Krauss Maffei Km 320-2000 Pa Cn pirkti naudotą (24 920)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, KraussMaffei KM 320-2000 PA CN Injection Moulding Machine Year of manufacture: 2025 Machine with a five-point, twin-toggle clamping unit (three-platen design) featuring a servo-electric drive. Injection unit with servo-electric drive for injection, plasticizing and aggregate movement. Control system: MC P1 – industrial computer, real-time Ethernet. Plasticizing Unit Complete system for thermoplastics Screw diameter: 70 mm Nozzle radius: 15 mm Nozzle orifice: 6 mm Clamping Unit Clamping force: 3200 kN Mould opening force: 480 kN Platen dimensions (H × V): 1084 × 1034 mm Tie bar clearance (H × V): 820 × 770 mm Mould opening stroke: 650 mm Mould height (min.–max.): 300–700 mm Daylight: 1350 mm Ejector stroke: 240 mm Ejector force: 63 kN Gsdoyft Nzspfx Ah Aoit Ejector speed: 300 mm/s Injection Unit Screw diameter: 70 mm L/D ratio: 20.0 Injection pressure: 1877 bar Shot volume: 1078 cm³ Shot weight: 981 g Injection speed: 160 mm/s Injection rate: 616 cm³/s Screw speed: 191 rpm Plasticizing capacity: 65.9 g/s Nozzle contact force: 57 kN Electrical Parameters Connected load: 55.7 kW Installed heater capacity: 29.2 kW Number of heating zones (barrel): 6 Dry cycle time (EUROMAP 6): 2.39 s / 574 mm Weight and Dimensions Net weight incl. control cabinet: 23.2 t Machine dimensions (L × W × H): 7.57 × 2.22 × 2.32 m The machine is in a modern servo-electric configuration, providing high precision, energy efficiency, and process repeatability.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, KRAUSS MAFFEI KM 420-2000 CX Injection Moulding Machine Basic Data Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine Number: 61030600 Year of Manufacture: 2018 Control System: MC6 Control Panel: Colour monitor integrated with operator console The machine is equipped with a fully hydraulic clamping system and the advanced MC6 control system. Plasticising Unit Complete plasticising unit designed for processing thermoplastics. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: yes Nozzle type: open Nozzle radius: 15 mm Nozzle opening: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Platen dimensions (horizontal × vertical): 1270 × 1230 mm Tie bar spacing (horizontal × vertical): 800 × 800 mm Maximum mould opening stroke: 1020 mm Minimum mould height: 580 mm Maximum platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward / backward): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection throughput: 368 cm³/s Screw speed: 285 rpm Plasticising rate: 72.2 g/s Nozzle contact force: 82 kN Electrical & Hydraulic Equipment Pump motor rated power: 75 kW Installed heater power: 29 kW Number of barrel heating zones: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Machine Dimensions & Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (L × W × H): 6.90 × 2.49 × 2.38 m Maximum mould weight: 6700 kg Optional ESS (Energy Saving Systems) The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the hydraulic pump motor via a frequency inverter, adapting the motor speed to the actual demand during each production cycle. Key Benefits - Reduction of electrical energy consumption by up to 30% - Hydraulic pump servo drive technology - Worldwide quality and proven industrial technology - Reduced energy losses during idle running Gisdpfjyugkwox Ah Aot - Lower hydraulic system temperature rise - Extended service life of hydraulic components - Retrofit possible on existing hydraulic injection moulding machines

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Injection Moulding Machine Krauss Maffei KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Clamping Unit: Clamping force [kN]: 13,000 Platen dimensions (H x V) [mm]: 2210 x 1910 Tie-bar spacing (H x V) [mm]: 1570 x 1270 Min./max. mould height [mm]: 700–1400 Maximum opening stroke [mm]: 3050 Maximum ejector stroke [mm]: 350 Injection Unit: Screw diameter [mm]: 105 Injection volume [cm³]: 5195 Shot weight (PS) [g]: 4728 Injection pressure [bar]: 2296 Maximum injection speed (PS) [g/s]: 186 Electrical–Hydraulic Equipment: Rated pump motor power [kW]: 132 Rated screw motor power [kW]: 145 Gijdpfxoy Hqwye Ah Aot Heater power [kW]: 71 Dimensions and Weight: Net weight with control cabinet [t]: 70 Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional Equipment: Parallel movements: Independent hydraulic drive for the screw Hot runners: 12 integrated temperature control zones Cores: 3 hydraulic circuits (2 on the moving platen, 1 on the fixed platen) Pneumatics: 2 air valves (blow-off) + 1 valve for hot runner needle control Hydraulic accumulator Cooling: 20 rotameter system (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – barrel thermal insulation

