Presso saugos vožtuvas, PSV vožtuvas, dvigubas vožtuvas, krypties vožtuvas, saugos vožtuvas

IMI HERION / NORGREN XSz 10 V

Būklė: naujas, spaudimo jėga: 100 t, eigos ilgis: 400 mm, - Cylinder stroke 400 mm - Working width 1010 mm - Cylinder is movable Dodpjgp Dc Rjfx Affjup - Electrically or manually operable - Pressure gauge - Emergency stop - 400V

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, mašinos/transporto priemonės numeris: 06 61 218, Ref. no.: Lg 32821 Single-Sided Decoiler BBT ABH 2000/400 Exhibition machine, unused Machine no.: 06 62 218 Year of manufacture: 2021 Technical Data Load capacity approx.: max. 2,000 kg Strip width: max. 400 mm Coil inner diameter: approx. 450 to 520 mm Coil outer diameter: max. 1,500 mm Unwinding speed: approx. 2 to 15 rpm Equipped with adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Expansion of the carrying segments is manual using a hand crank via joints. Number of carrying segments: 3 Coil side guidance by robust clamping limit arms. Decoiler stand built in sturdy box-section as welded construction. Additional Equipment: Shutdown “Loop too small” via antenna switch, mounted on the column of the loop control base housing. Height infinitely adjustable. Strip side guidance at the base housing of the loop control, with lateral guide rods. Pass-through width infinitely adjustable. Dedpfx Afeg U Utvefoup

Būklė: naudotas, Eccentric Punching Press HAULICK + ROOS Type RVD 125 Double Column Eccentric Press Machine No. 212560 Year of manufacture: 1981 Pressing force: 125 tons Table size: 880 x 800 mm Table opening: 470 x 140 mm Column gap: 900 mm Djdehlnzkspfx Affjup Side column spacing: 415 mm Ram stroke: 45 mm Ram adjustment: 0-80 mm Shut height as shown: 340 mm Strokes per minute: 50 to 300 spm Main drive motor power: 22 kW Power supply: 380 Volt, 50 Hz - Double connecting rod drive with 4-point eccentric shaft bearing for off-center ram force absorption - Free-standing electrical cabinet - NC roller feeder EBU, width 250 mm, year 2003 - Separate control panel for roller feed unit - Coil direction from left to right Space requirement (press) L x W x H: 3000 x 2000 x 3020 mm Transport height: 2950 mm Weight of press: approx. 11 tons

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2008, mašinos/transporto priemonės numeris: LSP 100T, Gamybinė hidraulinė spaudė su H tipo stovu 100 t su vedimu Dodpfxog Rn Efe Affsup Gamintojas: Stenhoj, Danija Pagaminimo metai: 2008 Maksimali spaudimo jėga: 1 000 kN / 318 bar Presavimo cilindras, eiga: 400 mm Presavimo stalas su T formos grioveliu 1 500x900 mm viršuje 1 500x1 050 mm apačioje Stovo pravaža: 1 700 mm Būklė: kaip nauja, mašina naudota tik bandomiesiems paleidimams ir nuo to laiko saugoma sandėlyje. Visa informacija pateikiama be garantijos. Be transportavimo išlaidų.

Gamybos metai: 2009, būklė: naudotas, Material width 320 mm Material thickness 8 mm Number of straightening rollers 9 Material cross-section 2000 mm² Machine weight approx. 4.2 t Duedsp U Uwispfx Affsp Space requirement approx. 2000x2000x2400 mm

