Ipe Easy Paint 7000 -Sofort Verfügbar - pirkti naudotą (13 302)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The outstanding advantages: Space-saving compact design – comfortable and powerful. Excellent surface quality and a pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture window through air guide plates – suitable for larger workpieces as well. Separation efficiency of overspray up to 99%, pre-filter retention capacity up to 18 kg/m² – resulting in long filter service life! Simple and quick filter replacement from the front. Cost-effective replacement filters. Low acquisition cost and extremely low energy consumption. Dry spray booth made from galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter, and fiberglass filter as secondary filter unit. Ex-proof fan with throttle valve mounted on the left. Do not compromise on surface quality. Easy Paint extraction walls are the ideal, economical solution for effective capture and filtration of paint mist as well as extraction of solvent vapors. Robust and powerful yet economical in use. With the IPE double filtration system, two filter stages ensure a maximum separation efficiency of up to 99%. The cardboard labyrinth filter initially captures significantly more overspray (up to 18 kg/m² of filter area) than conventional filter mats due to its folded filter pockets. The downstream fiberglass secondary filter captures only the finest residual particles. As a guideline, depending on the type of paint used, the cardboard labyrinth filter has a service life of approximately 150 to 200 spraying hours. The fiberglass filter only needs to be replaced after about 900 to 1200 spraying hours, which corresponds to every 5th or 6th cardboard filter change. Easy Paint also features a lower intake opening to quickly and safely capture solvent vapors at floor level or from recessed work pits. Thanks to this additional lower intake, Easy Paint can also be connected to a floor pit or floor tray for sub-floor extraction. The front-insert filter cassette also makes filter changes easy in this configuration. Standard extraction capacity Easy Paint 7000 Article no. 600027 Airflow at standard delivery * 7000 m³/h Primary filter area 3.7 m² Secondary filter area 3.0 m² Motor power 400V/50Hz 2.5 kW ex 2-pole Extraction duct connection D = 355 mm Bodpfx Aodqc U Holwell Width in mm 2845 Total height in mm 1955 Depth in mm with collection window 1015 Weight in kg 180 Location: Available from stock in Bitburg Demo machine at a special price

Būklė: naujas, Gamybos metai: 2026, Type designation and technical data Outstanding advantages: Space-saving compact design – convenient and powerful. Excellent surface quality and a pleasant working environment thanks to diagonal, low-turbulence air flow. Large capture window via air deflection plates – making it suitable for larger workpieces as well. Paint mist separation efficiency up to 99%, pre-filter retention capacity up to 18 kg/m² – resulting in long filter service life! Easy and quick front-side filter change. Low-cost replacement filters. Low acquisition costs and extremely low energy consumption. Dry spray wall made from galvanized sheet steel with welded base frame, cardboard labyrinth pre-filter, and glass fiber post-filter unit. Explosion-proof fan with throttle valve mounted on the left side. Don’t compromise on surface quality. Easy Paint extraction walls are the ideal, cost-effective solution for efficient paint mist capture and filtering, as well as extraction of solvent vapors. Robust and powerful, yet economical in consumption. Bodpfob R D U Sox Alwoll Standard extraction performance Easy Paint 3500 Item No. 600025 Airflow at standard delivery * 3500 m³/h Primary filter area 2.5 m² Secondary filter area 2.0 m² Motor drive output 400V/50Hz 1.1 kW ex Extraction duct connection D = 300 mm Width in mm 2750 Overall height in mm 1455 Depth in mm with capture window 855 Weight in kg 145 Location: Available ex stock Bitburg Exhibition machine at special price

