Moriseiki Hmc Horizontalus Frezavimas pirkti naudotą (11 383)

Būklė: naudotas, Horizontal machining center with pallet changer STEINEL type BZ 24 FFZ with SIEMENS Sinumerik 850 M CNC control Serial no. 77 Year of manufacture: 1990 Crodpfodzqmrox Akksf Travel paths X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm, infinitely variable Tool holder ISO 40 Power supply 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool stations and double arm gripper - Pallet changer with 4 pallets - Horizontal pallet station during machining, axis movement = X-axis - Pallet rotation = B-axis - Ram spindle on Z-axis - Ram spindle with cross travel as Y-axis - Coolant spray nozzles on ram spindle and in working area - Coolant system with chip conveyor underneath the working area - CNC control SIEMENS Sinumerik 850 M - Interface for data transfer Required space (L x W x H): 9000 x 3100 x 3200 mm Weight: 13.5 tons Transport dimensions for truck: Machine with tool magazine (L x W x H): 9000 x 3000 x 3000 mm Chip conveyor (L x W x H): 4700 x 1000 x 1450 mm Container loading into a 40" OT HC possible. Good condition.

Būklė: geras (naudotas), Gamybos metai: 2000, MORI SEIKI SH-503/40 Dviguba padėklų CNC horizontalioji frezavimo staklė su MORI SEIKI MSX-502III valdymu. Padėklo matmenys: 500 x 500 mm. Maksimalus stalo apkrovimas: 1 000 kg. Ašių eiga: X=630 mm, Y=600 mm, Z=650 mm, B=1° žingsniu. Greita eiga (X,Y,Z): 32 m/min. Veleno kūgis: BT40. Maksimalus veleno greitis: 12 000 aps./min. (22 kW variklis). 120 pozicijų automatinis įrankių keitiklis (ATC). Didžiausias įrankio Ø150 mm (be gretimų įrankių), didžiausias ilgis: 360 mm, didžiausias svoris: 12 kg. Serijos Nr. 1212 (2000 m.). APRAŠYMAS: Su Renishaw OMP 600 veleno zondu, Blum lazerine įrankių nustatymo/pertrūkio sistema, dvigubu sraigtu į FSE drožlių konvejerį, aušinimo skysčio filtravimo sistema, alyvos aušintuvu, Filtermist dulkių ištraukimo įrenginiu, rankiniu ratuku ir signaliniu bokšteliu. Bendri matmenys: Ilgis 4 500 mm x plotis 2 725 mm x aukštis 3 267 mm. Svoris: 14 900 kg. Pastaba: Komplekte nėra įrankių ir taisytuvų (Tombstones). Crjdpfxexqt Tij Akkjf

Būklė: naudotas, Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Ob 21882, X ašies eiga: 15 000 mm, Y ašies eiga: 5 000 mm, Z ašies eigos atstumas: 1 915 mm, veleno greitis (maks.): 700 aps./min, bendras plotis: 6 400 mm, bendras ilgis: 19 300 mm, bendras aukštis: 10 370 mm, padavimo ilgis W ašis: 3 000 mm, ašies skersmuo: 250 mm, stalo aukštis: 400 mm, stalo ilgis: 8 000 mm, stalo plotis: 5 665 mm, bendras svoris: 137 000 kg, paskutinio kapitalinio remonto metai: 2006, šlifavimo veleno variklio galia: 83 000 W, įvesties srovės tipas: trifazis, Parduodame Škoda W250H grindų frezavimo staklį. Šis staklįs skirtas apdirbti sunkius ir didelius komponentus energetikos, laivų statybos, metalurgijos, kalnakasybos pramonės ir mašinų gamybos sektoriuose. Staklįs yra komplektuojamas su „Siemens Sinumerik 840D“ valdymo sistema, leidžiančia atlikti sudėtingas frezavimo, gręžimo ir apdirbimo operacijas. Galima pateikti visą techninę dokumentaciją. Pageidaujant, pateiksime papildomų nuotraukų, vaizdo įrašų ir informacijos apie staklių įrangą ir techninę būklę. Standartinė įranga: Įrankių ir matavimo prietaisų laikymo stovas, pritvirtintas prie veržlės dėžės. Papildoma įranga: Cjdpfszrwq Iex Akksrf Skysčiu aušinimo sistema 4000x3550 dydžio pasukamas stalas 3 kampinės galvutės