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, KRAUSS MAFFEI Injection Molding Machine KM 1100-12000 MX Basic Information Manufacturer: Krauss Maffei Model: KM 1100-12000 MX Year of manufacture: 2008 Control system: MC5 Control panel: color display integrated with the operator console Interfaces: 3 USB ports The machine is equipped with a fully hydraulic clamping system and a complete plasticizing unit for processing thermoplastics, with abrasion protection. Clamping Unit Gijdpfx Ahoyugfze Ajt - Clamping force: 11,000 kN - Mold opening force: 770 kN - Platen dimensions (horizontal × vertical): 2210 × 1910 mm - Tie-bar spacing (horizontal × vertical): 1550 × 1250 mm - Mold opening stroke: 2000 mm - Minimum mold height: 600 mm - Maximum mold height: 1200 mm - Platen stroke: 2600 mm - Ejector stroke: 300 mm - Ejector force: 220 / 110 kN Injection Unit - Screw diameter: 120 mm - Maximum injection pressure: 1758 bar - Injection volume: 6786 cm³ - Shot weight (PS): 6175 g - Screw speed (standard / option): 103 / 145 rpm - Injection rate (standard): 1118 cm³/s - Injection rate (accumulator): 1696 cm³/s Electrical & Hydraulic Equipment - Rated pump motor power: 132 kW - Installed heater power: 82 kW - Number of cylinder heating zones: 7 - Number of dry cycles (EUROMAP): 802 cycles/h - Hydraulic oil tank capacity: 2440 l Machine Dimensions & Weight - Net weight (incl. control cabinet): 73 t - Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Optional Energy Saving System ESS (Energy Saving Systems) The machine can be fitted with a state-of-the-art ESS servo drive system, significantly increasing the energy efficiency of hydraulic injection molding machines. The system regulates the operation of the hydraulic pump motor using a frequency inverter, adjusting the motor speed according to current demand during the production cycle. Main Benefits - Reduction of electrical energy consumption by up to 30% - Hydraulic pump servo drive technology - World-class quality and proven technology used in the plastics processing industry - Reduced energy losses during idle operation - Lower heating of the hydraulic system - Extended lifespan of the motor and hydraulic components - Possibility to retrofit existing hydraulic injection molding machines The ESS system allows for significant reduction of the machine’s operating costs while maintaining full production parameters.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Krauss Maffei KM 1300-12000 MX Injection Moulding Machine Manufacturer: KraussMaffei Model: KM 1300-12000 MX Year of manufacture: 2012 Machine designed for thermoplastics processing, equipped with a complete plasticizing unit featuring abrasion-resistant protection. Technical Data Clamping Unit Clamping force: 13,000 kN Mold opening force: 910 kN Platen dimensions: 2210 × 1910 mm Tie bar spacing: 1570 × 1270 mm Ejector stroke: 350 mm Ejector force: 250 / 125 kN Injection Unit Screw diameter: 105 mm Injection pressure: 2296 bar Shot volume: 5195 cm³ Shot weight for PS: 4728 g Injection rate: 856 cm³/s Plasticizing Parameters Screw speed: 103 / 145 rpm Plasticizing rate (PS): - standard speed: 122 g/s - increased speed (option): 171 g/s Electro-Hydraulic Equipment Pump motor rated power: 132 kW Installed heater power: 71 kW Number of barrel heating zones: 7 Dry cycle time per Euromap 6: 765 cycles/h Oil tank capacity: 2440 l Dimensions and Weight Gedpfx Ajyrrwkeh Aoit Net weight with control cabinet: 70 t Installation dimensions: 13.03 × 3.65 × 2.82 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1,877 bar Dosage volume: 1,077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630 x 630 mm Platen size: 995 x 1,050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Injection unit hardened - bimetallic Energy-efficient machine – equipped with a system of 3 hydraulic pumps with variable output Gjdpfxoy Dqiwo Ah Aoit Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Robot: Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes powered by electric servomotors (X, Y, Z, B); C-axis Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50 x 2.20 x 2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Būklė: naudotas, Gamybos metai: 2023, veikimo valandos: 22 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61035145, spaudimo jėga: 1 200 kN, varžto skersmuo: 35 mm, darbinio tūrio: 393 cm³, įpurškimo slėgis: 2 429 