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The outstanding advantages: Space-saving compact design – comfortable and powerful. Excellent surface quality and a pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture window with air guide plates – making it suitable for larger workpieces. Paint mist separation efficiency up to 99%, pre-filter retention capacity up to 18 kg/m² – resulting in long filter service life! Simple and quick front-side filter replacement. Cost-effective replacement filters. Low acquisition costs and extremely low energy consumption. Dry spray wall made from galvanized sheet steel with a welded base frame, cardboard labyrinth filter as the pre-filter, and fiberglass filter as the secondary filter unit. Ex-fan including throttle valve mounted on the left. Don’t compromise on surface quality. Easy Paint extraction walls are the ideal, cost-effective solution for efficient collection and filtration of paint mist as well as extraction of solvent vapors. Robust and powerful yet economical in consumption. The IPE double filtration system ensures that two filter stages achieve a maximum separation efficiency of up to 99%. The cardboard labyrinth filter, with its folded filter pockets, initially collects significantly more overspray (up to 18 kg/m² of filter area) than conventional filter mats. The downstream fiberglass secondary filter captures only the finest remaining particles. As a guideline, depending on the paint used, the cardboard labyrinth filter has a service life of about 150 to 200 painting hours. The fiberglass filter only needs to be replaced after about 900 to 1200 painting hours, meaning it is only due every 5th or 6th change of the cardboard filter. Easy Paint also features a lower intake opening to capture solvent vapors quickly and safely at floor level or from floor pits. Thanks to this additional lower intake opening, the Easy Paint can be connected to a floor pit or sump for underfloor extraction. The front-insertable filter cassette also makes filter changes easier in this configuration. Standard Extraction Capacity Easy Paint 3500 Article No. 600025 Bedscnz Iqspfx Alwsll Airflow (as supplied) * 3500 m³/h Primary filter area 2.5 m² Secondary filter area 2.0 m² Drive motor rating 400V/50Hz 1.1 kW ex Extraction duct connection D = 300 mm Width in mm 2750 Overall height in mm 1455 Depth in mm with capture window 855 Weight in kg 145 Location: Ex stock Bitburg Exhibition machine at a special price

Būklė: naujas, Gamybos metai: 2026, Product Details Crosscut and Mitre Circular Saws Model ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust cast iron construction Precision linear ball bearing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Re-adjustable fixed stops Lower saw blade guard can be connected to dust extraction Machine mounted on a mobile machine base with 1.5 m long roller conveyors on both left and right sides Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2,800 rpm Cutting length 420 mm (at 90°) Bodjcnz Rvjpfx Alwoll Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: Ex stock 54634 Bitburg - Immediately available - Upon request, we are happy to offer you the saw blade as well.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2017, mašinos/transporto priemonės numeris: HMD-G-80-1000, Siūlau iš karto prieinamą, kaip naują Abel stūmoklinę membraninę siurblį, modelis HMD-G-80-1000, ketaus versija, pagaminta 2017 m., ką tik pilnai suremontuota ir naujai nudažyta. Maksimalus našumas 70 m3/val., maksimalus slėgis 15 bar, variklis 30 kW. Komplekte su nauju valdymo skydeliu, dažnio keitikliu ir slėgio davikliu. Ypač tinkama ilgo tipo 1200 ar 1500 kameros filtrų presui. Vietovė: 58762 Altena. Tereikia pastatyti, prijungti ir pradėti naudoti… Bjdpfxjyxxmge Alwjll

Būklė: naudotas, Gamybos metai: 2009, Dažų dengimo įranga Gamintojas: Cefla Modelis: Easy 2000D Pagaminimo metai: 2009 Dažų dengimo linija, sudaryta iš: - Padavimo konvejeris su šviesos barjerais - Dulkių šalinimo šepetėlių įrenginys - Dažymo kabina su dviem automatiniais purškimo rankomis, kurių kiekviena turi po šešias purškimo pistoletus - Plieninė konvejerio juosta, skirta surinkti pertekliui dažams, kurie neprilimpa prie detalių - Automatinis pernešimo konvejeris į džiovinimo kambarį - Trijų kamerų džiovinimo kambarėlis dažytiems gaminiams - Išėjimo konvejeris iš džiovinimo kameros Įskaičiuota: - Šilumos atgavimo įrenginys (rekuperatorius) - Oro nusiurbimo sistema lakiems junginiams - Dulkių nusiurbimo sistema padavimo stalui Bodpfx Aszuzt Eslwsll Pastaba: Techninės specifikacijos ir aprašymai yra to meto užsakymo patvirtinimo kopijos. Informacija pateikiama tik informaciniais tikslais ir nėra įpareigojanti.

