Heesemann Jsm Rc Advanced Plataus Juostos Šlifavimo Staklės pirkti naudotą (60 095)

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 1 350 mm, The JSM is an affordable all-round machine for small and medium-sized craft businesses with high demands on surface quality. It is available in two sanding widths and three equipment packages. Depending on the package, it is ideally suited for solid wood, veneer, and lacquer sanding. - Sanding width: 1,100 or 1,350 mm - Conveyor unit with profiled conveyor belt - Feed speeds: 3–12 m/min Klsdpewz Ignsfx Afnsu - Variable working height via motorized height adjustment (maximum table height 880 mm) - Workpiece thickness: 3–160 mm - Pressure roller (Ø 50 mm) - Table extension with non-driven rollers at machine infeed and outfeed (each 300 mm) - 15.6" touch display (integrated) - CSD pressure beam system (magnetic pressure beam) - Remote maintenance program - Sanding belt length 2,150 mm, sanding belt width 1,120/1,370 mm - Energy Management System EMS for energy-efficient operation - 1 emergency stop switch at the terminal, 2 emergency stop switches at the machine outfeed - LED lighting inside the machine (on belt support side) - Terminal and belt support side on the left - Electrical configuration: 400 V, 50 Hz Advanced Package additional features: - Vacuum table with pre-drilled holes for vacuum blower connection - Vacuum blower integrated in the machine - Workpiece cleaning with oscillating air nozzle - CSD pressure beam system (magnetic pressure beam) replacing the ACP system - Oscillating sanding belt cleaning - Belt Manager software

Būklė: naudotas, Gamybos metai: 1997, Used machine Year of manufacture: 1997 1 Belt sanding machine with combination unit featuring an electronic segmented pressure bar for sanding softwood and hardwood veneers Calibrating and fine sanding of solid wood Calibrating workpiece carrier panels Sanding of defective veneers and coatings Intermediate sanding of PU, water-based, UV, nitrocellulose, and polyester lacquers Sanding of barrier foils with graphical operating terminal NC-controlled thickness adjustment from 3-150 mm Calibration roller activation via terminal with patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Sanding width: 1100 mm Abrasive belt length: 2150 mm Abrasive belt speed, frequency-controlled: approx. 2-18 m/sec Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Klodsyulfmspfx Afneu Compressed air consumption: 15 NL/min Belt oscillation: 490 l/min Extraction socket: 180 mm Air requirement for sanding unit: 1800 m³/h Required air speed: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2000 kg Dimensions (W x D x H): 1840 x 1670 x 2200 mm Availability: short-term Location: Röllbach

Būklė: naudotas, Gamybos metai: 1995, Pastovi mašina - kombinuota stotis, dulkių šepetys - storio matavimo įrenginys - elektroninis atskiros grandies šlifavimo batelis MCS sistema Weber 32 mm - grioveliais pažymėtas plieninis kalibravimo volas - juostos nupūtimas - vakuuminis kilimas Šlifavimo plotis: 1100 mm Pavara: 15 kW Padvės pavaros galia apie 1,1 kW Aukščio reguliavimas 0,25 kW Šlifavimo juostos matmenys: 1150 x 2500 mm Didžiausias ruošinio storis: 150 mm Mašinos plotis: 1700 mm Mašinos ilgis: 2000 mm Mašinos aukštis: 2160 + 150 mm Mašinos svoris: 1900 kg Darbinis aukštis pastovus: 850 mm Ištraukimo jungtis: juosta 180 mm / šepetys 120 mm Siurbiamo oro kiekis: 0,74 m³/s Prisijungimo galia: 23 kW Suspausto oro reikalingumas: 7 bar Padvės greitis: 3-15 m/min. Darbo valandos: 7000 h Sandėlio vieta: Nattheim Kedpfox Twcpex Afnelu