juosta, injekcijos svoris: 140 g, formos aukštis (min.): 200 mm, išmetimo jėga: 33 000 N, išstūmimo eiga: 120 mm, atvērimo eiga: 950 mm, įrengimo aukštis: 450 mm, bendras ilgis: 5 650 mm, bendras plotis: 1 820 mm, bendras aukštis: 1 950 mm, bendras svoris: 6 700 kg, šildymo galia: 15,5 kW (21,07 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 570 mm, įrankio svoris: 600 000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: Giedpjy Rmwdjfx Ah Ast The base model injection moulding machine, the precisionMolding, is the perfect entry-level solution for all-electric injection moulding, enabling rapid and innovative responses to market requirements. It combines high performance, ease of operation, and short delivery times. It can be used in a wide range of applications, such as in the packaging industry, electrical and electronics sectors, medical technology, and the automotive industry. Key benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Fast delivery times thanks to the base machine concept with a wide range of options. TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) CONTROL SYSTEM  MC P1 with 15" TFT colour display with multi-touch functionality CLAMPING UNIT  Clamping force kN 1200  Maximum mould opening force kN 180  Clearance (h x v) mm 520 x 470  Mounting platen (h x v) mm 690 x 640  Mould installation height min. - max. mm 180 - 450  Maximum opening distance mm 850  Maximum mould opening stroke mm 450  Ejector drive electric  Ejector stroke mm 120  Ejector force fwd/rtn kN 27 / 33  Ejector speed fwd/rtn mm/s 300 / 300  Maximum mould weight kg 850 INJECTION UNIT  Screw diameter / type mm 35 / standard  Effective L/D ratio 22.9  Injection pressure bar 2429  Shot volume cm³ 154  Shot weight at max. stroke for PS g 140  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 374  Plasticising rate (standard screw) g/s 18.9  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 22.7  Installed heating capacity kW 11.5  Power supply V / Hz 200 / 50, 3-phase with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 6.7  Length x width x height m 5.18 x 1.76 x 1.90 ADDITIONAL EQUIPMENT  Wear-resistant plasticising system  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve 1-fold (BWAP)  Pneumatic control for hot runner shut-off 1-fold  Electric interface for pneumatic cascade 4-fold  Euromap handling interface E18 + E67  Euromap interface (central computer) E67, E77  Water battery 4-fold  Electrical preparation for hydraulic auxiliary unit  Automatic central lubrication  Adaptive Process Control (APC)  Injection-compression moulding function  Graphic analysis package  Swivelling device for the injection unit The machine is located at our factory in Parsdorf and is available at short notice. Further additional options can be offered upon request. We look forward to your enquiry.

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036679, spaudimo jėga: 1 600 kN, varžto skersmuo: 40 mm, darbinio tūrio: 393 cm³, įpurškimo slėgis: 1,892 juosta, injekcijos svoris: 358 g, formos aukštis (min.): 200 mm, išmetimo jėga: 33 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 950 mm, įrengimo aukštis: 500 mm, bendras ilgis: 5 650 mm, bendras plotis: 1 820 mm, bendras aukštis: 1 950 mm, bendras svoris: 9 700 kg, šildymo galia: 15,5 kW (21,07 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 570 mm, įrankio svoris: 600 000 g, Injection molding machines directly from the manufacturer! As the manufacturer KraussMaffei, we are offering you our inspected and flexible stock machines: The base injection molding machine, precisionMolding, is the ideal entry-level solution for fully electric injection molding, enabling fast and innovative responses to market demands. It combines high performance, user-friendly operation, and short delivery times. It is suitable for a variety of applications, such as packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimized price-performance ratio for a wide range of applications – High energy efficiency through a fully electric machine concept – Fast delivery times thanks to a base machine concept with a broad range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) CONTROL SYSTEM • MC P1 with 15" TFT color touchscreen with multitouch functions CLAMPING UNIT • Clamping force kN 1600 • Maximum mold opening force kN 120 • Clear distance (h x v) mm 570 x 520 • Mounting plate size (h x v) mm 770 x 720 • Mold installation height min. - max. mm 200 - 500 • Opening stroke mm 950 • Maximum mold opening travel mm 450 • Ejector drive: electric • Ejector stroke mm 100 • Ejector