Mep Cobra 352 Nc 5.0 pirkti naudotą (5 394)

Būklė: naudotas, Gamybos metai: 2017, Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 mm Cutting capacity at 90 degrees: flat 180x70 mm Cutting capacity at 45 degrees left: round 110 mm Cutting capacity at 45 degrees left: square 95 mm Cutting capacity at 45 degrees left: flat 135x60 mm Cutting capacity at 45 degrees right: round 120 mm Cutting capacity at 45 degrees right: square 100 mm Cutting capacity at 45 degrees right: flat 135x60 mm Vice opening: 180 mm Saw blade dimensions: 350x32x3.4 mm Rotation speed: 1700/3400 rpm Machine weight: approx. 600 kg Automatic crosscut saw with semi-automatic function for cutting aluminium and light metal alloys. Mitre cuts from 45° right to 45° left and saw head swivels 0°–45° to the left. Control is via multi-microprocessor units, while two NC-controlled axes allow you to program up to 1,000 different cutting programs with varying quantities and lengths for identical material. - New centralized control console mounted on an articulated arm, allowing the machine to be operated easily from any working position and ensuring the emergency stop switch is always accessible. - Fieldbus communication system with dual microprocessor and serial interface. - Display with 20 characters x 4 lines to indicate the following technical parameters: number of programmed and executed cuts, saw blade thickness, feed length, cutting time, ammeter, and over 100 diagnostic messages and warnings. - New – Display and logging of alarm and error messages, with the option to view recorded events. New – 600 mm material feeder with cutting motor and ballscrew mounted on opposing ball bearings. - New – Low-voltage control panel: polyester membrane keyboard with thermoformed, raised keys and actuation indicator. - Saw bow stroke programmable directly from the control panel for adaptation to the cutting material. - Ball-bearing mounted turntable for easy and precise rotation. Ljdpjy Ruvbjfx Apnshn - Clamping system with two front-mounted vices which can be freely positioned along the longitudinal axis of the workpiece. - Adjustable mechanical stops for rapid positioning of the head at angle settings of 0 and 45 degrees left and right.

Būklė: naujas, Saw blade diameter: 350 mm Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120/110 mm Cutting capacity at 45 degrees: square 10/95 mm Cutting capacity at 45 degrees: flat 135 x 60 mm Motor: 2.5 kW Speed: 1700 / 3400 rpm Machine weight: approx. 600 kg Dimensions (L x W x H): 2.0 x 1.5 x 1.7 m COBRA 352 NC 5.0, automatic circular saw with semi-automatic function, designed for sawing aluminium and light metal alloys using carbide-tipped circular saw blades. Ledpfofg Rlgjx Apnshn The machine is capable of mitre cuts from 45° right to 45° left. By adjusting the vertical orientation, it is possible to perform cutting operations with the head inclined between 0° and 45° to the left. Numerically controlled circular saw equipped with a new Windows CE-based control unit, specifically developed by MEP for automatic machines.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2017, Used automatic circular saw for aluminium MEP Cobra 352 NC 5.0 Year of manufacture: 2017 Blade dimensions: 350x32x3.4 mm Lhsdpfxowu Tz Rj Apnjn Blade cutting speed: 1700/3400 rpm Mitre angle: from -45° to +45° Cutting capacity: at 0°: round: 120 mm, square: 105 mm, rectangle: 180x70 mm Touchscreen display Machine weight: 605 kg

