Elumatec Sbz 122/ 71 pirkti naudotą (4 012)

Gamybos metai: 2016, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 1220099286, Maximum machining length: 4,150 mm without end face machining Maximum machining length: 4,000 mm with end face machining X-axis travel: 4,295 mm, maximum feed rate 120 m/min Y-axis travel: 910 mm, maximum feed rate 60 m/min Z-axis travel: 475 mm, feed rate 50 m/min Machining directions: 5 (top, rear, front, left, right) Positioning accuracy: +/- 0.1 mm Milling spindle power: 8 kW; S1 with recirculation (air-cooled) Milling spindle speed: max. 24,000 rpm Tool holder: HSK 63 F Tool changer: automatic Tool magazine capacity: 2 x 4 positions Automatic tool changer for angle head: 2 positions Disc cutter diameter: 120 mm Lsdpfjy Eg T Iox Aausaa Tool length (from taper): 150 mm Clamp displacement: automatic Clamps: Basic (with round guide), 6 pcs. Operating system: Windows Production software: EluSoft, EluCAM Compressed air supply: 7 bar Electrical connection: 400 V, 3 Ph, 50 Hz, 25 A Air consumption per minute: approx. 185 l with spraying Dimensions (L x W x H): 6,592 mm x 2,171 mm x 3,000 mm Weight: 2,900 kg

Gamybos metai: 2009, būklė: naudotas, 3 ašių apdirbimo centras su automatine įrankių keitimo sistema, skirtas aliuminio arba PVC profiliams Didžiausias X ašies eiga: 3 850 mm Didžiausias Y ašies eiga: 350 mm Didžiausias Z ašies eiga: 280 mm Valdymas su Windows operacine sistema, USB jungtys Apsisukimų dažnis be pakopų reguliuojamas iki 22 000 aps./min. Rankinis valdymo pultas Minimalus kiekis purškiamos alyvos Lsdpjyqyaqofx Aauoaa Įrankių keitiklis su 2 laikymo magazinais (viso 10 vietų + kampinė galva) Spaustuvų padėties atpažinimas ir perkėlimas 2 šviesos užtvarų zonos ir 2 medžiagos atramos, leidžiančios dirbti sūpynės režimu Iš viso 8 medžiagų spaustuvai Velenas geros būklės, įtraukimo jėga: 12 kN Svoris: apie 2 000 kg

Gamybos metai: 2022, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 122000029, Siūlome šį puikiai išsilaikiusį elumatec SBZ 122/75 profilių apdirbimo centrą, pagamintą 2022 m. Tipas: 122/75 Lsdjywku Tjpfx Aaujaa Serijos numeris: 122000029 Pagaminimo metai: 2022 Įtampa: 400 V Dažnis: 50/60 Hz Galingumas: 17,5 kW Srovės suvartojimas: 25 A Didžiausias variklio srovės suvartojimas: 20 A Trumpųjų jungimų atsparumas (Ik/SCCR): 5 kA Suslėgto oro spaudimas: 7 barai Svoris: 3800 kg Maksimalus profilio skersmuo: 180 mm Veleno sukimosi greitis: 6000 aps./min Maksimalus greitis: 20000 aps./min Jei turite klausimų arba reikia daugiau informacijos, parašykite mums žinutę arba paskambinkite.

