Haberkorn,Okoma,Goetzinger Langų Sistema pirkti naudotą (17 952)

Būklė: naudotas, Slotting spindle 1 pc. Number of milling units 1 pc. Spindle diameter 40 mm Small window production line consisting of: ----- 1) Haberkorn FZS1 slotting machine. Price: €12,500 2) Okoma SF3F table milling machine with glazing bead saw. Price: €4,000 3) Oertli tooling for Haberkorn and Okoma machines. Price: €7,500 Timber window tool set IV 68/78/88 and one set timber-aluminum window IV 68/78, year 2011 4) Götzinger OBM Plus corner hinge & espagnolette drilling machine, hardware: Maco MultiMatic. Price: €7,000 (Hardware optionally convertible for surcharge upon request!) ----- Technical manufacturer description: - Haberkorn FZS1 slotting machine with automatic feed, - Continuously variable height adjustment, D 40 mm Cut-off saw: - Spindle arrangement: top - Three-phase motor: 3 kW - Spindle diameter: 30 mm - Speed: 2800 rpm - Saw blade diameter: 400 mm - Automatic brake with speed monitoring - Horizontal positioning pneumatic; manually adjustable - Guard and extraction hood with extraction port diameter: 100 mm Slotting spindle D 40 mm: - Power: 7.5 kW - Speed: 4200 rpm - Usable length: 252 mm - Max. tool diameter: 340 mm - 220 mm stroke, stepless height adjustment via precision recirculating ball screw - Guard and extraction hood with port diameter: 180 mm - Automatic brake with speed monitoring Angle table: - Swivel range: +/- 65 degrees - Programmable automatic counter block - Pneumatic clamp - Highly precise digital angle display - Automatic longitudinal compensation - Counter block always in cutting plane at any angle setting Special equipment: - Laser for workpiece positioning - Saw position pneumatic - Length stop LA 2500 mm + 1850 mm extension Iodpfxoxa Hi No Aauoia ----- 2) Okoma SF3F table milling machine with vertical spindle, 3 tools - Extraction connection stubs 2 x 120 mm - Spindle length: 270 mm - Opposing fence with fine adjustment and turret stop - Triple stroke, max. stroke height 90 mm - Glazing bead cut-off saw with guard and extraction hood, 80 mm blade diameter - 8-roll feed unit with stand and hold-down arm, required for setup for glazing bead cut-off saw - Pneumatic infeed device for edge gearboxes, speed 6000 rpm - 2x 3 kW motor - Tool holder diameter: 30 mm ----- 3) Oertli tooling for Haberkorn and Okoma machines - 1 set timber window IV 68/78/88 - 1 set timber-aluminum window IV 68/78 Tooling is sold in the condition, scope, and with accessories as available in our warehouse. Note on window cuts, tool drawings, tooling system lists: ENGELFRIED GmbH provides no guarantee that the actual tools correspond with the specified or drawn systems. ----- 4) Götzinger OBM Plus corner hinge and espagnolette drilling machine - Corner and scissor hinge drilling + espagnolette drilling - Vertical drilling unit with: - Quick-change drill head system - Pneumatic feed via foot switch - 1x espagnolette drill head 24 mm - 1x double corner hinge head - Hardware: Maco MultiMatic - 1x adjustable flip stop left with 6 positions - 1x adjustable flip stop right with 6 positions - 1x complete machine stand with tray - 220/400 V, 60 Hz, 1.3 kW - 1x roller conveyor approx. 1 m long with 2 rollers - 1x roller conveyor approx. 1.5 m long with 3 rollers ----- Price of the ...

