Plataus juostos šlifavimo staklės Felder FW 952

Felder FW 952

Sąlyga: labai geros būklės (naudotas), Wide Belt Sander for Calibration and Fine Finishing Manufacturer: SCM Model: RCS 1st Unit: Calibrating Roller, Steel 2nd Unit: Combination Unit (Roller 60 Sh, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 emergency stops Table extension with 2 rollers, front and rear Sanding pad inserts covered with new graphite cloth Including nearly new sanding belts All documentation included Note – Used Machines: Duodpfxjxqggco Ab Sol • Technical data and prior sale subject to change. • Prices quoted are ex location – loaded free on truck! • The machine has been cleaned and tested for functionality. • All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Sąlyga: naujas, Velenų skaičius: 6 vnt. Darbinis plotis: 250 mm Obliavimo aukštis: 150 mm Lyginimo stalo ilgis: 2500 mm Padavimo variklis: 4 kW Padavimo greitis: 6–24 m/min. Svoris: 4770 kg Matmenys (Ilgis/Plotis/Aukštis): 4722x1860x1776 mm Keturių pusių obliavimo staklės Kuper SWT XL-6, langų versija su elektroniniu ašių bei radialiniu velenų reguliavimu. Tvirta, nedeformuojama ir žemo vibracijos lygio staklių bazė. Velenų skaičius: 6 Dsdpfx Ajvnv Ubeb Sjul Darbinis plotis: 250 mm Darbinis aukštis: 150 mm Lyginimo stalo ilgis: 2500 mm Veleno apsukos: dažnio valdomos 4000–8000 aps./min. Padavimo greitis: 6–24 m/min Išsamesnį aprašymą rasite pridėtame PDF faile! (Techniniai duomenys pagal gamintoją – be garantijos!)

Sąlyga: naujas, Technical specifications: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit Djdpfx Abog A D Anj Soul 2 combination sanding units with pneumatic pad Pneumatically actuated sanding pad Abrasive belt size: 970 x 2150 mm Total motor power for both sanding units: 11 kW Feed belt speed with inverter: 16-18 m/sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding shoe width: 50 mm Sanding belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: ECO GEAR SYSTEM – mechanical sanding belt oscillation system without compressed air Infinitely variable feed belt speed via inverter 4-20 m/min Automatic star/delta start-up Steel roller on first unit; rubber-coated roller on COMBI unit Electronic table height display Automatic thickness reading device and table positioning Safety switches Automatic machine cut-offs Main motor brake Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Gamybos metai: 2001, Sąlyga: labai geros būklės (naudotas), For sale: Costa A1 ACT 1150 bottom sander, year 2001. Configuration: soft roller with electronic segmented pad. Working width: 1150 mm Abrasive belts: 1180 x 2620 mm Pressure rollers for short workpieces. Duedpfx Asgq U R Nob Ssl Vacuum fan included. Air blast on both units. Total weight: 2500 kg Two motors: 7.5 kW and 15 kW Total power: 27 kW Very good condition, regularly serviced machine. Available immediately.

Sąlyga: geras (naudotas), Gamybos metai: 1991, veikimo valandos: 678 h, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 100 mm, šlifavimo plotis: 1 100 mm, bendras svoris: 2 000 kg, šlifavimo aukštis: 150 mm, galia: 17 kW (23,11 AG), šlifavimo juostos ilgis: 1 900 mm, įėjimo dažnis: 50 Hz, ruošinio plotis (maks.): 1 100 mm, Sandingmaster KCSB-1100 1-belt combination unit with electro-pneumatic sanding shoe for engagement and disengagement - Cleaning brush - Automatic belt centering - Digital display - Electric Sandomatic system - Belt dimensions: 1130 x 1900 mm - Working width: 1100 mm Duodpfx Abevqbc Ns Sel - Electric height adjustment: 3–150 mm - Max. workpiece height: 150 mm - Feed speed: 7 and 14 m/min - Motor power: 15 kW - Total connected load: approx. 17 kW - Net weight: 2000 kg - Condition: Fully functional, tested by us

Sąlyga: naudotas, SCM Sandya 600 RCS 110 Plati juostos kalibravimo ir smulkaus šlifavimo automatas Reiklus šlifavimo centras kalibravimui, masyvinės medienos ir faneros smulkiajam šlifavimui Aukščiausia komplektacija 1. Kalibravimo šlifavimo agregatas su RA įstrižai briaunuotu plieniniu kontaktiniu volu 2. Kombinuotas šlifavimo agregatas su kontaktiniu voleliu, 140 mm skersmens, 85 Shore kietumo, elastinga segmentinė šlifavimo bato sistema su elektroniniu sektorių valdymu Darbinis plotis: 1100 mm Pagrindinio variklio galia: 15 kW Vykdymas „B“ RCS modeliui MESAR elastingas segmentinis šlifavimo batas Elektroninė programavimo sistema „LOGIC SC“ su ekrano valdymu Elektrinis darbinio aukščio reguliavimas su automatiniu ruošinių atpažinimu Įdėjimo/išėmimo ritininis stalas ilgiems ruošiniams Staklės iš mažo amatininkų verslo / LEASINGO GRĄŽINIMAS Pirmas pristatymas 2017 Sandėlyje Lieboch / Galimas lizingas Duodoxtan Sspfx Ab Sol

