Pony Maxi 60 pirkti naudotą (33 470)

Gamybos metai: 2022, būklė: naudotas, Svoris be apkrovos: 135 kg Ijdpfezvb Irsx Af Hjtk Serijos numeris: 280517

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 5 600 mm, bendras ilgis: 11 200 mm, bendras plotis: 5 100 mm, įvesties srovės tipas: trifazis, garantijos trukmė: 24 mėnesiai, vidinis aukštis: 4 970 mm, vidinis ilgis: 11 000 mm, temperatūra: 80 °C, vidinis plotis: 5 000 mm, oro poreikis: 52 000 m³/val, įėjimo įtampa: 380 V, šildymo galia: 250 kW (339,91 AG), galia: 45 kW (61,18 AG), kuras: suskystintos naftos dujos (LPG), įėjimo dažnis: 50 Hz, energijos suvartojimas: 45 kWh, izoliacijos storis: 50 mm, nominali galia: 250 kW (339,91 AG), plieno lakšto storis (maks.): 2 mm, Įranga: apšvietimas, * Air Treatment Unit: Itedpfjwzl Hxjx Af Hsk The air treatment unit is a recirculation system that supplies the cabin with filtered fresh air and expels used air during the painting process. It heats the air to 60°C, mixes 10% fresh air with recirculated air via an automatic multi-damper system, and reheats the air before it is fed back into the cabin. Air is heated using a burner and heat exchanger, both made from high-grade 304 stainless steel and housed in the fresh air unit. During painting, the air passes through two stages of filtration (front and ceiling filters) before entering the cabin. The contaminated air is also filtered twice (inlet and outlet filters) before leaving through the extraction unit. Air treatment units are insulated like the side walls to minimize heat loss and are equipped with rubber seals on the covers to protect against possible vibrations and noise. The exhaust air is regulated by a damper in the exhaust air duct, which helps control the cabin’s internal pressure. * PRINCIPLE OF OPERATION FOR THE CABIN: Processes inside the cabin are controlled via an operator panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passes through front filters before entering the distribution chamber at ambient temperature. The air is then extracted through the exhaust unit. Floor filters (paint stop) capture paint particles, and the air passes through final exhaust filters before being released. * FLASH-OFF PROCESS: After painting, the cabin continues to operate for about 15 minutes to expel residual solvents and thinners. During this process, fresh air from outside circulates in the cabin. * DRYING PROCESS: In this phase, 80% of the air circulating through the cabin is heated to 60°C and supplied to the cabin via the distributor. Since 20% of the solvents are released during drying, they are expelled along with this air. Industrial paints are generally dried at 60°C, though the cabin temperature can be adjusted via the operator panel as needed. * COOLING PROCESS: After the 30-minute drying phase, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system is restarted. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices integrated into the cabin. The panel is constructed from robust galvanized sheet metal and steel profiles, and is fully enclosed for protection from dust and moisture. Electrical Components and Switching Panels: • The switching panel includes all necessary components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for control and command connections between the control panel and motors or other electrical devices. • Wiring is designed to allow for cabin relocation, if required. • Operating equipment is powered at 380 V 50 Hz, while control devices run at 220 V.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 3 500 mm, bendras ilgis: 7 050 mm, bendras plotis: 4 100 mm, tūrio srautas: 36 000 m³/val, temperatūra: 80 °C, įėjimo įtampa: 380 V, šildymo galia: 250 kW (339,91 AG), Įranga: apšvietimas, kabina, Paint and Drying Booth It is the centerpiece of your entire painting process: the combined paint and drying booth. Ijdexa H Ewjpfx Af Hotk (Optionally also available as a separate paint booth with a separate dryer.) Here, we rely on full-surface ceiling filters and, optionally, a full-surface floor extraction system with drive-over grating or wall extraction at the position of your choice. If you would like to further increase the efficiency of the system beyond heat recovery and stepless control via frequency converters, we are pleased to offer you a sectional control system. This allows you to activate only the section where the parts are located—in the case of repair painting or partial booth loading (for example, if you only want to paint add-on parts). You benefit from being able to operate with reduced air volume, maintain the same quality standards, and save energy—and, ultimately, real money. Just ask us—we would be happy to demonstrate these options to you in more detail. Do you have questions or suggestions? We're happy to assist you.

