Romer /Automatyczna Linia Automat pirkti naudotą (35 216)

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Redpfxofz I D De Ahmecf Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Redpfeflmdwjx Ahmjcf Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, būklė: naujas, The automatic car wash is a solution that allows you to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash facility is equipped with a set of spray pumps. It is designed to ensure that as little liquid as possible remains after the process migrates to subsequent stages, saving money and improving wash quality. This is very important, as apparent savings in systems that operate without these solutions can lead to significantly higher costs in the future, related to chemicals and waste disposal, which will simply be higher. Attention should also be paid to issues regarding compliance with the required bath parameters. Research and development have enabled us to develop a car wash system with an optional component drying feature, where hot air is blown by a series of fans after the washing process is complete. The car wash is equipped with an advanced system for creating user-defined macro programs, which can consist of up to 10 steps per tank according to the number of tanks. Processes can be repeated, their order changed, and so forth. Each tank has its own symbol and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out between processes or at the end of the cycle, for example. • Controls installed on the swivel arm for better access • PLC microprocessor control • 7" touch operating panel Rcedpfofzq Stjx Ahmjf • Significantly larger number of nozzles compared to other solutions • (Option) Ability to dry components after the washing process • Ability to create custom advanced programs • Advanced damper system made from acid-resistant sheet metal, double-protected by limit switches • Monitoring system for secure sealing and opening of the full flap • To minimize fluid mixing: separate piping, nozzles, and tanks for each treatment • Intelligent control – in the event of a power failure or sudden shutdown, fluid mixing is not possible • Fully automatic operation Prices are specified in the catalog.

Būklė: geras (naudotas), Gamybos metai: 2011, automatic unloading line for box pallets. The line is manufactured by MEGA and consists of roller conveyors, a turntable, and a tipper. Suitable for all types of vegetable unloading from box pallets / bins. Rcodpfowylikox Ahmjf

Gamybos metai: 2020, būklė: naujas, The use of a photocell in the workpiece area allows measurement of its length, thereby enabling activation of the spray guns when the workpiece enters detection range, and deactivation of the guns immediately after coating is completed. The photocell is provided as standard equipment. Workpiece identification is carried out using special tags. Identification plates with holes are mounted on the workpiece hanger. Based on this, the PLC controller, in conjunction with the photocell, identifies the painted item and activates or deactivates the spray guns at the appropriate moment, resulting in savings of both energy and powder coating material. Vertical contour detection of the workpiece shape: The use of light barriers with horizontal sensors enables the PLC to analyze the vertical profile of the workpiece. The PLC controller calculates the time at which the workpiece should appear in the gun zone; based on this, selective activation or deactivation of the spray guns is possible. Integration of light barriers with multiple sensors, both horizontally and vertically: Rcedpfx Ahjfy T Aremsf This approach enables precise measurement of the workpiece’s dimensions, which also allows for manipulator control if required. The benefits of using photocells or light barriers are primarily the savings in powder and energy. Unnecessary spraying is eliminated in areas where no workpiece is present. Precise gun control is achieved through the use of light barriers.

Gamybos metai: 2020, būklė: naujas, The automatic car wash is a solution that allows you to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash facility is equipped with a set of spray pumps. It is designed to ensure that as little liquid as possible remains after the process migrates to subsequent stages, saving money and improving wash quality. This is very important, as apparent savings in systems that operate without these solutions can lead to significantly higher costs in the future, related to chemicals and waste disposal, which will simply be higher. Attention should also be paid to issues regarding compliance with the required bath parameters. Research and development have enabled us to develop a car wash system with an optional component drying feature, where hot air is blown by a series of fans after the washing process is complete. The car wash is equipped with an advanced system for creating user-defined macro programs, which can consist of up to 10 steps per tank according to the number of tanks. Processes can be repeated, their order changed, and so forth. Each tank has its own symbol and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out between processes or at the end of the cycle, for example. • Controls installed on the swivel arm for better access • PLC microprocessor control • 7" touch operating panel • Significantly larger number of nozzles compared to other solutions • (Option) Ability to dry components after the washing process • Ability to create custom advanced programs • Advanced damper system made from acid-resistant sheet metal, double-protected by limit switches • Monitoring system for secure sealing and opening of the full flap • To minimize fluid mixing: separate piping, nozzles, and tanks for each treatment • Intelligent control – in the event of a power failure or sudden shutdown, fluid mixing is not possible • Fully automatic operation Rsdpfsflmdbex Ahmscf Prices are specified in the catalog.