Būklė: naudotas, Gamybos metai: 2004, Slot spindle: 2 units Number of milling units: 7 units Spindle diameter: 50 mm #6726 Weinig Unicontrol 12 CNC ----- Sale on behalf of customer. Machine connected and operational for demonstration. Including used window tooling for Unicontrol 12, OERTLI various wood thicknesses ----- Short summary: ----- - 2 slot spindles, each 640 mm length, CNC-controlled - Variable pitch system Iiodpfxeyyqm Ij Aauja - 3 x profile spindles, each 400 mm length, CNC-controlled - Fitting spindle + top and bottom grooving units - Including used window tooling for Unicontrol 12, OERTLI (various wood thicknesses and systems programmed and tested—see attached PDF) Detailed description: ----- Cross-cut saw ----- Cross-cut saw is electronic, horizontally adjustable steplessly Number of tools: 1 pc. Spindle speed: 3,000–6,000 rpm Spindle diameter: 40 mm Max. tool diameter: 400 mm Motor power: 3 kW Laser guide light for saw cut positioning Rounding unit ----- Position: horizontal bottom Motor power: 1 kW Spindle diameter: 20 mm Spindle speed: 9,000 rpm Max. tool circle: 130 mm electronic length stop, length: 3,500 mm ----- 1st tenoning and slotting spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2,800–4,000 rpm Spindle diameter: 50 mm Max. tool diameter: 380 mm Motor power: 15 kW 2nd tenoning and slotting spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2,800–4,000 rpm Spindle diameter: 50 mm Max. tool diameter: 380 mm Motor power: 15 kW 1st profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm, with top bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6,000 rpm Spindle diameter: 50 mm Max. tool circle: 232 mm Motor power: 11 kW 2nd profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm, with top bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6,000 rpm Spindle diameter: 50 mm Max. tool circle: 232 mm Motor power: 11 kW 3rd profiling spindle ----- Position: horizontal top...

Būklė: naudotas, Gamybos metai: 2006, Šliuzo velenas 2 vnt. Frezu agregatų skaičius: 5 vnt. Veleno skersmuo: 50 mm SCM Windor 40 R langų gamybos linija, pagaminta 2006 m. ----- Mašina yra visos langų gamybos įmonės pardavimo dalis, žiūrėti sandėlio numerį 1305-6979. Įrenginiai vis dar prijungti ir paruošti demonstracijai. Techninė santrauka: ----- - 2 ilgi CNC valdomi šliuzo velenai - Optima 16: gręžimo agregatai kaktinėms ir išilginei skylėms 't- ROTATEN: pasvirusių langų įtaisas - 3 ilgi CNC valdomi profilio velenai + agregatas iš viršaus ir apačios - Apvertimo vežimėlis mažiems varstomiems langams - Ruošinio grąžinimas Papildomi variantai už papildomą kainą: ----- - Naudoti Leitz langų ir durų įrankiai SCM Windor 40 R sistemai. Kaina 10 000 eurų - Atskira OKOMA UF 3 apvertimo mašina su pritaikytais įrankiais SCM Windor 40 R sistemai. Kaina 2 000 eurų - Naudota drožlių nutraukimo ir filtravimo įranga SCM Windor 40 R (daugiau informacijos PDF faile). Kaina 5 500 eurų (Techniniai duomenys pagal gamintojo informaciją, be garantijos!) Iiodpoyn R Imefx Aauja

Būklė: naudotas, Gamybos metai: 2004, Slotted spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm CNC control: Weinig PC-Nexus Weinig Uncontrol 12 With radial and axial NC spindles as well as VARIO table ..... The machine has been professionally dismantled and stored in 73447 Oberkochen. Technical Data Summary (Please enquire separately about any additionally included accessories) ..... Cross-cut saw ..... > Cross-cut saw, electronically/electrically, stepless horizontal adjustment > Number of tools: 1 pc. > Spindle speed: 3000–6000 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm Isdpeyrtzkofx Aaueia > Motor power: 3.7 kW > Laser guide light for identifying cutting section > Axial traverse: 150 mm NC axis, stepless electronic adjustment > Radial traverse: pneumatic, 8 positions for e.g. top edge rounding Rounding unit ..... > Position: horizontal, bottom > Axial traverse combined with cross-cut saw Electronic length stop ..... > Length: 4500 mm 1st tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial traverse: 580 mm NC axis, stepless > Spindle speed: 2,800–4,000 rpm > Tool diameter: 380–400 mm > Counter support: entire clamping length is countered 2nd tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial traverse: 580 mm NC axis, stepless > Spindle speed: 2,800–4,000 rpm > Tool diameter: 380–400 mm > Counter support: entire clamping length is countered Transfer conveyor ..... For transferring the components into the longitudinal machining area, including double workpiece separation before the entry to the longitudinal machining section. 1st profiling spindle (climb and conventional milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial traverse: 350 mm NC axis, stepless > Radial traverse: 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Tool swing diameter min.: 140 mm > Tool swing diameter max.: 232 mm 2nd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial traverse: 350 mm NC axis, stepless > Radial traverse: 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Tool swing diameter min.: 140 mm > Tool swing diameter max.: 232 mm 3rd profiling/milling unit (grooving unit from above) ..... > Position: horizontal, top > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial traverse: 30 mm NC axis, stepless > Radial traverse: 125 mm NC axis, stepless > Spindle speed ...

