Elumatec SBZ 122/73, įskaitant eluCad

elumatec AG SBZ 122/73

Machine Information:

The machine comes from a metal construction company specializing in the production of aluminium windows, doors, and facades. It was purchased in 2018 to relieve several 5-axis machines, especially for the fabrication of aluminium entrance doors. Due to company restructuring, the machine was no longer used and became available.

The machine has been thoroughly cleaned, inspected, and serviced at Weyand’s premisses. All worn parts have been replaced.

Machining programs can be created either directly at the machine (eluCam) or via the included office software eluCad. Also included is the software option "Data Import Package" for ECW, NCW and V6 files, e.g. from LogiKal or Wictop.

Machine Description:

- Designed for efficient machining of aluminium, plastic and steel profiles
- A-axis can be positioned continuously from -120° to +120°
- Linear guides for clamp shifting
- Improved machining results through intelligent control technology
- Fast positioning of the machining unit at up to 120 m/min thanks to dynamic servo drives
Klsdpfxsyr H Abo Afneu
- Tapping without compensating chuck
- Automatic clamp recognition and positioning
- Automatic tool changer
- 4-axis control
- No reference run for main axes required, thanks to absolute encoder systems
- Collision avoidance through automatic clamp detection and positioning
- Power-torque milling motor with closed-loop speed control for short spindle ramp-up and braking times
- Certified, drive-integrated safety functions

Low energy consumption due to intelligent control technology. Energy recovery via DC bus coupling of the axis drives with feedback and buffering of braking energy of the drives.

Green-Line cooling unit for the control cabinet with reduced energy consumption

- Windows operating system
- 15" flat-screen monitor, USB ports and network connection
- Simple and convenient program entry via eluCam at the operator terminal, even during machining
- Remote maintenance via TCP/IP with internet access

Equipment:
- Operator protection cabin
- Four horizontal pneumatic clamping devices
- Material stop on the left
- Minimum quantity lubrication
- Handheld control device
- Depth gauge

Technical Data:
- Max. machining length without end-face processing: 4,050 mm
- X-axis travel: 4,176 mm, Vmax. 120 m/min
- Y-axis travel: 1,040 mm, Vmax. 60 m/min
- Z-axis travel: 540 mm, Vmax. 30 m/min
- Machining direction 3+2 (top, rear, front)
- Positioning accuracy +/- 0.1 mm
- Milling spindle speed max. 20,000 rpm
- Milling spindle power 7 kW, S1 (water-cooled)
- Tool holder HSK-F63
- Automatic tool change
- Twelve tool stations in the automatic magazine
- Max. disc cutter diameter 120 mm
- Max. tool length (from taper) 150 mm
- Automatic clamp shifting
- Basic clamp (with round guide)
- Software eluCam

- Compressed air connection >7 bar
- Electrical connection 400 V, 50 Hz, 22 A
- Air consumption per minute approx. 185 l (with spraying)

Accessories (used):
- Full enclosure SBZ122/7x (back wall + roof)
- Complete HSK-F63 d16 L = 155 holder for disc cutter
- Disc cutter D = 92x6.0mm Z = 14 d = 16, carbide-tipped
- Right stop SBZ 122170171173 with 2nd clamping circuit, overlength processing
- Various used tool holders and cutters
- ESTA chip extraction

eluCad
- License for connection to eluCad
- eluCad data import package for ECW, NCW and V6 files

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.