Būklė: naujas, Gamybos metai: 2025, bendras aukštis: 4 000 mm, bendras ilgis: 7 000 mm, bendras plotis: 3 000 mm, garantijos trukmė: 24 mėnesiai, temperatūra: 80 °C, oro poreikis: 36 000 m³/val, įėjimo įtampa: 380 V, šildymo galia: 345 kW (469,07 AG), galia: 40 kW (54,38 AG), kuras: suskystintos naftos dujos (LPG), energijos suvartojimas: 40 kWh, izoliacinė medžiaga: Mineralwolle, izoliacijos storis: 50 mm, nominali galia: 345 kW (469,07 AG), Įranga: apšvietimas, MAIN STANDARD Ijdpfx Aewzmcbsf Hetk Our spray booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. The processes in the booth are managed via a PLC system, ensuring that the desired parameters are consistently maintained. FUNCTIONAL PRINCIPLES OF THE BOOTH The processes within the booth are operated using a control panel that manages the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at external temperature. The air is then expelled through the extraction unit. Floor filters (paint stop) capture paint particles, and the air passes through the final exhaust filters before release. FLASH-OFF PROCESS After painting, the booth continues operation for approximately 15 minutes to remove residual solvents and thinners. During this process, fresh outside air continues to circulate in the booth. DRYING PROCESS In this phase, 80% of the air circulating through the booth is heated to 60°C and introduced to the booth via a distributor. As 20% of solvent is released during drying, it is expelled together with this exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted via the control panel as required. COOLING PROCESS After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system is restarted. During the 5-minute cooling phase, fresh air from outside circulates within the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels manage the functions and operation of the machinery and devices installed in the booth. The panel is constructed from durable galvanized sheet and steel profiles, and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel includes essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for booth relocation if necessary. • Operating equipment runs on 380 V 50 Hz, while control units use 220 V. • Booth operating time can be monitored on the electronic control panel for easy maintenance tracking. • Temperature and time settings for paint flashing, intermediate drying, and final drying can be easily adjusted via the digital display on the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, WARCOM HIDRAULINĖ GILJOTINA 6000 X 8 MODELIS MAXIMA 60-08 Iodpfx Aszilt Ssf Hotk

Būklė: naudotas, Gamybos metai: 2022, veikimo valandos: 1 063 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 11973, Modelis / Tipas: RUF 11/2800/60 Mašinos Nr.: 11973 Gamybos metai: 2022 Pavaros variklis: 11 kW Našumas iki max.: 150 kg/val. (priklauso nuo medžiagos) Presavimo slėgis: 2800 kg/cm² Briketų formatas: ⌀60mm Darbo valandos: apie 1063 val. Garantija: 12 mėnesių po pristatymo Prieinamumas: apie 4–8 savaitės po avanso gavimo Detalės: + Siemens TP 700, Siemens S7-1200 Ijdsygrt Iopfx Af Hjtk + 600 x 1500mm bunkerį su prailginimu + Pneumatinis emulsijos siurblys

Būklė: naudotas, Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 600 mm, garantijos trukmė: 12 mėnesiai, įėjimo įtampa: 400 V, bendras aukštis: 1 250 mm, bendras plotis: 1 000 mm, bendras ilgis: 1 080 mm, triukšmo lygis: 65 dB, We offer for sale the PC 60/130 T Parts Washer Catalog number: 1.626-704.0 Year of manufacture: 2016 All devices purchased from us are covered by a 12-month WARRANTY. Equipment included: • Operating hours counter • Stainless steel safety grate • Swiveling caster wheels, 2 lockable • Timer switch • Water level control Technical data: • Pressure: 1.5 / 0.15 bar / MPa • Pump capacity: 4,500 l/h • Power supply: 5.5 kW • Working diameter: 600 mm • Working height: 310 mm • Casing / frame: Stainless steel (1.4301) • CE tested • Heater output: 4.5 kW Itodswzwuzepfx Af Hsk • Max. temperature: 80°C • Adjustable washing time: 1 / 30 min • Load capacity: 130 kg • Sound pressure level: 65 dB(A) • Tank volume: 100 l • Number of phases: 3 Ph • Frequency: 50 Hz • Voltage: 400 V • Dimensions (L x W x H): 1080 x 1000 x 1250 mm The washing process is fully automated, and user-friendly operation is ensured by a clear control panel and indicator lights displaying all work stages. The washing liquid temperature is maintained between 35 and 80°C and is controlled via thermostat. Thanks to special housing profiles (mechanical labyrinth seals), the PC 60/130 T does not require short-lived rubber seals. Gas struts (with dampers) guarantee effortless lid opening, and a ball valve makes draining the washing liquid easy. The Kärcher parts washer works in a closed-circuit system (by means of an electric pump) with a water-based, non-solvent cleaning solution, ensuring operators are not exposed to toxic gas emissions.