Būklė: naudotas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm # 2809 Weinig Unicontrol 6 Technical Data Overview (please inquire about any additionally included accessories) Pos. 1: Crosscut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for saw cut detection CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned crosscut saw Pos. 2: Tenoning and slotting spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for timber thickness 68 - 92 mm > Spindle speed: 3,000 rpm > Max. tool cutting circle: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (climb and counter rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for timber thickness 68 - 92 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for processing narrow, short elements (e.g. glazing bars) Glazing bar guide consisting of: Glazing bar support rail from above in the area of the vertical right profiling unit and profiling spindle. Ijdpfx Asxtvgkjaueia Pos. 5: Horizontal top profile milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment travel 52 mm, indexed to 2 positions > Radial adjustment travel 125 mm, indexed to 2 positions Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment travel: 90 mm, indexed to 3 positions > Radial adjustment travel: 100 mm, indexed to 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Other features ----- > Electric feed height adjustment incl. mechanical digital display and manual feed beam clamping > Rebating unit for splinter-free rebating > Double-piece package > Return conveyor for one-man operation: pivoting belt > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction port diameters: ----- Crosscut saw: 80 mm Slot spindle: 140 mm Profiling spindle 1: 140 mm Profiling spindle 2: 140 mm Grooving unit (top): ...

Būklė: naudotas, Used control cabinet from a Weinig Unicontrol 6, suitable as a source for spare parts or for building a new control cabinet. Contents include, among others: Iisdpjt Na Drsfx Aausa - Hilger & Kern brake device - Rathgeber transformer, type ET 1000.

Būklė: naudotas, Slotting spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Used Weinig Unicontrol 6 window machining center ----- For sale on behalf of customer Manufacturer’s description: Designed for the production of individual parts, components, and small series. Spindle arrangement: One crosscut saw, a single tenoning and slotting spindle, a right-hand profiling spindle, a tenoning/slotting spindle, and a profiling spindle suitable for stacking multiple tools on top of each other, with pneumatic spindle movement. Slot table with motorized table movement and automatic transfer into the continuous, chainless rubber roller feed of the profiling unit. Height adjustment of the feed by manual control. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for precise frame or sash external dimensions. Control of tool positions (longitudinal and cross machining) via selector switch on the operator panel. Technical data ----- Crosscut saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Maximum tool diameter: 350 mm Motor: 3 kW Tenoning and slotting spindle ----- Number of tools: 3/4 pcs. for timber thicknesses IV 68 – IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for timber thicknesses IV 68 – IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 232 mm Motor: 11 kW Special equipment: Synchronised spindle ----- Pneumatically actuated forward/backward motion for tear-free profiling of window sashes, frames, and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, tool min. diameter: 112–140 mm, max. tool diameter: 232 mm, spindle speed: 6,000 rpm Iodox Tu N Hspfx Aausia Motor upgrade for synchronised spindle from 4 kW to 7.5 kW Screen control for 99 window types. 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production possibilities: single pieces, double pieces, by frame, series production, profiling. Data input via keyboard with integrated user guidance and error diagnostics. 1 Groove spindle from above ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with keyway 10 x 4 mm Mounting length: 13 mm Clamping length: 40 mm Axial stroke: 2 positions Radial stroke: 2 positions Max. tool diameter: 130 mm Motor upgrade for groove spindle from 2.2 to 3 kW 1 hardware recessing unit, right: ----- For routing the hardware groove during profiling or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the operator panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting circle: min. 140 mm, max. 180 mm Home position below table: 10 mm Hardware router in special design: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial stroke, 2 positions Motor upgrade for hardware routing spindle from 2.2 to 3 kW Hardware routing spindle for 230 mm tool diameter in and above table Electrical height adjustment of the feed with selector switch on the operator panel for 2 timber dimensions, includ...