Gamybos metai: 2018, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Machine Information: The machine comes from a metal construction company specializing in the production of aluminium windows, doors, and facades. It was purchased in 2018 to relieve several 5-axis machines, especially for the fabrication of aluminium entrance doors. Due to company restructuring, the machine was no longer used and became available. The machine has been thoroughly cleaned, inspected, and serviced at Weyand’s premisses. All worn parts have been replaced. Machining programs can be created either directly at the machine (eluCam) or via the included office software eluCad. Also included is the software option "Data Import Package" for ECW, NCW and V6 files, e.g. from LogiKal or Wictop. Machine Description: - Designed for efficient machining of aluminium, plastic and steel profiles - A-axis can be positioned continuously from -120° to +120° - Linear guides for clamp shifting - Improved machining results through intelligent control technology - Fast positioning of the machining unit at up to 120 m/min thanks to dynamic servo drives - Tapping without compensating chuck - Automatic clamp recognition and positioning - Automatic tool changer - 4-axis control - No reference run for main axes required, thanks to absolute encoder systems - Collision avoidance through automatic clamp detection and positioning - Power-torque milling motor with closed-loop speed control for short spindle ramp-up and braking times - Certified, drive-integrated safety functions Low energy consumption due to intelligent control technology. Energy recovery via DC bus coupling of the axis drives with feedback and buffering of braking energy of the drives. Green-Line cooling unit for the control cabinet with reduced energy consumption - Windows operating system - 15" flat-screen monitor, USB ports and network connection - Simple and convenient program entry via eluCam at the operator terminal, even during machining - Remote maintenance via TCP/IP with internet access Equipment: - Operator protection cabin Lsdpeyr H Absfx Aauoaa - Four horizontal pneumatic clamping devices - Material stop on the left - Minimum quantity lubrication - Handheld control device - Depth gauge Technical Data: - Max. machining length without end-face processing: 4,050 mm - X-axis travel: 4,176 mm, Vmax. 120 m/min - Y-axis travel: 1,040 mm, Vmax. 60 m/min - Z-axis travel: 540 mm, Vmax. 30 m/min - Machining direction 3+2 (top, rear, front) - Positioning accuracy +/- 0.1 mm - Milling spindle speed max. 20,000 rpm - Milling spindle power 7 kW, S1 (water-cooled) - Tool holder HSK-F63 - Automatic tool change - Twelve tool stations in the automatic magazine - Max. disc cutter diameter 120 mm - Max. tool length (from taper) 150 mm - Automatic clamp shifting - Basic clamp (with round guide) - Software eluCam - Compressed air connection >7 bar - Electrical connection 400 V, 50 Hz, 22 A - Air consumption per minute approx. 185 l (with spraying) Accessories (used): - Full enclosure SBZ122/7x (back wall + roof) - Complete HSK-F63 d16 L = 155 holder for disc cutter - Disc cutter D = 92x6.0mm Z = 14 d = 16, carbide-tipped - Right stop SBZ 122170171173 with 2nd clamping circuit, overlength processing - Various used tool holders and cutters - ESTA chip extraction eluCad - License for connection to eluCad - eluCad data import package for ECW, NCW and V6 files

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 12200991016, sukimosi greitis (min.): 24 000 aps./min, bendras svoris: 1 635 kg, įrankio svoris: 2 900 g, įėjimo įtampa: 400 V, For economical and efficient machining of aluminium profiles, plastics, and thin-walled steel profiles All machining processes such as milling, drilling, and tapping are performed on a stationary profile, thereby protecting the profile surface Better work results through the use of intelligent control technology Fast positioning of the machining unit at speeds of up to 60 m/min thanks to dynamic servo drives Tapping without a compensating chuck Automatic clamp detection and positioning Automatic tool magazine with four tool shelves (without tools) Modern 3-axis control Ergonomic operation thanks to a modern inclined bed Lasdpfx Aaswgmyqousa No need for axis referencing movement due to systems based on absolute encoders Collision avoidance due to automatic clamp detection and positioning Power-Torque milling spindle motor with closed-loop speed control for short spindle start-up and braking times Certified, drive-integrated safety functions Low power consumption through intelligent control technology Higher energy efficiency due to the linking of axis drives between circuits Emergency power supply (UPS) Windows operating system 15.6" Panel PC, i3 processor, USB ports and network interface Easy and convenient program input using eluCam on the operator panel, even during processing Remote online maintenance Machine equipment 8 kW air-cooled milling spindle, S1 Operator protection cabin Four horizontal pneumatic clamps for material fixation Material stop on the left side HSK-F63 tool holder Minimal quantity lubrication High-performance coolant Manual control panel Depth template Options Tools Tool holders Automatic tool magazine for up to four standard tools Automatic tool magazine for angle head Rotary angle head HSK-F63 for two tools Green-line cooling unit for the control cabinet with reduced energy consumption Barcode reader Protective cabin, optionally with full enclosure Four clamps as standard. Extension up to eight clamps possible Right material reference stop for positioning elements for overlength machining Additional stop for overlength machining on the left side Double-sided length measurement Double clamp and additional accessories on request 18.5" Panel PC, i5 processor 21.6" Panel PC, i7 processor Note holder Soundproof enclosure Chip disposal using chip trays

