Kryžminė Lentelė pirkti naudotą (758)

Būklė: naudotas, Cross table, controlled; cross-slide table; clamping table; clamping plate with T-slots; clamping angle bracket; NC cross table; linear robot; coordinate table - Controlled cross table: previously used as a soldering station Lrsdpfx Anohtn Sbe Ijl - Manufacturer: Walko, NC cross table type PNC 500 - Table surface: 600 x 300 mm - Travel distance approx.: X 500 mm / Y 350 mm - Dimensions: 1050/1030/H1530 mm - Weight: 240 kg

Būklė: naujas, Table length 330 mm Lrsdsupw Twepfx An Ijl Table width 220 mm X-travel 210 mm Y-travel 125 mm Table height 150 mm T-slots 12 mm Weight 33 kg Dimensions L x W x H 0.41 x 0.35 x 0.22 m Cross table with rotary plate

Būklė: naujas, Table length 430 mm Table width 240 mm X travel 225 mm Y travel 160 mm Table height 160 mm Lredoupw T Rspfx An Ijl T-slots 12 mm Weight 45 kg Dimensions L x W x H 0.6 x 0.45 x 0.2 m Cross table with rotary plate

Būklė: naudotas, Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Parduodama Fisher+Rueckle FZR-24 lukšto skersinio klijavimo mašina, pagaminimo metai 2013! Lukšto juostos ilgis: 400-1100 mm dviguba eiga / 350-2100 mm viena eiga Lukšto juostos plotis: 50-500 mm Lrsdeumrf Aepfx An Isl Lukšto juostos storis: 0,3-1,5 mm Maks. nominali galia / mašinos ciklai: 30 ciklų/min Vidutinis gamybos greitis: 17-20 ciklų/min Efektyvus šildymo zonos ilgis: 2478 mm Jungiamoji galia: 22 kW Suslėgtas oras: 6 bar Klijų tipai: PVA arba UREA pagrindo

Būklė: naujas, Specifikacija S120/S260 Darbinis plotis: 20–120 mm / 20–260 mm Darbinis storis: 12–50 mm / 12–80 mm Maksimali pjovimo dimensija: 80x50 mm / 180x80 mm / 150x100 mm Darbo stalo plotis: 330 mm / 330 mm Minimalus ruošinio ilgis: 400 mm / 400 mm Pašarų stalo greitis: 80 m/min / 80 m/min Pagrindinių pašarų ratų skaičius: 5 / 5 Pjūklo diskas: 405 mm / 455 mm / 455 mm / 510 mm Pjūklo veleno greitis: 3500 aps./min. / 3500 aps./min. Pjūklo variklio galia: 5,5 kW / 5,5 kW Pjūklo greitis (aukštyn-žemyn): 2–4 kartai/sek. / 2–4 kartai/sek. Kėlimo variklio galia: 3 kW / 3 kW Pašarų variklio galia: 3 kW / 3 kW Lrsdpfxeq Ny Efs An Isl Spaudimo ratuko variklio galia: 0,18 kW / 0,18 kW Bendra galia: 12,43 kW / 12,43 kW Suspausto oro sąnaudos: 1000 NL/min / 1000 NL/min Oro slėgis: 0,6 MPa / 0,6 MPa Dulkių nutraukimo diametras: Ф140 mm x2 / Ф140 mm x2 Nutraukimo greitis: 30 m/s / 30 m/s Svoris: 1000/1000 kg Matmenys: 6500x1400x1800 mm / 6500x1400x1800 mm Kaina: 31 000 / 32 500 € (EXW Jonava, Lietuva)