Gamybos metai: 2020, būklė: naujas, The automatic car wash is a solution that allows you to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash facility is equipped with a set of spray pumps. It is designed to ensure that as little liquid as possible remains after the process migrates to subsequent stages, saving money and improving wash quality. This is very important, as apparent savings in systems that operate without these solutions can lead to significantly higher costs in the future, related to chemicals and waste disposal, which will simply be higher. Attention should also be paid to issues regarding compliance with the required bath parameters. Research and development have enabled us to develop a car wash system with an optional component drying feature, where hot air is blown by a series of fans after the washing process is complete. The car wash is equipped with an advanced system for creating user-defined macro programs, which can consist of up to 10 steps per tank according to the number of tanks. Processes can be repeated, their order changed, and so forth. Redpfsfy T Szsx Ahmocf Each tank has its own symbol and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out between processes or at the end of the cycle, for example. • Controls installed on the swivel arm for better access • PLC microprocessor control • 7" touch operating panel • Significantly larger number of nozzles compared to other solutions • (Option) Ability to dry components after the washing process • Ability to create custom advanced programs • Advanced damper system made from acid-resistant sheet metal, double-protected by limit switches • Monitoring system for secure sealing and opening of the full flap • To minimize fluid mixing: separate piping, nozzles, and tanks for each treatment • Intelligent control – in the event of a power failure or sudden shutdown, fluid mixing is not possible • Fully automatic operation Prices are specified in the catalog.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 11/2022, bendras ilgis: 2 750 mm, bendras plotis: 1 650 mm, bendras aukštis: 1 800 mm, bendras svoris: 750 kg, Įranga: dokumentacija / vadovas, Automatinė CNC staklė UV šilkografijai – SD2-C4-UV (2022) PARDUODAMA STAKLĖ: SD2-C4-UV – tai automatinė, keturių spalvų CNC staklė, skirta šilkografijos technika atspausdinti. Įrenginys atlieka daugiaspalvį spaudą ant plokščių ir trimačių (apvalių) gaminių, naudojant UV spinduliais ir infraraudonaisiais (IR) spinduliais džiovinamus dažus vieno gamybos ciklo metu. Staklė leidžia spausdinti ant trimačių objektų maksimaliai šešiomis spalvomis, derindama UV ir IR technologijas. Skirta spausdinti iš nedegios medžiagos ir plastikinių gaminių pagamintus elementus, kontroliuojant džiovinamų elementų paviršiaus temperatūrą. Parduodame visiškai veikiančią, automatinę CNC staklę UV šilkografijai, modelis SD2-C4-UV, pagaminta 2022 m. (serijos Nr. 11/2022). Įrenginys veikia be gedimų, pardavimas susijęs su gamybos profilio pakeitimu. PAGRINDINĖS CHARAKTERISTIKOS • Modelis: SD2-C4-UV • Serijos Nr.: 11/2022 • Pagaminimo metai: 2022 • Būklė: naudota, techniškai tvarkinga • Ciklų skaičius: 381 124 • Dokumentacija: pilna techninė dokumentacija (120 puslapių) TECHNINIAI PARAMETRAI • Maitinimas: 3 × 400 VAC / 50 Hz / maks. galia 10 kW • Matmenys: 2750 × 1650 × 1800 mm; svoris ~750 kg • Darbinis slėgis: 6,0 bar (maks. 7,0 bar) Redpezwdv Uofx Ahmscf • Apvalių objektų spausdinimas: skersmuo 10–150 mm, aukštis iki 250 mm • Plokščių objektų spausdinimas: iki 250 × 100 × 100 mm • Maks. spausdinimo plotas: 310 × 180 mm (1 spalva) • Valdymas: 1 operatorius PAGRINDINIAI PRIVALUMAI • 4 spalvų UV ir IR šilkografija vieno ciklo metu (iki 6 spalvų) • 9 CNC servo varikliai – pilna automatizacija • Spausdinimas ant apvalių (skersmuo 10–150 mm) ir plokščių objektų • Vizualinė sistema (kamera + monitorius) tiksliam šablonų suderinimui • Nuotolinė priežiūra per internetą; programinės įrangos atnaujinimas • PLC valdiklis su jutikliniu HMI ekranu, meniu lenkų kalba • Pilnos saugos sistemos pagal CE normas (fotoelektrinės užtvaros, kojinis pedalas) • UV reaktorius su 200 mm lempos / ~250 W/cm