Būklė: naudotas, Gamybos metai: 2022, Laser power in watts: 130 / 150 peak Working area: 1300x900 mm Dimensions (LxWxH): 2200x1350x1150 mm Weight: 500 kg Used laser engraving and laser cutting machine WINTER LASERMAX MAXI 1390 - 150 W Laser engraving and laser cutting machine - Year of manufacture: 2022 - Function-tested, excellent condition - Working area X, Y: 1300 x 900 mm - Electrically adjustable worktable, height up to 200 mm - CO2 laser power: 150 W - Engraving speed: 0–1200 mm/s - Cutting speed: 0–600 mm/s - Repeatability / resolution: ±0.01 mm / 1000 dpi - Minimum font size: 1 mm - Linear guides on X and Y axes - X, Y drive with high-precision toothed belt system via stepper motors - Operating systems: Windows XP, Vista, Windows 7, Windows 8 Iedsyk H S Topfx Af Hjtk - Control via LCD display - USB interface with 128 MB RAM - Red positioning laser for reduced setup times - Freely definable zero point on the working area for flexible operation and easy positioning - Maximum power consumption: 1000 W - Compatible formats: BMP, HPGL (PLT), DXF, G-CODE, DST, AI (AutoCAD, CorelDraw) - Electrical connection: 230 V, 50/60 Hz - Cutting depth depends on material (Acrylic cutting performance approx. 20 mm) - Openings at the front and rear for processing longer workpieces - Active water cooling (CHILLER 5000) for stable laser system operation and extended laser tube lifespan - Rotary attachment for engraving cylindrical and round objects up to Ø 120 mm and 400 mm in length, 3-jaw chuck for workpieces with max. diameter of 50 mm - Suitable for wood, ceramics, glass, and plastic - Machine dimensions: L=1900, W=1350, H=1100 mm - Packaging dimensions: L=2200, W=1350, H=1150 mm - Weight: 500 kg

Gamybos metai: 2005, būklė: naudotas, Techninės specifikacijos: Apdirbamo gaminio ilgis: - mm Apdirbamo gaminio aukštis (maks.): - mm Ijdpsyzhnlefx Af Hotk Apdirbamo gaminio plotis (maks.): - mm Krepšio matmenys: 840 x 540 mm Šildymo galia: 650 W Talpa: 80–120 l Dažnių diapazonas: 50 Hz Įtampa: 230 V Temperatūros diapazonas: 15–48 °C Vartojamoji galia: 700 W Didžiausia apkrova: 250 kg Apytikslis mašinos svoris: 60 kg Matmenys (ilgis x plotis x aukštis): 1,1 x 0,97 x 6,9 m „Bio-Circle Maxi“ valymo sistema – aukštos kokybės pramoninis įrenginys, skirtas efektyviai ir ekologiškai valyti detales. Biologinė valymo sistema – be agresyvių cheminių medžiagų Galima nuolatinė eksploatacija (savivalantis skystis) Integruotas šildytuvas, užtikrinantis optimalų valymo pajėgumą Valymas tiesiogiai šepečiu, skysčiui tiekiamas Idealiai tinka dirbtuvėms, pramonei, mašinų gamybai ir automobilių priežiūrai. *

Būklė: naudotas, Gamybos metai: 2019, mašinos/transporto priemonės numeris: 269913, Funkcionalumas: visiškai funkcionalus, galia: 0,5 kW (0,68 AG), įėjimo įtampa: 230 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: Oro kondicionierius, bendras ilgis: 1 140 mm, bendras plotis: 1 380 mm, bendras aukštis: 1 440 mm, bendras svoris: 230 kg, Įranga: CE žymėjimas, „PONY BP-B“ – profesionalus drabužių lyginimo presas (2019 m.) Pramoninis garinis-pneumatinis presas, skirtas lyginti kelnes, juosmenis ir struktūruotus drabužius. „PONY BP-B“ – profesionali pramoninė drabužių lyginimo mašina, pagaminta „PONY S.p.A.“ (Italija) 2019 m. Šis garinis-pneumatinis presas skirtas nuolatiniam gamybos procesui ir užtikrina aukštą kokybę lygintuvant kelnes, juosmenis, švarkus, paltus ir kitus struktūruotus drabužius. Mašina naudoja garą, suspaustą orą ir integruotą vakuumo sistemą, kad užtikrintų nuoseklų ir be raukšlių rezultatą, kartu išlaikant aukštą našumą. Mašina buvo naudojama profesionalioje drabužių gamyboje ir visiškai veikė iki gamyklos uždarymo. Techninės specifikacijos • Gamintojas: „PONY S.p.A.“ Ijdpfxszkhy Ro Af Hjtk • Modelis: BP-B • Gamybos metai: 2019 m. • Serijos numeris: 269913 • Pagaminimo šalis: Italija • Maitinimo įtampa: 230 V, vienfazė, 50 Hz • Galios sąnaudos: 0,5 kW • Darbinis garo slėgis: iki 5 bar • Pneumatinis veikimas: reikalingas išorinis suspaustas oras • Vakuumo sistema: integruotas „Lowara“ vakuumo įrenginys • Svoris: apytiksliai 230 kg Pagrindinės funkcijos • Profesionalus garinis-pneumatinis drabužių lyginimo presas • Integruota vakuumo ištraukimo sistema • Garu šildoma lyginimo galvutė ir pagrindas • Skirtas lyginti kelnių viršutines dalis, juosmenis, švarkus ir struktūruotus drabužius • Reguliuojamas pneumatinis lyginimo slėgis • Valdymas kojiniu pedalų • Dvigubos saugos rankiniai valdikliai • Avarinis sustabdymo mygtukas • Tvirti pramoniniai komponentai • Tinka nuolatiniam gamybos procesui Įskaičiuota • „PONY BP-B“ drabužių lyginimo presas • Integruota „Lowara“ vakuumo sistema • Garinės ir pneumatinės jungtys • Kojinių pedalų valdikliai • Pramoninis korpuso pagrindas • Apsauginės užtvaros • Elektroniniai valdikliai Pritaikymas • Kelnių apdaila • Juosmenų lyginimas • Švarkų apdaila • Paltų apdaila • Darbo drabužių gamyba • Drabužių gamyba • Komercinės skalbyklos • Tekstilės apdailos padaliniai Būklė • Visiškai funkcionalus • Anksčiau naudotas profesionalioje drabužių gamyboje • Atlikta techninė priežiūra 2026-02-27 • 2026-03-05 užfiksuotas vaizdo įrašas, kuriame parodytas mašinos veikimas • Gera pramoninė būklė • Įprasti kosmetiniai nusidėvėjimai, atitinkantys gamykloje naudojimo sąlygas • Prieš išmontavimą galima apžiūrėti Vieta Valga, Estija Išmontavimas ir transportavimas Pirkėjas atsako už garo, suspausto oro ir elektros jungčių atjungimą, išmontavimą, pakrovimą, transportavimą ir visas su tuo susijusias išlaidas. Dėl mašinos pramoninių prijungimų rekomenduojamas profesionalus išmontavimas. Pardavimo sąlygos Parduodama „tokia, kokia yra“, esant tokioje vietoje, be jokių garantijų. Tai yra dalis „MASI JEANS“ gamyklos likviduojamo turto.