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, I am selling the SCM Multiflex window fabrication corner jointing machine. Equipped with VIVALDI EU68mm milling heads. Tenoning unit and mortising spindle on the right (tenoning side). Two profiling spindles and glazing bead cutting saw on the left (profiling side). Available immediately. Iiedpfehw Dfysx Aauoa

Būklė: naudotas, Grooving spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, plus VARIO table and trimming carriage ..... Machine professionally dismantled and in stock at our warehouse in 73447 Oberkochen. Video and photos were taken before dismantling. Technical Data Summary (Please inquire about any additionally included accessories) ..... Cross-cut saw ..... > Cross-cut saw electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.7 kW > Laser guideline for cutting section recognition > Axial adjustment travel: 150 mm NC axis, electronically infinitely adjustable > Radial adjustment travel: pneumatic, 8 positions for e.g. top edge rounding Rounding unit ..... > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Maximum tool diameter: 130 mm > Axial adjustment mechanically linked to cross-cut saw > Radial adjustment pneumatically controlled On/Off electronic length stop ..... > Length: 4500 mm 1st Tenoning and Grooving Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing Iiedpfex H Al Nsx Aauoa > Axial adjustment travel: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Maximum tool diameter: 400 mm > Anti-spin counter, full clamping length is countered 2nd Tenoning and Grooving Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Maximum tool diameter: 400 mm > Anti-spin counter, full clamping length is countered Transfer belt ..... For transferring parts to the longitudinal processing unit, including double-part singulation before infeed into the longitudinal processing. 1st Profiling Spindle (Climb and Counter Direction) ..... > Position: vertical, right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm NC axis, infinitely adjustable > Radial adjustment travel: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically controlled to tool diameter 2nd Profiling Spindle ..... > Position: vertical, right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm NC axis, infinitely adjustable > Radial adjustment travel: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...

Būklė: naudotas, Length 2700 mm Width 1100 mm Height 850 ± 150 mm Motor power 0.37 kW Electrical power 0.5 kW Compressed air 6 bar Horizontal impregnation unit 'Pro flow' for single parts with rinse cycle. ----- Function features: Machine for horizontal flooding of single parts. The product is applied via a row of nozzles. Excess product is blown off by air jets. The pump and the air jets are automatically controlled and are only activated when a workpiece is passing through. This reduces compressed air consumption. The recirculation mode ensures minimal product usage. ----- Construction features: Structure Robust steel frame, painted with high-strength, water-soluble products. Machine body made of thick, hot-welded polypropylene panels. 4 independent chambers for infeed, flooding, blowing, and outfeed. Horizontal workpiece feed Via motor-driven grooved plastic rollers. Electric inverter for adjusting and changing the feed speed. Transmission The machine is equipped with an exclusive system that positions all transmission components outside the flooding chamber for easy operator access, ensuring longer operating life and facilitating maintenance operations. Moving components are protected by covers and appropriate seals. Recirculation pump Pneumatic double diaphragm pump with valves, seals, and diaphragms made of nitrile rubber, and a housing made of plastic material (PVDF). Air jets The first chamber features an air-blow system to prevent product leakage. A second air-blow system after the flooding chamber removes excess product from the workpiece. Iiodpsnl Nqqofx Aauea Electrical control panel According to CE, protection class IP 55. Includes inverter for setting the feed speed. Technical data Length mm 2700 Width mm 1100 Feed speed (min./max.) m/min 3–6 Drive group motor power kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 ± 150 Min. length of workpieces to be impregnated mm 250 Max. width of workpieces to be impregnated mm 300 Max. height of workpieces to be impregnated mm 250 Compressed air consumption l/min 2000 Required compressed air pressure bar 6 Equipment and included accessories Rinse circuit for Pro Flow ----- Price of the above machine: on request! Plus packaging and transport ----- (Technical specifications as per manufacturer – without guarantee! Illustrations may differ from the original, prices net, plus VAT (domestic))

