Mütek Granuliatorius, Plastikų Granuliatorius pirkti naudotą (3 228)

Gamybos metai: 2025, būklė: naujas, Granulator MVZ 7.5 kW Demonstration unit available at a special price Our MVZ 7.5 granulator is suitable for shredding thin-walled plastic parts or for secondary shredding of wood chips. Further details available after a test run with your material. Our granulators are used for size reduction of various materials, such as plastics or wood. Shredders and granulators are suitable for a wide range of size reduction tasks. For example, during injection moulding, reject parts and sprues are produced which need to be reprocessed. In blow moulding operations, there are not only reject parts but also trim scrap or start-up parisons. Materials that can be processed include blow moulded products such as PET bottles, PE/PP bottles, canisters, or buckets and pipes. The material is fed from above into the grinding chamber of the granulator via a hopper. The rotor inside is equipped with cutting knives. Material is cut between the rotating blades and the stationary blades housed in the grinding chamber until, once it reaches the defined granulate size, it falls through the screen located under the rotor. *Option: The ground material can then be pneumatically conveyed into big bags, silos or other containers. The price applies only to the granulator system as shown in picture 1 - Fan, cyclone and filter are optional. --- Technical data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger units available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *highly dependent on screen and material Application example: Shredding PE 1000 plastic Feed size: approx. 40 mm chip length Secondary shredding to approx. 6 mm Throughput up to 50 kg/h with a 6 mm screen (Throughput up to 80 kg/h with an 8 mm screen) Significantly higher throughputs can be achieved when post-shredding G 30 wood chips. Up to a maximum of 400 kg/h with a 10 mm screen. *If metered, e.g. via conveyor belt or auger. Details after test run with approx. 30 kg. Rotor diameter: 180 mm 6 rotor knives, 225 mm each 4 stator knives, 225 mm each Dimensions: 930x730x1420 mm Weight: 450 kg, Suction connection: 100 mm, Screens: 6, 8 and 15 mm – further screens available, Price per screen: €390 Price for spare knife set: €679 Suitable, for example, for: - All types of plastic waste Various materials – HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs etc. Bodod N Dn Djpfx Af Ajdb Items from injection moulding, blow moulding, injection moulding scrap, small bottles, cables, small pipes, profiles, etc. --- Larger units are also available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *dependent on screen and material Opening: 620x400 mm *optionally with matching extraction/transport system Granulator MVZ / 30 kW Throughput up to 400 kg/h *dependent on screen and material Opening: 620x500 mm *optionally with matching extraction/transport system --- For configuring the machine, the following information is important: - Length x width x height of the input material? - Screen size: what final particle size (mm) do you require? - Required hourly throughput in kg? - Wall thickness in mm? - Material description Photos can also be helpful.