Būklė: labai geros būklės (naudotas), Katalogo numeris 7386 TECHNINIAI DUOMENYS - maks. disko skersmuo: 500 mm - veleno skersmuo: 30 mm Lodpfsy Tkgujx An Isrl - hidraulinis spaustuvas taip pat veikia kaip disko apsauga - disko hidraulinis eiga - maks. pjovimo plotis: 550 mm - 4 slydimo voleliai darbiniame stale - viršuje – traukiantis, dantytas, spaudžiamas velenas - maks. pjovimo aukštis (centre): 100 mm - pagrindinis variklis: 5,9 kW - dulkių ištraukimo jungčių skersmuo: 100 mm, 120 mm - darbinio stalo matmenys: 700x630 mm - stalo aukštis nuo pagrindo: 830 mm - padavimo volelių stalas - volelės ilgis: 350 mm Stalo matmenys: - ilgis/plotis: 4480x700 mm - variklis: 0,75 kW - priėmimo stalas (su juosta) - juostos plotis: 510 mm Stalo matmenys: - ilgis/plotis: 3130x800 mm - variklis: 0,75 kW - įrenginio matmenys ilgis/plotis/aukštis: 890x910x1200 mm - bendras svoris apie 900 kg – padavimo ir priėmimo stalai – hidrauliškai reguliuojamas diskas – naudota pjūklas, labai geros būklės Grynoji kaina: 24 900 PLN Grynoji kaina: 5 930 EUR (pagal kursą 4,2 EUR) (kainos gali skirtis esant didesniems svyravimams)

Būklė: labai geros būklės (naudotas), KATALOGO NR. 7181 TECHNINIAI DUOMENYS - maks. disko skersmuo: 300 mm - disko skylės skersmuo: 30 mm - disko apsauga - maks. pjovimo aukštis: 100 mm - maks. pjovimo plotis: 700 mm - galimybė pjauti kampu vertikalioje plokštumoje: +90°/-90° (perkeliant svirtį arba diską) - svirtis gali suktis į dešinę/į kairę - variklis: 2,2 kW - stalo matmenys: 950x700 mm - ištraukimo jungties skersmuo: 60 mm - matmenys (ilgis/plotis/aukštis): 1200x950x1400 mm - svoris: 155 kg PRIVALUMAI – italų gamyba – nedažyta – labai gera būklė – naudota pjūklas Lrodpsy S Argofx An Iol Grynasis kaina: 6500 PLN Grynasis kaina: 1550 EUR Kaina paskaičiuota pagal kursą 4,2 PLN/EUR (esant dideliems kursų svyravimams kaina gali keistis)

Būklė: labai geros būklės (naudotas), KATALOGO NR. 7680 TECHNINIAI DUOMENYS - didž. disko skersmuo: 500 mm - veleno skersmuo: 30 mm - hidraulinė disko eiga - didž. pjovimo plotis: 500 mm - didž. pjovimo aukštis (centre, su 500 mm diskeliu): 160 mm - pagrindinis variklis: 4 kW - stalo matmenys: 715x1070 mm - stalo aukštis nuo pagrindo: 790 mm - 2 ritininiai stalai - stalų matmenys: - padavimo, ilgis/plotis: 2000x640 mm - išėjimo, ilgis/plotis: 2000x640 mm - įrenginio matmenys ilgis/plotis/aukštis: 1400x940x1070 mm - bendras svoris: 480 kg PRIVALUMAI – 2 ritininiai stalai – hidraulinė disko eiga – naudotas pjūklas, labai geros būklės Lrodpfx Ansy R Dy As Iol Grynasis kaina: 15 900 PLN Grynasis kaina: 3 780 EUR pagal kursą 4,2 EUR (Kainos gali keistis esant didesniems svyravimams)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, KSF-2E yra pasaulyje pirmaujanti specializuota CNC frezavimo staklė, skirta visiškai automatizuotai gamybai ir aukštos kokybės kryžminių jungčių bei grotelių pilnam apdirbimui serijinėje langų ir durų skersinių gamyboje. Dėl agregatų staklės gamina aukščiausios kokybės kryžmines jungtis iš medžio, aliuminio, MDF ar PVC ir nepriekaištingai apdirba visus skersinių grotelių elementus. OPERACIJOS • Kryžminės jungtys įvairių formų ir matmenų • Skersinių galų apdirbimas • Rėmo profilių pjovimas pagal matmenis Staklės papildomai aprūpintos skersiniu padavėju / elementų sandėliu. Lrsdpfjxl Dnaex An Isl

Gamybos metai: 2010, būklė: geras (naudotas), 2 pcs. aluminum tables for measuring machine Manufacturer: MEUSBURGER Type: BST 5500 Year: 2010 Dimensions: Length 5500 mm, Width 1200 mm, Height 700 mm Lrjdpog Uf Ngsfx An Iol In good condition.