force fwd/rev kN 33 / 33 • Ejector speed fwd/rev mm/s 300 / 300 • Maximum mold weight kg 1200 INJECTION UNIT • Screw diameter/type mm 50 / standard • Effective L/D ratio 20.2 • Injection pressure bar 1892 • Shot volume cm³ 393 • Shot weight at max. stroke for PS g 358 • Injection speed mm/s 200 • Injection flow rate cm³/s 393 • Screw drive/speed rpm 267 • Plasticizing rate (standard screw)4) g/s 36.5 Giedpfx Ahjyzz Irs Ast • Nozzle contact force kN 42 ELECTRICAL PARAMETERS • Connected load kW 31.2 • Installed heating capacity kW 15.5 • Power supply V / Hz 400 / 50, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet t 9.7 • Dimensions L x W x H m 5.65 x 1.82 x 1.95 ADDITIONAL FEATURES • Wear-resistant plasticizing system • BluePower full insulation of plasticizing cylinder • Open nozzle • Air valve single (BWAP) • Pneumatic hot runner control, single circuit • Electrical interface for pneumatic cascade, 4-fold • Euromap interface handling E18 + E67 • Euromap interface (central computer) E67, E77 • Water manifold 4-fold • Electrical prep for hydraulic auxiliary unit • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression function • Graphic analysis package • Swiveling device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras available on request. We look forward to your inquiry.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2008, veikimo valandos: 6 200 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 4 200 kN, varžto skersmuo: 75 mm, Krauss-Maffei KM 420-2000 CX Injection molding machine from Krauss-Maffei with 420 tons of clamping force. Only 6,000 automatic operating hours. Year of manufacture: 2008. MC5 control system. Screw diameter: 75 mm. Extras: 8 hot runner zones. 2 cores on the fixed platen, 2 cores on the moving platen. 1 pneumatic valve on the moving platen. The injection molding machine is delivered RE-Conditioned by the UK Transitus expert technical team. Commissioning at the customer's site can be offered, ensuring proper operation upon installation completion. Technical Details SCREW DIAMETER: 75 mm INJECTION PRESSURE: 1635 BAR INJECTION VOLUME: 1237 cm³ INJECTION WEIGHT: 1126 g MAX. DISTANCE BETWEEN PLATENS: 1400 mm MINIMUM MOLD HEIGHT: 380 mm OPENING STROKE: 1020 mm DISTANCE BETWEEN TIE BARS: 900 x 800 mm PLATEN DIMENSIONS: 1270 x 1230 mm SCREW DIAMETER: 75 mm CLAMPING FORCE: 4200 kN Gisdpfswq D Efjx Ah Ast YEAR OF MANUFACTURE: 2008 OPERATING HOURS: 6282

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036946, spaudimo jėga: 800 kN, varžto skersmuo: 40 mm, darbinio tūrio: 201 cm³, įpurškimo slėgis: 1 860 juosta, injekcijos svoris: 183 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 850 mm, bendras svoris: 5 600 kg, šildymo galia: 11,5 kW (15,64 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 735 mm, įrankio svoris: 600 000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for fully electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short lead times. Suitable for a wide range of applications, such as the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Short delivery times made possible by the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) Giedpfx Ahjud H Dme Aet CONTROL SYSTEM - MC P1 with 15" TFT colour screen featuring multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Clear width (h x v): mm 470 x 420 - Mounting plate (h x v): mm 610 x 560 - Mould installation height min. - max.: mm 150 - 400 - Opening width: mm 750 - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force fwd/rev: kN 22 / 22 - Ejector speed fwd/rev: mm/s 300 / 300 - Max. mould weight: kg 600 INJECTION UNIT - Screw diameter / type: mm 40 / standard - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 - Stroke volume: cm³ 201 - Shot weight at max. stroke (PS): g 183 - Injection speed: mm/s 200 - Injection flow: cm³/s 251 - Screw drive / speed: 1/min 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS - Net weight (with control cabinet): t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising system - BluePower full insulation for plasticising cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot-runner shut-off, single - Electrical interface for cascade control, 4x - Euromap interface for handling, E18, E63 - Euromap interface (central computer), E67, E77 - Water manifold, 4x - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression moulding control - Graphics analysis package The machine is located at our Parsdorf facility and is available at short notice. Further optional extras are available on request. We look forward to your enquiry.