Gamybos metai: 2006, būklė: naudotas, 3 ašių apdirbimo centras su automatiniu įrankių keitimu aliuminio arba PVC profiliams Maks. X ašies eiga: 3 850 mm Maks. Y ašies eiga: 350 mm Maks. Z ašies eiga: 280 mm Lasdpex Ecfkjfx Aausa Valdymas E 550, apsukų bepakopis reguliavimas iki 21 000 aps./min., rankinis valdymo pultas, minimalios dozės purškimas, automatinis įrankių keitimas su žurnalu (4 vietos + kampinė galvutė) Spaustuvų aptikimas ir perkėlimas, 4 pneumatiniai medžiagos spaustuvai, šviesos užuolaida Svoris: apie 2 000 kg

Gamybos metai: 2010, būklė: naudotas, 3-axis machining center with automatic tool changer for aluminum or PVC profiles Max. X-axis travel: 6,700 mm Max. Y-axis travel: 350 mm Max. Z-axis travel: 280 mm Control: Windows 10 with a new computer installed in 2023 Continuously variable speed up to 24,000 rpm Lsdpfowwukxjx Aaueaa Handheld control device Minimum quantity lubrication Tool changer with 2 magazines (a total of 10 tool positions plus angle head) Clamp detection and clamp displacement 2 pneumatically retractable material stops and 2 light curtain zones enable pendulum operation Total of 8 material clamps Spindle in very good condition, spindle drawbar force: 12.5 kN Safety fence dismantled, demonstration possible by arrangement Weight: approx. 3,500 kg

Gamybos metai: 2010, veikimo valandos: 11 200 h, būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 12222321222, Įranga: Tipinė plokštelė prieinama, Elumatec SBZ122/33 profilių apdirbimo centras, 2010 m. Techniniai duomenys: Darbo zona X – 3850 mm, Y – 350 mm, Z – 280 mm Elektroverpetas 10 kW – maks. 20000 aps./min, atnaujintas 2023 m. (RF-HSK-F63 125/125x430 24/6,5) Įrankių laikiklis HSK-63 F Įrankių keitiklis Darbinis stalas su 4 automatiškai pozicionuojamais spaustukais Pneumatinė spaudimo operacija Šviesos barjeras Operatoriaus rankinis valdymo pultas Valdymo pultas su valdymo skydeliu USB jungtis Operacinė programinė įranga: Windows 7 Gamybinė programinė įranga – EluSoft, EluCAM Skaitmeninis valdymas – Ferrocontrol Apsauginė tvora su vartais (Laserinis saugos barjeras) Laedpfx Aasw Rv A Ujuja Automatinis ir centralizuotas linijinių kreipiančiųjų tepimas Svoris 1940 kg Bendra prijungimo galia apie 14 kW Staklių matmenys 4670 x 2000 x 2540 mm Reikalinga erdvė 5165 x 3000 x 2540 mm Staklės naudojamos aliuminio profilių apdirbimui. Aptarnautos ir paruoštos darbui.