Gamybos metai: 2023, veikimo valandos: 5 h, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, pjovimo ilgis (maks.): 105 mm, peilių skaičius: 12, rotoriaus skersmuo: 300 mm, mašinos/transporto priemonės numeris: 20711, GETECHA Granuliatorius / Smulkintuvas prie presavimo (Versija A 2.2.2) Paskirtis: Profesionalus smulkintuvas, skirtas darbui šalia presų arba kaip mažo našumo centrinis granuliatorius, idealiai tinkantis liukų ir vidutinio dydžio plastikinių detalių perdirbimui. Įrenginys montuojamas ant pakeltos rėmo konstrukcijos, todėl smulkmė lengvai nukreipiama tiesiai į maišus arba konteinerius. Techninės specifikacijos: Pjovimo sistema: - Rotoriaus skersmuo: 300 mm - Pjovimo ilgis: 105 mm - Rotoriaus peilių skaičius: 10 (HSS, grūdintas greitaeidis plienas) - Statoriaus (fiksuotų) peilių skaičius: 2 - Pjovimo tipas: Žirklių tipo geometrija (mažina dulkėtumą, triukšmą bei energijos sąnaudas) - Rotacijos greitis: apie 230 aps./min. Našumas: - Pralaidumas: apie 80 kg/val. (priklausomai nuo medžiagos ir sieto dydžio) - Sietas: 6 mm (apvalios skylės) Bdjdpfx Aoyv A A Tsf Aeb Pavara ir galia: - Variklio galia: 5,5 kW - Maitinimas: 3 x 400 V + N, 50 Hz Matmenys ir svoris: - Kameros įvado angos matmenys: 450 x 335 mm - Svoris: apie 420 kg - Dažymas: RAL 7035 (Pilka) / RAL 5015 (Mėlyna) Konfigūracijos ypatybės (Versija A 2.2.2): - Aukštai pastatomas rėmas: Pakelta konstrukcija patogiam ir ergonomiškam granuliato išleidimui. - Rankinio padavimo bunkeris: Garso izoliacija, didelė įvado anga (450 x 360 mm). - Išleidimo sistema: Gravitacinis išleidimas, pritaikytas maišams arba surinkimo dėžėms. Pagrindiniai privalumai: - Aukšta pjovimo kokybė: 10 peilių žirklių tipo rotorius užtikrina aukštos kokybės smulkintą produkciją minimaliam smulkių dalelių kiekiui. - Paprasta priežiūra: Greita prieiga prie sieto bei greitas peilių reguliavimas, puikiai tinka dažnai keičiant žaliavą ar spalvą. - Atsparumas dėvėjimuisi: Galimas pasirinkimas su dėvėjimui atsparia danga, skirtas stiklo pluoštu (GF) armuotų medžiagų smulkinimui.

Gamybos metai: 2023, veikimo valandos: 5 h, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, pjovimo ilgis (maks.): 75 mm, peilių skaičius: 8, rotoriaus skersmuo: 180 mm, mašinos/transporto priemonės numeris: 20710, GETECHA Przekładniowy młyn granulacyjny przy maszynie / Rozdrabniacz do tworzyw sztucznych Model: Seria A 5.10.1 (Kompaktowy granulátor) Zastosowanie: Bezpośredni recykling wlewków i części odrzuconych, zaprojektowany do pracy przy wtryskarce lub do mniejszych, centralnych zadań mielenia. Specyfikacja techniczna: Wysokowydajny granulátor niemieckiej produkcji, charakteryzujący się solidną konstrukcją i precyzyjną geometrią cięcia. Zaprojektowany do cichego oraz niskopyłowego przetwarzania tworzyw. System tnący: - Średnica wirnika: 180 mm - Długość cięcia (długość noża): 75 mm - Liczba noży wirnika: 7 (jakość HSS) - Liczba noży statora (nieruchomych): 1 - Prędkość obrotowa wirnika: 270 obr./min (optymalizowana pod kątem jakości materiału i redukcji hałasu) Wydajność & Sito: - Maksymalna wydajność: do 35 kg/h (w zależności od rodzaju materiału i wielkości sita) - Sito: 6 mm standard (perforacja okrągła) Napęd & Moc: - Moc silnika: 2,2 kW - Zasilanie: 3 x 400V +N, 50Hz Wymiary wlotów: - Wlot komory tnącej: 285 x 200 mm - Ręczny wlot zasypowy: 337 x 310 mm Konfiguracja & Wyposażenie (Wersja A 5.10.1): Bdedpfx Afeyv Avgj Ajb - Lej zasypowy: Specjalnie wyciszony, dostosowany do ręcznego podawania. - Mobilność: Urządzenie mobilne na czterech kółkach (dwa z hamulcami postojowymi). - Odbiór materiału: 5-litrowy pojemnik na przemiał z bocznym króćcem ssącym (ø 38 mm) do bezpośredniego podłączenia przenośnika podciśnieniowego. - Wykończenie: Oryginalna przemysłowa powłoka GETECHA w kolorze RAL 7035 / RAL 7011. Główne zalety: - Wszechstronność: Nadaje się jako dedykowany młyn przy maszynie lub mały centralny do części technicznych. - Trwałość: Noże wirnika HSS zapewniają długą żywotność; opcjonalnie dostępna wersja wzmocniona do tworzyw zbrojonych włóknem szklanym (GF). - Przyjazny w obsłudze: Wyjątkowo łatwy dostęp do szybkiego czyszczenia, wymiany sita i ustawiania noży, minimalizując przestoje przy zmianie materiału/koloru.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Granuliatorius / Peilių malūnas INAN TECH Modelis: IM38/100 Rotoriaus ilgis: 1000 mm Rotoriaus skersmuo: 380 mm Pagrindinis variklis: 18,5 kW Automatinis atliekų padavimas Bdjdpfjxgfwxsx Af Ajb