Būklė: naudotas, Slotted Spindle 1 pc Number of Milling Units: 4 pcs Spindle Diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC-controlled radially and axially --- The machine was factory-refurbished by Weinig in 2024. During this process, the control system was upgraded to Siemens S7 677 C with a new “touch” membrane panel. Equipped with the following processing units: Crosscut Saw --- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatically across 8 positions for edge rounding from above Edge Rounding Unit from Below Iiedpfjxpi Dujx Aauea --- Axial adjustment paired with crosscut saw Tenoning and Mortising Spindle --- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm minimum tool cutting circle 380 mm, maximum 400 mm tool clamping length 640 mm axial adjustment CNC axis axial adjustment stroke 580 mm adjustment speed 100 mm/sec 1st Profile Spindle (Conventional and Climb Milling) --- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd Profile Spindle --- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal Profiling Unit, Upper --- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment over 8 positions axially and radially Vertical Profiling Unit, Right at Machine End --- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment over 8 positions axially and radially Additional Equipment --- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, incl. positioned crosscut saw integrated into the control Window mullion cutting unit, swivels 60° both sides double-part handling package with automatic singling and transfer feed-in device with window automation for rebating rebate carriage for rebating narrow sash widths climate control unit in the switch cabinet PC control NEXUS automatic turning system lamella conveyor, including return conveyor for transporting workpieces back to the operator (Technical data according to manufacturer – subject to confirmation).

Būklė: naudotas, Slotting spindle 1 pc. Number of milling units 5 pcs. Spindle diameter 50 mm Control: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and fully inspected before delivery ----- Technical Data Summary (For any additional included accessories, please inquire) Item 1: Cross-Cut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3 kW > Radial travel, pneumatically controlled, 8 positions, e.g. for edge rounding from above > Laser guide light for cut section identification Item 2: Rounding Unit, Horizontal Lower Position ----- > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial movement mechanically linked with cross-cut saw > Radial travel, pneumatically controlled (on/off) NC-Controlled Length Stop ----- > Length: 3,500 mm > Electronic length stop Item 3: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3,500 rpm > Max. tool circle diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 4: 1st Profiling Spindle (Climb/Counter-Climb Cutting) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle diameter: 232 mm > Motor power: 7.5 kW Item 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash guide consisting of: Guide fence on the stop (area of climb-cut spindle), Sash support rail from above in the area of the vertical right profiling unit and profiling spindle. Item 6: Horizontal Upper Profile Milling Unit ----- Ijdpfx Aaevu Hghoujia > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool circle diameter: 130 mm > Axial travel: 30 mm, 8 positions > Radial travel: 125 mm, 8 positions Item 7: 3rd Profiling Spindle (Hardware Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial travel: 115 mm, 8 positions > Radial travel: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool circle diameter: 210 mm > Motor power: 3.0 kW Item 8: Bottom Profile Milling/Grooving Unit ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Būklė: naudotas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- The machine will be cleaned and fully inspected before delivery. Technical Data Overview (additional accessories possibly included; please inquire separately) Pos. 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally adjustable steplessly > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut detection > NC length stop, mounted on slot table included Positioning of cross-cut saw integrated in the control system. > Length: 3500 mm Pos. 2: Tenoning and slot spindle ----- > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling spindle (climb & counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Muntin guide consisting of: Guide rail on the stop (climb spindle section), muntin support bar from above in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal profiling unit, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool diameter: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret Iodpevu Hfqofx Aaujia > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online-capable > Rebate device for tear-free rebating > Double-parts package > Return system for one-man operation: swivel belt > Screen control > Tilt window unit > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without working tools No original pictures available yet. Images show an identical machine from our archive. ----- Price for the above-mentioned machine on request! ----- Option with surcharge: EUR 6,500.00 Note...

Būklė: naudotas, Žvynelinė iškrovimo sistema su integruota presavimo įranga / Mobilus pristatymas su presavimo įrenginiu Heidelberg SPH-70 Žvynelinė iškrovimo sistema su presavimo įranga / Lentos tipo iškrovimas su presavimo įrenginiu Heidelberg SPH-70 Pagaminimo metai: 2016 – Serijos Nr.: 1224446842 Iisdeyldg Rspfx Aauoa Min. dydis: 40 × 75 mm – maks. 700 x 1000 mm Produkto storis maks.: 4 mm Presavimo jėga: 12 000 N Standartinis UPS kiekis: maks. 2–4 Įleidimo aukštis: 400–1000 mm Valdymas: MCT1 valdymo pultas su ekranu Internetinė vaizdo apžiūra per WhatsApp – MS Zoom – Telegram Sandėlyje Emskirchene/Niurnberge – Prieinama iš karto – Galima išbandyti

