkis, Triplex mast with full free lift, overall height: 2150 mm, lift height: 4625 mm, integrated sideshift, forks length: 1200 mm, LED work lights front and rear, blue safety light, manual hand shift with monopedal, 48V/625Ah battery from year 2018, 48V/100Ah charger, SE tyres, operating manual included. Technical condition at sale: Forklift is technically overhauled! Major service newly performed! (Timing belt and water pump also renewed) UVV inspection newly passed without defects! Truck newly repainted! Delivery: In perfect condition! 20 years of professional experience! INSPECTION AND TEST DRIVE: Possible anytime during opening hours by appointment: Monday to Friday. From 8:00 am to 6:00 pm. Saturday from 8:00 am to 1:00 pm. Iasdpstvw Rhsfx Abvst TRANSPORT: Low-loader or curtain-side truck available at competitive rates.

Būklė: naudotas, rida: 10 km, galia: 132 kW (179,47 AG), pirmoji registracija: 04/2026, kuro tipas: dyzelinas, tuščias svoris: 2 700 kg, didžiausias leistinas svoris: 800 kg, bendras svoris: 3 500 kg, padangos dydis: 215/75R16C, ašių konfigūracija: 4x2, ratų bazė: 4 035 mm, kita apžiūra (TÜV): 04/2028, kuras: dyzelinas, CO₂ emisijos: 266 g/km, kuro sąnaudos (mieste): 9,1 l/100 km, kuro sąnaudos (užmiestyje): 7,9 l/100 km, kombinuota degalų sąnauda: 8,4 l/100 km, spalva: balta, vairuotojo kabina: kitas, pavaros tipas: mechaninis, pakaba: plienas, sėdimų vietų skaičius: 7, bendras ilgis: 6 678 mm, krovinio erdvės tūris: 21 m³, krovimo vietos ilgis: 3 008 mm, krovinių skyriaus plotis: 2 003 mm, krovos erdvės aukštis: 400 mm, Gamybos metai: 2026, priekinės padangos dydis: 215/75R16C, galinės padangos dydis: 215/75R16C, Įranga: ABS, borto kompiuteris, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, kabina, kruizo kontrolė, naudoto automobilio garantija, oro kondicionavimas, oro pagalvė, priekabos jungtis, suodžių filtras, trauki kontrolė, žemas triukšmo lygis,

Būklė: naudotas, pirmoji registracija: 04/2018, Gamybos metai: 2018,

Būklė: naudotas, rida: 10 km, galia: 103 kW (140,04 AG), pirmoji registracija: 04/2026, kuro tipas: dyzelinas, tuščias svoris: 2 700 kg, didžiausias leistinas svoris: 800 kg, bendras svoris: 3 500 kg, padangos dydis: 215/75R16C, ašių konfigūracija: 4x2, ratų bazė: 4 035 mm, kita apžiūra (TÜV): 04/2028, kuras: dyzelinas, CO₂ emisijos: 266 g/km, kuro sąnaudos (mieste): 9,1 l/100 km, kuro sąnaudos (užmiestyje): 7,9 l/100 km, kombinuota degalų sąnauda: 8,4 l/100 km, spalva: balta, vairuotojo kabina: kitas, pavaros tipas: mechaninis, pakaba: plienas, sėdimų vietų skaičius: 7, bendras ilgis: 6 678 mm, krovinio erdvės tūris: 21 m³, krovimo vietos ilgis: 3 008 mm, krovinių skyriaus plotis: 2 003 mm, krovos erdvės aukštis: 400 mm, Gamybos metai: 2026, priekinės padangos dydis: 215/75R16C, galinės padangos dydis: 215/75R16C, Įranga: ABS, borto kompiuteris, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, kabina, kruizo kontrolė, naudoto automobilio garantija, oro kondicionavimas, oro pagalvė, priekabos jungtis, suodžių filtras, trauki kontrolė, žemas triukšmo lygis,

Būklė: naudotas, rida: 64 884 km, galia: 137 kW (186,27 AG), pirmoji registracija: 02/2018, kuro tipas: dyzelinas, bendras svoris: 7 490 kg, spalva: oranžinė, pavaros tipas: mechaninis, emisijos klasė: Euro 6, sėdimų vietų skaičius: 7, Įranga: ABS, centrinis užraktas, elektroninė stabilumo programa (ESP),

Būklė: labai geros būklės (naudotas), Kompaktiška aukštos spartos obliavimo linijos mechanizacija su krautuvu 1. Weinig EM814 obliavimo staklių padavimo mechanizmas su plokščiąja grandinine šarnyrine padavimo sistema 2. Weinig 820 didelio greičio kampinis obliavimo staklių išvedimo įrenginys su skerspjūvio nušlavėjais 3. Weinig 811 lentų krautuvas su žirkliniu liftu (išleidimas per grandininį konvejerį) -Lentos automatiškai perkeliamas skersai naudojant Weinig 820 kampinio pernešimo įrenginį. -Lentos automatiškai sudaro sluoksnį ir vėliau dedamos ant grandininio konvejerio kėlimo stalo -Užbaigtas paketas perkeliamas į sekantį grandininį konvejerį -Maksimalus našumas: iki 40 ciklų/min. krautuve (daugiau nei 150 m/min pagal vidutinį lentų ilgį). -Reikalinga erdvė: ilgis apie 8000 mm, plotis apie 5000 mm -Maks. pakuotės dydis: 6100 mm x 1200 mm x 1200 mm (aukštis) 3. Weinig kryžminės grandinės po žirklinio lifto pašalina pilnus paketus nuo krautuvo. Iajdpfsxb U Txsx Abvst Galima komplektuoti su Weinig Hydromat obliavimo staklėmis iki 100 m/min pagal poreikį.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, lazerio galia: 350 000 W, X ašies eiga: 1 500 mm, bendras svoris: 2 150 kg, bendras aukštis: 1 350 mm, ašių skaičius: 3, Šis SEI MERCURY 603 1520 350W lazerinis pjovimo aparatas buvo pagamintas 2007 m. Italijoje. Mašinos lazerio galia yra 350 kW. Papildoma įranga Iaodpfsx H A I Dsx Abvot • filtravimo sistema yra įtraukta į komplektą Papildoma informacija mašina yra maitinama Dimensions Machine Depth 3600 mm