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036936, spaudimo jėga: 800 kN, varžto skersmuo: 35 mm, darbinio tūrio: 135 cm³, įpurškimo slėgis: 1 837 juosta, injekcijos svoris: 123 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 820 mm, bendras svoris: 5 900 kg, šildymo galia: 8,9 kW (12,10 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 470 mm, įrankio svoris: 600 000 g, Injection moulding machines direct from the manufacturer! As manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, straightforward operation, and short delivery times. This machine is suitable for a wide range of applications, including the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to an all-electric machine concept – Fast delivery times through the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, year 2023) CONTROL SYSTEM  MC P1 with 15" TFT colour screen featuring multi-touch capabilities CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platens (h x v) mm 610 x 560  Minimum – Maximum mould height mm 150 – 400  Max. opening width mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forward/back kN 22 / 22  Ejector speed forward/back mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke (PS) g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticising rate (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating capacity kW 8.9  Power supply V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticising  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve 1-fold (BWAP) Gjdpfxsuggb Ds Ah Aeit  Pneumatic control hot runner shut-off 1-fold  Electrical interface for cascade control 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces for handling E18, E63  Euromap interface (central computer) E67, E77  Water manifold 4-fold  Automatic central lubrication  Adaptive Process Control (APC)  Injection-compression moulding function  Graphics analysis package  Swivelling device for injection unit The machine is located at our site in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036721, spaudimo jėga: 6 500 kN, varžto skersmuo: 70 mm, tarpas tarp stulpų: 1 110 mm, darbinio tūrio: 1 078 cm³, įpurškimo slėgis: 1 877 juosta, injekcijos svoris: 981 g, atvērimo eiga: 3 200 mm, plokštės aukštis: 1 540 mm, pavaros tipas: Hydraulisch, laisvas tarpatramis: 3 200 mm, įrankio svoris: 2 200 000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you here our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. The sophisticated GuideX sliding shoe perfectly absorbs forces and extends the lifetime of the moulds. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly and highly stable in value. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT colour display with multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Max. mould open force kN 455 - Tie bar spacing (h x v) mm 1110 x 960 - Platen size (h x v) mm 1540 x 1440 - Mould installation height min.-max. mm 1550 (without center platen) - Daylight mm 3200 - Max. opening stroke mm 1650 - Max. mould weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter/type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight max. stroke PS g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticising rate g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter/type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight max. stroke PS g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 Godpfxjw U N Ixe Ah Aoit - Screw drive speed 1/min 285 - Plasticising rate g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL SPECIFICATIONS - Connected load kW 341 - Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticising unit - BluePower full insulation for plasticising cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mould heating 96-fold (3.5 kW) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical center platen - Parallel clamping and opening movement during injection process with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface—signal interface for connecting an RPM system - Electrical interface for HRS Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/reject part separation The machine is located at our factory in Parsdorf and is available at short notice. Additional options available upon request. We look forward to your enquiry.