Būklė: labai geros būklės (naudotas), Catalogue number 7382 TECHNICAL DATA Tenoning carriage: - Powered carriage feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor 0.46 kW - Table size (L/W): 700x450 mm, extendable to 1150 mm - Cross fence on carriage – cutting length on telescopic extension: 1860 mm - Swivel block in fence - 2 pneumatic clamps Cross-cut saw: - Max blade diameter: 380 mm - Max cutting height: 110 mm - Blade adjustable up/down, forward/back, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Height and stroke adjustment via handwheels - Max tool diameter: 320 mm - Spindle diameter: 40 mm - Spindle working height: 220 mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Height and stroke adjustment via handwheels - Max tool diameter: 200 mm - Spindle working height: 220 mm - Spindle diameter: 54 mm - Spindle lock - Retractable support from table Iiodpjymm Nqjfx Aauea - Motor: 7.5 kW Glazing bar cutting saw: - Max blade diameter: 200 mm - Bore diameter: 30 mm - Blade adjustable front/back, up/down - Blade guard - Motor: 2.2 kW Feeder: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50 mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameter: 60 mm, 2x130 mm, 110 mm, 100 mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600 mm, weight approx. 2500 kg FEATURES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Cross-cut saw – Tenoning spindle – Unpainted, used machine, very good condition Net price: 27,900 PLN Net price: 6,640 EUR based on a rate of 4.2 EUR (Prices may vary depending on exchange rate fluctuations)

Būklė: naujas, Working length: 2451 mm Working width: 2170 mm Working height: 800–1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- Base Frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800 mm–1000 mm) - Conveyor system for timber lengths from 300 mm to 4,200 mm - Conveyor system for timber widths up to 240 mm Roller Conveyor – Infeed - Continuously driven roller conveyor, approx. 5–25 m/min - Drive via 0.37 kW geared motor, drive shaft and PU round belt - Roller diameter 50 mm, roller cover length 240 mm with PVC coating Iedpsi Hmpiofx Aaueia - Transfer to cross conveyor by raising/lowering the roller conveyor - Roller covers in accordance with HBG Cross Conveyor - Cross conveyor with 6 traverses - PVC-coated conveyor belts (green), 50 mm wide, guided in plastic channels - Continuously driven cross conveyor approx. 5–20 m/min - Drive via 0.37 kW geared motor - Approx. 1,750 mm from stop to stop Roller Conveyor – Outfeed - Continuously driven roller conveyor, approx. 5–25 m/min - Drive via 0.37 kW geared motor, drive shaft and PU round belt - Roller diameter 50 mm, roller cover length 240 mm with PVC coating - Transfer to cross conveyor by raising/lowering the roller conveyor - Roller covers in accordance with HBG ----- Belt Conveyor approx. 320 mm x 3,500 mm Base Frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800 mm–1000 mm) - Belt conveyor for timber lengths from 300 mm to 4,200 mm - Belt conveyor for timber widths up to 240 mm - Belt conveyor on castors with brakes Belt - Continuously driven, approx. 5–25 m/min - Drive via 0.37 kW geared motor - Belt, PVC-coated, 260 mm wide - Adjustable stops approx. 15 mm on each side ----- Control System: - Plug-and-play with its own control system and logic - Siemens PLC, 24 V DC - Siemens frequency inverter - Optical limit switches and emergency stop loop - Fully installed with 16A European plug - Connection: 400V AC, 2 kW, 50 Hz ----- Pneumatics: 6–8 bar, consumption approx. 16 NL/min Colour: RAL 7035 light grey Complies with basic EU directive 2006/42/EC in accordance with 2006/95/EC Electrical Equipment (Low Voltage Directive) and 2004/108/EC EMC Directive ----- Price for the above-mentioned specification ex works: on request! plus packaging and transport costs ----- (Technical information according to manufacturer. Subject to change and without guarantee!)

Būklė: naudotas, Gamybos metai: 1985, Svoris: apie 3000 kg Matmenys: apie 3700 x 2000 x 1600 mm Sandėliavimo vieta: Nattheim Ijdpfxjvvi Tte Aaujia