Būklė: labai geros būklės (naudotas), MOSCA RO-M-P2 – automatinė mašina PP juostoms suspausti Parduodama aukštos kokybės automatinė mašina polipropileno (PP) juostoms suspausti, pagaminta žinomo vokiečių gamintojo MOSCA. Šis įrenginys skirtas greitam ir efektyviam kartonų, pakuočių ir kitų gaminių, paruošiamų transportavimui ir sandėliavimui, suspaudimui. Ši mašina puikiai tinka sandėliuose, logistikos centruose, gamybos įmonėse, internetinėse parduotuvėse ir pakavimo įmonėse. Techniniai duomenys: Redpfxjzkmp Do Ahmocf Gamintojas: MOSCA Maschinenfabrik Gerd Mosca GmbH Modelis: RO-M-P2 Gamybos metai: 2000 Serijos numeris: 58664 Šalis: Vokietija Maitinimas: 230 V Dažnis: 50 Hz Galia: 0,5 kW Nominali srovė: 2,4 A Valdymo įtampa: 24 V DC Įranga: Automatinis PP juostos suspaudimas Juostos įtempimo jėgos reguliavimas Automatinis juostos suvirinimas Valdymo skydelis su indikatoriais Pagrindinis jungiklis Didelis darbinis stalviršis iš nerūdijančio plieno Mobilus, ant ratukų montuojamas korpusas Patvari pramoninė konstrukcija Būklė: Mašina naudota. Techniškai tvarkinga. Vizualiai gera būklė, turi įprastus naudojimo pėdsakus. Parduodama būtent tokios būklės, kokia matoma nuotraukose.

Būklė: labai geros būklės (naudotas), Siūlau padėklų vyniotuvą SANPACK FIX, skirtą krovinių apvyniojimui stretch plėvele sandėliavimo ir transportavimo metu. Techniniai duomenys: Gamintojas: Sanpack Rodjzf Rkuopfx Ahmscf Modelis: SANPACK FIX Maitinimas: 3×380V + N + PE Dažnis: 50 Hz Galia: 0,55 kW Nominali srovė: 2,0 A Apsaugos klasė: IP54 Privalumai: Sukamasis padėklų stalas Stretch plėvelės laikiklis Tvirta pramoninė konstrukcija Valdymas iš operatoriaus pulto Puikiai tinka sandėliams, gamybos įmonėms ir logistikos centrams Išvaizdos būklė atitinka nuotraukas. Naudota mašina.

Gamybos metai: 2020, būklė: naujas, ROMER® specializes in the manufacture of individual technological devices for powder coating systems, as well as complete fully automatic turnkey coating installations. ROMER® provides heating solutions for the aerospace and automotive industries, serving the largest companies in the world. We offer warranty and post-warranty service for equipment sold by us, including a comprehensive range of spare parts. A mesh applied to a poorly prepared surface will peel off or corrode after a short period. Ensuring the best coating essentially relies on proper degreasing—the foundation of any painting process. The coating applied to inadequately degreased parts will detach very quickly. After degreasing, the next step is to roughen the outer layer of the part, which improves paint adhesion (e.g., when bending sheet metal) and also provides protection, such as through a phosphate coating, which in turn extends corrosion resistance. There are many solutions to address these issues. What is the most important factor in a powder coating workshop? You might assume it is the applicator. This is a misconception—even the best applicator cannot help if your oven has poor temperature distribution. If the part overheats in a certain area, the paint will discolor, and if it does not heat properly, the paint will peel off. The most crucial component is the oven. Oil, gas, or electric oven? Unsure how to power your oven? Which method is more cost-effective? What are the implications? What are the operating costs? We will try to answer your questions. Depending on customer requirements, transport systems can be moved on the floor or suspended from rails. - For convenient solutions in manual applications, we recommend overhead cross-tracks (lateral transport). Rcsdpfxsfz Ndyo Ahmof - In automated systems, chain conveyors are most commonly used. These operate continuously and are an excellent solution for companies focusing on process quality and repeatability. - For companies that manufacture different items simultaneously and, for example, operate several booths with different colors, flexible solutions using non-powered conveyors are utilized. However, this is the most expensive solution.

Gamybos metai: 2020, būklė: naujas, ROMER® specializes in the manufacture of individual technological devices for powder coating systems, as well as complete fully automatic turnkey coating installations. ROMER® provides heating solutions for the aerospace and automotive industries, serving the largest companies in the world. We offer warranty and post-warranty service for equipment sold by us, including a comprehensive range of spare parts. A mesh applied to a poorly prepared surface will peel off or corrode after a short period. Ensuring the best coating essentially relies on proper degreasing—the foundation of any painting process. The coating applied to inadequately degreased parts will detach very quickly. After degreasing, the next step is to roughen the outer layer of the part, which improves paint adhesion (e.g., when bending sheet metal) and also provides protection, such as through a phosphate coating, which in turn extends corrosion resistance. There are many solutions to address these issues. What is the most important factor in a powder coating workshop? You might assume it is the applicator. This is a misconception—even the best applicator cannot help if your oven has poor temperature distribution. If the part overheats in a certain area, the paint will discolor, and if it does not heat properly, the paint will peel off. Redpfeflrc Sox Ahmjcf The most crucial component is the oven. Oil, gas, or electric oven? Unsure how to power your oven? Which method is more cost-effective? What are the implications? What are the operating costs? We will try to answer your questions. Depending on customer requirements, transport systems can be moved on the floor or suspended from rails. - For convenient solutions in manual applications, we recommend overhead cross-tracks (lateral transport). - In automated systems, chain conveyors are most commonly used. These operate continuously and are an excellent solution for companies focusing on process quality and repeatability. - For companies that manufacture different items simultaneously and, for example, operate several booths with different colors, flexible solutions using non-powered conveyors are utilized. However, this is the most expensive solution.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MClL-800?OSK+KK, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, aušinimo tipas: oras, bendras plotis: 2 330 mm, bendras ilgis: 2 150 mm, bendras aukštis: 2 800 mm, aliuminio lakšto storis (maks.): 2 mm, nuolatinis darbinis slėgis: 0,5 juosta, stalo ilgis: 1 150 mm, Įranga: Tipinė plokštelė prieinama, karštas vanduo, Industrial rotary spray washer with vapor freezing device and deionization station. Designed for washing steel, aluminum, and non-ferrous metal components with a maximum load of 250 kg and dimensions up to 1000x800 mm. Technical documentation and completed service records are available for the unit. For more information, please call the provided phone number. Rcodpfownbh Ejx Ahmef

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: KAP1, oro poreikis: 16 000 m³/val, galia: 36 kW (48,95 AG), siurbimo galia: 16 000 m³/val, Įranga: kabina, Dielektrische automatische Pulverbeschichtungsanlage KAP1 Preis: 492.693,30 PLN + MwSt. Elektrische und Energiedaten • Spannung: 400 V (3P + N + PE) • Anschlussleistung: 36,34 kW • Pneumatikanschluss: 1" • Luftdruck: min. 6 bar • Luftqualität: Öl < 0,1 mg/m³, Wasserdampf < 1,3 g/m³ • Luftverbrauch: 1.710 Nl/min (Betrieb) • Kompressor: SC-30 • Luftbehälter: 1.800 L Lackierparameter • Beschichtungsgeschwindigkeit: 1.933 mm/min • Bauteilabmessungen: 800 x 1.800 mm • Hakenhöhe: 500 mm • Schichtdicke: 100 µM • Pistolenanordnung: vertikal Technische Daten und Konfiguration • Ausführung: dielektrischer Kunststoff • Durchgangsmaße: 1.000 x 2.400 mm • Luftförderleistung: 12.348–16.000 m³/h Rcedpjv Rpx Sofx Ahmof • Pulverzentrum: ProfiCenter CP02 • Manipulatoren: 2 Stk. • Pistolen: 8 automatisch, 2 manuell (ProfiSpray) • Teileerkennung: ja (Höhe, Breite) • Systeme: Zyklonabscheider, ProfiControl, Teileziehvorrichtung • ATEX: Zone 22, II 3D Plattformen und Kabinenkörper • Plattformen: Ein-/Ausstieg, Edelstahlboden, rutschfeste Treppen • Gehäuse: dielektrischer Kunststoff, LED-Beleuchtung, Aufnahmen für Manipulatoren Luftmesser und Absaugkanal • Automatische Bodenreinigung • Absaugkanal mit pneumatischer Klappe Pistolenabblasung und Steuerung • Automatische Pistolenabblasung • 10" Touchpanel, 50 Programme, Manipulatorsteuerung, Staubabsaugung, Fahrgeschwindigkeit X-Achse und Teileziehvorrichtung • Automatische Pistolenpositionierung • Teileziehgeschwindigkeit: 570–2.830 mm/min, 2 Zieheinheiten Die Maschine umfasst außerdem: • ProfiSpray A Applikator • PSS-1 Steuerung • PM-1 Pistolen • ProfiCenter CP-02 Pulverzentrum • CK-D1400L Zyklonabscheider • MA1-180 Manipulator und MX1-10 X-Achse • OZ-12H Staubabsaugung • ProfiControl 10" Steuerung • BP-H2000 W900 Teilemesssystem