Būklė: naujas, Gamybos metai: 2025, Band width: max. 38 mm Feed length: max. 50 mm Dedpfxo Ea U Hj Affsup Band thickness: 0.05...1.02 mm Strokes: max. 260 1/min at full feed length Feed force: 90 N Available with mechanical control valve or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2020, Pressure: 500 t Passage width: 1100 mm Stroke: 600 mm Dsdpfxoffamvo Affoup Approx. machine weight: 22.8 t Table size: 1100 x 800 mm Ram area: 1100 x 800 mm Installation height: 800 mm Hydraulics: 300 bar Closing speed: 60-200 mm/sec Pressing speed: 0 - 9.5 mm/sec Opening speed: 28-200 mm/sec Table height above floor: 900 mm Overall height above floor: 5100 mm Max. tool weight: 2000 kg Max. upper tool weight: 1000 kg Hall height: min. 6500 mm Number of press cylinders: 1 pc. Number of traverse cylinders: 2 pcs. Pump capacity: approx. 270 l/min Oil tank: 600 l Main motor: 75 kW Control technology by SIEMENS: S 7 Safety control: PILZ Multi

Būklė: naudotas, Material width: 304.8 mm Material thickness: 0.12 – 2.2 mm Feed length: 304.8 mm Clamping force of holding gripper: 850 N Clamping force of feed gripper: 4410 N Dsdscxxrxjpfx Affoup Feed force: 650 N Approx. machine weight: 0.15 t Approx. space requirement: 0.7 x 1.05 x 0.6 m

Gamybos metai: 1980, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 3253-80, Offer 22045 Technical data (approx.): - Pressing force: 10 t - Throat depth: 150 mm - Table size: 520 x 320 mm - Table height adjustment: 160 mm - Clearance hole in table: 165 x 125 mm - Max. installation height: 220 mm - Ram surface: 240 x 150 mm - Pin hole in ram: 30 mm Dujdpfx Asktg Dhsffep - Ram adjustability: 40 mm - Stroke adjustment: 4 – 60 mm - Strokes per minute: 130 1/min - Hydraulically actuated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive: 380 V / 1.1 kW - Required space (approx.): W 1000 x H 1800 x D 1100 mm - Weight (approx.): 1300 kg

Būklė: naudotas, Gamybos metai: 2021, mašinos/transporto priemonės numeris: HB 2022-A-073, Portal-type straightening press with 300 T capacity a) Idle and pressing speed up to 17 mm/sec Djdpfx Afsh Agnuefoup b) Opening speed up to 55 mm/sec c) Table size 2500 x 1600 mm d) Daylight opening 700 mm e) Overall dimensions (LxWxH) approx. 4500 x 2300 x 3700 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipples h) Table in grid construction, with T-slots as per customer request, otherwise 22 mm i) Operation via swiveling arm, mounted on the bridge j) Pressure adjustable from 50 T to 300 T via monitor k) Bridge travels using two gear motors with rack and pinion drive l) Cylinder moves left and right via rack and pinion drive m) Machine frame double-coated n) Cylinder induction-hardened Design Type of press: Portal press Thermally neutral 80 – 120 °C Number of operator sides: 3 Forces Max. press force: 3,000 kN Max. free stripping force: 500 kN Pressurization time (closed tool, steel-on-steel): max. 3 sec Dimensions Max. opening width: 700 mm Stroke and min. opening: 700 mm / 0 mm Table height above floor: approx. 900 mm Overall height above floor: approx. 3700 mm Minimum hall height: 5,000 mm Deflection Measured at max. closing force with 70% occupancy: ≤ 0.8 mm/m Weight Total weight of press without operating fluids and table plate: approx. 22 T Speeds Fast closing: 17 mm/sec Pressing speed: 8 mm/sec Opening: 55 mm/sec Noise Level Sound pressure level, measured at 1.5 m height at the operator panel: max. 78 dB(A) (DIN 45635-T16-KL3) Hydraulics Number of press cylinders: 1 Max. operating pressure: 350 bar Pressurization time: approx. 2–3 sec Pressing accuracy during stroke: +/- 5 bar Main Pump BOSCH REXROTH, approx. 93 L/min Oil volume: ca. HLPD 46 MW, 900 liters Ambient temperature max.: 45 °C Oil temperature max.: 55 °C Electrics Main power supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic main motor connection: IE3, 22 kW Total connected load: approx. 30 kW