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Wide-Belt Sander SAC 1000 CLS/S – Ready for Operation Specification: • Condition – used, after comprehensive inspection • Manufacturer – SAC • Model – CLS/S • Working width – 1000 mm • Maximum working height – 160 mm • 1 sanding unit – hard rubber roller • Main motor power – 11 kW • 2 feed speeds Kedey R Evropfx Afnolu • Table with pneumatic cylinders – ideal for calibration • Electronic thickness gauge for workpiece measurement • Oscillation with pneumatic pad • Abrasive belt size – 1030x1900 mm • Weight approx. 1300 kg • Overall dimensions: 150 x 222 x 187 cm (L x W x H) Additional Information: • The machine is in excellent technical condition and ready for immediate use • Presented photos reflect the actual condition of the item for sale • Possibility to power on and test the machine on site • Free machine operation training (at company headquarters) • Listed price does not include VAT or transport costs Financing & Transport: • We arrange transport via MDD fleet, courier companies, or external carriers • Financial support available in the form of leasing or lease loan

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, Working width: 1300 mm Workpiece height - max.: 3 - 140 mm Control system: Xinje XD5 Partial taper length - min./max.: 200 - mm Kodpfx Asylp A Defnelu Total power requirement: 13.4 kW Machine weight: approx. 4.5 t Space requirements: approx. 5.1 x 2 x 2.3 m This brush sanding machine is in very good condition, immediately available, and can be inspected under power at the seller’s premises. DESCRIPTION: - Minimum part length: 200 mm - The machine is designed for sanding flat single parts for kitchen cabinets, windows, doors, furniture, etc. - Modular control of individual unit modules to meet customer requirements. - Frequency inverter for speed control of the motors in each module. - Each unit can be easily pulled out for maintenance and for changing the sanding paper and brushes. - Electrically adjustable working height from 3-140 mm via control system - Oscillating compressed air at the exit area Miscellaneous: - Ball bearings, drive belts, and brush drive chains were replaced in June 2025

Būklė: naudotas, Gamybos metai: 2018, bendras plotis: 1 800 mm, bendras aukštis: 2 200 mm, bendras ilgis: 1 900 mm, Color: Grey Unladen weight: 1,500 kg Wide Belt Sander Boere Sandrit 1100C 380V Maximum sanding width: 1100 mm Kjdpfx Afsyz U Dmenelu Maximum sanding height: 150 mm Sanding unit: COMBI Motor: 11 kW (15 HP) Transport dimensions: 1800 x 1300 x 2100 mm (L x W x H), weight 1850 kg - Year of manufacture: 2018 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 18.03.7507 - Number of units [pcs]: 1 - Unit 1: - Position: Top - Unit type: Sanding pad - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1100 - Roller diameter [mm]: 150 - Roller material: Rubber - Motor power [kW]: 15 - Max. working width [mm]: 1100 - Min. working height [mm]: 3 - Max. working height [mm]: 152 - Feed motor [kW]: 0.55 - Feed speed: Manual - Min. feed speed [m/min]: 2.5 - Max. feed speed [m/min]: 8 - Feed speed control: Infinitely variable - Voltage [V]: 400 - Power consumption [A]: 28 - Fuse [A]: 32 - Power output [kW]: 15.6 - Transport dimensions: 1900 mm x 1800 mm x 2200 mm (L x W x H) - Transport weight [kg]: 1500 kg - Number of transport packages [pcs]: 1 Financial Information VAT: The quoted price is subject to VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial sector equipment Yorick Diebels

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 100 mm, šlifavimo plotis: 1 100 mm, šlifavimo aukštis: 150 mm, įvesties srovės tipas: trifazis, – Pagaminta Vokietijoje – Bateliai su pneumatiniu prispaudimu Ksdpfxsyyv Auj Afnslu TECHNINIAI PARAMETRAI: – Šlifavimo plotis: 1100 mm – Maks. šlifavimo aukštis: 150 mm – Min. ruošinio ilgis: 600 mm – Variklių galia: 2 x 15 kW – Abu agregatai su bateliais – Pneumatiniai bateliai su prispaudimu – Batelių spaudimo reguliavimas – Guminiai volai: 70 shor'e – Pneumatinė osciliacija – Valymo šepetys – Pagalbiniai stalai su voleliais – Sklandžiai reguliuojamas padavimas – Padavimo greitis: 4-13 m/min – Antgalių skersmuo: 3 x 200 mm – Įrenginio matmenys (ilgis/plotis/aukštis): 250 x 200 x 210 cm – Svoris: ~ 2500 kg