Būklė: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 68235-1411-265, bendras svoris: 1 600 kg, bendras aukštis: 2 850 mm, bendras ilgis: 1 415 mm, bendras plotis: 1 415 mm, reikalingas aukštis: 3 200 mm, įvesties srovės tipas: Oro kondicionierius, Įranga: Tipinė plokštelė prieinama, Parduodame naudotą „Lang Technik Eco Tower 60“ automatizuotą įrenginį, pagamintą 2014 m. Pagaminimo metai: 2014 m. lapkričio mėn. Iodpfxszvc Rhs Af Hetk Serijos numeris: 68235-1411-265 Tipas: Eco Tower 60 Prekės numeris: 68235 Geros būklės, naudotas, sudarytas iš: 1 vnt. „ECO FEED“ automatizuoto detalėms įdėjimo įrenginio, pagaminto 2014 m. 1 vnt. „ECO TOWER 60“ automatizuoto detalėms įdėjimo bokšto, pagaminto 2014 m. 40 vnt. „Eco Grip 77“ veržliakų, pagrindinė dalis – plienas 20 vnt. „Eco Grip 77“ veržliakų, pagrindinė dalis – aliuminis 4 vnt. „Eco Grip 125“ veržliakų 1 vnt. veržliakų vežimėlis 1 vnt. „LANG Quick-Point“ tvirtinimo bokštas 1 vnt. pneumatinė sąsaja tarp valdymo ir tvirtinimo bokšto. 1 vnt. naudojimo instrukcija ir montavimo vadovas. Automatizuotas įrenginys yra pasirengęs pristatymui! Apžiūra galima bet kuriuo metu! Jei turite klausimų ar norite gauti daugiau informacijos, rašykite mums arba skambinkite.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 1 350 mm, SCM Wide Belt Calibrating and Fine Sanding Machine Model: dmc sd 60 RCS 135 Technical specifications: Working width: 1,100 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (hp) Feed gearbox motor: 0.45/0.8 (0.6/1.1) kW (hp) Feed speed: 4.5 / 9 m/min Standard equipment: - R140/85 rubber-coated calibrating roller, 140 mm diameter, 85 Shore – 1st position - R160/45 rubber-coated sanding roller, 160 mm diameter, 45 Shore – 2nd position - Hard sanding pad with manual working height adjustment - Motor power for 1st unit: 11 kW (15 hp) - Electronic ammeter for main motor current display - Electronic display of working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers Ijdjtwqn Sepfx Af Hetk - Anti-kickback device at infeed before first unit - Rubber feed belt, 60 Shore - Roller table with two rollers at infeed and outfeed of working table - Feed belt with two speeds (4.5 / 9 m/min) with gearbox motor - Automatic belt tracking Including the following special accessories: 1 pc. Version “B” for RCS, including: pneumatic on/off switching of roller on 1st unit “R”, pneumatic on/off switching of roller on 2nd unit “CS”, “MESAR” elastic segmented sanding pad, pneumatic on/off switching of sanding pad unit, electronic programming unit “LOGIC 50”, electronic adjustment of working height 1 pc. CE safety compliance 1 pc. roller table at infeed and outfeed for long workpieces, fitted with 5 non-driven rollers 1 pc. “RA” skewed-ribbed steel contact roller, 1st unit 1 pc. main motor 15 kW 1 pc. sanding belt wear optimizer 1 pc. LED internal lighting 1 pc. rear door with inspection window 1 pc. Logic SC control system