Gamybos metai: 2010, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, SBZ 122/33 Profile Machining Center 3.8m, WK 4x90°, eluCam Description: Efficient machining of aluminum, plastic, and steel profiles Working length: 3800 mm Automatic clamp positioning Complete profile machining with stationary profile bar to protect the visible surface of the profile. Latest generation CNC 3-axis control with industrial PC running Windows XP 15" flat screen and 2 USB ports for online connectivity, barcode scanner, and label printer. Network connection: RJ 45 10/100 MBit Convenient data input via eluCam 3-D visualization Rapid positioning of the machining unit (up to 60 m/min) in the X-axis thanks to robust, low-wear direct drive. High-resolution absolute encoders eliminate the need for axis referencing Technical Data: Travel range X-axis: 3800 mm Max. traverse speed: 60 m/min Travel range Y-axis: 350 mm Max. traverse speed: 30 m/min Travel range Z-axis: 280 mm Max. traverse speed: 30 m/min Max. machining length for end machining left and right: 3700 mm Positioning accuracy: +/- 0.1 mm Milling spindle speed: 1 – 24,000 rpm Milling spindle power output: 7.0 kW S1 with spindle return Tool magazine for 6 tools (5 standard tool holders and 1 holder for rotary angle head) Tool holder: HSK F63 Included Accessories: Automatic tool changer with 6 tool positions (without tools) Protective fencing left and right Light barrier at the front 4 horizontal pneumatic material clamps Automatic clamp positioning Lajdpew Dzagjfx Aausa 1 foldable material stop Central chip extraction with collection box Dosing spray unit Milling spindle with integrated rotary unit for angle head Rotary angle head – 122 20 56 37 HSK-F63 for 2 tools UPS (uninterruptible power supply) Important: The profile machining center comes standard with front protection using a light barrier system. Side protection is provided by safety fences. Any required rear protection must be provided by the customer, or you can request our offer for safety fencing. Includes: Length measurement for profile bar Additional automatic tool changer Various used tool holders and milling cutters

Gamybos metai: 2005, būklė: naudotas, Elumatec SBZ 122 CNC Machining Centre, year of manufacture 2005, designed for machining aluminium profiles for windows, curtain walls, and light metalwork. A robust and reliable industrial machine, renowned for its machining precision and continuous operation. Key features: 3-axis CNC machining centre High-rigidity steel frame Vertical spindle for milling, drilling, and complex machining tasks Worktable equipped with pneumatic clamps for secure and precise profile clamping Wide-travel longitudinal axis, ideal for processing long profiles Protective enclosure with chip extraction/management system Elumatec CNC control unit Ideal for medium to high production volumes and repetitive operations Applications: Milling operations Drilling Slotting End and face machining Production of aluminium frames and special profiles Main data: Brand: Elumatec Model: SBZ 122 Year of manufacture: 2005 Condition: Used Status: Machine in good overall condition From industrial environment Available for inspection while operational by appointment Included equipment: Complete worktable Pneumatic clamping system Control panel Laedsyg Ht Ajpfx Aauoa Original guards and covers

Būklė: reikia remonto (naudotas), Gamybos metai: 2000, Parduodamas Elumatec SBZ 610 pjovimo ir apdirbimo centras. Įrenginys buvo iš anksto paleistas. Reikalingas remontas. Lodpfx Aasy Avyleujaa

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Įrenginys labai geros būklės. Ilgis 7,6 metro, 2 darbo vietos. Galima suteikti iki 6 mėnesių garantiją. Laedeyia Ezopfx Aauea