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1989, Iš karto laisva iš mokymo centro: Universalioji frezavimo staklė Horizontalio-Vertikali WMW Auerbach Tipas: FW 250 x 1000 / 2 Pagaminimo metai: 1989 Credpfozrbvnjx Akkef Stalas: 1250 x 250 mm Stalo apkrova: 1250 kg Eigos X/Y/Z: 700 / 400 / 500 mm Heidenhain trijų ašių skaitmeninis indikatorius SK 40 Veleno apsukos: 55 – 2800 aps./min Padavimai: 10 – 630 mm/min, be pakopų Vertikalioji galva Horizontaliojo frezavimo įranga Galia: 6,3 kW Svoris: 2,5 t Kaina: 2.000 Eur—be PVM, atsiėmimas iš vietos

Būklė: labai geros būklės (naudotas), For sale: a robust horizontal milling machine from the renowned manufacturer VEB Heckert Auerbach (GDR), model FW 250x1000. The machine is in very good condition, fully complete and operational—ready for use. ✔ Technical specifications: • Model: FW 250x1000 • Year of manufacture: 1979 • Manufacturer: VEB Werkzeugmaschinenfabrik Auerbach, Fritz Heckert Combine • Weight: approx. 1,700 kg • Worktable: 250 × 1000 mm, T-slots • Spindle speed range: 630 – 1800 rpm • Power supply: 3x380 V / 50 Hz • Power output: 5.8 kW • Control voltage: 220 V • Rated current: 16 A, protection: 25 A • Mechanical and automatic feeds on the axes ✔ Equipment: Crodpfx Aow Uab Nskkof • Heavy-duty machine vise mounted on the table • Work lighting • Cooling system • Full control panel with setting wheels and feed levers ✔ Advantages: • Very stable, heavy-weight design (1.7 t) – ideal for precise and repeatable machining • Renowned manufacturer—Heckert (GDR), known for indestructible machinery • Fully operational and complete – ready for immediate use • 1000 mm table – enables machining of larger workpieces Reliable machine, not a lightweight Chinese build—this is a classic from an era when equipment was built to last.

Būklė: naudotas, Horizontal machining center with dual pallet changer STEINEL Type BFZ 5 featuring SIEMENS Sinumerik 810 M CNC control Serial No. 34 Year of manufacture: 1988 Travel distances: X: 500 mm, Y: 400 mm, Z: 320 mm Clamping/table area: 500 x 400 mm Tool holder: ISO 40 Spindle speed: up to 6300 rpm, infinitely variable Main spindle drive: 12 kW Power supply: 380 Volt, 50 Hz, 30 kVA Credjutuyispfx Akkjf - Tool changer with 24 tool positions - Pallet changer with 2 stations - Data transfer interface - Coolant system with chip conveyor Required floor space (L x W x H): 4100 x 2500 x 2650 mm Weight: approx. 8 tons In good condition Transport dimensions: Machine (L x W x H): 3200 x 2500 x 2650 mm, approx. 7.5 tons Chip conveyor (L x W x H): 3500 x 1100 x 2100 mm, approx. 600 kg

Būklė: naudotas, Priešgingnis ir adapteris frezavimo staklėms horizontaliam frezavimui Priešgingnis ir adapteris (priešlaikis) frezavimo staklėms DECKEL (Guolio blokas su kregždės uodegos tvirtinimo adapteriu DECEL FP1 + FP2) Tipas 9570 Kregždės uodegos plotis siauras: apie 72 mm Kregždės uodegos plotis platus: apie 88 mm Kregždės uodegos aukštis: apie 15 mm Ilgis (guolio blokas): 133 mm Plotis (guolio blokas): 50 mm Crodpfxoxcbl Do Akkjf Bendras aukštis (guolio blokas): 105 mm Guolio skylė: Ø 17 mm (su bronzine guolių įvore) Ašių atstumas nuo skylės iki kregždės uodegos: apie 82,5 mm (centrinės ašies aukštis) - Adapteris tinka kregždės uodegai ir tvirtinimo paviršiui, pakilimas 22,5 mm iki 105 mm ašies aukščio Bendras ilgis (kregždės uodegos bėgis): 635 mm Svoris: 3,8 kg labai gera būklė