Būklė: naudotas, Gamybos metai: 2018, Dimensions (L/W/H): 2200x1350x1150 mm Weight: 500 kg Total power requirement: 1 kW CO2 Cutting and Engraving Laser WINTER LASERMAX MAXI 1390-150W - Year of manufacture: 2018 - function tested, excellent condition - Working area X, Y: 1300 x 900 mm - Electrically adjustable work table, height up to 200 mm - CO2 laser power: 150 W - Engraving speed: 0-1200 mm/s - Cutting speed: 0-600 mm/s - Repeatability / resolution: ±0.01 mm / 1000 dpi - Minimum font size: 1 mm - Linear guides on X and Y axes - X, Y drive via high-precision toothed belt with stepper motors - Operating systems: Windows XP, Vista, Windows 7, Windows 8 - Control via LCD display - USB interface with 128 MB working memory - Red positioning laser to reduce setup times - Freely definable origin on the worktable for flexible operation and easy positioning - Maximum power consumption: 1000 W - Compatible formats: BMP, HPGL (PLT), DXF, G-CODE, DST, AI (Autocad, CorelDraw) - Electrical connection: 230 V, 50/60 Hz - Cutting depth depends on material (cutting capacity for acrylic approx. 20 mm) - Front and rear openings for feeding through longer workpieces - Active water cooling CHILLER 5000 for stable laser system operation and long tube life Itjdpfxev Dmrpo Af Hok - Rotary attachment for engraving cylindrical and round objects up to Ø 120 mm and 400 mm length, 3-jaw chuck for components up to 50 mm diameter - Suitable for wood, ceramics, glass, and plastic - Dimensions: L=1900, W=1350, H=1100 mm - Packaging dimensions: L=2200, W=1350, H=1150 mm - Weight: 500 kg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Stelažai stiklinių pervežimui 60 vietų kroviniui Maksimalus krovos aukštis: 1300 mm Maksimali krovos talpa: 1500 kg Sandėlyje yra 5 vnt. Ijdpsznlrfofx Af Hjtk Naujas, nenaudotas! Prieinamas iš karto.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, bendras ilgis: 3 850 mm, bendras plotis: 1 650 mm, bendras aukštis: 2 680 mm, garantijos trukmė: 12 mėnesiai, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, Machine Description The SPB 110T x 3200 (HACO60) press brake is a modern CNC machine designed for precise sheet metal bending in both single-part and series production. It is equipped with an electro-hydraulic servo system, ensuring high accuracy, stability, and repeatability. Thanks to CNC control and synchronization via linear scales, precise positioning of the ram and consistent bending along the entire working length are guaranteed. The automatic crowning system compensates for deflection depending on the pressing force and ensures constant bending angles. Its robust construction, quick-release system, and precise back gauge ensure high productivity and reliability. Technical Data Basic Data: Pressing force: 1100 kN (110 t) Working length: 3200 mm Frame gap: 2700 mm Throat depth: 400 mm Stroke: 200 mm Max. opening: 480 mm Speeds: Rapid approach: 180 mm/s Working speed: 13 mm/s Return speed: 170 mm/s Drive & Control: Motor power: 8.5 kW CNC control: HACO 60 (USA) Isdpfey D Nvijx Af Hotk Axes: 4 + 1 additional axis Accuracy: Ram repeatability: ±0.01 mm Ram positioning accuracy: ±0.02 mm Back gauge repeatability: ±0.02 mm Straightness: 0.3 mm / 1 m Angle deviation: ±1–1.5° (up to 4 m) Resolution: 0.005 mm Dimensions: Machine dimensions: 3850 × 1650 × 2680 mm Key Features • Electro-hydraulic servo system • CNC-controlled crowning system • Linear scales on both sides • Precision back gauge • Ball screw drive with servo motor • Quick-release system • Adjustable sheet supports