Būklė: dilaminuotas dirbtuvėje (naudotas), Rotary Table Polishing Machine, Manufacturer: Bula, Model: MP81 for sale. Continuous rotary machine for polishing, brushing, grinding, and deburring a wide variety of workpieces. 6 workpiece holders mounted on a 250 mm pitch circle. 1 processing station, drive power 2.2 kW, equipped with Bula Quick Lock System for polishing wheels. Polishing spindle diameter: 25 mm. The machine has been completely overhauled: machine body sandblasted, primed, newly painted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled via frequency inverters. Blodolccvmjpfx Alwol Subject to prior sale. Optionally, the system can also be supplied with a liquid polishing compound system, consisting of 1 WIDOBERG HDP-2 high-pressure dosing gun, holder, timer, etc. and pressure tank. WE CAN ALSO OFFER YOU REPAIR OR OVERHAUL OF YOUR EXISTING MACHINE OR A BULA MACHINE YOU HAVE ACQUIRED THROUGH ANOTHER CHANNEL.

Būklė: naujas, Gamybos metai: 2024, Osama Automatic 4-Roller Glue Application Machine Model: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. material passage height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Application roller diameter: 250 mm Motor power: 3 kW Bsdpfxsu I R Uts Alwjll Electrical connection: 400 V / 50 Hz / 3-phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea formaldehyde (UF), and polyurethane adhesives, suitable for various material types such as MDF, multiplex, chipboard, composite panels, and gypsum plasterboards. This type of glue application machine allows precise and homogeneous dosing of adhesive, taking into account the roller profile, which must suit the production requirements. The heavy-duty frame and the core of the rollers—which are manufactured thicker than previous models—allow for a high production rate without special issues, enabling bonding of workpieces up to 2,200 mm in width. Roller removal for maintenance is straightforward due to the support system, which can be split in half via a simple bayonet coupling. The machine can be optionally equipped with various accessories such as an electronic speed controller, automatic roller cleaning device, and automatic upper roller lifting system with digital position display. The S4R/P glue application machine is suitable for various production purposes, including in the construction sector and for manufacturing foam panels and mattresses. Features: - Automatic roller cleaning system - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400 x 3000 mm with PVC rollers, 60 mm diameter, 200 mm spacing - Outfeed table TDF 1400 x 3000 mm, disc rollers, Ø 122 mm, stainless steel Location: Available ex-stock 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2024, Holzkraft Edge Sander Model: KSO 200 F with Veneer Sanding Attachment Sanding unit tiltable up to 45° via lever The machine base, made of welded steel, ensures high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be switched on or off as needed Bodpjlht H Nefx Alwell Graphite-coated platen for longer sanding belt service life Height-adjustable sanding table for full utilization of the belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tensioner automatically compensates for belt length differences Double extraction ports Extendable roller table extension Sanding drum with rubber coating Veneer edge sanding device with contact shoe featuring fine adjustment, support rollers, and stop rulers Grooved infeed ruler for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding Dimensions and Weights Length approx. 1900 mm Width/Depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Extraction port diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Work Table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Min. table height 735 mm Max. table height 965 mm Long table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table min. height 720 mm Cross table max. height 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Supply voltage 400 V Sanding Unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt speed 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Location: In stock at 54634 Bitburg - immediately available -