Būklė: naujas, Saw blade diameter 350 x 32 mm Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 x 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120 / 110 mm Cutting capacity at 45 degrees: square 100 x 100 / 95 x 95 mm Cutting capacity at 45 degrees: flat 135 x 60 mm Speed 1700 / 3400 rpm Lhedpfsxaa Uxjx Apnsn Control MEP CNC Total connected load 2.6 / 3.5 kW Machine weight approx. 605 kg Dimensions (L x W x H) 2210 x 1680 x 2150 mm Equipment: - CNC fully automatic high-performance circular saw * for mitre cuts from 45° right to 45° left * for aluminium and light alloy materials - MEP microprocessor control * Windows 'CE' based system * user-friendly interface * storage for up to 100 cutting programs * user interface with 7” touch screen display & mechanical buttons * pivoting control panel * display and entry of alarm and error messages * positioning of the saw head and movement of the feeder via joystick * automatic detection of the cutting start position - material feed via stepper motor and precision ball screw * with 600 mm stroke * repeatable for cutting any length - manually operated safety hood - mechanical stops at -45°, 0°, +45° * facilitate quick positioning of the saw head - pneumatic vice system * 2x pneumatic front vices * including vertical vice - heavy-duty cast iron construction for vibration-free operation & maximum precision - saw head can also be tilted up to 45° - 2x sawing speeds - machine base with lockable door - coolant system (emulsion oil lubrication) - machine base with forklift pockets - comprehensive operator and maintenance manual, etc.

Būklė: naujas, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Lhedpfxjfg Rlce Apnon Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, suitable for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic cycle mode. CNC automatic machine with multiprocessor and two axes controlled by MEP control system of the latest generation, allowing the programming of up to 1000 different cutting programs on the same material thickness, each with different cutting lengths and quantities.

Būklė: geras (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 21064627/F, pjūklo disko skersmuo: 350 mm, pjūklo disko greitis: 3 500 aps./min, sukimosi greitis (min.): 1 700 aps./min, sukimosi greitis (maks.): 3 500 aps./min, MEP apskrito pjūklo staklės „Cobra 352 MA“ Lhsdpfx Aszm Threpnen

Būklė: naujas, Cutting diameter round: approx. 355 mm Cutting diameter square: 350 x 350 mm Saw blade length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Total connected load: 4.0 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, fully automatic hydraulic bandsaw machine in dual-column construction for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes: + Powered chip conveyor, installable on the right or left side of the machine. + Adjustable clamping pressure of the vices. + Feed conveyor with vertical rollers for lateral material support. Ljdpfx Apjfg E Hzenjhn + Numerically controlled bandsaw machine which can also be operated in semi-automatic mode, equipped with the new MEP 50 control system, specifically developed by MEP for automatic machines, based on Windows CE. + "Clean Cut" cycle: the feeder retracts the workpiece to prevent scoring on the cut surface when the band returns to the top at the end of the cut. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with 7" touch screen display and mechanical buttons for machine operations, ensuring reliable, simple, and intuitive operation as well as real-time monitoring of all cutting parameters.