Būklė: naujas, Gamybos metai: 2026, Number of spindles: 1 pc. Maximum drilling depth: 150 mm Motor power: 1.5 kW Götzinger System Hoffmann Frame and Mortising Drilling Machine HF 150 E The alternative to classic mortising machines The HF 150 E model offers beginners the ability to do more than just cut mortises. This model provides everything required for precise frame drilling—and all at an affordable price. Proven linear guides guarantee vibration-free precision drilling. The feed motion is manual. The workpiece stop systems ensure clear, practice-oriented operation. Convincing advantages: - Universally applicable – the use of the machine is fully adaptable to the user's requirements. Whether as a frame drilling machine for drilling intermediate and corner joints, or as a dedicated mortising machine—this unit offers the right solution for any need. - Ergonomic and practical – all adjustments, operation, and tool changes are made exclusively from the operator’s side. The workpiece clamping is pneumatic via hand valves—no physical effort required as with mechanical lever clamping. - Precise results – repeat accuracy of hole patterns and positions is ensured by a 12 mm pitch grid. The drilling height is set manually via digital display (0.1 mm increments). - Expandable and upgradable with special accessories for any application—such as longitudinal stop systems in various designs, adjustable side stops, line lasers for scribing, miter angles, quick-change drilling head for using multi-spindle heads, and much more. Technical Data Drilling Unit ----- Height adjustment via digital display Manual height adjustment: 100 mm Drill stroke/depth: 150 mm manually Lateral adjustment: 320 mm via grid Drilling pattern width: 12 mm pitch (standard) Three-phase motor: 230/400 V, 50 Hz, 2,850 RPM, 1.5 kW Stop System ----- 2 side stops, can be swivelled in/out Tool Holder ----- Special drill chuck with 2 tool adapters, 1 × M10, 1 × diameter of your choice Workpiece Clamping ----- Pneumatic via manual slide valve Machine ready for operation on mobile base Iodpfoytx Uxox Aaueia (Technical data according to manufacturer—no guarantee!) Special accessories – see PDF attachment!

Būklė: naujas, Gamybos metai: 2026, Number of spindles: 1 unit Maximum drilling depth: 150 mm Motor power: 1.8 kW Götzinger HR 150 – System Hoffmann This machine guarantees you the highest precision in drilling on two planes. Frame and slot mortising machine; allows drilling on two planes in a single clamping operation. - Well-designed, precise, and practical stop system - Exceptionally smooth, backlash-free indexing, feed, and lateral adjustment - Guide systems to meet the highest demands - Special drill chuck – precise, smooth rotation - Drilling planes indicated via digital display - Two side stops offer significant advantages; center stop available on request - Continuous front stop with position markings - Drill pattern freely selectable according to wood profile, 12 mm grid as standard, special grids possible - Integrated dust extraction - Interchangeable accessory units (e.g., drilling heads, mitre stops, balustrade device, side and folding stops) can be mounted and removed easily without tools. Technical Data: Drilling Unit ---- Height adjustment on 2 planes via digital display Pneumatic vertical adjustment of 100 mm Drilling stroke/depth 150 mm, manual Lateral adjustment 320 mm via index Drill pattern width 12 mm pitch, standard Three-phase motor with 2 speeds: 230/400 V, 50 Hz, 1,420/2,840 rpm, 1.3–1.8 KW Tool Holder ---- Special drill chuck with two tool change inserts: 1 x M10, 1 x D 16 Stop System ---- 2 swiveling side stops Iodpfxoytx T Is Aauoia 1 longitudinal stop (tube) with adjustable folding stop approx. 1500 mm Slot mortising stops on the left and right Workpiece Clamping ---- Pneumatic via foot pedal Dust Extraction Special accessories – see PDF attachment (Technical data as per manufacturer – subject to change!)