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, The robust Junior R1 offers all the features required of a modern edge sanding machine. A solid cast iron sanding unit with a powerful motor ensures maximum sanding performance. The height-adjustable worktable, spring-loaded for easy adjustment, allows for optimal belt utilization and safe operation. Optional equipment includes belt oscillation, infinitely variable unit tilting, veneer sanding attachment, and an additional table for sanding work at the deflection roller. The machine is supplied with a set of sanding belts; also included are an angle and mitre guide. Technical specifications: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Belt speed: 22 m/sec. • Table size: 750 × 350 mm • Required space: 1000 × 800 mm • Weight: from 180 kg Bledod R Ev Djpfx Alwsl • Extraction port Ø: 100 mm Location: Ex stock 54634 Bitburg - free loaded - Can be shipped for an additional fee.

Būklė: naujas, Gamybos metai: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tilting: one-sided Drive power: 5.5 kW Rip fence table length: 3.0 m Cutting width: 1350 mm Parallel fence operated by handwheel Standard crosscut table with length stop for miter cuts Analog length stop with continuous fence Bodev Erkajpfx Alwoll Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Rip fence table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel fence operated by handwheel T6660/1-a Standard crosscut table for miter cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Please note: Some images may show options that are not included in the offer.

Būklė: naujas, Gamybos metai: 2025, Formatinė diskinė pjovimo staklės ALTENDORF F 35 tipas 3 - 1000 su įpjovimo agregatu 7,5 kW (10 AG), 3 sukimosi greičiai, Motorizuotas aukščio ir pasvirimo reguliavimas, Didelis apsauginis gaubtas, Dvigubas ritininis vežimėlis 3.200 mm, Įpjovimo agregatas su LED apšvietimu, CNC lygiagretus atmušėjas, pjovimo plotis 1.000 mm, Kampinis-linijinis atmušėjas Digit-L Stalviršio plokštės pailginimas/plitinimas, Su patikrintu CDF paviršiumi ----- Techniniai duomenys ----- Pasvirimo diapazonas: 0 - 46 °, Vežimėlio ilgis: 3.200 mm, Pjovimo ilgis: 3.100 mm, Pjovimo plotis: 1.000 mm, Bodpfx Aexyl Ecjlwoll Pjovimo aukštis: 154 mm, Maks. pjūklo disko Ø: 450 mm, Variklio galia: 7,5 kW, Ekrano dydis: 15 colių, Darbo stalo aukštis: 910 mm, Ištraukimo jungties Ø: 80 + 120 mm Komplektacija: Altendorf F 35 tipas: III - 1000 7,5 kW (10 AG) 3 sukimosi greičiai (M51064) Kampinis-linijinis atmušėjas Digit L (pasirinktinai) (M44154) Vieta: Sandėlyje 54634 Bitburgas - Galima pristatyti iš karto -