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Granuliatorius / Peilių malūnas INAN TECH Modelis: IM38/100 Rotoriaus ilgis: 1000 mm Rotoriaus skersmuo: 380 mm Pagrindinis variklis: 18,5 kW Bdsdpfx Asxgfrief Aeb Automatinis atliekų padavimas

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Bendra aprašymas: Specialiai sukurta minkštų ir vidutinio kietumo plastikų malimui. Pastovus išleidimo vamzdis ant smulkinimo talpos. Išleidimo vamzdis su reguliuojama oro srauto funkcija ir įstrižiniu nupjovimu. Automatinė savireguliuojanti diržinė pavara (nereikalaujanti priežiūros). Techninės specifikacijos: Garso izoliacija nerūdijančio plieno bunkeryje. Bunkeris paruoštas magneto įrengimui. Smulkinimo kamera: 247 x 284 mm. Peilių skaičius: 3 besisukantys – 2 fiksuoti. Rotoriaus skersmuo: 180 mm. Rotoriaus konstrukcija: Atvira. Rotoriaus greitis: 200 aps./min. / 50 Hz. Galandami peiliai. Sieto skylių diametras: 5 mm. Variklis: 3 kW. Didelis smagratis suteikia papildomos pjovimo inercijos storasienėms detalėms. Našumas: 35 kg/h (priklausomai nuo medžiagos, detalių geometrijos, smulkintuvo dydžio ir pan.). Nerūdijančio plieno rinkimo talpa (13 litrų), tinkama rankiniam arba vakuuminiam išleidimui. Bsdpfx Afoxgn Uge Aedb Pastabos: Sandėlyje – smulkintuvai su papildomomis opcijomis: - su magnetu ant bunkerio - su antistatiniu talpiniu jutikliu - su išleidimo vamzdžiu

Gamybos metai: 2023, būklė: naujas, Josan PVC Mill 500 We also offer leasing and financing options. Feel free to ask us! ‼️Net price only €18,999‼️ With our complete system, as shown in the picture, you can finely mill your plastic materials and feed them directly into the recycling process. Of course, we also have pre-shredders, crushers, and a full range of other plastic recycling machines. Whether you are a large enterprise, SME, or small business, our expertise enables us to meet your specific recycling needs with our machinery! We keep demonstration machines in stock at our location in Heilbronn for on-site viewing! From copper granulation systems, shredders, electrostatic separators (you can, for example, separate sand from plastic, copper from plastic, various types of plastics, etc., and thus immediately reuse the purified material). Simply ask us. We produce systems tailored to your needs. We must note that our English is not perfect. You are also welcome to communicate with us in Swabian dialect! Josan PVC Mill 500: ▶️ Throughput approx. 200 kg/h ▶️ Power 37 kW Bedpfoqvmn Nsx Af Ajdb ▶️ 24 rotating and 13 fixed blades made from extra-tough special steel alloy ▶️ Complete as shown in the picture, all-inclusive ▶️ Weight approx. 1,200 kg Net price €18,999.00 +19% VAT €3,609.81 Gross price €22,608.81 Errors excepted. Pictures/descriptions may vary.