Būklė: geras (naudotas), Gamybos metai: 2002, Krauss Maffei KM 420-2700 C2 liejimo mašina Pagrindiniai duomenys • Gamintojas: Krauss Maffei • Modelis: KM 420-2700 C2 • Pagaminimo metai: 2002 • Serijos numeris: 424227 Uždarymo mazgas • Užspaudimo jėga: 4200 kN (420 t) • Tvirtinimo plokščių matmenys (Aukštis x Plotis): 1270 x 1200 mm • Atstumas tarp kolonų (Aukštis x Plotis): 800 x 800 mm • Min. formos aukštis: 380 mm • Maks. formos aukštis: 1020 mm • Maksimalus atidarymo eiga: 1400 mm Liejimo mazgas • Sraigto skersmuo: 80 mm • Liejimo tūris: 1433 cm³ • Liejimo svoris: 1304 g (PS) • Maksimalus liejimo slėgis: 1829 bar • Maksimali temperatūra: 375°C Elektros ir hidraulinė sistema • Maitinimas: 400 V • Fazės: 3~ • Dažnis: 50 Hz • Bendra srovė: 237 A • Apsauga: 250 A • Siurblio variklio galia: 75 kW Gsdpfjy I Tq Eox Ah Aoit • Kaitinimo galia: 36 kW Išmatavimai ir svoris • Mašinos svoris: apie 22 000 kg • Išmatavimai (Ilg. x Pl. x Aukšt.): 7,06 x 2,33 x 2,51 m

Būklė: geras (naudotas), Gamybos metai: 2014, Uždarymo jėga: 1150 t Strypų atstumas (A x V): 1580x1280 mm Varžto skersmuo: 90 mm Šūvio svoris: 2084 g Gjdpfx Ahey Epp Ae Aeit Šūvio tūris: 2290 cm3 Tipas: Horizontalus Pavara: Hidraulinė

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2002, veikimo valandos: 66 160 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 3 000 kN, varžto skersmuo: 60 mm, darbinio tūrio: 679 cm³, Clamping force: 3000 kN Maximum mold opening force: 160 kN Moving platen drive force (opening): 86 kN Moving platen drive force (closing): 68 kN Mounting platen (H x V): 995 x 1050 mm Clear width (H x V): 630 x 630 mm Mold opening stroke: 820 mm Minimum mold installation height: 330 mm Maximum opening width: 1150 mm Ejector stroke: 200 mm Ejector force forward/backward: 58 kN Injection unit: Screw diameter: 60 mm L/D ratio: 21 Injection pressure: 2000 bar Stroke volume: 679 ccm Shot weight (PS): 618 g Injection flow rate: 325 ccm/s Screw speed: 259 rpm Plasticizing rate: 58 g/s Nozzle contact force: 110 kN Electro-hydraulic equipment: Rated power pump motor: 45 kW Installed heating capacity: 23 kW Number of temperature control zones (barrel heating): 6 Oil capacity: 720 l Dimensions and weights: Space requirement approx.: 6.20 x 2.20 x 2.40 m Total weight: 12,500 kg Max. mold weight: 3,430 kg Accessories: - Vibration-damping elements - 10-way water manifold Gedpey Nk Uqofx Ah Aoit Additional equipment: - 1 x air valve - 3 x core pullers - 3 x hot runner control zones - Robot interface according to Euromap 67

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Krauss Maffei Injection Moulding Machine KM 350–2700 C2+ 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of manufacture: 2004 Type: hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, disk drive station) 🔧 Clamping Unit Clamping force: 3500 kN (350 tons) Opening force: 220 kN Moving platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight opening: 1300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Injection throughput: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticising System: - Version for thermoplastics with abrasion protection - Non-return valve + open nozzle ⚡ Electro–Hydraulic System Pump motor power: 75 kW Giedpfx Ahsyv E Nvo Ajt Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank capacity: 720 l 👉 The machine is a very good candidate for ESS retrofit (energy savings up to 30–60%) 📐 Dimensions and weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Krauss Maffei KM 160–1000 CX