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, veikimo valandos: 5 500 h, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, padavimo ilgis X ašis: 1 750 mm, padavimo eiga Y ašimi: 1 800 mm, padavimo ilgis Z ašis: 60 mm, X ašies padavimo greitis: 120 m/min, Y ašies padavimo greitis: 120 m/min, pjovimo plotis (maks.): 1 750 mm, pjovimo aukštis (maks.): 60 mm, suslėgto oro jungtis: 6 juosta, Automatinė konvejerinė pjovimo mašina OROX ICUT C600, pagaminta 2022 m., puikios darbinės būklės. Mažai naudota, nedidelė darbo valandų rida. Pilnas komplektas: - OROX ICUT C600, pjovimo sritis 180x175 cm, su visais standartiniais priedais - FLESE išmanusis peilis - COVER antroji plėvelės spaudimo sistema - POPS išmanioji ženklinimo/pažymėjimo sistema - Ištiesimo stalai: iš viso 12 m (10 m su oro pagalve + 2 m standartiniai) Techninės specifikacijos: - Maks. pjovimo aukštis: 6 cm (sutankintas sluoksnis) - Maks. pjovimo greitis: 60 m/min - Ašies greitis: 120 m/min, pagreitis 0,8 G - Galia: maks. 19 kW / vidutinės sąnaudos 8–9 kW - Maitinimas: trifazis 400V 50Hz - Suspaustas oras: 150 l/min prie 6 bar - Svoris: apie 2 700 kg - Operacinė sistema: Windows 10, Intel i5 Funkcijos: EVAS elektroninė vakuuminė sistema, RIVER SYSTEM nepertraukiamas pjovimas, lazerinis zonos nustatymas, automatinė diagnostika, duomenų perdavimas belaidžiu/LAN ryšiu, CAD sąsaja ISO/DXF, automatinis stalo valymas, peilio galandinimo sistema. Tinka: audiniams, dirbtinei odai, porolonui, baldiniam porolonui, laminuotoms medžiagoms, techniniams tekstilės gaminiams. Vietovė: Kaunas, Lietuva (ES). Galima apžiūrėti iš anksto susitarus. Itedpfszb U Hmjx Af Hok

Būklė: labai geros būklės (naudotas), Laser System with Laserline Diode Laser and Lascon Controller Here we offer you a Lascon laser system with Lascon Controller LPC03. Laserline Diode Laser The diode laser "LDM 500-60" has a wavelength of 935 nanometers and an output power of 550 watts. Laser Type: LDM 500-60 Wavelength: 935 nanometers ±10% Laser Power: 550 W Mains Voltage: 100-264V ± 10% Maximum Power Consumption: 1.7 kW Frequency: Single phase, 47–63 Hz Type: LDM 500-60 Lascon Controller LPC03 Ijdpfozdqkrox Af Hjtk The LPC03 features the performance of a full-fledged PC in a very compact design. Instead of a hard drive, a removable flash disk is installed. The absence of a hard drive and the minimal heat generation make the LPC03 particularly suitable for measuring, control, and regulation applications in industrial environments. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is simply connected at the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical Data: Motherboard: Half-size CPU card Slots: 1 x PCI, max. length 180 mm Drives: None Storage medium: Removable flash disk Connections: Front USB; rear Ethernet, RS232, VGA, keypad, mouse, USB Housing: 212 mm x 80 mm x 250 mm (H x W x D) Protection class: Front: IP40 Ambient temperature: 15°C - 40°C Type: LPC03 Condition: Used Scope of delivery: (see picture) (Subject to changes and errors in the technical data. All information is subject to confirmation!) If you have any further questions, we will be happy to answer them by phone.

Būklė: naudotas, Gamybos metai: 2014, veikimo valandos: 3 545 h, mašinos/transporto priemonės numeris: 2168, variklio tipas: dyzelinis, gamintojas: Renault Isdpfozcbcdsx Af Hstk

Būklė: geras (naudotas), Gamybos metai: 2015, Double-edger with electric adjustment via joystick or programmable control (manufacturer: Weintek Austria). Alignment of the beam using 3 transverse chains (can be controlled individually or synchronously). Isdpfx Afjwy Hv Ee Hstk Max. cutting length: 4.2 m Cutting kerf indicator with 2 lasers Saw motors: each 6.5 kW Max. cutting width: 0.6 m Max. cutting height: 80 mm Min. cutting height: 60 mm

Būklė: geras (naudotas), Vieliniamasis suvirinimo aparatas Sandėlio numeris: 2793 Gamintojas: CEA Pagaminimo metai: Tipas: Maxi-compact 370 2100 HE 1252 Itjdpsx Uwcfofx Af Hjk Įrenginio numeris: 9004382 Suvirinimo srovė prie 35 % ID: 370 A 32 V prie 60 % ID: 300 A 29 V prie 100 % ID: 230 A 25 V Maitinimas: 18 kVA Aušinimo tipas: Įranga: Žarnų komplektas prijungimui; degiklis; mobilus Matmenys: 1.000 x 700 x 1.000 mm Svoris: 0,5 t