Būklė: naujas, Gamybos metai: 2026, * Optional features available at extra cost; see below * Approximate production time: +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, ensuring consistent briquette quality in continuous operation. The compaction process operates without the addition of binding agents—only hydraulic pressing force is applied. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation beneath existing extraction and filtration systems, as part of a complete disposal unit, are also available. Depending on customer requirements, individual MPP NEM machines can be combined into a system. The chip container of the press can be loaded manually, via conveyor belt, by means of an extractor or using a tilting container trolley. For systems requiring fully automatic operation, the use of a lifting and tipping device in combination with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 80 mm, and the diameter is 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a catch pan. In this way, coolants, cutting fluids, and lubricants can be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage bin of the briquetting press. An agitator installed at the bottom of the bin prevents bridging and feeds the material into the pre-compaction chamber. In this chamber, a hydraulic slide compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slide until the set pressing pressure is reached. Afterwards, the vertical cylinder moves up and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the length of the produced briquettes. Advantages of the briquetting process: • Reduction of volume by up to 90% • Emulsion recovery • Cost savings in storage and transport • Efficient disposal • Profitable resale Briquetting Press NEM 900: For briquetting aluminium chips Throughput: up to 350 kg/h maximum (material-dependent; chip length less than 10 mm) During the last test with aluminium chips less than 18 mm – approx. 260 kg/h *Further details available after a free test with your material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical Data: Total power requirement: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Bedpfxjgfm Rye Af Aodb Silo: 1 m³ Silo diameter: 1200 mm Includes agitator Oil tank: 600 litres Dimensions: 2500 x 1700 x 1730 mm (LxWxH) Weight: 2250 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Būklė: naujas, Gamybos metai: 2026, Our best-selling briquetting press – the classic. + Proven and simple technology for extremely high reliability + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras at additional cost: * Surcharge for level sensor enabling automatic operation + €995 net * Surcharge for large pre-compression chamber + €970 (recommended for very light material such as straw; machine will be 13 cm wider) Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Opt. briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Bsdpfx Afogl Nlmj Asdb Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Press jaws cooling option: no Hydraulic oil cooling option: yes Filling level monitoring option: yes CE compliant Requirements for raw material: - The moisture content (a.d.) must be at least 6% up to a maximum of 18% - Maximum chip length is 15 mm - Installation temperature: heated room with at least +5°C - Customer must ensure hydraulic oil retention - Feedstock must be free from metals and mineral contaminations such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Būklė: naujas, Gamybos metai: 2026, Availability upon arrangement Very robust machine with high pressing force - Also suitable for producing saleable briquette quality *depending on material. The large-dimensioned pressing cylinder and 70 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for demonstration cooling unit + €4,980 net, Bdjdpfx Asd Nm Sief Aob (can also be retrofitted later) * Cools the press clamp (important for operation over 4 hours) and the hydraulic oil * Cooling unit recommended for continuous operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optimal briquette stroke: 80 mm, Performance (material dependent): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, 400 Volt / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Option to cool press clamp: yes, with special accessory - cooled press clamp Option to cool hydraulic oil: yes Cooling of the press clamp and hydraulic oil with cooling unit (optional accessory) Option for fill level monitoring: yes Option for continuous briquette (log formation): yes (material dependent) Option for enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for raw material: - The moisture content (absolutely dry) must be between at least 6% and a maximum of 18% - Maximum chip length 20 mm - Installation temperature: climate-controlled room at minimum +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Būklė: naujas, Gamybos metai: 2026, Production time approx. +/- 4 months The optimal machine for shredding, e.g., pallets and wood residues. * Prepared for extraction, see pictures 4 and 5 without additional accessories such as display hopper or conveyor belt cut-out Commodity code: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph with turbo coupling included Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knives: 76 pieces, reversible multiple times Knife dimensions: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 m³ Hydraulically operated pusher Bdjdpfxod Hkqhs Af Aob Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (LxWxH) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard features include: - V-rotor for maximum throughput - 2nd knife row on rotor - Control cabinet with Siemens PLC control - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when the rotor is idle - Speed 70–90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard and MDF panels, and other materials subject to testing and approval by the manufacturer. Raw material requirements: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Special price for our demonstration machine One machine remaining, immediately available (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood as well as pallet offcuts. Pallets must be prepared using a jigsaw or chainsaw so that they will fit upright into the hopper—see image 2. Ideally, the pieces should be around 40x20x20 cm so that the wood can lie flat on the slider floor. This enables the machine to operate at maximum efficiency. A hydraulically operated pusher moves along the bottom of the shredder and automatically pushes the wood against the rotor depending on load. Material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on screen size and how well the material is prepared. *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent pusher control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, reversible multiple times Option: double blade row + €995 net Rotor diameter: 260 mm Control unit: Siemens S7-1200 PLC Bedpfx Asdwktkef Aodb Cutting unit opening: 630 x 820 mm Fill volume approx. 0.6 cubic meters Hydraulically operated pusher Screen perforation as required (10 - 30 mm) Extraction stub Ø 160 mm Weight approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% absolute dry . Supplied as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta starting - Rapid hydraulic system - Auto stop for rotor idle run - 70–90 rpm for high throughput performance - Timed operation to prevent idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY . Shredder options: - Shredder height increased by 30 cm (prepared for conveyor belt) +€2,080 net - Inclined discharge conveyor +€8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet +€5,980 net - Control unit for conveyor & overband magnet +€2,750 net (start and stop each synchronized with the shredder) - Hopper extension +€940 net - Eco rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double blade row +€995 net . Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. will increase wear.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine available at a special price Another unit available immediately (ex works Neckartailfingen) * Includes 1 year warranty. Bodpfx Afsd Nnwls Aodb Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-established, reliable machine with proven performance Includes control cabinet with timer operation The press is switched on manually and runs until the set time on the timer (e.g., 4 hours) has elapsed. It will then switch off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to max. 20 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Silo volume: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals will increase wear --- Options at extra charge: - Timer function + €490 net Machine is started manually and switches off automatically after a preset period. - Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Now also available in 230 Volt Motor with 3 kW instead of 2.2 kW, Additional charge + €890 net (delivery time approx. 8 weeks) - Special pressing unit + €2,950 net

