Norgren 4546666000000000 pirkti naudotą (14)

Būklė: naudotas, 454666600000, NORGREN, metering cylinder, adhesive cylinder, and synchronous motor Nedpfx Aeuz D Ndocpjwf Model: 454666600000 Condition: Used

Būklė: beveik kaip naujas (naudotas), Norgren I374997 Nwodpjt T Hlkofx Acpof

Būklė: naudotas, Pneumatic cylinder, air cylinder, pneumatic piston, air piston - Stroke length: 150 mm - Piston diameter: 63 mm - Quantity: 6 units available - Price: per unit Nwedpfx Acjd Hvh Ejpsf - Dimensions: 460/75/H105 mm - Weight: 3 kg/unit

Būklė: naudotas, Pneumatic cylinder, air cylinder, pneumatic piston, air piston, round cylinder Nwodpfx Aod Hvhvocpsf - Stroke length: 400 mm - Piston diameter: 25 mm - Quantity: 2 units available - Price: per piece - Dimensions: 580/28 mm - Weight: 0.7 kg/piece

Būklė: naudotas, Pneumatic cylinder, air cylinder, pneumatic piston, air piston - Stroke length: 115 mm - Piston diameter: 50 mm - Quantity: 6 units available Nodpfx Aced Hvhtjpswf - Price: per piece - Dimensions: 400/65/H90 mm - Weight: 2.3 kg per unit

Būklė: naudotas, Pneumatic cylinder, air cylinder, pneumatic piston, air piston - Stroke: 260 mm - Piston diameter: 80 mm Nwoded Hvhxspfx Acpof - Quantity: 2 units available - Price: per unit - Dimensions: 610/95/H95 mm - Weight: 6.5 kg per unit

Būklė: naudotas, Pneumatic cylinder, air cylinder, pneumatic piston, air piston - Stroke length: 320 mm Nsdpfxod Hvh Ds Acpjwf - Piston diameter: 50 mm - Quantity: 2 units available - Price: per unit - Dimensions: 530/65/H90 mm - Weight: 2.9 kg per unit

Būklė: geras (naudotas), Linear drive, linear gearbox, lifting gearbox, spindle drive - Manufacturer: Norgren - Type: M/46025B/M/320 Njdsd Hui Hopfx Acpewf - Stroke: 320 mm - Piston: 25 mm - Dimensions: 520/70/H60 mm - Weight: 1.6 kg

Būklė: geras (naudotas), Pneumatic cylinder, air cylinder, pneumatic piston, air piston - Stroke: 60 mm Nwjdpfjd Hvh Tex Acpjf - Piston diameter: 40 mm - Quantity: 5 pieces available - Price: per unit - Dimensions: 255/55/H80 mm - Weight: 1.1 kg/unit

Būklė: geras (naudotas), Linear actuator, linear gearbox, lifting gearbox, transfer rail, conveyor rail - Linear actuator: with toothed belt - Stroke: 2480 mm - Drive shaft: hollow shaft Ø 14 mm - Note: without motor, can be supplied at extra cost Nsdpfxsii Sdzo Acpjwf - Transport dimensions: 2800/150/H135 mm - Weight: 24 kg

Būklė: naujas, IMI HERION / NORGREN presinis saugos vožtuvas PSV vožtuvas, dvigubas vožtuvas, krypties vožtuvas Tipas: XSz 10 V Id.-Nr. 2492982 Serijos Nr. 2608 Tapatybė su užsakymo Nr.: 2492951 Slėgis: 3–10 bar Suslėgto oro jungties sriegiai (A)+(B)+(P)+(S): 1/2" Suslėgto oro išėjimas (R): flanšinis pajungimas Tiekimo įtampa: 2x 24 voltų (DC) - Pagrindo plokštės tvirtinimo atstumas 115 x 63 mm, 4x tvirtinimo skylė Ø 6,5 mm - Su triukšmo slopintuvu ant suslėgto oro išėjimo (R) Vožtuvo korpuso matmenys (I x P x A): 105 x 90 x 220 mm Su triukšmo slopintuvu (I x P x A): 180 x 165 x 220 mm Svoris: 3,0 kg Naujas, nenaudotas, iš sandėlio likučių Nsdpfsw T U A Ssx Acpowf

Būklė: naujas, Connection G 1/4 Nodjd Ih N Sspfx Acpjwf Adjustable range: 0.7 – 8 bar Weight: 0.86 kg Pressure Regulator Housing: Zinc alloy Without pressure gauge Including operating instructions 10 units available!