Gamybos metai: 2005, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, elumatec SBZ150 Profile Machining Center 6.0m 5-axis control. Efficient machining of aluminum and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter Ø 50 mm, angle head or special cutter up to Ø 100 mm); Six-sided machining; From below with angle head (option); Rapid base positioning (up to 60 m/min) of the machining unit on the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Two-circuit clamping system with two pneumatically swiveling stops; Standard with automatic central lubrication system; Robust machine bed for working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row roller recirculating units and linear guides. 5-axis industrial PC control, of which 3 axes for path control; Highly dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes are freely programmable; With color display and floppy disk drive; Storage capacity for over 200,000 programs; 3 serial and 1 parallel interface for online connection; barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 connection (network connection by customer’s administrator) Lsdpfxjw A Rv Ij Aaueaa Analog modem (customer must provide analog telephone line) Technical Data: Travel range X-axis: max 6,240 mm Max. travel speed 60 m/min Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable Further details on milling area see drawing no. 150 05 17 08 Max. machining length for face machining left+right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling Spindle: Speed [1/min]: up to 100-22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: max. 100 mm Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper length Included Accessories: Automatic tool changer (without tool holders) Two-circuit clamping system with 2 pneumatically swiveling material stops Automatic clamp detection and positioning 8 horizontal pneumatic material clamping devices Tool setting gauge Front light barrier Saw blade Ø400 with mount Angle milling head Important: The profile machining center is equipped as standard with a front safety light barrier. Any required lateral and rear safety fencing must be provided by the customer or please request our offer for protective fences. Incl.: Angle milling head for machining from below

Būklė: paruoštas naudoti (naudotas), Parduodamas Elumatec 4 ašių CNC strypų apdirbimo centras. Versija: 7,8 m, eigos kelias X/Y/Z: 7720 mm/845 mm/620 mm, didžiausias apdirbimo ilgis iš galo/ne iš galo: 7720 mm/7600 mm, padėties nustatymo tikslumas: +/-0,1 mm/m, didžiausias veleno greitis: 24 000 aps./min, įrankio laikiklis: HSK-63F, įrankių vietų: 8, spaudimo įtaisai: 8, įrenginio matmenys X/Y/Z: apie 11 250 mm/3400 mm/2950 mm, svoris: apie 7 400 kg, darbo valandos pagal gamybos planavimo sistemą: apie 42 200 h. Įrenginys neturi valandų skaitiklio. Yra dokumentacija. Galima apžiūra vietoje. Ledpfx Aajy Aafxeueaa

Gamybos metai: 2014, būklė: labai geros būklės (naudotas), Elumatec SBZ 130 is a 3-axis profile machining center designed for efficient processing of aluminum, steel, and stainless steel profiles. All operations such as milling, drilling, and tapping are performed on a stationary profile, which protects its surface. Axes: 3-axis control, with a tool spindle as an additional axis. Machining length (X axis): 7,200 mm Lajdpfx Aasyt H Uyouoa Travel (Y axis): Typically 485 mm (Vmax. 60 m/min). Travel (Z axis): Typically 340 mm (Vmax. 60 m/min). Spindle speed: Standard 6,000 rpm or optionally high-speed spindle (18,000 rpm). Spindle power: 5.5 kW. Tool magazine: Integrated turret head for 8 tools or 4 angle heads, ensuring short tool change times. Control: Windows operating system with eluCam software. 18.5” PC panel with USB ports and network connection. Clamping system: Automatic positioning of pneumatic clamps. Compressed air supply: 7 bar. MACHINE: Includes tooling dedicated for PVC + STEEL processing - tool holders, - reducer for steel machining, - special tools with chip breakers, - programs dedicated to processing door profile systems,

Gamybos metai: 2014, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1400040685, Special features: - Retrofit to WIN10 – NEW – with 6-month warranty on PC and UPS - WATER-COOLED spindle 9.5 kW S1 - 3-layer machining possible - Thoroughly cleaned and overhauled – EXCELLENT condition Description: - Graphical user interface and graphical service support - A-axis for stepless machining from above – swiveling angle 180° - HSC milling spindle for speeds up to 24,000 rpm - Large machining width - Standard with clamp detection and automatic clamp positioning - 8 tool stations - Complete profile machining with stationary profile bar - Rapid basic positioning of the machining unit (up to 64 m/min) in the X axis - Robust and low-wear direct drive - Protective hood - Digital axis controllers for all 4 axes with high-resolution measuring system - 4-axis industrial PC control - 2 1/2 D interpolation - 15" TFT color display - Network connection RJ45 10/100 Mbit - Hard disk - Full PC keyboard - Remote maintenance via TCP/IP (requirement: internet access) Technical data: - Max. machining length without end machining: 7,600 mm - Max. machining length with end machining: 7,500 mm (tool-dependent) - Travel distance X axis: 7,700 mm Laodpfxey Ah Tkj Aauoa - Travel speed X axis: 65 m/min - Travel distance Y axis: 850 mm - Travel speed Y axis: 60 m/min - Travel distance Z axis: 650 mm - Travel speed Z axis: 60 m/min - Swivel angle A axis freely programmable in increments of 0.1°: 0 - 180° - Positioning accuracy: - X axis: +/- 0.1 mm / 1 m - Y axis: +/- 0.1 mm - Z axis: +/- 0.1 mm - A axis: +/- 0.1° - Max. spindle speed: 24,000 rpm - Max. spindle power: 9.5 kW S1 - Tool holder: HSK F 63 - Max. milling cutter diameter: 80 mm - Max. disc cutter diameter: 200 mm - Compressed air connection: > 7 bar - Voltage: 400 V, 3 phase, 50 Hz - Fuse protection: 35 A - 8 tool stations Included accessories: - Tool setting gauge - 8 pneumatic material clamps - Automatic clamp detection - Dosing spray device - Protective hood - Front light barrier - Left and right protective fence - Central chip extraction - 2 pneumatic material stops - 3-circuit clamping system - Length measurement for profile bar - Barcode scanner with wireless transmission - Special version with light barrier Additional options available upon request: - Programming software (office) eluCad, including 6-month hotline contract - 3D import license for a machine of category "L" - Data import package license for a machine of category "L" - CSV import license for a machine of category "L" - Macros hashing license for a machine of category "L" Other information: The machine will be handed over ready for transport, including transport locks and loading onto a truck. Additionally, we can optionally offer the following services upon request: - Installation and commissioning - Machine instruction - 4/5-axis instruction package for machine and eluCad

Būklė: geras (naudotas), Gamybos metai: 2004, mašinos/transporto priemonės numeris: 1400040151, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo srovė: 24 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, CNC apdirbimo centras Elumatec SBZ140 Pagaminimo metai: 2004 Gamintojas: ELUMATEC Įrenginys yra geros techninės būklės. Parduodama dėl naujos mašinos įsigijimo. Ledjyr Axxepfx Aausaa

Gamybos metai: 2002, būklė: reikia remonto (naudotas), Funkcionalumas: ribota funkcionalumas, mašinos/transporto priemonės numeris: 1300030418, Parduodamas CNC apdirbimo centras aliuminio ir plieno profiliams Elumatec SBZ 130. Įrenginys priklauso įmonei ir yra laikomas uždarame gamybos ceche, apsaugotas nuo išorės poveikio. Specifikacija ir būklė: Laedjyz Dvrepfx Aauea Metai: 2002 Statusas: Šiuo metu neveikiantis (reikalinga pneumatikos priežiūra). Istorija: Įrenginys naudotas iki 2014 m., vėliau laikytas sandėlyje gamybinėje salėje. Elektronika: Kompiuteris visiškai veikiantis, galima įjungti įrenginį sistemos patikrai. Reikalingos investicijos: Visiškas pneumatinių žarnų keitimas ir valdymo blokų patikra/aptarnavimas. Privalumai: Įrenginys mechaniškai tvarkingas, nestovėjo lauke. Puiki galimybė įmonėms, turinčioms techninius pajėgumus remontui, ar ieškančioms patikimo pagrindo modernizacijai.

Gamybos metai: 2007, būklė: paruoštas naudoti (naudotas), For Sale: CNC Machining Centre – Elumatec SBZ 130 Manufacturer: Elumatec Model: SBZ 130 Year of manufacture: 08/2007 Price: 29,000 EUR excl. VAT Condition: Very good, regularly serviced by authorized Elumatec service in the Czech Republic Availability: Immediately available Documentation: Photos and video of the machine available Lodpeyt E D Tsfx Aauoaa Machine Description 3-axis CNC machining centre designed for processing aluminium and steel profiles. The machine enables efficient batch production thanks to the pendulum machining mode (right/left working zone). Especially suitable for manufacturing window, door, and façade systems. Key Advantages - Machine has been regularly serviced by authorized Elumatec service in the Czech Republic - Robust and reliable construction with an approximate weight of 5.5 t ensures stable and precise machining - Pendulum machining mode enables a significant increase in production productivity - The machining centre is fully operational and ready for immediate deployment Technical Specifications - Number of axes: 3 - Tool magazine: turret head for 8 tools - Maximum machining length: 6500 mm - Pendulum machining mode: yes (right / left side) - Automatic positioning clamps: 8 pcs - Power consumption: 8.5 kW - Spindle power: 5.5 kW - Max. spindle speed: 6000 rpm - Clamping pressure: 7 bar - Feed speed: - X axis: 34 m/min - Y and Z axes: 18 m/min - Machine weight: approx. 5.5 t Additional Information - Additional photos and video of the machine available on request - Inspection possible by prior arrangement

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2010, X ašies eiga: 4 200 mm, Y ašies eiga: 485 mm, Z ašies eigos atstumas: 340 mm, bendras aukštis: 2 000 mm, bendras plotis: 1 600 mm, bendras svoris: 5 500 kg, veleno greitis (maks.): 6 000 aps./min, ašies variklio galia: 6 000 W, gaminio ilgis (maks.): 7 500 mm, ašių skaičius: 3, Šis 3 ašių "Elumatec SBZ 131" buvo pagamintas 2010 m. Jo X ašies eiga - 4200 mm, Y ašies eiga - 485 mm, o Z ašies eiga - 340 mm. Staklėse yra 8 padėčių besisukanti įrankių galvutė, o didžiausias suklio greitis - 6000 aps/min. Jei ieškote aukštos kokybės profilių apdirbimo galimybių, apsvarstykite mūsų parduodamą "Elumatec SBZ 131" CNC profilių apdirbimo centrą. Susisiekite su mumis dėl išsamesnės informacijos. • Kontrolė: Pramoninis kompiuteris su "eluCam" programine įranga; 15 colių spalvotas monitorius • Reversas / įrankių keitimas: 8 padėčių besisukanti revolverinė galvutė su 8 padėčių įrankių keitikliu • Greita eiga: X 60 m/min; Y 30 m/min; Z 30 m/min Lasdpoyt Ifyefx Aauja • Įrankių sąsaja: BT30 • Įvorių sistemos: ER25 / ER32 • Pjūklo skersmuo: apie 300-420 mm Technical Specification Taper Size BT 30

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, X ašies eiga: 4 200 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 300 mm, bendras svoris: 9 000 kg, veleno greitis (maks.): 6 000 aps./min, ašies variklio galia: 5 500 W, ašių skaičius: 3, Šis 3 ašių "Elumatec SBZ 130" buvo pagamintas 2007 m. Didžiausias apdirbimo ilgis yra apie 4200 mm, o patikima Y ašies eiga - 400 mm. Greitaeigis frezavimo velenas veikia didžiausiu 6000 aps/min greičiu, jam padeda 8 padėčių revolverinės galvutės įrankių keitiklis. Jei ieškote aukštos kokybės profilių apdirbimo galimybių, apsvarstykite mūsų parduodamą "Elumatec SBZ 130" CNC profilių apdirbimo centrą. Susisiekite su mumis dėl išsamesnės informacijos. • Valdymo sistema: Ferrocontrol CNC • Maksimalus apdirbimo ilgis: apie 4200 mm • Apdorojimo ilgis su galiniu apdirbimu: apie 4080 mm • Suklys: Laodpfx Aaoyt Hg Nsuea • Spindulys: Tipas: Spartusis frezavimo suklys: greitaeigis frezavimo suklys • Įrankių sistema: • Įrankių keitimo sistema: Įrankių keitiklis: Įrankis: revolverinė galvutė • Įrankių padėtys: 8

Būklė: naudotas, Gamybos metai: 2019, ELUMATEC - SBZ 140 ELUCAM - 2019 - 4 ašys - X/Y/Z eigos: 7400-7600/850/650 mm - A ašis 0-180 laipsnių - Greiti judesiai 60-65 m/min - Velenas 24,000 aps./min., 11 kW S1 Ledpfx Ajyl Shvjaueaa - ATC 8 pozicijų - 2442 veleno pjovimo valandos - Prijungtas prie elektros - Labai gera būklė

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 6 450 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 380 mm, sukimosi greitis (maks.): 6 000 aps./min, įrankio skersmuo: 80 mm, TECHNINĖ INFORMACIJA Lasdpfxeyg D A Is Aausa Judėjimo eiga, X ašis: 6 450 mm Judėjimo eiga, Y ašis: 400 mm Judėjimo eiga, Z ašis: 380 mm Apdirbimo ilgis: 6 500 mm Įrankių skaičius: 8 vnt. Įrankio tvirtinimas: BT30 Įrankio keitimo laikas: 1,2 s Maks. įrankio skersmuo: 80 mm Sukimosi greitis: 6 000 aps./min. X padavimo greitis: 34 m/min Y+Z padavimo greitis: 18 m/min STAKLIŲ DUOMENYS Bendras galingumo poreikis: 8,5 kW Matmenys ir svoris Išmatavimai: 9 800 x 3 000 x 2 400/3 300 mm Svoris: 5 400 kg

Gamybos metai: 2020, veikimo valandos: 1 288 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, 4-axis CNC profile machining center For economical and efficient machining of aluminum and thin-walled steel profiles. Standard configuration with air-cooled milling spindle (optionally available with water-cooled spindle). All operations such as milling, drilling, and tapping are carried out on a stationary clamped profile. Stepless machining between -90° and +90° with any available tool. Automatic clamp adjustment with absolute measuring system. The moving tool magazine ensures short tool change times, leading to optimized machining cycles. The magazine can be equipped with eight tools. For double profile and end machining, a maximum of two rotatable angle heads with two different tools each are available (0° – 90° – 180° – 270°) (option). Two separate machining zones for pendulum operation (optional). Area protection is provided by a laser scanner on the operator side for maximum safety and easy machine accessibility. 4-axis control 18.5" color monitor, USB ports, and network connection Windows-based eluCam operating system SBZ 140 – 7.6 m Ljdewxmdtjpfx Aaueaa Max. machining length with end machining: 7,600 mm Max. machining length without end machining: 7,720 mm

Gamybos metai: 2010, būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, X ašies eiga: 8 500 mm, Y ašies eiga: 480 mm, Z ašies eigos atstumas: 325 mm, sukimosi greitis (maks.): 15 000 aps./min, Nėra minimalios kainos – garantuotas pardavimas didžiausią kainą pasiūliusiam! Lsdpjypbmiofx Aauoaa TECHNINIAI DUOMENYS X ašies eiga: 8 500 mm Y ašies eiga: 480 mm Z ašies eiga: 325 mm Didž. sūkiai: 15 000 aps./min. Velenas: 5,5 kW Įrankio tvirtinimas: BT 30 STAKLIŲ DUOMENYS Įrankių keitiklis: 8 pozicijų ĮRANGA Įrankiai