Būklė: naujas, Gamybos metai: 2023, Pjovimo skersmuo 350 mm Juostos pjūklo ilgis 4640 x 34 x 1,1 mm Stalo aukštis 860 mm Pjovimo skersmuo 350 mm Pjovimo greitis 15–100 m/min Bendroji galia 4,0 kW Mašinos svoris apie 2800 kg Reikalingas plotas apie 2200 x 3200 x 2200 mm Eksponuota mašina dabartinė nauja kaina 55 910 eurų Pilnai automatinis juostinis pjūklas su dviejų kolonų sistema, skirta serijiniam pjovimui, ypač sunkių apdirbamų medžiagų ir vientisų medžiagų pjovimui. Šia mašina MEP siūlo jums mašiną, kuri techniškai yra aukščiausio lygio ir, naudojant aukštos kokybės medžiagas, pasižymi neprilygstama, tvirta ir atsparia konstrukcija. Ypač tvirtas pjūklo rėmas, pagamintas iš pilkojo ketens, užtikrina reikiamą stabilumą, dėl kurio gaunami įspūdingi pjovimo rezultatai, o tvirti pilkojo ketens kolonėlės, ant kurių pjūklo rėmas slenka per iš anksto įtemptas tiesines kreiptuves, net ir esant didžiausiai apkrovai, užtikrina didžiausią pjovimo tikslumą. Moderni mašinos valdymo sistema (MEP NC 5.0) suteikia operatoriui maksimalų patogumą ir užtikrina beproblemį veikimą. (Kontrolė / įvertinimas / korekcija realiuoju laiku) MAKSIMALUS PRODUKTYVUMAS > 2 veikimo režimai (pusiau automatinis ir automatinis) leidžia efektyviai pjauti esant bet kokioms sąlygoms. > Valdymo sistema leidžia išsaugoti iki 100 pjovimo programų, kurių kiekvienoje yra skirtingi kiekiai ir ilgiai, taip sumažinant programavimo laiką, kai atliekami dažnai pasikartojantys užsakymai. > Automatiškai nustatoma pradinė pjūklo galvutės padėtis, todėl sumažinamas nustatymo laikas. > Pjūklo galvutės poslinkis per tiesines kreiptuves, kurias varo hidrauliniai cilindrai su iš anksto įtemptais rutuliniais guoliais, užtikrina mechaninių vibracijų sumažinimą pjovimo metu ir didesnį stabilumą. > Automatinis priekinio pjūklo ašmenų kreiptuvės galvutės padėties reguliavimas pagal pjaunamo strypo matmenis sumažina apdorojimo laiką. > Pjūklo ašmenų įtempimas atliekamas bešepiu varikliu, nuolat kontroliuojamas ir automatiškai reguliuojamas iki nustatyto minimalaus lygio. YPAČ LANKSTUS > Poslinkio sistema su 600 mm eiga yra pakartojama ir leidžia pjauti bet kokio ilgio. > Vertikalus volelių pora leidžia laikyti ir išlyginti bet kokio tipo strypus ar pluoštus, kurie tiekiami. > Vektorinis keitiklis, skirtas bepakopiniam ašmenų greičio reguliavimui nuo 15 iki 100 m/min, leidžia pjauti bet kokias medžiagas. > Motorizuotas drožlių transportavimo įrenginys gali būti montuojamas dešinėje arba kairėje pjovimo zonos pusėje. SAVYBĖS: Pilnai automatinė valdymo sistema – NC 5.0 -Naujoviška (pagrįsta Windows CE) valdymo sistema su lietimui jautriu ekranu ir papildomais „soft-touch“ klavišais, skirtomis dažnai naudojamoms operacijoms. -USB prievadas -„Joy-stick“ rankinis ašių (X-Y) valdymas -Kontroliuojamas galvutės nusileidimas su automatine kompensacija per servoventilį, sumontuotą cilindre, nuolatinis pasirinkto sukimo momento stebėjimas ir tikslus poslinkio reguliavimas milimetrais per minutę. -Bespakopinio juostos greičio reguliavimas m/min. -Pjūklo juostos įtempimas su juostos įtempimo kontrole ir indikacija ekrane elektroniniu keitikliu -Automatinis pjūvio pradžios atpažinimas -Didelis spalvotas lietimui jautrus ekranas 7", skirtas visoms mašinos funkcijoms ir parametrams rodyti ir pasirinkti bei programoms kurti per kelias sekundes... Lsdpfx Apjlf Tu Uenjhn

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2020, Naudota automatinė juostinė pjovimo staklė MEP Shark 350 NC HS 5.0 Juostos matmenys: 4640x34x1,1 mm Juostos greitis: nuo 15 iki 115 m/min (inverteris) Automatinis juostos įtempiklis: 1600 kg Automatinis drožlių transporteris Reguliuojamas spaustuvų slėgis Pjovimo galia: apvali 350 mm, kvadratinė 350x350 mm Lodpfxjwwr Tqs Apnjhn Pagaminimo metai: 2020 Staklių matmenys: 3045x2025x(aukštis)2225 mm Svoris: 2800 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, MEP Cobra 352 MA šaltasis apskritas pjūklas labai geros būklės. Pagaminimo metai: 2014. Galimas pristatymas. Lodpjyzbmnsfx Apnshn