Būklė: naujas, Gamybos metai: 2026, Extremely Powerful Industrial Magnet for Iron Separation Special price €990 net (Shipping €14.90 net) *Refer to image 2 for construction lengths The active side features a stainless steel end plate (material grade 1.4301). Threaded holes are provided on the rear side for mounting *Handle available upon request Block magnet systems can be used at operating temperatures up to max. +100°C. The magnetic surface should be routinely cleaned of collected ferrous materials. Pick-up heights for all versions, e.g.: Approx. 60 mm for an M5 steel nut Approx. 100 mm for an M5 x 30 screw Installation example 1: Mounted above a conveyor belt, the iron parts "jump" to the magnet’s active surface. Bjdjtqfhxepfx Af Asdb Installation example 2: Integrated in a pipeline system with direct contact to the material flow. For maximum separation reliability, a cascade arrangement of multiple block magnets in series is possible. Installation and safety instructions: During handling, unpacking, and installation, ensure no loose ferrous parts (such as tools or screws) are nearby. The magnetic force is extremely strong and can cause painful injuries if fingers are caught between ferrous parts and the active surface. No steel components should be present within a minimum distance of 400 mm beneath the active side.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, veikimo valandos: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced blade protrusion, suitable for both hard and soft materials + 22 kW motor Bedpsx Af Rdofx Af Ajdb + Efficient square knives *For pallets: up to a maximum of 10 pallets per hour *Dependent on screen size and material. Significantly higher throughput with smaller wood waste. Motor: 22 kW; 400 V – 50 Hz – 3 ph, Screen: 15/20 mm or as agreed (options from 10 to 40 mm) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Extraction connection Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: machine color may vary Weight: 1920 kg. Standard features included: - Control cabinet with PLC control system - Automatic star/delta starter - High-speed hydraulics - Automatic stop when rotor is idle - Speed 70–90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: - Raise shredder by 30 cm (for conveyor belt preparation) + €2,480 net - Angle conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control system for conveyor belt and overband magnet + €2,750 net (synchronized start and stop with shredder) - Enlarged feed hopper 1500x1500 mm + €3,480 net Requirements for raw materials: - Moisture content (atro) must be below 25% - Feed material must be free of metals and mineral contaminants. Damage to tools and/or increased wear may result otherwise.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Machine available at special price Machine available immediately (ex works Neckartailfingen) Demonstration model Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine Including control cabinet with timer operation The press is started manually and then runs until the set time on the timer (e.g. 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm *depending on material Output capacity up to max. 25 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo volume: approx. 250 liters Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: -Wood chips and dust less than 15 mm in length -Moisture content below 15% ATRO -Sand, stones, metals, and minerals increase wear --- Options at extra cost: Bdodjfci D Ajpfx Af Ajb -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor 3 kW instead of 2.2 kW, Surcharge + €690 net (Delivery time approx. 8 weeks) ---