liejimo mašina 🔹 Pagrindinė informacija Gamintojas: Krauss Maffei Modelis: KM 160–1000 CX Pagaminimo metai: 2012 Darbo valandos: 57 654 moto valandos Kategorija: Hidraulinė liejimo mašina 🔧 Uždarymo agregatas Uždarymo jėga: 1600 kN (160 t) Plokščių matmenys: 820 × 845 mm Kolonų atstumas: 520 × 520 mm Minimali formos aukštis: 300 mm Maksimalus atidarymo eiga: 950 mm 💉 Liejimo agregatas Sraigto diametras: 50 mm Liejimo tūris: 432 cm³ Liejimo svoris: 393 g Gedpfxeyv E E Do Ah Aoit Liejimo slėgis: 2304 bar ⚡ Elektrohidraulinė sistema Siurblio variklio galia: 37 kW Šildytuvų galia: 18,7 kW 👉 Galimybė įdiegti energiją taupančią sistemą (ESS) – realus energijos sąnaudų mažinimas net iki 30–60% 📐 Matmenys ir svoris Įrenginio svoris: 9 t Matmenys (ilgis × plotis × aukštis): 5,54 × 2,06 × 2,18 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Liejimo mašina: Krauss Maffei KM 800-5000 MC Pagaminimo metai: 2001 Gedpfx Asxqh I Ieh Aeit Darbo valandų skaičius: 70 000 h Konfigūracija: Mašina su robotu, apsaugine tvora ir transporteriu Prieinamumas: Galimos dvi identiškos mašinos Uždarymo sistema: Uždarymo jėga: 8 000 kN Maksimali formos atidarymo jėga: 356 kN Judamos plokštės (atidarant) jėga: 98 kN Judamos plokštės (uždarant) jėga: 92 kN Formos plokštės matmenys (Aukštis x Plotis): 1 610 mm x 1 530 mm Atstumas tarp kolonų (Aukštis x Plotis): 1 120 mm x 1 000 mm Formos atidarymo eiga: 1 400 mm Minimalaus formos aukštis: 600 mm Maksimalus formos atidarymas: 2 000 mm Hidraulinio išstūmiklio eiga: 250 mm Liejimo skyrius: Sraigto skersmuo: 90 mm L/D santykis: 23 Liejimo slėgis: 1 742 bar Liejimo tūris: 2 863 cm³ Liejimo masė (PS): 2 605 g Matmenys ir svoris: Mašinos matmenys (Ilgis x Plotis x Aukštis): 10,5 x 2,86 x 2,89 m Svoris: 43 tonos

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2003, spaudimo jėga: 3 500 kN, varžto skersmuo: 70 mm, injekcijos svoris: 998 g, Šis "Krauss Maffei KM 350-3000" pagamintas 2003 m. Jo prispaudimo jėga yra 3500 kN, o didžiausia atidarymo eiga - 920 mm. Mašina gali apdoroti įvairias medžiagas, įskaitant PA, PP, PE ir ABS. Jei norite gauti aukštos kokybės liejimo pajėgumus, apsvarstykite mūsų parduodamą hidraulinę liejimo mašiną "Krauss Maffei KM 350-3000". Susisiekite su mumis dėl išsamesnės informacijos. • Smūgio tūris: 1097 cm³ • Apdorotos medžiagos: PA, PP, PE, ABS • Cilindro temperatūra: iki 450 °C • Formos atidarymo jėga: 220 kN • Judėjimo jėga (judanti plokštė): atidarymo 105 kN / uždarymo 95 kN • Didžiausia atidarymo eiga: 920 mm • Minimalus formos aukštis: 380 mm • Didžiausia dienos šviesa: 1300 mm • Formos plokščių dydis (H x V): 1060 x 1095 mm Godpfx Ahoyyxmve Asit • Atstumas tarp rišamųjų strypų (H x V): 710 x 710 mm • Išstūmimo eiga: 250 mm • Išstūmimo jėga (pirmyn/atgal): 95 / 49 kN • Didžiausias formos svoris: 4950 kg Papildoma įranga • Valdymo sistema: "Wittmann" su tokia roboto eiga (X / Y / Z): (420 / 1200 / 2000 mm)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, spaudimo jėga: 8 000 kN, varžto skersmuo: 85 mm, injekcijos svoris: 2 452 g, Šis "Krauss Maffei KM 800-6100MX" pagamintas 2007 m. Jo prispaudimo jėga yra 8000 kN, o įpurškimo tūris - 2695 cm³, todėl jis tinka įvairioms medžiagoms, pavyzdžiui, PA, PP, PE ir ABS. Mašinoje sumontuota "Wittmann" robotų sistema, užtikrinanti geresnes manipuliavimo galimybes. Jei ieškote aukštos kokybės liejimo pajėgumų, apsvarstykite mūsų parduodamą hidraulinę liejimo mašiną "Krauss Maffei KM 800-6100MX". Susisiekite su mumis dėl išsamesnės informacijos. • Įpurškimo įrenginys: 6100 • Įpurškimo tūris: 2695 cm³ • Įpurškimo slėgis: 2242 bar Godpfx Aheyyxc De Ajit • Apdorotos medžiagos: PA, PP, PE, ABS ir kt. • Cilindro temperatūra: iki 450 °C • Galimybė įsigyti: Galimybė: 2027 m. pradžioje Papildoma įranga • Apdorojimas: "Wittmann" robotų sistema • Modelis: W743 • Maitinimas: 400 V, 18 A / 12,5 kVA • Ašių eiga: X 1200 mm, Y 2000 mm, Z 4000 