Gamybos metai: 2009, būklė: labai geros būklės (naudotas), I am selling a wide belt sander RWT BS950RP, year of manufacture 2009. Configuration: - Hard rubber sanding drum - Combination unit: soft rubber drum + pneumatic shoe with jump-in/out function - Working width: 950 mm - Electronic height adjustment with digital display: 3-160 mm - 1 motor: 11 kW - 2 feed speeds - Programming of shoe jump-in/out - Sensitive adjustment of shoe position - Sensitive adjustment of drum position Kledpoiuc Sgofx Afnou - Pneumatic setting of shoe and drum pressure - Pressure rollers for short elements Condition: LIKE NEW! The machine has had very little use. Available immediately.

Būklė: naudotas, Wide-Belt Sander SBF SATEFANI 2W126 - Machine in stock - Refurbished - Very good condition TECHNICAL DATA: - Maximum sanding width: 1100 mm - Maximum workpiece height: 160 mm - Minimum sanding thickness: 3 mm - Main motors: 2 x 11 kW - Feed motor: 2.2 kW - Height adjustment motor: 0.37 kW - 1 rubber roller, 65 Shore hardness, diameter 270 mm - 2 rubber rollers, 45 Shore hardness, diameter 400 mm - Two feed speed settings Klsdpfx Afocvwf Tensu - Pneumatic oscillation with limit switches - Dust extraction ports: 2 x 150 mm diameter - Sanding belt in very good condition Machine dimensions: - Length: 280 cm - Width: 180 cm - Height: 250 cm - Weight: approx. 3000 kg

Būklė: naudotas, Plati kalibravimo juostinis šlifuoklis Ksdpfx Afex N T Efsnjlu Gamintojas: Viet Spa Italia Modelis: PL ICCC Metai: 1995 Galia: 54 kW Oro slėgis: 5–8 bar Svoris: 6200 kg