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, minimax c 26g TERSA – Multi-function Combination Machine for Sawing, Milling, Planing and Thicknessing. Bedpfxjdqzh To Alwsll The work tables, made from heavily ribbed cast iron, and the welded steel frame ensure torsional rigidity and vibration-free operation. Unique in this performance class: smooth-running, anodised aluminium sliding table with ball contact system. Tilting saw blade from 90° to 45°. Table extension with aluminium crosscut fence for panels and large workpieces. Planer head with TERSA quick-change system with three planer knives. Helically geared steel feed roller ensures consistent workpiece infeed during thicknessing. Adjustable curve milling guard for profiling, standard with fine adjustment. Milling unit with two speeds. Three independent motors for each working unit. Quality made in Europe. Equipment Details Aluminium Sliding Table Proven ball contact system, used millions of times. Dust- and dirt-resistant due to minimal contact point between ball and guide rail. Permanently smooth operation. Saw Unit Adjustment Manual height and tilt adjustment of the saw assembly via star handle. Precise positioning using a scale. TERSA Planer Shaft No more adjustment or screwing needed. Planer knife changes in seconds. Self-locking. Extremely quiet operation. Spindle Moulder The milling unit offers two speeds for flexible use of tooling. The machine includes a finely adjustable curve milling guard for profiling. Tenoning operations can be performed effortlessly using the aluminium sliding table. Thickness Planer The powerful thickness feed allows planing of workpieces up to 200 mm high. The helical feed roller guarantees constant infeed. The jointer table folds space-savingly towards the inside of the machine. Conversion from surface planer to thickness planer takes only a second with a single movement. Surface Planer Standard with TERSA quick-change planing knife system. Large-dimensioned jointer tables. The tables, made of cast iron, ensure ultimate quiet running and freedom from vibration. Saw Unit Saw tiltable up to 45°. With 250 mm Ø saw blade, max. cutting height of 80 mm. The parallel fence enables cutting up to 500 mm width. Table Extension With angle scale and aluminium crosscut fence for mitre cuts on panels and large workpieces. Scope of Delivery: TERSA quick-change planer cutterblock Anodised aluminium sliding table Mitre fence with flip stop Multi-purpose fence for parallel cuts and surface planing Eccentric hold-down clamp Model minimax c 26g TERSA Article No. 5500027 Ripping length 1200 mm Cutting width with parallel fence 500 mm Max. crosscut width left of saw blade 1200 mm Saw blade tilt 90 – 45 degrees Max. cutting height at 90° 80 mm Sliding table length 1140 mm Sliding table width 201 mm Sliding table height 70 mm Saw table length 1024 mm Saw table width 224 mm Saw table height 900 mm Planer shaft type TERSA Planer shaft diameter 62 mm Number of planer knives 3 pcs Jointer table width 260 mm Jointer table length 1040 mm Tilt angle of saw/jointer fence 90/45 degrees Maximum planing depth 3 mm Thickness table length 450 mm Thickness table width 260 mm Minimum working height 3 mm Location: In stock at 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2025, Statybiniai laiptai, tinkantys naudoti kiekvienoje statybvietėje. 2 vnt. sandėlyje, pristatymas iš karto. Vienas asmuo surenka per 15 minučių. Galima sumontuoti du laiptus vieną ant kito. Pusiau pasukti – kairė + dešinė pusė. Bjdpozhhl Isfx Alwell Visus laiptus galima sukrauti ant vienos euro paletės.

Būklė: naujas, Gamybos metai: 2025, Holzkraft Extraction System RLA 210 For wood dust and chips, designed for commercial use Article number: 5132100 Brand: Holzkraft Dimensions and Weights: Chip collection volume: 2 x 165 l Bsdpfxshk Dfre Alwell External nominal diameter extraction port (inlet): 200 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1800 mm Weight approx.: 259 kg Electrical Data: Connection voltage: 400 V Mains frequency: 50 Hz Filter: Filter surface area: 22 m² Noise Emission: Maximum sound pressure level: 72 dB(A) Airflow Rate: Nominal airflow rate: 2262 m³/h Dust tested to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models equipped with collision protection Field of Application: Designed for commercial use Suitable for all woodworking machines with an appropriately sized extraction port High-Quality, Well-Designed Construction: Sturdy and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, enabling flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Delivered fully assembled, ready for immediate use All models mobile On RLA 210 model: Optimal chip distribution in the chip containers due to large filter surface area Filter Description: Ultra-compact design with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and therefore long service life Filter standard with antistatic version, tested and approved to M-BIA category Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp on control box Fan installed downstream of the filter Equipment Details: Fitted with innovative locking mechanism for secure container positioning Location: In stock, 54634 Bitburg - available at short notice -