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Krauss Maffei KM 420-3000 CX Injection Moulding Machine Year of manufacture: 2011 Control system: MC5 Clamping unit: Clamping force: 4200 kN Gisdpjydbbvjfx Ah Aot Tie bar spacing (h x v): 900 x 800 mm Platen dimensions (h x v): 1400 x 1250 mm Min. mould height: 780 mm Max. daylight between platens: 1400 mm Ejector stroke: 250 mm Ejector force (fwd/rev): 95.4 / 48.6 kN Max. mould weight: 6700 kg Injection unit: Screw diameter: 80 mm Injection pressure: 1856 bar Shot volume: 1608 cm³ Shot weight (PS): 1464 g Injection rate: 478 cm³/s Screw speed: 220 / 285 rpm Nozzle contact force: 129.4 kN Additional equipment: 2 x hydraulic nozzle control (GK) 2 x hydraulic core pull control – moving platen 1 x hydraulic core pull control – fixed platen Dosing unit colourant control 14 GK heating zones Electrical and general data: Pump motor power: 75 kW Installed heating capacity: 36 kW Power supply: 400 V / 50 Hz Oil volume: 1075 l Machine weight: 23.7 t Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2014, veikimo valandos: 35 000 h, Funkcionalumas: visiškai funkcionalus, Krauss-Maffei KM 1150/4300 MX Horizontali injekcinė mašina iš Krauss-Maffei gamintojo, 1150 tonų uždarymo jėga. Pagaminimo metai: 2014. Darbo valandos: 35 640. MC6 valdymo sistema. Papildoma komplektacija: ABB 6 ašių robotas, 24 karšto kanalo zonos, sekvenciniai 10 pneumatinių + 10 hidraulinių. Galima parodyti gamyboje. Techninės detalės UŽDARYMO JĖGA: 11 500 kN DARBO VALANDOS: 35 600 SRIEGINIO VARŽTO SKERSMUO: 90 mm INJEKCIJOS SLĖGIS: 1 839 bar INJEKCIJOS TŪRIS: 2 290 cm³ INJEKCIJOS SVORIS: 2 084 g Gisdpfxey Efkre Ah Aet ATIDARYMO EIGA: 2 000 mm PLATINŲ MATMENYS: 2 210 x 1 910 mm MINIMALUS FORMOS STORIS: 600/1 200 mm PAGAMINIMO METAI: 2014

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 9 585 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 600 kN, varžto skersmuo: 55 mm, tarpas tarp stulpų: 520 mm, darbinio tūrio: 523 cm³, įpurškimo slėgis: 1 904 juosta, bendras ilgis: 6 700 mm, bendras plotis: 1 600 mm, bendras aukštis: 2 300 mm, bendras svoris: 10 900 kg, Uždarymo jėga: 1.600 kN – svirties mechanizmas Kolonų atstumas: 520 x 470 mm Plokštės dydis: 710 x 660 mm Įrengimo aukštis: 200 – 500 mm Atidarymo eiga: 950 mm Sraigto skersmuo: 55 mm Įpurškimo tūris: 523 ccm Įpurškimo slėgis: 1.904 bar Įranga Ekrano tekstas vokiečių kalba CEE lizdas 16A CEE lizdas 32A Slėgio akumuliatorius padidintam įpurškimo našumui Po 3 laisvai programuojamus įėjimus ir išėjimus Branduolio traukiklis pneumatinis 2x Mašina su vandens baterija Mašina be medžiagos bunkerio Lygiavimo elementai Sąsaja dažymo įrenginiui Sąsaja temperatūros palaikymo prietaisui USB sąsaja Gsdpfx Asy Aktmeh Aoit Schuko lizdas 10A Dėvėjimuisi atspari plastifikavimo dalis Įrankio šildymas 24x Mašinos matmenys (I x P x A): 6.700 x 1.600 x 2.300 mm Bendras svoris: 10.900 kg

Būklė: geras (naudotas), Gamybos metai: 2013, spaudimo jėga: 16 000 kN, Įranga: dokumentacija / vadovas, Uždarymo jėga: 1600 t Sraigto skersmuo: 135 mm Giodpfx Ahjyh I Eme Aet Atstumas tarp kolonų (vertikaliai): 1420 mm Atstumas tarp kolonų (horizontaliai): 1870 mm Įšūvio tūris: 9662 cm³ Tipas: Horizontalus Pavara: Hidraulinė

Būklė: naudotas, Gamybos metai: 2003, spaudimo jėga: 1 500 kN, Įranga: dokumentacija / vadovas, Liejimo mašina KM 150-700/C2 Užspaudimo blokas 1. Užspaudimo jėga: 1500 kN 2. Plokštelių dydis (h × v): 780 × 790 mm 3. Formos atidarymo eiga: 600 mm 4. Atstumas tarp kolonų (h × v): 500 × 500 mm 5. Minimalus įrankio montavimo aukštis: 300 mm 6. Išstūmiklio eiga: 150 mm 7. Karšto kanalo zonų skaičius: 12 8. Pneumatinių vožtuvų kaiščių valdymas: 1 vnt. Įpurškimo blokas 1. Sraigto skersmuo: 45 mm Gedsyfm Ahspfx Ah Ajit 2. Įpurškimo slėgis: 2336 bar 3. Didžiausias šūvio tūris: 305 cm³ 4. Didžiausias šūvio svoris (PS): 278 g 5. Šerdys: 2× hidraulinė grandinė (BAP) 6. Sraigto ilgis/skersmuo santykis: 22