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2015, Naudotas automatinis hidraulinis juostinis metalo pjūklas MEP Shark 230 nc hs 5.0 Lodpfotva Nhex Apnehn Automatinis drožlių sraigtinis pašalintuvas Pjūklo juostos dydis: 2950x27x0,9 Pjovimo greičio pasirinkimas su inverteriu: nuo 15 iki 100 m/min Darbiniai pajėgumai: apvalus 230 mm, kvadratinis 230x230 mm Metai: 2015 Galimybė pjauti ir pusiau automatiniu režimu Staklės pilnai aptarnautos, pakeistos šios dalys: visi guoliai, reduktoriai, abu ratai (skriemuliai), juosta, kietmetalio plokštelės kreiptuvuose, pagrindinis velenas, aušinimo skysčio siurblys, dvi žnyplės, aušinimo vamzdeliai, valdymo svirtis, ventiliatoriai ir kiti eksploataciniai elementai.

Būklė: geras (naudotas), Gamybos metai: 2014, Cutting range 300 mm Cutting range at 90 degrees: flat 330 x 260 mm Cutting range at 90 degrees: square 260 x 260 mm Cutting range at 45 degrees: round 260 mm Cutting range at 45 degrees: flat 270 x 200 mm Cutting range at 45 degrees: square 250 mm Cutting range at 60 degrees: round 180 mm Cutting range at 60 degrees: flat 170 x 170 mm Cutting range at 60 degrees: square 180 mm Automatic feed 9,999.9 mm Minimum feed 2.0 mm Minimum cutting diameter 5.0 mm Band speed 15 – 100 m/min Vice, opening 340 mm Saw blade dimensions 3650 x 27 x 0.9 mm Control MEP CNC Total power requirement 2.2 kW Weight 1240 kg Dimensions (L x W x H) 1800 x 1900 x 1750 mm Current list price approx. €23,000 Special price on request Equipment: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL) - With additional semi-automatic function, for cuts from 0° to 60° to the left - WINDOWS “CE” based MEP 50 control and 7” touch-screen display * Simple and fast setup of all machine parameters * With additional soft keys and backlit display * 10 programs, each with a maximum of 9,999 pieces and max. 9,999.9 mm in length - Material feed with stepper motor via ball screw spindle * Single stroke 600 mm repeatable for cutting any length * Accuracy of ±0.1/600 mm - Feeder with guard cover and safety limit switch - Precise adjustment of feed rate displayed in mm/min - Positioning of saw head and movement of feeder via joystick - Automatic detection of cutting start - Large, adjustable cast steel band pulleys - Blade tensioning with tension monitoring and display readout Ledpfxezkbn Ue Apnohn - Carbide blade guides for maximum cutting precision - Automatic monitoring of cutting load - Quick-adjust vice * With interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant tank * Equipped with 2 electric pumps for saw blade lubrication and cooling * Coolant gun for cleaning the machine - Chip removal brush for cleaning the blade - Operating manual in German Manufacturer information: When installing this saw into a mains system with a residual current circuit breaker (RCCB), this must be all-current sensitive and not less than 300 mA.

Būklė: naujas, Cutting diameter round: 230 mm Cutting diameter square: 230 x 230 mm Saw band length: 2950 x 27 x 0.9 mm Band speed: 15 – 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Ljdpfefg E Hyex Apnjhn SHARK 230-1 NC HS 5.0, electrohydraulic double-column fully automatic band saw with semi-automatic function for 0° cuts in structural steel, stainless steel, alloyed steels, solid and profile material, with a maximum remnant length of 60 mm. - Maximum cross-section: 230 x 230 mm. - Numerically controlled band saw machine with the new Windows “CE” based platform, specially developed by MEP for automatic operation. FEATURES: - User interface with 7” touchscreen display and mechanical keys for machine operation functions, ensuring reliable, simple, and intuitive operation as well as real-time control of all cutting parameters. - Safety enclosure complies with the latest safety regulations in accordance with Machinery Directive EN 13898/2007. - New fieldbus communication system with dual microprocessor and serial connection. - Sturdy cast iron (G25) frame to compensate for vibrations, improve machine stability, and protect the saw blade.