Gamybos metai: 2020, būklė: naujas, The company ROMER is also involved in the production of overhead conveyor systems. Cross transfers (cross transports) are designed and manufactured for specific installations. Examples of such equipment are listed below: conveyor systems. Depending on customer requirements, the conveyor systems can move on the ground or be suspended from rails. - For efficient solutions in manual installations, we recommend suspended crossbeams (cross transport). - In automated systems, chain conveyors are most commonly used, as they operate continuously and offer an excellent solution for companies focused on quality and process repeatability. - For companies that manufacture different products simultaneously and, for example, operate multiple booths with different colors, flexible solutions using a non-powered conveyor are implemented. This is the most expensive option. Rcjdpofz Difjfx Ahmef

Gamybos metai: 2020, būklė: naujas, The company ROMER is also involved in the production of suspended transport systems. Cross traverses (cross conveyors) are designed and manufactured for specific installations. Examples of equipment are listed below: transport systems. Depending on customer requirements, the transport systems can operate on the floor or be suspended from rails. Rcodjfz Dibspfx Ahmef - For convenient solutions for manual operations, we recommend suspended cross beams (cross conveyors). - In automated systems, chain conveyors are most frequently used; these operate continuously and represent an excellent solution for companies focusing on process quality and repeatability. - For companies that produce different items simultaneously, such as operating several booths with different colors, flexible solutions using non-powered conveyors are implemented. This is the most expensive option.

Būklė: naudotas, Gamybos metai: 2019, - Dėklų įkrovimas - Tvirtinimo įtaisas rėmo detalėms - 3 horizontalūs išilginiai gręžimo įrenginiai iš galinės pusės - 4 vertikalūs gręžimo įrenginiai iš viršaus 1 gręžimo automatas Gamintojas: KOCH Tipas: BL 2500 NC select line - naudotas - Pagaminimo metai: 2019 Detalių matmenys Detalės ilgis: 150–2500 mm Detalės plotis: 20–300 mm Detalės storis: 10–50 mm Medžiaga: masyvi mediena Dėklų įkrovimas 1 su detalės grąžinimo funkcija. Detalės įdėjimas naudojant 2 lygiagrečiai valdomus servovariklius. Dėkluose esančių detalių skaičius priklauso nuo detalės svorio. Rankinis detalių įdėjimas Tvirtinimo įtaisas rėmo detalėms 1 Įdėjus 3 atraminius segmentus į išilginius gręžimo įrenginius, detales galima įdėti rankomis ir tvirtinti naudojant tvirtinimo cilindrus ir šablonus. Tokiu būdu taip pat galima gaminti detales pagal individualius matmenis. Darbo ciklo paleidimas naudojant 2 rankinius valdiklius, esančius perjungiamoje valdymo skydelyje. 3 horizontalūs išilginiai gręžimo įrenginiai iš galinės pusės Konstrukcinis plotis: 160 mm Gręžimo variklis: 2 kW Išilginis reguliavimas (X) su LCD ekranu Aukščio reguliavimas (Z) Su dulkių nusiurbimo sistema 4 vertikalūs gręžimo įrenginiai iš viršaus Rjdszuynhspfx Ahmecf (vienpusis guolis tiesioginėje kreipiamojoje) Judamas per visą darbo plotį (X), rodmenys LCD ekrane. Judamas darbinio gylio (Y) atžvilgiu, rodmenys LCD ekrane. Vienas vertikalus tvirtinimo cilindras, sumontuotas tiesiogiai ant įrenginio. Kontraatramos, skirtos kiauryminėms skylėms, tiekiami kaip papildoma opcija. Gręžimo variklis 1,5 kW, 50 Hz Gręžimo eiga 50 mm Sūkių skaičius: 2 800 aps./min. Grąžto bendras ilgis: 70 mm Su 4 sukamosiais žiedais, leidžiančiais greitai reguliuoti (skirtiems vertikaliems gręžimo įrenginiams) su fiksuotomis atramomis 0 ir 90 Padėties valdymo sistema KOCH NUMERIC Basic 1 Padėties valdymo sistema su Beckhoff C6920 pramoniniu kompiuteriu Intel Celeron 2,2 GHz procesorius 2,5 colio 320 GB HDD 1 x RS232, 2 x USB, 1 x Ethernet prievadai 15 colių jutiklinis ekranas Operacinė sistema Windows 7: anglų kalba Vartotojo sąsaja: anglų kalba Visų mašinos komandų įvedimas per jutiklinį ekraną Programinė įranga paruošta prisijungimui prie interneto. Prisijungimo prie interneto (tinklo) konfigūraciją ir paleidimą atlieka klientas arba jo programinės įrangos įmonė. USB prievadas kompiuteryje 4 x dinaminės NC ašys (su guolio valdymo sistema) Z ašims Prisijungimo duomenys 1 Elektrinis prijungimo pajėgumas: 400 V, 50 Hz, 3 fazės Įtampos svyravimai maks. + 6 % iki - 10 % Jei įrenginyje įrengtas FI (liekamosios srovės) apsaugos jungiklis, turi būti naudojamas plačiai dirbantis (R CCB, B tipas) FI apsaugos jungiklis su vardine liekamosios srovės verte /= 300 mA. Oro prijungimas: 7 bar Dulkių nusiurbimo oro greitis: min. 30 m/s Pastaba: Techniniai duomenys ir aprašymai yra kopija iš tuometinio užsakymo patvirtinimo. Duomenys skirti informacijai ir yra neįpareigojantys.

Būklė: naudotas, Hidraulinis profilių lankstymo įrenginys, vamzdžių lankstymo staklės LANG modelis Ondomat 60 Rodpfx Ahjyi Hrwsmjcf Gamintojo Nr. 2589 Pagaminimo metai: 1970 Maksimali lankstymo galia: Ø 60 x 2 mm Slėgio jėga: 20 t Priešpriešinė jėga: 7,5 t Maksimalus lankstymo kampas: 135° Įrankio eiga: 250 mm Maksimali įrankio plotis: 125 mm Išorinė įrankio sūpuoklės plotis: 90 mm Variklio galia: 18 kW Maitinimo įtampa: 380 V, 50 Hz - Hidraulinis lankstymo procesas su priešslėgio cilindru be raukšlių lankstymui - Iki 10 skirtingų lankstymo kampų iš eilės per automatinį perjungiamą revolverį - 2 rankų valdymo pultas - 1 vnt. lankstymo įrankis Ø 30 mm, sūpuoklės įrankio plotis = 78 mm, atraminio įrankio plotis = 50 mm. Matmenys (I x P x A): 2000 x 750 x 1500 mm Svoris: apie 2 t Gera būklė

Gamybos metai: 2007, būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: L110-NC6-NC5-k8-12-S80-104, Keystone automatinė pokerio smaigalio formavimo mašina parduodama Parduodama Keystone automatinė pokerio smaigalio formavimo mašina, naudota, veikianti. Mašina yra skirta automatiniam medinių lazdų keturkampių galų apdorojimui / smaigalio formavimui ir yra patikima pramoninė įranga ilgalaikiam naudojimui. Keystone mašinos garsėja tvirta konstrukcija, patikimu veikimu ir paprastu valdymu. Techniniai duomenys: * Gamintojas: Keystone * Modelis: Automatic Pointer * Būklė: naudota * Darbinė būklė: veikianti * Pritaikymo sritis: automatinis smaigalio formavimas * Konstrukcija: perstatyta veikti nuo 380 V, su hidraulinė sistema ir transporterių. Mašina gali būti apžiūrėta pagal susitarimą. Redpfoy Epldjx Ahmecf Papildomą informaciją, techninius duomenis, nuotraukas ar vaizdo įrašą veikimo metu atsiųsime pagal užklausą. Vieta: Baranja, Vengrija Pasiliekame teisę suklysti ar atlikti tarpinį pardavimą.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7525SE-0949-FA, matavimo diapazonas X ašis: 2 600 mm, ašių skaičius: 7, TECHNINĖS CHARAKTERISTIKOS Ašys: 7 Matavimo diapazonas: 2,6 m Tikslumas Kalibravimo temperatūra: 20 °C Santykinė oro drėgmė kalibravimo metu: 50 % Didžiausias leistinas nuokrypis atskirame taške: 0,028 mm Nustatytas nuokrypis atskirame taške: 0,010 mm Didžiausias leistinas tūrinis ilgio matavimo nuokrypis: ± 0,039 mm Nustatytas tūrinis ilgio matavimo nuokrypis: -0,018 mm Skaneris Gamintojas: Hexagon Modelis: CMS108 Integravimas: Integruotas į matavimo ranką Pastaba: galima naudoti su atitinkama skanavimo programine įranga Pastaba: skanavimo programinė įranga neįeina į komplektą MAŠINŲ CHARAKTERISTIKOS Konstrukcija: mobilioji matavimo