Būklė: naujas, Gamybos metai: 2026, CORMAK Z7016A Vario Bench Drill for Metal – Precision Column Drill with Infinitely Variable Speed Control The CORMAK Z7016 Vario bench drill is a compact and functional pillar drill designed for precise drilling operations in professional and workshop settings. Its stepless speed adjustment, robust construction, and versatile features provide maximum control over the drilling process and high work efficiency. Key Machine Advantages Lrjdpfxoxbzuvj An Isl - Infinitely variable speed control – range from 440 to 2600 rpm allows for optimal adjustment to the machined material. - Robust cast iron construction – ensures high rigidity and reduces vibration during operation. - Worktable with height and tilt adjustment – tiltable from -45° to +45° and equipped with rack-and-pinion height adjustment. - Laser alignment and LED lighting – guarantee maximum drilling precision and user comfort. - Electronic speed display – enables complete real-time parameter monitoring. - 65 mm vise included – machine ready to work immediately after unpacking. Design and Technology The Z7016A Vario metal bench drill is built on a solid 60 mm diameter column and a rigid cast iron base measuring 345 × 210 mm. The machine body and table are manufactured from precision-machined castings. The MT2 taper allows for a wide range of tool fits, and a 60 mm quill stroke enables deep hole drilling. The overall height of just 870 mm makes it an exceptionally ergonomic and mobile unit. Precision and Work Efficiency Equipped with a 500 W (S1) and 650 W (S6) motor, the CORMAK Z7016A Vario pillar drill enables efficient drilling in metal up to 16 mm in diameter. No need for belt changes – thanks to the seamless speed adjustment, machine setup time is significantly reduced. The ergonomic three-arm feed lever, depth gauge, and guided quill system ensure high repeatability and hole accuracy. Applications The Z7016A Vario is a bench drill for metal recommended for: - Metal and maintenance workshops - Maintenance departments - Technical schools - Small production lines and prototyping facilities Standard Equipment - 65 mm vise - Laser drilling pointer - LED work area illumination - Electronic speed display - Three-arm feed lever - Tilting table with rack-and-pinion height adjustment Technical Specifications Parameter Value Maximum drilling diameter 16 mm Spindle speed range 440 – 2600 rpm Power supply 230 V Spindle taper MT2 Max. quill travel 60 mm Distance spindle to column 125 mm Distance spindle to base 430 mm Table height adjustment range 300 mm Column diameter 60 mm Table dimensions 200 × 200 mm Base dimensions 345 × 210 mm T-slot width 14 mm Motor power (S1 / S6) 500 W / 650 W Overall height 870 mm Weight 31.5 kg

Būklė: naujas, Gamybos metai: 2026, The drill ensures perfect drilling quality thanks to its rigid construction. The tilting table allows for a wide range of machining operations. The device is equipped with an electronic speed indicator and drilling depth gauge. A 65 mm vise is included. Machine description: - Tilting table from -45° to +45° - Rigid machine construction - Table height adjustment via rack-and-pinion - Three-arm feed lever - Drilling depth gauge - Electronic speed indicator - Laser guide - Work area lighting Lrjdpfx Ansrif H Ee Ijl Technical specifications: MAX. DRILLING DIAMETER: 16 mm SPEED RANGE: 350–2400 rpm POWER SUPPLY: 230 V SPINDLE TAPER: MT2 MAX. SPINDLE STROKE: 90 mm SPINDLE-TO-COLUMN DISTANCE: 150 mm SPINDLE-TO-BASE DISTANCE: 430 mm TABLE HEIGHT ADJUSTMENT RANGE (ON COLUMN): 335 mm COLUMN DIAMETER: 60 mm TABLE DIMENSIONS: 240x240 mm BASE DIMENSIONS: 400x232 mm MOTOR POWER: 700 W HEIGHT: 910 mm WEIGHT: 46 kg