Būklė: naudotas, Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 352 NC EVO, Circular saw automaton with semi-automatic operation, designed for cutting aluminium and light metal alloys, suitable for use with carbide-tipped circular saw blades. Includes extraction unit and material handling (roller conveyors). Machine capable of mitre cuts from 45° right to 45° left. Thanks to the vertical axis orientation, it is possible to perform saw operations with the head tilted between 0° and 45° to the left. Lhodpfx Aev T U Tgopnjn

Būklė: naudotas, Gamybos metai: 2020, Pjūklo disko matmenys: 350x32x4 mm Spaustuvai: 180 mm 2 greičiai: 1700/3400 aps./min Pjovimo sritis prie 90°: apvalus 120 mm Pjovimo sritis prie 90°: kvadratinis 105 mm Pjovimo sritis prie 90°: plokščias 180x70 mm Pjovimo sritis prie 45°: apvalus 120/110 mm Pjovimo sritis prie 45°: kvadratinis 100/95 mm Pjovimo sritis prie 45°: plokščias 135x60 mm Galia: 2,2 kW Svoris: 225 kg Lhsdjyvvnpopfx Apnjn Modelyje COBRA 352 MA (su automatiniu spaustuvu), kuris visiškai su stovu komplektuojamas, spaustuvai automatiškai užsidaro nuleidžiant pjovimo galvą.

Būklė: naujas, Cutting range at 90°: round 350 mm Cutting range at 90°: square 350 mm Lhsdpfx Apoyv Nd Renjn Saw blade dimensions: 4640x34x1.1 mm Vise opening: 355 mm Saw blade speed: 15–115 m/min Machine weight: approx. 2,800 kg Space requirement: approx. 3050x2190x2200 mm Shark 350 NC HS 5.0 – automatic hydraulic band saw machine in a double-column design for 0° cuts on solid materials and profiles of steel, stainless steel, and steel alloys up to max. 350x350 mm. Standard equipment includes: + Powered chip conveyor, installable on either the right or left side of the machine. + Adjustable clamping pressure for the vices. + Feed unit with vertical rollers for lateral material support. - Numerically controlled band saw machine, also operable in semi-automatic mode, equipped with the new MEP 50 control unit (Windows CE-based, developed by MEP for automatic machines). - "Clean cut" cycle: The feeder pushes the workpiece backwards to avoid scoring on the cut surface when the blade returns at the end of the cut. - Fieldbus communication system with dual microprocessor and serial connection. - User interface with 7" touchscreen display and mechanical buttons for band saw operating functions, ensuring reliable, simple, and intuitive operation as well as real-time monitoring of all cutting parameters. - Automatic determination of the starting cutting position. - CNC machine for storing up to 100 cutting programs with different quantities and cut lengths. It is also possible to select up to 100 programs as a sequence. - Sturdy cast iron construction to absorb vibrations, ensuring stable cutting precision and long saw blade life. - Hydraulic feed of the saw frame via linear guides with preloaded ball bearing rails. - Hydraulic control unit for opening/closing the feed and front vices. - Continuously variable saw blade speed from 15 to 110 m/min via vector inverter. - Material feed via stepper motor and recirculating ball screw mounted on opposing bearings with a 600 mm stroke, repeatable for cutting any length. - Maximum remnant length 120 mm + cut length (OPTIONAL: special feeder jaws to minimize remnant to 25 mm + cut length). - Cut monitoring system (OPTIONAL). - Material feeder with self-aligning feeder vice for feeding slightly bent material. - Saw blade drive wheel secured by a conical clamping ring for optimal fastening and simultaneous axial adjustment. - Management software for real-time control/evaluation/correction of: - Cutting force - Cutting torque and saw blade tension compared to programmed values. - Adjustable saw blade guide heads made of steel with combined roller and hard metal guides, including control valves for traditional circulation lubrication. - Prepared for installation of OPTIONAL minimal quantity lubrication system. - Adjustment of the saw blade drive wheel for blade change directly from the operator console. - Automatic adjustment of the front saw blade guide head to match material size. - Machines...