Būklė: naudotas, Gamybos metai: 2011, Working width from to 80–120 mm Working height from to 30–80 mm Working length 1200–1600 mm GÖTZINGER Finger Jointing Line - Year of manufacture: 2011 - Free loaded ex location - On behalf of customer Technical specifications: Min. – max workpiece width: 80–210 mm Min. – max workpiece height: 30–80 mm Min. – max workpiece length: 1200–6000 mm Finger jointing shaper - Feed speed: 0–4 m/min - Operating pressure: 6 bar - Air consumption: 6 l/min - Cycle rate: 2 – 6 pieces - Table height: adjustable via over 50 leveling feet – 900 mm - Weight: 520 kg - Extraction ports: 1 x 120 mm, 2 x 80 mm - Air velocity: 25 – 30 m/sec - Air requirement: 6 – 8 m³/min - Shaping motor: 7.5 kW / 380 V / 50 Hz - Speed: 6000 rpm - Workplace-related emission value: according to DIN 45637 - Idle noise: 82 dB(A) - Operating noise: 85 – 87 dB(A) - Length: 2.25 m - Width: 1.70 m - Height: 1.80 m - Base color: RAL 7030 - Secondary color: RAL 5007 Gluing station - Adjustable glue pressure: 0 – 20 bar - Adjustable spray pressure: 0 – 4 bar - Glue tank: for 10 kg white glue - Wide spray valves: 2 - Spot spray valves: 2 - Length: 1.50 m - Width: 0.50 m - Height: 1.20 m - Weight: 90 kg - Base color: RAL 7030 Finger jointing press - Axial pressing force: 10,000 daN - Max. operating pressure: 200 bar - Electrical connection: 4.0 kW / 380 V / 50 Hz - Working height: 900 mm Crosscut saw Iisdpoyk H U Isfx Aauea - Extraction port: 1 x 80 mm - Air velocity: 25 – 30 m/sec - Air requirement: 6 – 8 m³/min - Motor speed: 3,000 rpm - Saw blade: 400 mm, bore 30 mm - Saw stroke: 300 mm - Length: 0.50 m - Width: 0.60 m - Height: 1.50 m - Weight: 80 kg Powered roller conveyor - 260 x 3000 mm - Manufacturer: Haberkorn Total connected load - Total connected load: 30 kW - Main circuit breaker: 50 amperes - Operating voltage: 3 x 380 V - Frequency: 50 Hz - Control voltage: 24 DC - Voltage fluctuation: +/- 5% - Air pressure: 5 – 6 bar

Būklė: geras (naudotas), Gamybos metai: 1980, gerai išlaikyta griovelių pjovimo staklės, žinomo gamintojo Okoma, su 40 mm ašimi Isdpfxexvllzo Aaueia

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1988, Langų gamybos staklės Gamintojas: Okoma Modelis: UF1 S Metai: 1988 su įrankiais Isdpfxeyk Haqo Aaueia

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Conveyor Belts Manufacturer: Haberkorn Ulmer Year of manufacture: 2006 Equipped with 4 support legs Length: 3.0 meters Iijdpjvy Ikxofx Aauoa Width: 0.80 meters Height: 1.2 meters

Būklė: naudotas, Crosscut Saw 3 kW Spindle Diameter: 50 mm Spindle Length: 300 mm Number of Tool Sets: variable Control: CNC Dimensions (L x W x H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Grooving Machine FZS-2 Electronic, with stepless grooving spindles and automatic roller table ----- Crosscut Saw ----- Spindle arrangement: top Three-phase motor 3 kW Spindle diameter: 30 mm Speed: 2800 RPM Saw blade diameter: 400 mm * Automatic brake with speed monitoring * Infinitely adjustable saw positioning with Siko display * Safety and extraction hood with 100 mm diameter extraction port 2 grooving spindles, 50 mm diameter ----- Power: 2 x 7.5 kW Speed: 4200 RPM Spindle diameter: 50 mm Tool diameter: approx. 360 mm Usable length: 300 mm * Both grooving spindles positionable via ball screw spindle * Freely programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm diameter extraction port * Automatic brake with speed monitoring Swivel Table ----- * Swivel range: +/- 65° * Automatically changing counter block (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Counter block in the cutting plane at every angle setting Special Equipment ----- Steplessly adjustable roller table feed Laser for workpiece positioning Iiedpewgwlkofx Aauja Manual length stop LA 2000 Length: 2500 mm Extraction port diameters: 2 x 180 mm for grooving spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine on request! ----- Images show the same model. Original images not yet available. (Technical data as per manufacturer's information - no guarantee!) All prices are net, plus statutory VAT.

Būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, Nėra minimalios kainos – garantuotas pardavimas už aukščiausią kainą! Pasiūlymo pateikimas įpareigoja laiku atsiimti prekę – nuo 2026-05-11 iki 2026-05-13 arba nuo 2026-05-18 iki 2026-05-21! Aukcione 8 spaudinės įvorės, įskaitant pneumatinę spaudimo sistemą! Iiodpfx Ajym Sn Soauea TECHNINĖ INFORMACIJA Skersmuo: 140 mm ĮRANGOS DUOMENYS Išmatavimai ir svoris Išmatavimai (I x P x A): 800 x 600 x 200 mm Svoris: 50 kg Išorinė nuoroda: Pieper - Lot 171