Būklė: naudotas, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Production Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of manufacture: 2016, Commissioned in 2017 with SIEMENS 840D SL (Solution Line) CNC path control, featuring 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swiveling gantry +/– 135° (270° total) B-axis 360° continuous Axis acceleration X + Y axis 6 m/s² Axis acceleration Z axis 9 m/s² Feed force X + Y axis 7500 N Feed force Z axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm Swiveling speed A-axis 180° rotation in 4 sec. Interference diameter in swivel bridge max. 1400 mm Transport load capacity in swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent tools occupied Ø 140 mm Tool diameter with adjacent tools free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Mains connection 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5–8 bar - Motor spindle LIFLEX MSP 80/63/85/12,000 (power 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary swivel table LICON as B and C axis, with hydraulic axis clamping - Zero-point clamping system on rotary table of swivel axis - Double pallet changer, without pallets (pallets need to be procured) - Media transfer via 5 single-acting pressure lines for oil or air, for workpiece clamping on pallets Hydraulic functions from 30–150 bar, with pressure monitoring (controllable via M-functions) Cjdpfx Aot Ac Efokkjrf - Tool changer with 30 tool stations, in disc-type turret design - Machine designed for dry machining with MMS (minimum quantity lubrication system) - MMS-IKZ, internal MMS lubricant supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient unit operation) - Direct measuring system on all axes - Readout operating hours, control voltage on = approx. 7500 h Space required for operation L x W x H 9000 x 5000 x 3800 mm Space required for transport L x W x H 6100 x 4400 x 3600 mm Base machine weight approx. 21 t Total weight: approx. 24 t Very good condition

Būklė: labai geros būklės (naudotas), Ratų skersmuo – maks. 175 mm Ratų plotis – 350 mm Modulis – maks. 3 Modulis – min. 0,5 Mašinos svoris – apie 0,9 t Codoznnitjpfx Akksrf Reikalingas plotas – apie 1,2 x 0,8 x 1,4 m

Gamybos metai: 1983, būklė: geras (naudotas), FGSV 32 TOS KURIM milling machine. Cjdoh Ir Rmjpfx Akkerf Year of manufacture: 1983 (Czech Republic). Specifications: Table: 320 x 1400 mm. Travels: X - 1000 mm, Y - 400 mm, Z - 450 mm. ISO 50. Spindle speed range: 35-1800 rpm. Distance between spindle and table: 140 - 590 mm. Distance between spindle and column: 120 - 520 mm. Max. table load: 500 kg. Main motor power: 11 kW. Power requirement: 15 kW. Dimensions (L x W x H): 2735 x 2425 x 2475 mm. Weight: 4200 kg.

Būklė: naudotas, Gamybos metai: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Crjdpfjt Hw D Rsx Akksf Machine weight approx. 2,400 kg Fully automatic hobbing machines for worm gear cutting Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. wheel diameter without parts magazine approx. 80 mm Max. wheel diameter with parts magazine approx. 50 mm Max. module 2 / 2.5 Axial cutting length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter – diameter 24 – 50/63 mm Max. radial travel of the milling slide 0–14/18 mm Max. milling cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed rate stepless 0.05 – 4.0 mm/rot. Radial feed rate stepless 0.2 – 200 mm/min. Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic operating cycle and minimal auxiliary times enabled by freely programmable SIEMENS programmable controller S5 for all machining steps, e.g. rapid traverse, feed, cutter on/off, for loading device, tailstock, possible shifting, etc. With piece counter, program numbering, and 30-position digital error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm in length x 8 mm Ø, with pneumatic double gripper for loading and unloading workpieces; raw parts are placed in exchange cassettes outside and then inserted into the loading unit. The double gripper places the parts between the workpiece spindle and tailstock; the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and also returned to the (finished parts) cassette by the gripper. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration and under power. Machine is set up for cutting worm shafts/armature shafts used in variable transmissions for automotive seat adjusters, window regulators, etc.