Būklė: naujas, Gamybos metai: 2026, Panhans Band Saw Machine BSB 800 TECHNICAL DESCRIPTION Solid German engineering Machine frame in a stylish, modern, torsion-resistant, double-chamber steel welded construction Upper and lower doors secured with limit switches Upper and lower precision band saw blade guide APA 2, size 2 Bledsr Igzcepfx Alwel Finely planed grey cast iron table Tilting table plate up to 45° Dynamically balanced band saw wheels with vulcanized rubber tires Rip fence usable to the left of the saw blade, fence profile can be folded down Blade tension indicator 1 saw blade 5775 x 30 x 0.8 mm, tooth spacing 9 mm, No. 3780.301 Mechanical blade guard height adjustment via handwheel with locking ratchet Cam switch with star-delta start and emergency stop button Mechanical motor brake with main switch and motor protection relay CE compliant GS tested Machine frame left-side version Cam switch with star-delta start and emergency stop switch Wheel diameter 800 mm Blade speed 1800 m/min Cutting height 520 mm Cutting width 780 mm Max. blade length 5775 mm Saw blade width min./max. 15 mm / 40 mm Optional with special lining, saw blade width min./max. 10 mm / 35 mm Table size 1145 x 760 mm Table height 930 mm Extraction connection 2 x Ø 120 mm Motor power 4 kW / 5.5 HP Voltage 400 V / 50 Hz Color RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight approx. 525 kg Location: From stock 54634 Bitburg - Available immediately -

Būklė: naujas, Gamybos metai: 2025, Clean Air Dust Extractor RLA 160 Holzkraft For wood dust and chips, designed for commercial use Item number: 5131620 Brand: Holzkraft Chip Collection Volume: 2 x 165 l Outside Diameter of Extraction Port (Inlet): 160 mm Length approx.: 1,755 mm Width/Depth approx.: 830 mm Height approx.: 1,654 mm Weight approx.: 260 kg Electrical Data Connection Voltage: 400 V Mains Frequency: 50 Hz Filter Filter Area: 9.21 m² Noise Emission Max. Sound Pressure Level: 73 dB(A) Airflow Rated Airflow: 1,448 m³/h Dust Class: H3 Scope of Delivery: Metal Impeller Fan Bljdpfehkzttjx Alwjl Inspection Opening for Cleaning the Bypass Filter 5 m Connection Cable with 5-pin CEE Plug and Phase Reverser Two Fixed and Two Swivel Castors with Locking Brakes Manual Filter Cleaning Item No. 5131620 Location: ex stock 54634 Bitburg - Available immediately -

Būklė: naujas, Gamybos metai: 2024, Surface Planer Martin T 54 Only with a high-quality surface planer can you truly achieve perfect foundations. The T 54 was developed with precisely this aim in mind. It enables you to dress workpieces easily at the most modern level and safely machine them with four-sided edges. The machine comes standard with a TERSA all-steel cutterblock. The Xplane cutterblock with a pulling cut is available as an optional extra. Chamfering is effortless thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The solid cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require more support area, both the infeed and outfeed tables can each be extended by 380 mm – of course, these extensions are also made of cast iron. Technical data: Table width: 500 mm Table length: 2840 mm Max. cutting depth: 8 mm Cutterblock: Diameter 125 mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5.5 kW Bljdopgkmwopfx Alwol Fence adjustable up to 45° Auxiliary fence for small workpieces Motorised table adjustment Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa cutterblock 4 knives Location: In stock at 54634 Bitburg - Available immediately -