Būklė: naudotas, Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 950 mm, šlifavimo plotis: 950 mm, - Austrijos gamyba - pagaminimo metai: 2009 - kombinuota šlifavimo padas TECHNINIAI PARAMETRAI: - šlifavimo plotis: 950 mm - šlifavimo aukštis: 4-170 mm - variklio galia: 11 kW Ksdpfx Aexlr U Ijfnelu - 1 agregatas: guminis velenas su pneumatiniais prispaudėjais - veleno skersmuo: 110 mm - 2 agregatas: kombinuotas padas - valymo šepetys: 1,1 kW - guminio veleno pneumatinis prispaudimas - padas su pneumatiniu prispaudimu - pneumatine osciliacija - oro pūtimas ant juostos - elektrinis aukščio reguliavimas - šlifavimo juostų greitis reguliuojamas dažnio keitikliu - elektroninė šlifavimo aukščio pozicionavimo sistema - dvi padavimo greičiai: padavimo variklio galia 0,55 kW - minimali medžiagos ilgis: 400 mm - jungčių skersmuo: 3 x 130 mm ir 2 x 80 mm - įrenginio matmenys (ilgis/plotis/aukštis): 170 x 150 x 210 cm - svoris: ~ 800 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, I am selling a wide belt sander SCM Sandya 16 S 110, year of manufacture 2012. Configuration: - 18.5 kW hard rubber sanding roller - 15 kW hard rubber sanding roller Kljdpfx Ajihfawsfnsu - 11 kW combination unit with soft rubber roller and pneumatic shoe - Working width: 1100 mm - Feed rollers for short workpieces - Compressed air cleaning for all units - Total weight: 2750 kg - 3 motors: 18.5 + 15 + 11 kW - Complete documentation included Condition: LIKE NEW! The machine has seen very little use. Available immediately.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Plataus juostos šlifuoklis SCM Sandya 900R Specifikacija: • Būklė – naudotas, atlikta pilna techninė apžiūra • Gamintojas – SCM • Modelis – Sandya 900 R • Darbinis plotis – 900 mm • Didžiausias darbinis aukštis – 150 mm • 1 šlifavimo agregatas – kietos gumos velenas, 300 mm skersmens, 90° Shore A (ShA) kietumo • Pagrindinis variklis – 11 kW galingumas • 2 transporterio darbo greičiai • Plūduriuojantis stalas su pneumatiniais cilindrais – idealiai tinka kalibracijai • Analoginis šlifuojamo elemento storio indikatorius • Pneumatinio kūjo osciliacija • Pailginamos stalo ritinėlių sekcijos • Šlifavimo juostos dydis – 900x2100 mm • Ištraukimo pajungimas – 150 mm • Svoris apie 1 200 kg • Išoriniai matmenys: 176 x 150 x 205 cm (ilgis x plotis x aukštis) Papildoma informacija: • Įrenginys paruoštas naudojimui iš karto • Nuotraukos atitinka faktinę parduodamo daikto būklę • Galimybė patikrinti ir įjungti įrenginį vietoje • Nemokami operatoriaus mokymai (įmonės būstinėje) • Aukciono kaina nurodyta be PVM ir transportavimo išlaidų Finansavimas ir transportas: Kledpezd Tfxefx Afnsu • Organizuoja transportą MDD autoparku, kurjerių ar išorinių vežėjų pagalba • Siūlome finansavimo galimybes – lizingas arba lizingo paskola

Būklė: naujas, Typ R-RP1300 Arbeitsbreite: 1300 mm Mindestarbeitlänge: 500 mm Arbeitshöhe/-dicke: 3–200 mm Vorschubgeschwindigkeit: 0–30 m/min Gesamtmotorleistung: 30,37 kW Motorleistung erstes Aggregat: 15 kW Motorleistung zweites Aggregat: 11 kW Bürstenmotor zur Staubreinigung: 0,37 kW Vorschubmotor: 4 kW Hubmotor: 0,37 kW Durchmesser erster Walze: 240 mm Durchmesser zweiter Walze: 210 mm Schleifbandabmessung: 1330 x 2200 mm Kedsdflqajpfx Afnelu Arbeitsluftdruck: 0,6 MPa Absaugleistung: 9.600 m³/h Transportabmessungen (LxBxH): 2.700 x 2.100 x 2.400 mm Gewicht: 3.300 kg

Būklė: naudotas, Gamybos metai: 1994, maks. pravažiavimo aukštis: 160 mm, šlifavimo juostos ilgis 1 agregato: 1900 mm, maks. darbo plotis: 1350 mm, juostų skaičius: 2, 1 agregato: kalibravimo volas su grioveliais, guminis. 1 agregato tipas: grioveliuotas plienas. Šlifavimo juostos plotis 1 agregate: 1350 mm. 2 agregatas: kombinuotas šlifavimo agregatas. 2 agregato tipas: volas/bata. Valdymas: rankinis pultas. Elektros/pneumat. juostos osciliacija: pneumatinė. Įleidimo aukštis: fiksuotas (judama viršutinė dalis). Stalo pakėlimas: elektra varomas. Stalo indikatorius: mechaninis skaitmeninis rodmuo. Darbo aukštis arba padavimo stalo aukštis: 900 mm Kljdpfoy Naq Uox Afnsu Sandėliavimo vieta: Nattheim

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 350 mm, Costa kalibravimo staklės su dviem šlifavimo juostomis ir velenėliu su peiliais frezavimui Kljdpfxewmxh To Afnou

Gamybos metai: 2008, būklė: labai geros būklės (naudotas), I am selling a heavy-duty wide belt sander SGJ 1300R-RP. Year of manufacture: 2008 Configuration: Steel drum / 37 kW motor Rubber sanding drum with shoe / 22 kW motor Cleaning unit with extraction hood Feed speed with variable adjustment Pressure shoes for short elements on each unit. Infeed and outfeed tables for long elements. Working height: 3–150 mm Working width: 1300 mm Kjdpfx Afskd Am Eenolu Total power: 64 kW Total weight: 4000 kg Condition: Very good! Available immediately.