Būklė: naujas, Cutting diameter: 300 mm Saw band length: 3320 x 27 x 0.9 mm Cutting width: 300 mm Control: NC Cutting capacity at 90° – flat: 330 x 260 mm Cutting capacity at 90° – square: 260 x 260 mm Cutting capacity at 45° – square: 250 mm Cutting capacity at 45° – flat: 270 x 200 mm Cutting capacity at 60° – round: 180 mm Cutting capacity at 60° – square: 170 mm Band speed: 15 – 100 m/min Lodpjfg E H Eefx Apnjhn Total power requirement: 2.2 kW Machine weight approx. 1.1 t Space requirement approx. 3.3 x 2.83 x 2.23 m Equipment/features: - Electrohydraulic fully automatic band saw with additional semi-automatic, semi-automatic dynamic, and manual operation modes - Automatic cycle (cuts from 0° to 60° to the left) - Semi-automatic, semi-automatic dynamic, and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle allows cuts outside of series production to be made directly without programming - Numerically controlled band saw with new, specially developed Windows CE-based control system from MEP for automatic machines - User interface with 7" touchscreen display and mechanical buttons for machine operation functions - Infinitely variable cutting speed adjustment from 15 to 100 m/min via frequency inverter (VFD) - Material feed with stepper motor via ball screw spindle – mounted on opposing ball bearings; single stroke 600 mm - Repeatable strokes for cutting any length - Automatic monitoring of cutting force via a servo valve mounted directly on the cylinder - Coolant tray integrated in the machine base - Swarf removal brush - Bimetal band saw blade for solid and profile material - Tool kit and user manual with spare parts list

Būklė: naudotas, Saw blade diameter: 350 mm Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120 mm Cutting capacity at 45 degrees: square 100 mm Cutting capacity at 45 degrees: rectangular 135 x 60 mm Saw blade speeds: 1,700 / 3,400 rpm Total power requirement: 1.5 / 2.2 kW Machine weight approx. 0.210 t Dimensions (L x W x H): 0.9 x 1.4 x 1.4 m Manual circular saw for cutting aluminium with mitre cuts from 45° right to 45° left and saw head tiltable from 0° to 45° to the left. On the Cobra 352 MA (automatic vice), the vices close automatically when the saw head is lowered. • Roller-bearing rotary table for fast and precise mitre adjustment • Screw locking device to secure the saw head at any angle • Automatic saw blade lubrication • Clamping system consisting of two vices • Saw head lock in the upper position • Adjustable length stop for repeat cuts of the same length • Vice opening: 180 mm Lsdpfx Apofc T Ufjnohn

Būklė: naudotas, Saw blade diameter: 350 mm Cutting range at 90° (round): 120 mm Lhjdpfsfc T Ugjx Apnjn Cutting range at 90° (square): 105 mm Cutting range at 90° (flat): 180 x 70 mm Cutting range at 45° (round): 120 mm Cutting range at 45° (square): 100 mm Cutting range at 45° (rectangular): 135 x 60 mm Saw blade speeds: 1700 / 3400 rpm Total power requirement: 1.5/2.2 kW Machine weight approx. 0.285 t Dimensions (L x W x H): 1.2 x 1.4 x 1.4 m Semi-automatic circular saw for cutting solid and hollow aluminium materials as well as light metal alloys, equipped with an electro-welded carbide-tipped blade. The machine enables mitre cuts from 45° right to 45° left. The vertical alignment allows sawing operations with the head tilted from 0° up to 45° to the left.

Būklė: naujas, Pjūklo disko matmenys: 350x32x4 mm Spaustuvai: 180 mm 2 greičiai: 1700/3400 aps/min Pjovimo sritis 90°: apvalus 120 mm Pjovimo sritis 90°: kvadratinis 105 mm Ledsy Dh Nnjpfx Apnshn Pjovimo sritis 90°: plokščias 180x70 mm Pjovimo sritis 45°: apvalus 120/110 mm Pjovimo sritis 45°: kvadratinis 100/95 mm Pjovimo sritis 45°: plokščias 135x60 mm Galia: 2,2 kW Svoris: 225 kg COBRA 352 MA modelyje (automatinės spaustuvės), visiškai su pagrindu, spaustuvai automatiškai užsidaro nuleidus pjūklo galvą.