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Special-purpose machine for plastic shredding Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, offcuts from wood pallets, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Includes: - Special rotor with embedded knives (reduced load uptake) - Minimal cutting gap between cutter and counter-knife Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Control system: PLC Feed opening (top): 600 x 800 mm Recommended maximum material size: approx. 500 x 500 mm (*height less relevant) Hydraulically actuated pusher Screen perforation to choice (25–40 mm). For plastics, coarser screens (30–40 mm) are recommended. *If finer granulation is required, a two-stage shredding process with a downstream MVZ granulator (screens 5–15 mm) is recommended. Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Additional options for surcharge: - Shredder base raised by approx. 25 cm (prepared for conveyor discharge) + €1,980 net - Angle belt conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (start and stop synchronized with shredder) - Alternatively, manual start and stop on conveyor + €595 net Material requirements: Bdsdped H R Sxjfx Af Aeb - Moisture content (atro) must be below 25% - Metal and mineral contaminants such as sand or stones increase wear. We will gladly arrange a free trial with your material at our location in Neckartailfingen. Alternatively, you can ship your material to us, and we will document the test with photos and videos. --- *Only suitable for brittle plastics with medium hardness *Not suitable for elastic or extremely hard and heavy plastics, as this may affect machine durability. --- Larger machine versions available: Base machine: Shredder MGZ 830 K-S – 18.5 kW Feed opening (top): 800 x 1,000 mm Max. material size approx. 720 x 700 mm (*height less relevant) From €39,995 net – options priced as required Base machine: Shredder MGZ 1030 K-S – 22 kW Feed opening (top): 1,000 x 1,000 mm Max. material size approx. 900 x 700 mm (*height less relevant) From €49,975 net – options priced as required Base machine: Shredder MGZ 1330 K-S – 37 kW Feed opening (top): 1,300 x 1,200 mm Max. material size approx. 1,200 x 700 mm (*height less relevant) From €79,975 net – options priced as required

Gamybos metai: 2026, būklė: naujas, *The offer is only for the neodymium overband magnet, not the underlying conveyor belt. *Neodymium magnets are among the strongest magnets in the world. They have extreme holding force and should not be compared with ferrite magnets. Extremely high separation efficiency, depending on material layer height and input material. Probably the most compact overband magnet on the market. Competitors often use less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Control unit not included Surcharge for simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm *Nails are attracted and discharged to the side along a length of 600 mm, outside the magnetic field. This overband magnet should be installed approx. 7–10 cm above the material flow. *Mounting/suspension to be provided by the customer, depending on the maximum length of metal parts. Bedpedubpuofx Af Asdb Ideal for separating nails from wood chips. Optionally usable in a single-shaft shredder with extraction. Requirements: *Your belt width, or effective internal width (of the existing conveyor belt), should ideally be less than 55 cm. *Suitable for separating nails from material streams with a height less than 12 mm, and chip lengths smaller than 25 mm. ----- Optional at extra charge: Cross and incline belt demonstration units from €8,770 net.