Būklė: naudotas, Perkin Elmer Instruments Differential Scanning Calorimeter with Cooling, DSC 8000, N5340524 Model: DSC8000 Type: N5340524 Condition: Used General Information: Double-furnace differential scanning calorimeter with power compensation, Perkin Elmer DSC 8000 with Intracooler 2, enables precise heat flow measurements from approx. –70 °C to 750 °C, featuring high sensitivity and rapid thermal response. General Instrument Specifications DSC Type: Double-furnace design (independent sample and reference furnaces) Measurement Principle: Power compensation Furnace Material: 90% platinum alloy Temperature Sensors: Distributed platinum resistance thermometers Nwedpfx Acoyluicepof Temperature Performance Standard Temperature Range: approx. –180 °C to 750 °C (with appropriate cooling accessories) With Intracooler 2: approx. –70 °C to 750 °C Minimum Temperature (Intracooler 2): approx. –80 °C Heating Rate: 0.01 to 300 °C/min Cooling Rate: 0.01 to 150 °C/min Measurement Performance Dynamic Range: ±800 mW (typical) High sensitivity and rapid response due to low-mass furnace design Excellent baseline stability and temperature accuracy Gas and Atmosphere Control Two controlled gas lines with automatic switching Typical purge gases: Nitrogen, Helium, Argon Supports high gas purity (up to 99.999%) Interfaces and Connections USB Ethernet (LAN) Gas inlet ports Connection for cooling unit Power supply connection Accessory interfaces (e.g., autosampler, high-pressure cell, UV/photocalorimeter module) Interface for temperature calibration Technical Data 3.15 AMP T (5 x 20 mm) 250 V 100–240 VAC 50/60 Hz Maximum power 400 VA Accessories Cooling system PolyScience Intracooler 2 Norgren gas pressure regulator with gauges for external gas supply 96-position autosampler High-pressure DSC cells, UV/photocalorimeter accessories IEC power connector Documentation PolyScience Intracooler 2 Model: N5341746 P10N9E402E Voltage: 240 IP-100 Hz/A/Ph: 50/7.5/1 Refrigerant: 350 g R-404A Note regarding item condition: Sold without software/PC.

Būklė: naudotas, Gamybos metai: 2004, Turning diameter 250 mm Turning length 100 mm Control SIEMENS 840 D Total power requirement 35 kW Machine weight approx. 7,500 kg Space requirement approx. m E M A G Vertical CNC hard turning and grinding machine with tool turret and automatic workpiece loading Type VSC 250 DS Year of manufacture: 2004 # M7 28.69324 Max. turning diameter: 250 mm Turning length internal/external approx.: 100 mm Workpiece length min./max.: 29 – 100 mm 6-station tool turret diameter or swing diameter: 480/790 mm Slide travel X / Z (workpiece slide!) / stroke: 680 / 400 / 200 mm Feed / rapid traverse X/Z: 45 / 30 m/min. Nwodpfx Acet Hxa Tspjf Feed force X/Z: 5.5 / 11 kN Spindle speeds: 4,300 / 6,000 rpm Spindle drive approx. 28 kW Total drive approx. 35 kW - 380 V – 50 Hz Weight: 7,500 kg Accessories / Special Equipment • CNC path control SIEMENS 840 D with color screen, graphics, menu-guided dialog programming and all common options, cycles, and subprograms, etc. • 6-station hexagonal tool turret with 6 tool holders (∅ 40), non-driven, but with swivel axis (B-axis), double bearing and direction logic • 2 GMN grinding spindles on turret positions T3 and T6, speeds approx. 42,000 rpm and 18,000 rpm, one equipped with CBN wheel and 1x with ceramic pin • Workpiece loading device with recirculation system using drag frame for workpieces approx. 130 mm • MARPOSS MIDA – tactile measuring device at workpiece change for pre-measurement and finishing dimensions • NORGREN air gap measurement system (?), hydraulic weight compensation of main spindle • SMW-Autobloc 3-jaw membrane chuck (for easier pick-up of raw parts) approx. ∅ 250 mm, with clamping monitoring • HYFRA cooling unit for spindle cooling and thermal stabilization of the machine bed, sophisticated SEITZ paper band filter system and retractable chip conveyor, coolant chiller for grinding emulsion, oil mist extraction, magnetic separator, central lubrication, etc. Vertical CNC lathes offer a thermo-stable design (chips do not fall on the machine bed) and fast workpiece change times (pick-up system via main spindle) and a stable tool arrangement that also enables unconventional machining operations. Here, hardened gears were hard-turned and ground. Condition: good – ready for demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice.