Gehring Vertikali - Honingo Mašina - Vidaus pirkti naudotą (50 368)

Būklė: naudotas, Technical details: Drilling diameter: 4-31 mm Stroke: 350 mm Gsdpswx Shkefx Ap Ijuc Throat depth: 250 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: 60305, General Information / Technical Data: Manufacturer: Rausch Model: RS6 / 1000 Year of manufacture: 07/2000 Machine no.: 60305 Weight: approx. 750 kg Pulling force: 60 kN (80 kN) Broaching speed: 4 m/min Return speed: 8 m/min Max. stroke: 1000 mm Maximum tool length: 1200 mm Maximum workpiece diameter: approx. Ø 900 mm Table bore: Ø 90 mm for standard broaching mandrels Dimensions (H x W x D): 1600 mm x 850 mm x 1000 mm (H = table height from floor without attachments) Power supply: 400 Volt / 50 Hz – 6 / 7.5 kW Accessories / Special Equipment: – Electric jaw monitoring (tool removal control to prevent unintended return of the pull bridge) – Integrated coolant system with check valve and drain tap – Patented coolant/lubricant swing system (retrofit) Note: The machine has the manufacturer's CE marking. Gedpfxsiqkb Re Ap Ieuc The machine is powered in our warehouse and can be inspected.

Gamybos metai: 1960, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 1733, Vertical internal broaching machine with index plate by Karl Klink Type: RSI10DT Guodpfx Apjgyd S Se Ioc Machine No.: 1733 Year of manufacture: 1960 Weight: 4.9 t Broaching force: 10,000 kg Equipped with index plate (2 stations) Power supply: 380V / 50Hz Rated current: 35 A Connected load: 7.5 kW The machine has been fully overhauled and is therefore in very good condition.

Gamybos metai: 1960, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 1732, Vertical internal broaching machine with index plate by Karl Klink Model: RSI6DT Machine No.: 1732 Year of manufacture: 1960 Weight: 3.2 t Broaching force: 6,000 kg Gusdjgyd Svjpfx Ap Isc With index plate (2 stations) Power supply: 380V / 50Hz Rated current: 15 A Connected load: 4 kW The machine has been fully overhauled and is therefore in very good condition.

Gamybos metai: 1964, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 2041, Vertical internal broaching machine with index plate by Karl Klink Type: RSI8DT1 Machine No.: 2041 Year of manufacture: 1964 Weight: 3.2 t Broaching force: 8,000 kg Gedpfx Apjgyd S Do Isuc With index plate (2 stations) Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5.5 kW The machine has been completely overhauled and is therefore in very good condition.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, Vertikali stiklo plovimo mašina Maksimalus darbo aukštis: 1300 mm Viršuje atsidaro Darbo kryptis: iš kairės į dešinę Šepečiai: 4 (2 poros) Stiklo storis: 4–12 mm Žr. pridėtas technines specifikacijas Labai geros ir švarios būklės Geros darbinės būklės, patikrinta Parduodama tokia, kokia yra Iš karto prieinama Gjdoy Uhmuspfx Ap Ijuc Žiūrėkite vaizdo įrašą

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2009, Vertikali stiklo plovimo mašina Darbo aukštis: 1500 mm Viršuje atvira Stiklo storis: 2–13 mm Darbo kryptis: iš dešinės į kairę Plovimo mašina susideda iš: - 1 poros šepečių, Gujdoy Na Rnopfx Ap Ijc - 1 poros oro peilių, - 1 iš trijų dalių pagamintos nerūdijančio plieno vonios (viena vonios dalis su reguliuojamu šildymu), - motorizuotų padavimo ir išleidimo konvejerių, - indikacinių lempučių išėjime. Transporterių greitis reguliuojamas variatoriaus rankenėle (su indikatoriumi) Bendrai: Ilgis 4900 x Plotis 1500 (su ventiliatoriumi) x Aukštis 2650 mm Labai gerai ir švariai išlaikyta Geros darbo būklės, išbandyta Žiūrėkite vaizdo įrašą Parduodama tokia, kokia yra Prieinama iš karto

Būklė: naudotas, Technical Details: Drilling capacity in steel (diameter): 40 mm Throat depth: 360 mm Drilling stroke: 280 mm Spindle taper: MT 5 Spindle speed: 32 - 1400 rpm Feed rate: 0.11 - 1.73 mm/rev Connected load: 6 kW Max. distance spindle/table: 750 mm Table clamping surface: 780 x 650 mm Vertical table adjustment: 800 mm Column diameter/size: 230 x 950 mm Approx. machine dimensions (LxWxH): 1.1 x 0.8 x 2.8 m Approx. machine weight: 1.5 t Gujdpfx Apewid Uwe Isc With right- and left-hand thread cutting reverse.

Būklė: naudotas, Gamybos metai: 2008, Techniniai duomenys: Gręžimo galia pliene (skersmuo): 40 mm Gusdpfxsviqybj Ap Isc Išmetimas: 350 mm Gręžimo eiga: 120 mm Gręžimo galia ketaus: 60 mm Veleno tvirtinimas: MK 4 Veleno išmetimas: 350 mm Veleno apsukos: 50–1450 / 18 žingsnių aps./min Padavimas: automatinis / rankinis mm/aps. Maks. atstumas tarp veleno ir stalo: 25–705 mm Stalo tvirtinimo paviršius: 430 x 430 mm Gręžimo stalo reguliavimas: 680 mm Kolonos skersmuo: 150 mm Atstumas nuo veleno centro iki pagrindo plokštės: 1210 mm Bendras galios poreikis: 1,6 kW Mašinos svoris apie: 350 kg Mašinos matmenys apie (I x P x A): 0,95 x 0,55 x 2,3 m Stalas reguliuojamas aukštyje (pasukamas ir palenkiamas) Stalas pasukamas 45° į kairę/dešinę ir 360° aplink koloną Sriegiavimas iki M24 Aušinimo skysčio sistema

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, pjovimo ilgis (maks.): 600 mm, pjovimo plotis (maks.): 410 mm, The machine is in excellent condition – like new. Equipped with a vertical heater and jaws for PE (polyethylene) film packaging – complete set of jaws for laminates also available. Forming tube for a package width of 350 mm – other sizes available. Guedpfx Apey Tqybe Isc Technical data for ILAPAK Ilapak Vegatronic 4000 VFFS: ▪️ Output: up to 140 packs/min ▪️ Machine type: Continuous Film Motion ▪️ Type: VFFS – Vertical Form Fill Seal Bag size: ▪️ Minimum width: 70 mm ▪️ Maximum width: 410 mm ▪️ Maximum length: 600 mm Supported films: ▪️ heat-sealable films ▪️ polypropylene (PP) ▪️ laminates ▪️ PE (polyethylene) film Film reel: ▪️ max. reel width: 880 mm ▪️ max. external diameter: 550 mm ▪️ core diameter: 76 mm ▪️ max. reel weight: 100 kg Power supply: ▪️ 400 V ±5% ▪️ 3 phases + neutral ▪️ 50 Hz ▪️ 7.5 kW Compressed air: ▪️ 7 bar ▪️ 350–900 Nl/min Control system: ▪️ Industrial PC ▪️ 8.4” touch panel ▪️ memory for up to 100 programs Construction: ▪️ stainless steel ▪️ hygienic Open Frame design ▪️ quick bag format changeover ▪️ film centering ▪️ servo drives Machine dimensions: ▪️ 1478 × 2336 × 1550 mm Weight: ▪️ approx. 1500 kg

Būklė: naudotas, Baudin vertical grinder Guedpfx Apoh Ab Sco Ioc machine sold without startup

Gamybos metai: 1992, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 238828, Available: immediately available Guedpfx Apopr Uvro Ijc

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Achse 920 mm x-Axis 3000 mm Material thickness Z 12 mm - 30 mm Feed speed 20 m/min. A-Axis 360 degrees Minimum dimensions: Plate: x = 300 mm y = 120 mm z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in the X direction Max. cutting depth with saw blade: 10 mm Motor 0.75 HP, 400 Volt Required extraction capacity: 2,300 m³/h Location: arriving at stock 54634 Bitburg Guedpfx Ajfmdcqep Ioc - immediately available -

Būklė: naudotas, Gamybos metai: 2002, Gręžimo galia 25 mm, griebtuvo tvirtinimas MK 3 Sandėliavimo vieta: Nattheim Godpfx Ajvvi Ausp Ijuc

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2017, veikimo valandos: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler model MG 50 T.V.E. 1200x1100x3500h suitable for compacting and forming bales from soft material waste such as glass wool mats or similar products. The MG 50 T.V.E. model features a fully enclosed compaction chamber. The loading door for the material and the bale ejection door can both be opened. The control panel is mounted on the side with integrated controls, and comes equipped with a 10-meter extension to allow remote positioning away from the compactor. The pressing plate is driven by a single cylinder with a 2700mm stroke and guided by 4 lateral sliding rails. Material loading is performed frontally. The compaction cycle (compactor down/up movement) is automatic and push-button operated. - For transport, the machine is built in three sections: one 2000 mm high, one roughly 2300 mm, and the cylinder, which is installed on site. - Bale tying is preset and performed with the doors open. Tying is completed manually, using slots at the rear of the chamber. Bales can be tied using standard pre-cut iron wire or strapping. - Bale removal is performed with a forklift; dedicated channels at the base allow the forklift forks to be inserted. - The bale ejection door is closed with a handwheel, ensuring safe opening even with highly elastic materials; a microswitch guarantees the door is securely closed for pressing. The upper door has a hydraulic lever lock with controls on the machine. - It can be installed against a wall. Only front clearance is required for material loading and bale removal. Gusdpfxjyzr Nmj Ap Iec - The hydraulic system is equipped with a safety block valve to prevent the pressing plate from dropping. - The machine must be anchored to the floor. It is positioned above a washing liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Pressing chamber: mm 1200 x 1100 x 3500 h • Feed opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single extraction • Operation: Automatic, push-button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: removal with forklift • Hydraulic power unit: integrated with the press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Footprint dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler, in excellent condition, sold as seen and approved.

Būklė: geras (naudotas), Labai aukštų specifikacijų maišų formavimo mašina. Platus formavimo rinkinių pasirinkimas, įskaitant blokinio dugno tipą. Gusdpsywpblefx Ap Iec

Būklė: naudotas, Gamybos metai: 2012, Siūlome naudotą OMAG MOD. CONF. DIVA-5 OMAG STICK PAKAVIMO MAŠINĄ, modelis DIVA/5, pagaminimo metai 2012. Modelis: MOD. CONF. DIVA-5 Serijos numeris: 2298 Pagaminimo metai: 2012 Apsauginės tvoros nuo nelaimingų atsitikimų atitinka CE standartus. Gujdpfxex Rw Hvo Ap Ioc Reikalinga elektros galia: trifazis 220/380 V, 50/60 Hz. Reikalingas suslėgtas oras: 6 atm. Rėmas - suvirintas plienas, nudažytas epoksidine derva. Spalvos kodas: RAL 9006 (OMAG standartas). Jei turite klausimų ar reikia papildomos informacijos, prašome rašyti žinutę arba susisiekti telefonu.

Būklė: geras (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 4 t, pildymo angos plotis: 730 mm, pildymo angos ilgis: 400 mm, kamuolio ilgis: 700 mm, ryšulio plotis: 350 mm, ryšulio aukštis: 500 mm, balo svoris: 40 kg, bendras plotis: 988 mm, bendras aukštis: 2 033 mm, bendras ilgis: 752 mm, įvesties srovės tipas: Oro kondicionierius, įėjimo įtampa: 230 V, bendras svoris: 380 kg, triukšmo lygis: 60 dB, galia: 1,5 kW (2,04 AG), įėjimo dažnis: 50 Hz, Pilnai veikianti ir patikrinta vertikali presavimo mašina, skirta mažiems kartono arba plastiko kiekiams presuoti. Daugiau informacijos ar nuotraukų galite gauti el. paštu arba telefonu. Gedpfx Apjvy Drxs Isuc

Būklė: naudotas, Gamybos metai: 1994, Clamping force: 600 kN Clamping platen: 460 x 460 mm Tie bar spacing: 300 x 300 mm Machine weight: approx. 4.5 t Gujdpstuxmyofx Ap Isc Clamping stroke: 230 mm Ejector force: 40 kN Ejector stroke: 70 mm Mould height: 120–350 mm Tie bar diameter: 56 mm Injection force: 55 kN Injection stroke: 130 mm Injection piston diameter: 45, 50, 55 mm Injection volume (DIN 24480): 76, 121, 165 cm³ Specific injection pressure: 345, 280, 231 kp/cm² Corresponding parting surface: 174, 214, 260 cm² Ejector withdraw stroke: 150 mm Used machine: DAW 50 as a basis for a complete overhaul, without control cabinet, furnace, or furnace cabinet. A general overhaul can be carried out at the manufacturer’s refurbishment facility. The scope of the overhaul can be agreed upon on an individual basis.