Būklė: naujas, Gamybos metai: 2026, Skersmuo: 160 mm Papildomai, už papildomą mokestį, galima įsigyti šių skersmenų: 180, 200, 250, 300 mm. Dėl kitų skersmenų teiraukitės. Bsdpfx Aochuvrof Ajdb Labai tvirta pramoninė konstrukcija. Idealiai tinka vinių/metalo dalių atskyrimui iš medžiagos srautų. Pavyzdžiui, po medžio smulkintuvo. Komplekte 3 itin galingi magnetai. * Pageidaujant, gaminį galima aprūpinti iki 6 magnetų (papildomas mokestis už kiekvieną papildomą magnetą +49 €) - Papildomai galima pasirinkti neodimio magnetus vietoje feritinių. Jūsų privalumai: + Ypač didelės peržiūros durelės su tarpine lengvam vinių pašalinimui + Tvirtas greitojo užrakto mechanizmas + Pagaminta Vokietijoje Peržiūros durelės / anga: 35x18 cm Montavimo ilgis gali skirtis.

Būklė: naujas, Gamybos metai: 2026, Delivery time: approx. 4–5 months Your advantages: + Extremely large cutting unit opening: 1300 x 1200 mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful with 37 kW start-up power Technical data: Bsdsgbkkrspfx Af Aodb Color: grey / blue Feed opening, top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (RPM): 65–125 Power requirement (kW): 37 Screen perforation (mm): 10–40 (selectable) Tools: 37/70 knives Extraction port diameter (mm): 200 mm Dimensions (LxWxH): 2,430 x 2,410 x 1,735 mm Weight (approx. kg): 3,500 Options at extra cost: - Second knife row, for up to 30% higher throughput - High-speed hydraulics for increased throughput - Preparation for discharge conveyor - Discharge conveyor - Overband magnet HAWK-EYE *To shred veneer or paper (anything thinner than 3 mm), we recommend a segment floor. Special option, available at extra cost. --- Slider extension option *available at additional cost Maximum pallet size: up to 1200/1400 mm (with slider extension option, the upper cutting unit opening is 1300 x 1700 mm, surcharge: + €14,975) *significantly longer production time required. *Larger machines available on request --- Raw material requirements: - Moisture content (oven dry basis) must be below 20% - The feed material must be free from metals and mineral impurities. Tool damage and/or increased wear may otherwise result.

Būklė: naujas, Gamybos metai: 2025, Dar viena mašina iš karto prieinama! Briketų presas su PLC valdymu ir automatine briketų ilgio kontrole Našumas: iki 60 kg/h Briketas: 50 mm cilindrinis Variklis: 5,5 kW Matmenys: 1.900 x 1.350 x 1.410 mm Svoris: apie 860 kg Reikalavimai: Išeitinė medžiaga idealiai trumpesnė nei 25 mm drožlių ilgio Drėgnumas 6–12% ATRO Bdjdpfsv Rpxlex Af Ajb Mašina tinkama nepertraukiamam darbo režimui. Pvz., briketavimas iki 2,5 val.; 1 val. pertrauka ir pan. Jei mašiną reikia eksploatuoti ilgiau nei 2,5 val. nepertraukiamai, būtina prijungti papildomą aušinimą.

Būklė: beveik kaip naujas (parodų įrenginys), Demonstration unit with 7 operating hours Another machine available immediately (ex works Neckartailfingen) Shredder MRZ 830 Customs tariff number: 84659600 Feed opening: 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Knives: reversible several times Hydraulically operated pusher Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo clutch Standard features include: - Automatic star/delta start Bjdpfx Asv Sqrpef Asdb - High-speed hydraulics - Automatic shut-off when rotor is idling - Speed: 70-90 rpm for high throughput - Intermittent control to prevent idle times - Performance-boosting step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard and MDF panels, and other materials subject to testing and approval by the manufacturer. Includes: - Shredder elevated by 30 cm (prepared for conveyor belt installation) Additional shredder options: - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €6,780 net - Control system for conveyor belt and overband magnet + €2,750 net (Start and stop each synchronized with the shredder) Raw material requirements: - The moisture content (oven-dried basis) must be below 30%. - Metals and mineral impurities such as sand, stones, etc. will increase wear.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Special Price: €29,970 net One machine is available immediately. This is the ideal machine for shredding voluminous, lightweight aluminium chips or turnings. Not suitable for more solid aluminium parts. Included: + Optimized cutting geometry + Adapted pusher control + Load-dependent hydraulic pusher (which presses the chips against the cutting unit) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 40x40mm, multiple cutting edges (reversible), Rotor diameter: 260 mm, Control system: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume: approx. 0.6 m³, Hydraulically operated pusher Screen perforation selectable (15 - 40mm) Extraction connection Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Shredder raised by 30 cm (preparation for conveyor belt) +€2,990 net - Angle conveyor (discharge height approx. 220 cm) +€9,770 net - Overband magnet +€6,980 net - Control system for conveyor and overband magnet +€2,750 net (start and stop synchronized with shredder) Bodpfx Afegmh H Ts Asdb We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight and we will document the test with photos and videos.