Būklė: naudotas, Gamybos metai: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. (not specified) Total power requirement 20 kW Machine weight approx. 6 t Space requirement approx. (not specified) CNC-controlled horizontal hobbing machine with workpiece portal loader, model A 35 / 36 CNC, year of manufacture 1992 Workpiece diameter / wheel diameter with automatic loading max. 150 mm Workpiece diameter with manual loading max. 200 mm Max. workpiece length approx. 400 mm Axial milling length (Z axis) 300 mm Module range for HSS/Carbide cutters 3 / 4.5 mm Number of teeth min./max. 2–999 Centre distance tool–workpiece min./max. 0–190 mm Workpiece rotation speed max. 0–350 rpm Milling slide swiveling left/right 50 / 60° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y axis) 100 mm Radial slide travel max. (X axis) 10–150 mm Tailstock travel max. (W axis) 420 mm Cutter speed stepless 0–1,500 rpm Feed range on all axes steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total power approx. 20 kW – 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special Equipment: Crjdpot Hwxbofx Akkjf MIKRON CNC control type 788 (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with conversational programming for creating various gearing cycles, such as helical gearing, worm and worm wheel gearing, crowned gears, with and without shifting, as well as further subprograms. Heavy duty shifting milling head with high cutter speeds and long shifting path, also for 2 cutters, with quick-change system and hydraulic counterbearing. Workpiece spindle head (C) with quick-change system (collet chuck) Heavy tailstock with 420 mm travel (W), in combination with an automatic workpiece loading device from GÜDEL Switzerland with a linear portal loader (approx. 1000 mm stroke (V)), swiveling double gripper with jaws for loading and unloading shaft-shaped workpieces (currently approx. 60 mm length x 25 mm Ø x module 1.5), however, without workpiece storage device. Separate coolant unit with magnetic chip conveyor Enclosed full machine guarding with sliding doors 2 machines with workpiece marking devices by BORRIES, unfortunately otherwise without accessories.

Būklė: geras (naudotas), Modulis – maks. 2 Frezavimo ilgis – 135 mm Bendroji galios sąnauda – 2,2 kW Mašinos svoris – apie 1420 kg Reikiamas plotas – apie 2,00 x 1,60 x 1,43 m --> Techniniai duomenys: didžiausias frezavimo skersmuo: Ø 150 mm Codpfszkvuvox Akkorf --> didžiausias frezavimo ilgis: 135 mm --> didžiausias modulis: 2 --> veleno skersmuo: Ø 24 mm --> veleno tvirtinimas: MK-4 --> frezos sukimosi greitis: 140–1120 aps./min. --> automatinis padavimas Įranga ir priedai: Aušinimo skysčio sistema, frezos, keičiami ratai, naudojimo instrukcija.

Būklė: naudotas, Gamybos metai: 1969, Wheel diameter - max. 160 mm Wheel width 355 mm Module - max. 4.5 Module - min. 0.5 Centre distance 450 mm Total power requirement 11 kW Machine weight approx. 3.8 t Space requirement approx. 2x1.7x1.6 m Wheel diameter - max. 160/175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centre distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece - max. 138 mm Centre distance between cutter and workpiece - min. 30 mm Milling head - swivelling 120° Cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Change gears - Milling arbors Credpfx Akevz Ec Iekef - Clamping devices - Documentation

Būklė: naudotas, Gamybos metai: 1988, x eiga 1800 mm y eiga 700 mm z eiga 1200 mm SK50 galva: taip Galvos: 2 Valdymas: Heidenhain 155 Stalas: 700–2000 mm Dokumentacija: taip Csdpfx Ajzf Nuxokksrf Išmontuota: taip Mašinos svoris apie 12,5 t 5 pakuotės

Būklė: naudotas, Technical details: X travel: 1000 mm Y travel: 350 mm Z travel: 400 mm Distance from column to table edge: min. 150 / max. 550 mm Spindle speed range: 28 - 1400 rpm / 18 steps Tool holder: SK40 Spindle head swivels left/right: 90° and forwards/backwards: 45° Feed rate (X/Y axis): 16 - 800 mm/min / 18 steps Table size: 1600 x 400 mm Clamping surface: 1400 x 330 mm Total power requirement: 14.5 kW Approx. weight: 4000 kg Machine dimensions (LxWxH): approx. 2.0 x 2.4 x 1.85 m Horizontal milling machine, retrofitted with vertical milling head Cjdpfx Aov Sz Diokksrf

Būklė: naudotas, Technical details: Cedpfxou Nc Nlo Akkorf X-axis travel: 450 mm Y-axis travel: 150 mm Z-axis travel: 400 mm Distance from column to table edge, min./max.: 100 / 250 mm Spindle speed range: 25, 44, 78, 130, 228, 400 / 6 steps rpm Feed rate X/Y: 10 - 100 / 8 steps mm/min Table size: 990 x 300 mm Clamping surface: 800 x 195 mm Table swivel +/-: 30° Connected load: not specified kW Weight approx.: 1,200 kg Machine dimensions (LxWxH): approx. 1.5 x 1.3 x 1.5 m Horizontal milling machine, currently fitted with a 32 mm tool arbor and a gear cutter. Machine vice included.