Sąlyga: naujas, The ALTENDORF F 25 offers everything a panel saw needs in a compact footprint. Whether it's for your first own workshop, daily use, industrial production, or as a powerful secondary machine—the F 25 is the space-saving all-rounder that simply makes you more productive. Materials such as wood-based panels, solid wood, wood-like materials, or extruded profiles can be efficiently processed with maximum precision, straightforward handling, and outstanding cut quality. The saw unit, which can tilt to one side, also enables angle cuts. The smooth-running double roller carriage based on the Altendorf system, as well as digital height and tilting display, are standard features. A machine equally suited for both beginners and professionals. Double roller carriage Tiltable Manual height and tilt adjustment Parallel fence with manual fine adjustment Angle/miter fence Preparation for subsequent installation of a scoring unit ----- Technical Specifications ----- Tilting range: 0 - 46° Carriage length: 3,200 mm Cutting width: 1,000 mm Cutting height: 100 mm Max. saw blade Ø: 315 mm Max. blade projection: 104 mm Non-CE version: Max. saw blade Ø: 350 mm, Max. blade projection: 121.5 mm Crosscut fence extendable up to: 3,450 mm Speeds: 4,200 rpm Motor output: 4.4 kW, 5.5 HP Working table height: 880 mm Dedpfsu R S Hcjx Ab Soul - Large extraction hood available as an option - - New display machine -

Sąlyga: naujas, Gamybos metai: 2025, for machining smaller parts, especially solid wood Simple and safe operation Combination sanding unit with sanding pad for calibrating solid wood Control panel on the front side Standard with ribbed steel roller diameter 120 mm and hard sanding pad with graphite lining on a replaceable insert Motorised height adjustment of the worktable Electronically controlled sanding belt oscillation Manual star/delta motor startup Mechanical measurement of table position Ammeter for indicating the current draw of the sanding unit Two feed belt speeds Electromagnetic brake Combination unit for calibration and sanding Ribbed steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite overlay Universal design for calibration and sanding work on solid wood Model: BBS 630 C Article number: 5343065 Technical Data Working width: 630 mm Diameter of working roller: 120 mm Sanding belt width: 650 mm Sanding belt length: 1600 mm Sanding belt speed: 18 m/s Min./max. workpiece height: 3/160 mm Feed speed: 4.5 / 9 m/min Motor power: 5 kW / 400 V Feed motor: 0.43 kW Height adjustment motor: 0.18 kW Compressed air consumption: 20 l/min Operating pressure: 5.5 bar Operating pressure for belt blower: 8 bar Extraction pipe diameter: 150 mm Extraction capacity: 3,000 m³/h Dedpjcnw U Refx Ab Soul Dimensions (mm): 600 x 1010 x 1500 mm Weight: 770 kg Location: Arriving in stock at 54634 Bitburg

Sąlyga: naudotas, Gamybos metai: 2021, Number of spindles: 5 pcs Working width: 250 mm Planing height: 160 mm Planer table length: 2500 mm Feed motor: 4 kW Feed speed: 6–24 m/min Control: K2 Basic 7" Touch KUPER SWT XL-5 AUTOMATIC PLANING AND MOULDING MACHINE ----- LIKE NEW, DEMONSTRATION MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 – 6,000 rpm, spindle 4,500 – 8,000 rpm - Width and height motorized positioning: left spindle radial top spindle axial - Feed beam motorized positioning - Further motorized positioning: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125–163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (with tool diameter up to 163 mm): 10 – 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm The machining of the workpieces depends on the following operating parameters: Material, wood moisture, tools, chip removal diameter, and feed speed. Adjustments to the operating parameters may be necessary. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with frequency inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 125–160 mm Rabbet cutter: diameter difference 20–25 mm to the planing head Important: Machine cannot be operated without a jointer rabbet cutter Suction port D = 125 mm Tool clamping system: Quick-clamping nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with frequency inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Suction port D = 125 mm Extraction: individually adjustable chip deflector plate Tool clamping system: Quick-clamping nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with frequency inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Suction port D = 125 mm Extraction: individually adjustable chip deflector plate Tool clamping system: Quick-clamping nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with frequency inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 112–200 mm Pressure shoe: pneumatically and dynamically adjustable via linear guides Standard profile depth: 20 mm Suction port D = 125 mm Extraction: individually adjustable chip deflector plate Tool clamping system: Quick-clamping nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM Duodpfxowgwmns Ab Sol ----- Siemens IE3 motor with f...

Sąlyga: geras (naudotas), Gamybos metai: 2003, bendras svoris: 1 900 kg, Paoloni Kalibra 30 – Maximum sanding width 110 cm – 15 kW main motor – First unit equipped with a steel roller – Second unit with a pad shoe and a rubber-coated roller Dedorumipepfx Ab Soul – Pad control conveniently operated from the table – Weight 1,900 kg The machine is in very good working condition.