Būklė: geras (naudotas), Used, in good condition. Technically inspected pre-owned machine Base machine starting from: €139,750 net *Options available at extra cost, see below Bdodpfofmqq Eex Af Ajb Delivery time approx. 16 weeks after order Briquetting press suitable, for example, for wood dust, spelt husks, enrichment material (e.g. for pigs to play with and chew on), animal feed, alfalfa or wood shavings. *Optionally, short briquette tablets can be produced Technical data: Throughput capacity up to max. 750 kg/h (material-dependent) (e.g. sawdust with a bulk density of 250 kg/m³) A precise statement regarding throughput performance is only possible after testing your material. Throughput can vary greatly depending on the bulk density of the input material. Commodity code: 84793010 Briquette Ø 65 mm Including 2 m press channel Main drive motor power 37 kW Feed auger with geared motor 2.2 kW Compactor auger 5.5 kW Hydraulic pump motor 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for machine status and load display for main drive and feed augers PLC control with operating hours counter in control cabinet Machine carries CE marking Automatic start-stop function Dimensions 3100x860x1800 mm (LxWxH) Weight: 3,800 kg Options at extra cost: Temperature control unit for pressing tools For maintaining an optimal temperature to ensure briquette quality. Temperature controller for pump, cooling unit, fan, and pressure switch Ready for connection – required for operation Including corresponding control system + €7,850 net Guillotine or tablet crusher For cutting briquettes to size + €6,900 net Compressed air connection required! Silo for MAP series + €19,940 net - Buffer silo above the machine - Volume approx. 6 m³, sturdy steel structure with agitator discharge and fill-level sensor. Transport piping / cooling section (nominal: 4x2m) Price per 2 meters: €990 net Assembly / commissioning (estimated 2-3 days on site) Billed according to actual time and documented separately. The following rates apply: Service technician/mechatronics engineer per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday and night hour: 50% surcharge Each Sunday and public holiday hour: 100% surcharge Daily allowance per technician: country-specific Per car/transporter kilometer: €0.98/km Travel and accommodation at actual cost or by flat rate charged to the client. Testing with customer-specific material (by arrangement, up to max. 750 kg) – €1,970 net flat rate Requirements for feedstock: - Moisture content (bone dry) must be between at least 6% and max. 15% - Maximum chip length 18 mm - Installation temperature: heated room at least +5°C - The feed must be free from metals and mineral impurities. Damage to the pressing tools and/or increased wear may otherwise result.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2023, All wear parts new only 704 operating hours Special price for a slightly used demo machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, which ensures consistent briquette quality even in continuous operation. The pressing process takes place without the addition of binding agents, relying solely on hydraulic pressing force. The volume of the input material can be reduced by up to 90%, depending on the material. Throughput rate: up to max. 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 litres Max. briquette length: 50 mm Opt. briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 litres Dimensions: 1750x1130x1100 mm (LxWxH) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Bjdpfsd N Dnhox Af Aedb Level sensor: yes Requirements for input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room, minimum +5°C - Max. load on agitator: 150 kg - The material feed must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.