Gamybos metai: 1977, būklė: labai geros būklės (naudotas), I am selling a Butfering FBS2 1100 bottom wide belt sander, year of manufacture 1977. Configuration: pad – pad. Working width: 1100 mm. Total weight: 4000 kg. Suitable for production line operation. Design features a fixed working table height. Klsdpedv N R Usfx Afneu

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, Darbinis plotis 910 mm Viršutinis kombinuotas agregatas Apatinis kombinuotas agregatas du padavimo greičiai diržo osciliacija elektroninis medžiagos storio nustatymas medžiagos matuoklis Stalas su vakuumine pompa antrajame agregate Pagaminimo metai: 2009 Klodpfxoxt Dz As Afnju Nauji transportavimo kilimėliai sumontuoti 2023 m.

Būklė: naudotas, Gamybos metai: 1998, Used machine Year of manufacture: 1998 1 Wide Belt Sander with Combination Unit Equipped with electronic segmented pressure beam For sanding soft and hard veneers Calibrating and fine sanding of solid wood Kjdpfox Rpghjx Afnolu Calibrating carrier boards Sanding defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitrocellulose, and polyester finishes Sanding isolation foils With graphical control terminal NC-controlled thickness adjustment from 3 to 150 mm Calibration roller can be activated via terminal With patented CSD segmented pressure beam for compensation of workpiece tolerances up to 2 mm Sanding width: 1350 mm Sanding belt length: 2150 mm Sanding belt speed, frequency-controlled: approx. 2–18 m/sec Main sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air demand: 15 NL/min Belt blow-off: 490 l/min Extraction port: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2500 kg Dimensions (W x D x H): 2090 x 1670 x 2020 mm Machine will be fitted with a new feed belt Availability: by arrangement Location: Röllbach

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 1 300 mm, šlifavimo aukštis: 160 mm, aukščio reguliavimo tipas: elektrinis, šlifavimo juostos ilgis: 2 150 mm, Heesemann JSM 1350 RC Wide Belt Sander Year of manufacture: 2025, new machine, currently the only show machine in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Infinitely variable feed speed: 3 - 12 m/min - Sanding units with separate motors and infinitely variable belt speed up to 18 m/s - Infeed and outfeed table extensions - 15.6" industrial PC - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Front calibration deflection roller Ø 160 mm, rubber-coated (65° Shore hardness), grooved - Energy Management System EMS - Doors with glass inserts - LED lighting inside the machine - Vacuum table prepared (drilled) for blower connection Kljdpfx Afowcqr Ajnsu - Vacuum blower (integrated in the machine) - Workpiece cleaning with oscillating air blast nozzle - CSD (magnetic pressure beam) The machine is connected and can be inspected on site by appointment. If you have any questions, please do not hesitate to contact us.

Būklė: geras (naudotas), Gamybos metai: 2002, Marke: MABO Typ: Participate Maschinennummer: 76 Baujahr: 2002 - Langbandschleifmaschine mit elektrischer Höhenverstellung des Arbeitstisches, Schleifschuh Kjdpfx Aopitqmofnjlu Technische Daten: Arbeitstisch: 2000 x 800 mm Schleifbandabmessung: 6060 x 150 mm 2 Geschwindigkeiten beim Schleifband Transportmaße: Länge: 320 cm Breite: 130 cm Höhe: 160 cm Lager-Nr.: 2001159BXM