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, veikimo valandos: 21 200 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 190332, Įranga: dokumentacija / vadovas, From 01.07.2025, used machines can also benefit from a special depreciation allowance of 30% per year for tax purposes. Injection Moulding Machine, 3-colour or 2-colour (the 3rd unit can be deactivated via software) (horizontal/vertical, and the 3rd in L-position with safety enclosure) ##### Can also be converted to 2-colour operation ##### Available immediately from our stock in Hanover Itedpfjgrzh Eox Af Hsk Manufacturer: Arburg Model: 420C 1000-150/150/60 Year: 2003 Machine number: 190332 Control system: Selogica Operating hours: only 21,200 h +++++ Clamping Unit +++++ Control: Selogica Clamping force: 1000 kN / 100 t Tie bar distance: 420 x 420 mm Platen size: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic ++++ Injection Unit 1 (150 unit) ++++ Screw diameter: 15 mm (high-wear resistant) Shot volume: 17 ccm Shot weight: 15 g Injection pressure: 2750 bar ++++ Injection Unit 2 (150 unit) ++++ Screw diameter: 15 mm (high-wear resistant) Shot volume: 17 ccm Shot weight: 15 g Injection pressure: 2750 bar ++++ Injection Unit 3 (60 unit) ++++ Screw diameter: 15 mm (high-wear resistant) Shot volume: 17 ccm Shot weight: 15 g Injection pressure: 2080 bar Extras 1 x ALLROUNDER 420 C 1000 - 150 / 150 / 60 1 x Vertical injection unit mounted on supports for 2nd injection unit (instead of on tie bars), manually operated, working position adjustable between 70 and 250 mm VE-404/02 2 x core pull 1 x open nozzle 15 mm, wear-resistant, without heating band (1st inject. unit 150) VE-902/00 1 x technology level 2 – servo-regulated hydraulic system with two regulated pumps for controlled machine movements, with travel-dependent, regulated ramping. Mould closing force build-up is programmable and regulated. The clamping force is held servo-regulated via the second pump. The build-up of nozzle contact force is programmable. Contact force manually adjustable; value is electronically maintained. 1 x technology level 3 hydraulic system with 3 regulated pumps for simultaneous movements of the main axes and faster secondary axis movements. On 2-component machines, this serves as hydraulic system for 2nd injection unit (technology level 2 required, VE 132/03) VE-130/40 1 x heating band for open nozzle VE-320/00 1 x 150 injection unit for vertical injection into the mould split line for 2-component processing VE-136/02 1 x position-regulated screw with control valve on the injection unit, including regulated back pressure, nozzle contact force manually adjustable VE-561/20 1 x position-regulated screw with control valve on multi-component machines – for 2nd injection unit VE-561/30 1 x 60 injection unit for horizontal injection into the mould split line as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 x for VE-906/00: 60 injection unit in L-position; unit lowered by 70 mm, including special separating plane, full protection VE-907/00 1 x 15 mm plasticising cylinder set (without nozzle), with relocated feed and pressure reducing valve, in highly wear-resistant design with sintered metal check valve (L-position) VE-908/00 1 x open nozzle 15 mm, wear-resistant, without heating band (L-position) VE-909/00 1 x nozzle tip with radius 15 (L-position) VE-910/00 1 x heating band for open nozzle (L-position) VE-911/00 1 x position-regulated screw for the third injection unit