Būklė: naudotas, Gamybos metai: 2000, Ideal machine for the production of rolling pins, turned round chair legs, and similar items. Codpfx Aormxr Askkorf

Būklė: labai geros būklės (naudotas), Horizontali frezavimo staklė Veleno skersmuo: 40 mm Veleno ilgis: 220 mm Crodjw N Ryropfx Akkof Didžiausias veleno skersmuo: 250 mm

Būklė: labai geros būklės (naudotas), Ratų skersmuo - maks. 130 mm Ratų plotis 180 mm Modulis - maks. 2,5 Modulis - min. 0,3 Sukimosi greitis 140 – 900 aps./min Dantų skaičius - min. 4 Tvirtinimo ilgis maks. 200 mm Credpfx Akoy Umizeksf Valdymas Siemens Rušinio skersmuo - maks. 80 mm Bendra galingumo poreikis 3,5 kW Staklių svoris apie 2,9 t Užimamas plotas apie 1,8 x 1,6 x 1,9 m

Būklė: geras (naudotas), Machine number: 2082 Type / Model: F315 Control: conventional Travel paths x-y-z: 820 x 300 x 440 mm Table: 1250 x 335 mm Table clamping surface: 1100 x 225 mm Speed range: 56 to 2800 rpm Spindle taper: SK 40 Crjdpsh Rawfsfx Akkof Feed rate: 10 to 630 mm/min Rapid traverse: Connected load: 6 kW Accessories/Equipment: Condition: good Weight: 2 t Dimensions: 1700 x 2000 x 1900 mm

Būklė: geras (naudotas), Sandėlio numeris: 3099 Gamintojas: WMW Auerbach Pagaminimo metai: 1962 Mašinos numeris: 545 Tipas / Modelis: FW 160 Eigos: x-y-z: 425 - 140 - 315 mm Stalas: 630 x 160 mm Spaudimo paviršius: 530 x 120 mm Cedpoy R S U Usfx Akksrf Sukimosi dažnių diapazonas: 85 – 2 800 aps./min Griebtuvo tvirtinimas: SK 40 Pajudėjimai: 5 – 250 mm/min Greitas judėjimas: 2 500 mm/min Maitinimas: 2,3 kW Priedai/Įranga: Būklė: gera Svoris: 0,85 t Matmenys: 1 000 x 1 000 x 1 450 mm

Būklė: geras (naudotas), Ratų skersmuo - maks. 145 mm Credpjy Ivdhofx Akkof Ratų plotis 110 mm Modulis - maks. 2 Modulis - min. 0,3 Sūkių skaičius 112 - 1000 aps./min. Mažiausias dantų skaičius 6 Maksimali spaudimo ilgis 150 mm Bendras reikiamas galingumas 3,5 kW Staklių svoris apie 1,3 t Reikalinga vieta apie 1,3 x 0,8 x 1,4 m

Būklė: naudotas, Gamybos metai: 1969, Wheel diameter - max. 160,175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Crodpfx Aevzhf Sjkksf Centres distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece - max. 138 mm Centre distance between cutter and workpiece - min. 30 mm Milling head - swiveling 120° Cutter speeds 70 - 400 rpm Axial feed rates 0.25 - 4.0 mm/rev Radial feed rates 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Būklė: geras (naudotas), Horizontal milling attachment – Counterholder for KUNZMANN milling machines, WF series. This was an accessory for a KUNZMANN WF 4/3 TNC 124. There are 2 units available. Credpovr Stuofx Akksf The current list price at Kunzmann is over €2,000 plus VAT. With an appropriate adapter plate, it should also fit other machines (e.g. EMCO, MIKRON, DECKEL, FPS, etc.). Net price ex stock.