sistema Matavimo sistemos svoris, įskaitant transportavimo dėklą: apie 40 kg Išoriniai matmenys, transportavimo dėklas ir matavimo ranka: apie 1.350 x 550 x 350 mm Stovo matmenys: apie 750 x 750 x 750 mm Stovo svoris: apie 75 kg Skanerio dėklo matmenys: apie 600 x 450 x 220 mm Skanerio svoris, įskaitant transportavimo dėklą: apie 6 kg Nešiojamojo kompiuterio dydis: 17 colių Pastaba: prieš paskutinį kalibravimą matavimo ranka buvo perženklinta ĮRANGA - Hexagon ROMER Absolute Arm RA-7525SE, 7 ašių matavimo ranka - Mobility Pack FP2-1503-FA su belaidžiu ryšiu su kompiuteriu - Transportavimo dėklas matavimo rankai - Magnetinis pagrindas - Kalibravimo juosta, ilgis 700 mm - Kalibravimo rutulys, skersmuo 25 mm - Jutiklio blokas su 3 jutikliais - Jutiklis su rubino rutuliu, skersmuo 6 mm - Jutiklis su rubino rutuliu, skersmuo 3 mm - Kalibravimo rutulys, skersmuo 15 mm - Apsauginis gaubtas nuo dulkių Rodpfx Ahezv Rhuemscf - Visas laidų komplektas - Matavimo rankos kalibravimo sertifikatas, nešiojamasis kompiuteris Dell M6600 - Programinė įranga PowerInspect 11, įskaitant aparatinį raktą - Hexagon-RDS programinė įranga - Brunson 231 mobilusis stovas, reguliuojamo aukščio - Stovo reguliuojamo aukščio diapazonas: apie 700–1100 mm - Skaneris Hexagon CMS108 - Transportavimo dėklas skaneriui - Skanerio kalibravimo sertifikatas Pastaba: PowerInspect 11 skirta tik kontaktiniams matavimams, negalima prijungti prie skanerio Pastaba dėl pakuotės: 250 € - speciali padėklas su kartonine konstrukcija ir stovu ant europinio padėklo.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Parduodama profesionali vokiškos įmonės ErgoPack paletinių krovinių apvyniojimo sistema. Modelis 725E – tai visiškai elektrinis įrenginys, leidžiantis saugiai ir greitai apvynioti paletes be lenkimosi – puikiai tinka sandėliams, logistikai ir gamybai. SVARBIAUSI PRIVALUMAI - Automatinis juostos vedimas aplink paletę - 24V elektrinis valdymas - Darbo režimai: AUTO MAN SOFT - Juostos įtempimo reguliavimas - Maksimali įtempimo jėga iki 2500N - Ergonomiškas valdymas be operatoriaus pastangų - Mobilus konstrukcija ant ratukų Rcodpfx Asyw Iagohmjf - Šveicariška kokybė (Swiss Made komponentai) TECHNINIAI DUOMENYS Gamintojas: ErgoPack Deutschland GmbH Modelis: 725E Maitinimas: 24V DC Maks. juostos įtampa: 2500N Būklė: naudotas, geros techninės būklės Komplekte – įkroviklis BŪKLĖ Įrenginys visiškai pilnas. Normalūs naudojimo žymės. Valdymo skydelis veikia – įrenginys paruoštas darbui. PANAUDOJIMAS - sandėliai - logistikos centrai - gamyba - palečių transportavimas ir pakavimas