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1981, Funkcionalumas: visiškai funkcionalus, Marke: DMC Modell: Europa 90 Baujahr: 1981 Technische Daten: Rollenschleifband-Motor: 15 PS – 2-polig Polster-Schleifband-Motor: 7,5 PS – 2-polig Transportband-Motor: 1,5/0,8 PS – 4/8-polig Zwei Vorschubgeschwindigkeiten: 7–14 m/min Geschwindigkeit Rollenschleifband: 21 m/s Geschwindigkeit Polster-Schleifband: 10 m/s Rollen- und Polster-Schleifbandlänge: 2200 mm Rollen- und Polster-Schleifbandbreite: 950 mm Max. Werkstückgröße: 900 x ≠100 x >200 mm Min. Werkstückgröße: 40 x ≠2 x 200 mm Min. Betriebsdruck: 5,5 bar Druckluftverbrauch: 300 l/min Absaughauben-Durchmesser (Rollenband): 200 mm Absaughauben-Durchmesser (Polsterband): 200 mm Mittlere Absauggeschwindigkeit: 25–30 m/s Abluftvolumen (Rollenband-Haube): 3150 m³/h Abluftvolumen (Polsterband-Haube): 3150 m³/h Abmessungen (LxBxH): 1675 x 1625 x 2096 mm Gewicht: 2030 kg Gewicht der Maschine ohne Polster: 1630 kg Kjdpfx Aorbyrpsfnslu Lager-Nr.: 2001933

Būklė: naudotas, Šlifavimo agregatų skaičius: 4 vnt. Šlifavimo plotis: 1 300 mm Maks. šlifavimo aukštis: apie 140 mm Dažnio valdymo universali plokščių šlifavimo automatika arba 2 juostų kryžminio šlifavimo automatas Heesemann MFA 8 plokštinių medienos medžiagų ir/arba dažytų ruošinių (tarpinės lako šlifavimas) šlifavimui su vakuuminiu kilimu ir dideliu kiekiu šlifavimo juostų. Kjdpfx Afexr N I Eonslu 1 agregatas: Elektroninė spaudimo juosta 2 agregatas: Skersinis šlifavimas 3 agregatas: Išilginis šlifavimas 4 agregatas: Valymo šepetys

Būklė: naudotas, Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 1 350 mm, šlifavimo aukštis: 150 mm, darbinio aukščio: 150 mm, aukščio reguliavimo tipas: elektrinis, ruošinio aukštis (maks.): 150 mm, - Condition: very good - Year of manufacture: 1993 - Electronic PLC control: Heesemann - Model / Type: LSM 6 TECHNICAL SPECIFICATIONS: - Working sanding width: 1350 mm - Max. thickness of sanded workpieces: 150 mm MACHINE CONFIGURATION: I - Cross-unit aggregate with electronic sequential pressure - Main motor: 13 kW - Pneumatic photocell oscillation - Extraction outlet: 1 x 180 mm - Sanding belt size: 5480 x 150 mm II - Combination unit with pad - Main motor: 13 kW - Belt cleaning system with oscillation - Pneumatic pressure pad - Pneumatic photocell oscillation Ksdjw H Sk Topfx Afnjlu - Extraction outlet: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm - PNEUMATIC PHOTOCELL OSCILLATION - Pneumatic cleaning strip system with oscillation for cleaning belts III - Combination unit with pad - Main motor: 13 kW - Belt cleaning system - Pneumatic pressure pad - Extraction outlet: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm IV - Brush cleaning unit, located after main aggregate at outfeed - Motor: 1.1 kW - Extraction outlet: 1 x 140 mm - Feed adjustable by gear motor: 4 kW motor - Feed speed: 6 – 26 m/min - Air requirement: approx. 28 m/sec, 4340 m3/h - Compressed air consumption: approx. 800 l/min - Feed belt: 5-segment - Pneumatic feed belt cleaning system - Automatic sanding height adjustment with electronic display - Motor: 0.55 kW - Suitable for lacquer sanding and intermediate lacquer sanding - Dimensions (L/W/H): 3750 x 3230 x 2300 mm - Weight: approx. 8000 kg