Būklė: naudotas, Gamybos metai: 1995, Clamping force: 2200 kN Clamping platen: 755x755 mm Tie bar distance: 500x500 mm Machine weight: approx. 8 t Clamping stroke: 430 mm Ejector force: 110 kN Gedpsvxlufefx Ap Isuc Ejector stroke: 100 mm Die height: 250-600 mm Tie bar diameter: 85 mm Injection force: 130 kN Injection stroke: 175 mm Injection plunger diameter: 70, 80, 90 mm Injection volume (DIN 24480): 450, 636, 856 cm³ Specific injection pressure: 335, 260, 203 kp/cm² Associated parting surface: 656, 846, 1078 cm² Withdrawal stroke: 230 mm Used die casting machine DAW 200 S with Datavario control system for processing zinc alloys. Available upon agreement. The manufacturer's recommendation is a general overhaul at a certified service center. The scope of the overhaul can be agreed upon.

Būklė: naudotas, Gamybos metai: 1999, Clamping force: 3,150 kN Clamping platen: 900x900 mm Tie bar spacing: 550x550 mm Machine weight approx. 15.5 t Clamping stroke: 500 mm Ejector force: 159 kN Ejector stroke: 120 mm Mold height: 300–700 mm Tie bar diameter: 110 mm Injection force: 158 kN Injection stroke: 250 mm Injection piston diameter: 70, 80, 90, 100 mm Casting volume (DIN 24480): 514, 791, 1105, 1455 cm³ Gsdsvfhrtopfx Ap Isuc Specific injection pressure: 410, 316, 249, 201 kp/cm² Corresponding parting surface: 768, 996, 1265, 1597 cm² Drop stroke: 300 mm Used die casting machine DAM 315 S with Datacontrol control system, configured for magnesium alloy processing. Available from stock of used machinery. The machine is equipped with a Rauch electric furnace, model MMO 315E. Spray unit not included. Manufacturer's recommendation: the machine should be repaired or overhauled at the refurbishment facility. Scope of overhaul can be agreed upon as required.

Būklė: naujas, Gamybos metai: 2024, Clamping force: 2200 kN Clamping plate: 755 x 755 mm Distance between tie bars: 500 x 500 mm Machine weight: approx. 8 t Clamping stroke: 430 mm Ejector force: 110 kN Ejector stroke: 100 mm Mould height: 250–600 mm Tie bar diameter: 85 mm Injection force: 130 kN Injection stroke: 175 mm Injection plunger diameter: 70, 80, 90 mm Injection volume (DIN 24480): 450, 636, 856 cm³ Specific injection pressure: 335, 260, 203 kp/cm² Associated parting surface: 656, 846, 1078 cm² Ejector return stroke: 230 mm Machine equipment features: 1.1.1 Motorized safety door on casting side, right 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector assistance packages 2.1.2 Core pull unit M2 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of the clamping unit 3.0.1 Casting assistance packages 3.0.1.2 Casting assistance package Technology 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-fill casting system 3.4.5 Simplified injection plunger removal 3.5.2 Electric nozzle and injection chamber heating 3.5.3 Plug-in connections for electric nozzle and injection chamber heating 4.3.1 Additional heat exchanger 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.4 Integrated water circuit control 2+8 circuits 5.1.1 Machine control DATADIALOG – Shot Stop 5.1.5 Maintenance benefit package 5.6.1 Cable lengths 6.1.3.1 Wired signal interface for part removal 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum device 6.1.7 Frech interface for doorman function 6.5.2 Equipment package RSD with switch 7.2.3.3 Spraymotion 811 E with servo drive Gujdpfevvx Hcox Ap Isc 7.2.10 Extended spray program 7.3.1 Release agent container TD 20 7.4.0.6 Spray bar CR 458

Būklė: naudotas, Gamybos metai: 1993, Maksimalus lapo plotis: 660 mm, maksimalus ilgis: 300 mm. Minimalūs lapo matmenys: 120 x 100 mm. Gaminio storis: maksimaliai 4 mm. Rietuvės ilgis: maksimaliai 80 cm. Spaudimo jėga: 8 000 N. Pateikimo aukštis: kintamas nuo 360 mm iki 960 mm. Guedpsy N Uxmjfx Ap Ijc

Būklė: naudotas, Gamybos metai: 1970, Tvirtinimas MK 4 Padavimai: taip Mašinos svoris apie 1,5 t Gjdpfxexzu Dqo Ap Iouc

Būklė: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, Cukraus paketėlių pildymo įranga Godpfszbh Spox Ap Iouc