Būklė: naudotas, Angebot für 1 von 2 BD Max PCR-Maschinen Das BD MAX System ist für die In-vitro-Diagnostik (IVD) zugelassen und dient zur Durchführung von durch die FDA zugelassenen Nukleinsäuretests in klinischen Laboren. Es ermöglicht die automatisierte Extraktion und Reinigung von Nukleinsäuren aus verschiedenen Probenarten sowie die automatisierte Amplifikation und Detektion spezifischer Nukleinsäuresequenzen mittels fluoreszenzbasierter PCR. Das BD MAX System bietet: - Unabhängige Nukleinsäure-Extraktion und -Reinigung mit integriertem Extraktor - PCR-Amplifikation in 24 thermisch geregelten Kanälen - Echtzeit-Detektion der Amplifikationsprodukte - Identifikation jeder Probenpufferröhre über externen Barcode-Scanner - Verifizierung der Probenliste mittels internem Barcode-Scanner - Fluoreszenzdetektion bei bis zu fünf Wellenlängen zur Durchführung von Multiplex-Reaktionen (Ct-Auswertung oder Schmelzkurvenanalyse) - Qualitative, quantitative und schmelzpunktbasierte Probenanalysen Ausstattungsmerkmale: - Integrierte und vollautomatische Extraktions- und Thermocycling-Schritte - Verarbeitung und Analyse von bis zu 24 Proben pro Lauf - On-board Lyse und Extraktion mit vorgefüllten Reagenzstreifen - Echtzeit-PCR mit zwei 24-Kanal-Mikrofluidik-PCR-Readern - Hochleistungs-Multi-Farb-Optik: 475/520, 530/565, 585/630, 630/665, 680/715 nm - Konsistente Ergebnisse durch standardisierte Workflows und Protokolle - Schnelles und kontinuierlich wachsendes Testmenü sowie offene Systemoptionen zur Anpassung an neue diagnostische Anforderungen - Weniger als eine Minute Hands-on-Zeit pro Probe Itedpfxexzgw Ao Af Hok Elektrische Anforderungen: 100 bis 240 V, 50/60 Hz, 10 A, maximal 300 VA Abmessungen: Gewicht: 113 kg (250 lbs) Tiefe: 72,4 cm (28,5 Zoll) Höhe: 94 cm (37 Zoll) Breite: 75,4 cm (29,7 Zoll)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2017, veikimo valandos: 10 020 h, spaudimo jėga: 173 t, valdiklių gamintojas: TRUMPF, valdiklio modelis: TASC 6000, 2017 m. pagamintas spaudos stabdys. Šis TRUMPF TRUBEND CELL 5000 su TRUMPF TruBend 5170 pasižymi didžiausia 1700 kN spaudimo jėga ir 445 mm eigos ilgiu. Jame yra robotas "BendMaster 60", skirtas automatizuotam valdymui, ir valdymo sistema TRUMPF TASC 6000, skirta efektyviam programavimui. Jei ieškote aukštos kokybės lenkimo galimybių, apsvarstykite mūsų parduodamą TRUMPF TRUBEND CELL 5000 presinį stabdį. Susisiekite su mumis dėl išsamesnės informacijos. - Preso stabdžių modelis: TruBend 5170 (išplėstinė versija)- Maksimali spaudimo jėga: 1700 kN- Maksimalus darbinis slėgis: 340 barų- Preso stabdžio eigos ilgis: Stūmiklio ilgis: 445 mm- Preso stabdžio įtampa / dažnis: 400 V / 50 Hz- Preso stabdžio prijungtoji apkrova: 29 kVA- Preso stabdžių valdymo įtampa: 24 V- Roboto modelis: BendMaster 60- Prijungto roboto apkrova: 17 kVA- Roboto svoris: 2600 kg- Roboto įtampa / dažnis: 400 V / 50 Hz- Valdymo sistema: TRUMPF TASC 6000 (grafinis dirbtuvių programavimas, tinklo galimybė)- Included Equipment: Išplėstinės versijos presinis stabdys, "BendMaster 60", automatinis medžiagų tvarkymas / griebtuvai, aptvarai ir apsauginiai gaubtaiTRUMPF BENDMASTER 60- Darbo valandos: 56 582 val. (2025 m. gegužės 14 d. duomenimis)- Keliamoji galia: 60 kg (lakštinio metalo ruošinys ir griebtuvas)- Lakštinio metalo talpa: Iki 40 kg- Maitinimo įtampa: 400 V (3~ fazė)- Dažnis: 50 Hz- Prijungta apkrova: 14 kVA- Valdymo įtampa: 24 V- Max. Saugiklių galia: 24 V: 32 A- Manipuliatoriaus ašių sistema: 6 ašių atgalinio matavimo jutiklių sistema- Grindų vėžės: Grindinio bėgio bėgis, pratęstas iki 10 m- Valdymo blokas: TRUMPF kompiuterinis valdymas su terminalu (monitorius, pelė, klaviatūra)- Medžiagų tvarkymo funkcijos: Kontūro lapo atpažinimo jutiklis, dvigubo lapo atpažinimo jutiklis, sukamoji sąjunga greitam griebtuvo keitimui be įrankių, griebtuvo jungtis ant "BendMaster- Į komplektą įeina Vakuum / griebtuvo pavara: 3 moduliniai vakuuminiai griebtuvai be atskyrimo bloko, 1 mechaninis liežuvinis griebtuvas su sukamąja ašimi (įskaitant 3 papildomų žandikaulių komplektus)- Padavimo stotis: 1 lakštų ištraukimo stotis su linijine ašimi- Periferiniai priedai: 1 griebtuvų keitimo pultas (ne daugiau kaip 4), 1 mobilus ventiliatoriaus magnetas, apsauginis aptvaras su įėjimo durimis Iodpfx Aoza U Nfjf Hjtk Technical Specification Bending Length 4250 mm

Būklė: naudotas, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel (X/Y/Z): 500 mm / 350 mm / 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Max. table load: 250 kg Table height: 1004 mm Distance spindle nose – table: 94 – 704 mm Spindle overhang – column: 405 mm Spindle speed: 50 – 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Iedpfxoy N Du De Af Hotk Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 V, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Linear direct measuring system - 200 L coolant unit external - Spindle cooling unit external - Central lubrication Vogel - Air supply: 6 bar, 40 – 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Dimensions (L x W x H): 2000 x 1700 x 3000 mm Weight: approx. 3.2 t Good condition

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Special Offer – €45,000 EXW valid until September 1, 2026 DIP-TECH AR 6000 (2013) + Integrated Drying Module Itodpeymb Tqofx Af Hjk After this date the machine will be dismantled and sold as spare parts. This is the last opportunity to purchase a complete, fully operational system. Technical specifications: • Max glass size: 3000 × 6000 mm • Min. glass size: 500 × 500 mm • Glass thickness: approx. 4–19 mm • Printing technology: Digital ceramic ink printing directly on glass • Drying module: Integrated dryer included • Ink type: Ceramic inks – tempering compatible • Printing technology: Digital ceramic in-glass printing • Application: Architectural & interior glass • Glass types: Float, tempered, laminated Key Advantages ✔ Large-format industrial printer (6-meter capability) ✔ Integrated drying module – faster production cycle ✔ Improved ink stabilization before tempering ✔ Reduced print defects and handling risks ✔ Suitable for façade, architectural and interior glass ✔ Machine in production – ready for immediate operation Inspection possible under power.