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with XPLANE Cutterhead The T45 thickness planer provides ideal prerequisites for modern production: It delivers superbly planed surfaces, is quick and simple to operate, and also runs exceptionally quietly. The standard electronic control allows you to store up to 99 planing heights, making setting the planing height so easy that the first workpiece already fits perfectly. Of course, the thickness table can be adjusted with a simple push of a button or incrementally in 0.1 mm steps. The controls for feed adjustment are conveniently positioned within easy reach. The heavy, vibration-damping composite frame combined with the high-quality cutterhead bearings guarantee outstanding surface finishes. Thanks to its sound-absorbing design, quiet operation is standard even in the basic version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm Bjdpfx Alsqlck Njwjll • Speed: 5,000 rpm • Controls: Single-axis control for planing height, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; buttons for manual rapid and fine adjustment of thickness via digital display, pushbuttons for cutterhead start and stop, integrated operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 spiral knife rows (33 convex carbide knives per row), supplied with full knife set and one T-key Torx T20; spindle speed 6,000 rpm included; The emission sound pressure level LpA during operation is reduced by 10 dB(A). • Thickness table: Electronic adjustment with fine setting, travel speed 10 mm/s, supported by 4 anti-tilt spindles, finely planed table surface • Infeed: 2 speeds, 6 / 12 m/min, electronically selectable even during planing; large rubber feed rollers Ø 85 mm for compensating variable timber thickness, gentle and self-cleaning rubber rollers, simple roller swap; sectional pressure bar at infeed • Extraction: Highly pivotable divided extraction hood with 160 mm chip extraction port, can be connected left/right (both sides possible in special cases); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 knife change tool 1 pair of dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workstation LpA acc. to DIN EN ISO 11202 [dB(A)] No-load noise (no extraction) P1 65 No-load noise (with extraction) P1 77 Working noise (no extraction) P2 65 Working noise (with extraction) P2 78 Sound power level LWA acc. to DIN EN ISO 3746 [dB(A)] No-load noise (no extraction) 84 Working noise (with extraction) 90 Dust emission: Low-dust operation according to DGUV 209-044 / BGI 739-1 Location: ex-stock 54634 Bitburg - immediately available -

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, - NEW - Make: Ganner Gannomat Bsdpfjdwi Rkox Alwsll Model: SELEKTA 253 220 V, 1 Ph, 50 Hz Complete in standard configuration with: - Fully automatic electronic control system with program selection switch: FLUSHING – GLUING – GLUING/DRIVING-IN - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of dowel feed rate - Automatic dowel diameter and dowel length monitoring with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed glue system with 6 bar glue pressure via glue nozzle, suitable for glues with a viscosity of 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer, controlled by timer through the electronic control system - Selector switch GLUE/WATER for flushing/cleaning the glue system, with EasyClean function key (automatic cleaning program for the glue hose and glue nozzle via spray funnel and wastewater collection container) - Control lamp for remaining glue indicator in the glue container - 1 stainless steel container for 5 kg glue and 1 stainless steel container for 5 l water for flushing/cleaning - 4 casters for moving the machine Including 1 gun for dowels Ø 8 mm, dowel length 25 - 40 mm, driving-in depth 7 - 20 mm Air connection: 6 bar Price ex stock 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2023, lazerio galia: 8 000 W, Fiber laser machine HLF available from stock, ready for prompt delivery. An identical machine is powered up and available for testing at our facility. Specifications: - Power: 8kW Bodpfsqgcwtjx Alwsll - Sheet size: 3000 x 1500mm - Automatic shuttle table with ball rollers for scratch-free workpiece positioning - Siemens touchscreen control with LAN/USB - Siemens drives - Precitec autofocus Procutter cutting head - Sheet metal measurement - IPG resonator with 8kW / alternatively MAX Photonics - Small parts conveyor belt Includes: - Warranty - CAD / CAM software - Commissioning - Delivery (within Germany) - Donaldson extraction unit - Training offered This is a stock machine and therefore available at short notice. We have 300+ similar and identical machines powered up across Germany and Europe. Reference visits to existing users are always possible. Call us today!