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 80 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, paskutinio kapitalinio remonto metai: 2026, tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Lodpfey S Ru Asx An Ierl Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Būklė: geras (naudotas), Gręžimo staklės, stacionarios gręžimo staklės, kolonos gręžimo staklės, dėžinės kolonos gręžimo staklės, sriegimo mašina, sriegimo gręžtuvas. - Gamintojas: Strands, stacionarios gręžimo staklės MK3 su kryžminiu stalu Demanders Lrodpfx Ajy Rx Egon Iol - Variklis: 0,75/1,0 kW - Apsisukimų diapazonas: 100 - 30 200 aps./min, 8 pakopų, dešinys/kairysis sukimas - Sriegimo įrenginys: per kojinį jungiklį - Stalo dydis: 500 x 195 mm - Kryžminio stalo eiga: X360 mm Y160 mm Z440 mm - Griebtuvo kūgis: MK3 - Griebtuvo eiga: 135 mm - Iškyša: 255 mm - Matmenys: 780/800/H1540 mm - Svoris: 218 kg

Būklė: naudotas, Gamybos metai: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood, featuring automatic detection and removal of wood defects. Lrsdewtgcxopfx An Isl Technical data: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Fuse protection: 25 A Condition: used

Gamybos metai: 2010, būklė: visiškai atnaujintas (naudotas), Bizerba TU100 totalizing table after overhaul Lrsdpfx Anoi Drwqs Isl

Būklė: geras (naudotas), 2.9 linear meters workbench, work table, packing table Condition: New Asking price: €120,-- net Description: You are bidding on approx. 2.9 linear meters, consisting of: - Beams with a length of 2.70 m - 2 frames - Height approx. 90 cm, depth 80 cm Surcharge for depth bars: €8,--/piece Large quantities available. Various configurations possible with different beam lengths: 0.9 m, 1.8 m, 3.3 m! Shipping/transport costs on request. Inspection possible at any time by appointment. Technical data, information and prices subject to change and error. Intermediate sale reserved! See our general terms and conditions. All prices excl. VAT, ex warehouse. Lrjdpsb Tdmyofx An Iel Purchase / Sales We are constantly looking for and offering numerous items from various sectors: - broom-clean company clearances - company liquidations - Fast - flexible - efficient! We also clear out for insolvency administrators. Send us a brief description and we will respond promptly.

Gamybos metai: 2005, būklė: geras (naudotas), I am selling a double mitre saw OMGA TRF 527, year of manufacture 2005. Cutting length: 390 - 2800 mm Maximum cutting width: 170 mm Maximum cutting height: 90 mm Ledpeg Tumcefx An Iorl Swivel heads: 0° +/- 45° 2 horizontal and 2 vertical pneumatic material clamps 2 motors x 1.62 kW (2.2 HP) Good condition. Available immediately.

Gamybos metai: 1991, būklė: naudotas, The Filtrox Cross Flow Microfilter operates with a permissible transmembrane pressure of 6 bar (0 °C - 95 °C) and a filtrate volume of 4.5 - 7 hl/h with a filter area of 26.4 m². Two pumps (20 kW) in the unfiltered product circuit transfer the medium to be filtered. Comes with a 16 hl agitator tank for cleaning purposes. Machine (additional function): Yeast beer recovery 1987-1991 Capacity: 7 hl/h Lrjdpjvcq Daofx An Ijl Permissible operating pressure: 10 bar Permissible operating temperature: 85 °C Filter area: 26 m² Current: 4.85/2.8 A Voltage: 220/380 V Frequency: 50 Hz Control system: Simatic S5 Equipment: 8 ceramic membrane modules (total filtration area 26.4 m²); high-pressure pump; 16 hl cleaning tank with agitator; various pipelines, valves, instrumentation, and control components

Būklė: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. Ljdpfsw Sy T Hex An Ijrl POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim

Būklė: naudotas, Gamybos metai: 2001, Abrasive belt length 1st unit: 2150 mm Max. working width: 1300 mm Number of belts: 3-belt 1st unit belt type: Cross belt 1st unit configuration: Cross belt with sanding pad 1st unit sanding pad: electronic segmented pads Abrasive belt size 1st unit: 150 x 4800 mm Drive 1st unit: kW 2nd unit: Longitudinal roller 2nd unit configuration: Steel calibrating roller Abrasive belt length 2nd unit: 2150 mm Abrasive belt width 2nd unit: 1350 mm Ledpfxsxzi S Nj An Ierl Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: Pad unit 3rd roller configuration: Electronic segmented pressure beam SDS system 3rd unit sanding pad: electronic individually controlled pads, 32 mm wide Abrasive belt length 3rd unit: 2150 mm Abrasive belt width 3rd unit: 1350 mm Suitable for lacquer sanding: Yes Belt blow-off: Yes Vacuum conveyor belt: Yes Feed speed fixed: stepless 5 - 15 m/min Control: touch screen control Electr./pneumatic belt oscillation: electric Infeed height: variable (lower table adjustable) Table lift: electro-motorized Table height display: digital Working height or feed table height: 880 mm Location: Nattheim

Būklė: naudotas, Gamybos metai: 2003, Overview This PALL microflow filtration system is designed for crossflow filtration of beer and enables continuous and fully automated clarification processes. The system is configured as a tandem unit with a capacity of up to 50 hl/h and is suitable for breweries with medium to high throughputs. It operates with membrane filtration modules that ensure gentle product handling and stable filtration performance. The plant includes pumps, an integrated CIP system, and Siemens-based automation, providing a high level of process control and hygiene. Technical Data - Capacity: approx. 50 hl/h (tandem system, 24-hour operation) - Filtration type: Crossflow (microfiltration) - Number of modules: 48 - Operating temperature range: 0 °C to 70 °C - Equipment: Pumps, integrated CIP system, complete piping, control system - Control system: Siemens S7 with Siemens OP07 HMI - Degree of automation: Fully automatic Lrjdjy Etcpepfx An Iel Equipment - Filtration modules (48 units) - Product pumps - Integrated CIP system - Complete piping system

Būklė: geras (naudotas), Gamybos metai: 1992, fully automatic programmable cross-cutting with additional marking detection for defect removal via LUT system infeed conveyor 6 m Lredpfjl H E Tasx An Iol 6 ejection stations, total length 12 m The infeed belt is currently not running, most likely due to a frequency converter issue

Būklė: naujas, Gamybos metai: 2025, Semi-automatic optimizing crosscut saw with electronic positioning system, featuring push/stop mode. COST-CUTTING OPTIMIZER Superpush 150 is an entry-level cutting and optimizing center. Developed as a direct technological evolution of traditional cutting methods, it is designed to increase productivity and improve wood yield. EXTREMELY ROBUST Constructed entirely of thick, reinforced painted steel. Horizontal table with movable safety guard for easy loading of workpieces. Carriage functions as both a length stop and pusher. Linear unit with toothed belt reinforced with internal steel inserts and linear guides with ball bearings. Continuous horizontal outfeed table with a width of 300 mm. TECHNOLOGICALLY INNOVATIVE Electronic system featuring a touch-screen control panel with integrated CNC. Custom-tailored Linux-based software interface. 15.6” color display, resistive touch screen, ensuring safety in industrial environments. Program import via USB. Remote tele-service via internet. + Excel Macros support. Ljdpsg Hzvgefx An Isrl FAST S4U Lite software. Brushless positioning motor with digital servo drive. Rapid selection interface for Stop/Pusher mode. Adjustable cutting speed. RELIABLE AND SAFE Ball-bearing linear guide with double dust protection. Freestanding, separate electrical control cabinet. Independent pneumatic adjustments to accommodate various processing requirements. Two-hand safety cutting control. CE-certified machine by official Certifying Body (not self-certified).

Būklė: geras (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, Diameter x width: 750 x 1,500 mm Max. operating pressure: 300 bar Lrjdpfx Aoqnvtzon Iel Cutting force: 60 kN Weight: approx. 2,800 kg 76 chisels