Būklė: geras (naudotas), For sale: - Injection molding machine, aggregate, automatic line for the production of EPS styrofoam shapes – thermal boxes, fish boxes – used, in very good condition. The machine is currently still connected to the installation, which will facilitate dismantling and marking of individual connections for the buyer. - Complete machine, ready to be connected to steam installation, EPS granulate transport, electrical power, compressed air, and cooling system. - Year of manufacture: 2023 - Configurable mold for the production of EPS thermal boxes and fish boxes – 3 sizes, with or without holes, with lids – a total of 6 configurations; in one cycle, complete boxes with lids are produced – no need to change the mold. - The set includes design rights for boxes/fish boxes – documentation provided. IMPORTANT! The machine can also produce EPS building elements for walls and ceilings! – examples in one of the photos. We have other components of the production line – check our listings. We also have other elements/devices for sale such as: - Injection molding machine, aggregate, automatic line for the production of EPS foundation boards + board mold - EPS pre-expander - Steam installation: boiler room – machines Rjdpfx Ahjua Dqiemocf - Steam tank 3m3 - Transport installation for expanded EPS - EPS silos - Styrofoam crusher - Many spare parts More photos and information available by email. Possibility to sell individual components of the set separately.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2010, The line was produced in 2010. Full modernization took place in 2020. ZEMAN CZS LINE – SPECIFICATIONS Rcjdpfx Ajymampehmof The fully automatic “PURLIN” line, ZEMAN’s flagship product, is designed for the production of open, cold-formed profiles such as C-, Z-, and Sigma-profiles in a variety of widths and shapes. This is enabled by fully automatic adjustment of the profile rollers. As input material, coils up to 750 mm in width and sheets with a thickness between 1.25 mm and 3 mm in grade S-390 and lower can be processed. The machine is designed to produce components up to 15 meters in length. The width of the specially hardened profile rollers can be continuously adjusted via dedicated software. A fully integrated punching unit creates all types of fastening holes. The entire process runs continuously, meaning the material does not stop for individual operations such as punching or cross-cutting. To ensure high production efficiency, the line speed is optimized dynamically. The machine automatically decelerates and accelerates without operator intervention. A coil decoiler with a maximum working load of 15 tonnes is mounted on a trolley and allows precise centering of the strip before it enters the straightener. The straightener, in combination with a camber correction system, straightens the material, ensures the required flatness of the sheet, and reduces the camber on the conveyor belt. 2. Punching section This section features five double, “flying” punching portals which can be fitted with 20 small (up to 40 mm) or 10 large (up to 100 mm) tools (punches and dies) for punching fastening holes. A combination of these tools is also possible. 3. Pre-cut shear A “flying” shear is used for pre-cutting holes for the cutting shear. This process ensures material continuity and results in a more precise profile shape, especially at the beginning and end. It uses an adaptive guillotine that adjusts the width of the punched hole to the width of the strip. 4. Guiding trolley/SIGMA modules The guiding trolley centers the strip before entering the roll forming machine. It can be interchanged with the module for producing Sigma profiles. For S+ profiles, the guiding trolley is removed and two Sigma modules are used. These modules position themselves automatically and independently left and right. 6. Rotary cut-off saw The rotary cut-off saw with hooked knives separates the finished profile from the material strip. It uses the holes made by the pre-cut shear. This is a “flying” cut-off saw, so the strip remains in motion during cutting. Depending on the desired profile, an appropriately aligned cutting cassette is used. 7. Receiving table The receiving table serves for the automatic discharge of the finished profiles from the roller conveyor. The elements are subsequently manually grouped into a bundle. The design allows for easy bundling of the package. The table is dimensioned for the receipt of profiles up to 15 meters in length and enables access by forklift or overhead crane to pick up the profile bundle.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Parduodama miltelinio dažymo linija Romer. Įranga 2022 metų gamybos, mažai naudota. Buvo dažomos šarvuotos durys. Miltelinio dažymo liniją sudaro: 1. Krosnis (duris iš abiejų pusių, 5 dažymo bėgiai) Modelis: Romer SW Vidiniai išmatavimai: 3000 x 1500 x 2200 mm Krosnis neturi šildymo degiklio, buvo naudojamas dujinis. Pagal poreikį galima įsidėti dujinį ar elektrinį. Rcsdpfx Aeyzw Hwohmef 2. Romer dažymo nutraukimo sienelė Modelis: Romer KPO-3ZN 3. Transportavimo sistema Bendri išmatavimai: ilgis 5900 mm x plotis 14000 mm, 2 vežimėliai po 5 bėgius. 4. Traversai su ratukais (20 vnt.) Šiuo metu linija yra demontuota, paruošta transportavimui.

Būklė: labai geros būklės (naudotas), Parduodamas kompleksinis žaliųjų žirnių perdirbimo įrenginys – valytuvas, akmenų separatorius ir plovimo sietas viename. Našumas apie 6 t/h. Rjdpfxozhv Nuj Ahmecf