Būklė: naujas, Gamybos metai: 2024, Panhans Tilting Spindle Moulder Type: 245/20 Solid German engineering Table-mounted moulder with single-sided, fixed spindle for tilting range from -5° to +45.5° Positioning control for spindle height and tilt adjustment, including zero reset for height and offset travel Electronic position and speed displays 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-action belt tensioning device Push-buttons for spindle start and stop Left and right rotation Quick-release spindle clamp Finely planed grey cast iron table with fixed frame support Control panel mounted below on fixed frame support Fence 216 with total adjustment via handwheel and LCD display, including cast iron fence plates and aluminium chip breakers Integrated machine socket Lockable main switch Mechanical motor brake Moulder guard and pressure device GAMMA V 1629 Curve milling fence 1639 Tapoa Milling spindle 30 mm, non-interchangeable CE compliant GS certified Table size 1100 x 760 mm Table height 870 mm Spindle: Non-interchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Extraction ports 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 Light grey and RAL 5000 Violet blue Net weight approx. 800 kg Equipment: Upper control panel Tilting ±45 degrees 7.5 kW motor Centrex Bodpsr Ig H Tjfx Alwell Extendable frame support Location: ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2025, Motorized thickness table lift with two speeds Digital display for working height Thickness table made of cast iron The thickness table is mounted on four large trapezoidal-threaded spindles for maximum stability and precision Four feed speeds Optional: Two rollers in the thickness table Standard noise and chip protection curtains at the infeed and outfeed Adjustable roller pressure Front feed roller with helical toothing Outfeed roller with rubber coating Powerful industrial motor Equipment details Models TERSA with Tersa cutterhead Knife change in seconds When the machine starts, centrifugal force automatically tensions the knives – self-locking The knife projection is set automatically without the need for setting gauges Work table The work table is mounted on four large trapezoidal-threaded spindles, ensuring maximum stability under all working conditions Standard with electric table adjustment Due to the special lifting mechanism, the table position is perfectly maintained even without locking Helically toothed steel infeed rollers ensure constant and uniform wood feed Second, rubber-coated feed roller at outfeed Massive anti-kickback devices prevent workpiece kickback A 4-knife cutterblock ensures optimal planing results Dimensions and weight Length approx. 1305 mm Width/depth approx. 1080 mm Weight approx. 750 kg Extraction connection Extraction port diameter thicknessing: 150 mm Drive power Main motor: 9 kW Installation information Space requirement length: 1305 mm Space requirement width/depth: 1080 mm Bsdpfx Ajff Efaslwoll Space requirement height: 1197 mm Explanation space requirement: Dimensions include maximum traversing paths or usable lengths. Machine body length: 1305 mm Machine body width/depth: 725 mm Length: 1000 mm Width: 2000 mm Explanation working area: Please add the stated dimensions to the space requirement in order to get the recommended free setup area for the machine. Thicknessing Thickness table length: 630 mm Thickness table width: 1000 mm Min. working height: 3.5 mm Max. working height: 300 mm Min. working length: 210 mm Max. cutting depth: 8 mm Electrical data Connecting voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 4500 rpm Max. planing width: 630 mm Feed Speed: 5/8/12/18 m/min Location: In stock 54634 Bitburg - immediately available -

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2026, veikimo valandos: 1 h, Super special price, as it was operated during our in-house exhibition. Operating hours: 1 Immediately available – subject to prior sale Once it’s gone, it’s gone. Compact design, high reliability, and excellent price-performance ratio: these are the advantages of this machine, which is ideal for briquetting materials such as wood, polystyrene, foam, or paper. Special Feature: The screw pre-compaction guarantees high briquette quality. For rapid and straightforward installation, the C 140 is mounted on a sturdy base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput capacity (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Bjdpstnz Ttjfx Alwjll Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compactor with end-position damped cylinder and bolted cover Control cabinet with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and geared motor Screw channel with discharge screw and geared motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Būklė: naujas, Gamybos metai: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure your workpieces are optimally prepared for edge banding. The standard configuration includes a jointing unit (up to 2 mm milling depth), top-mounted quick-heating glue pot, end trim saw, and combination milling unit. Optionally, the F 2 can also be fitted with a flat scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Bljdpfxelht Hze Alwjl Ready for operation in 3.5 minutes Features: F2 - 10 m/min F2 Next Edgebander With PLC control (including touchscreen) and automatic glue application on the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change setup and glue discharge unit, high-frequency end trimming station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic height adjustment and interchangeable insert router (combination version), robust chain feed, ball-bearing double roller top pressure, inspection window at the back of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush trimming)