Būklė: naujas, Diskinio pjūklo matmenys: 350 x 32 x 3,4 mm Lhedpfx Asyv Nqqepnsn 2 greičiai: 1700/3400 aps./min Pjovimo sritis 90° kampu: apvalus 120 mm Pjovimo sritis 90° kampu: kvadratinis 105 mm Pjovimo sritis 90° kampu: plokščias 180x70 mm Pjovimo sritis 45° kampu: apvalus 120/110 mm Pjovimo sritis 45° kampu: kvadratinis 100/95 mm Pjovimo sritis 45° kampu: plokščias 135x60 mm Galia: 1,5/2,2 kW Svoris: 280 kg

Būklė: naujas, Model designation Ledpfx Ael Sva Iepnohn SHARK 331-1 NC 5.0 SPIDER

Būklė: naujas, Cutting range 300 mm Cutting range at 90 degrees: flat 330 x 260 mm Cutting range at 90 degrees: square 260 x 260 mm Cutting range at 45 degrees: round 260 mm Cutting range at 45 degrees: flat 270 x 200 mm Cutting range at 45 degrees: square 250 mm Cutting range at 60 degrees: round 180 mm Cutting range at 60 degrees: flat 170 x 170 mm Cutting range at 60 degrees: square 180 mm Automatic feed 9999.9 mm Minimum feed 2 mm Minimum cutting diameter 5 mm Band speed 15 - 100 m/min Vice opening 340 mm Saw blade dimensions 3650 x 27 x 0.9 mm Total power requirement 2.2 kW Weight 1240 kg Dimensions (L x W x H) 1800 x 1900 x 1750 mm Equipment: - Heavy-duty electro-hydraulic fully automatic band saw (INDUSTRIAL) - with additional semi-automatic function for cuts from 0° to 60° to the left - WINDOWS 'CE'-based MEP 50 control system and 7” touch screen display * Simple and fast adjustment of all machine parameters * Additional soft keys + backlit display * 10 programs, each with max. 9999 pieces and max. 9999.9 mm length - Material feed with stepper motor via ball screw spindle * Single stroke of 600 mm, repeatable for any length * Accuracy of ± 0.1/600 mm - Feeder with protective cover and safety limit switch - Precise feed rate adjustment, display in mm/min - Saw head positioning and feeder movement by joystick - Automatic detection of cut start Lodpfxoxabwhe Apnehn - Large-sized, adjustable cast steel band wheels - Saw band tension with tension control and display on screen - Carbide blade guides for highest cutting precision - Automatic monitoring of cutting load - Quick-clamping vice * With interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant tank * Equipped with 2 electric pumps for band lubrication and cooling * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw band - Operator's manual in German Manufacturer's note: When installing this saw in a network with Residual Current Device (RCD), ensure the device is all-current sensitive and rated not below 300 mA. SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut Micro-dosing unit

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Nėra minimalios kainos – garantuotas pardavimas už aukščiausią pasiūlymą! Pakrovimas: nuo 2023-12-01 iki 2023-12-10. TECHNINĖS CHARAKTERISTIKOS Bendrieji duomenys Gamintojas: MEP Modelis: Cobra 350 CNC FE Mašinos numeris: Pagaminimo metai: 1996 Mašinos tipas: metalo diskinis pjūklas Pjovimo įrenginys Pjovimo disko skersmuo: 350 mm Ljdpfx Apj Ad Irwenehn MAŠINOS CHARAKTERISTIKOS Matmenys Ilgis: 2000 mm Plotis: 1000 mm Aukštis: 1800 mm Svoris Mašinos svoris: 500 kg

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Peilio pasvirimas: -45° / +45°. Maksimalus spaustuvo atidarymas: 180 mm Ljdpfxjx Hw Sqs Apnshn Nebegalima tiekti ilgis: 385 mm Disko dydis: 350 mm Peilio sukimosi greitis: 1700 / 3400 aps./min. - 2 greičiai