Apdirbimo centras Elumatec SBZ 122

Elumatec SBZ 122

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 12200991016, sukimosi greitis (min.): 24 000 aps./min, bendras svoris: 1 635 kg, įrankio svoris: 2 900 g, įėjimo įtampa: 400 V, For economical and efficient machining of aluminium profiles, plastics, and thin-walled steel profiles All machining processes such as milling, drilling, and tapping are performed on a stationary profile, thereby protecting the profile surface Better work results through the use of intelligent control technology Fast positioning of the machining unit at speeds of up to 60 m/min thanks to dynamic servo drives Tapping without a compensating chuck Automatic clamp detection and positioning Automatic tool magazine with four tool shelves (without tools) Hfjdpswgmyqjfx Abmer Modern 3-axis control Ergonomic operation thanks to a modern inclined bed No need for axis referencing movement due to systems based on absolute encoders Collision avoidance due to automatic clamp detection and positioning Power-Torque milling spindle motor with closed-loop speed control for short spindle start-up and braking times Certified, drive-integrated safety functions Low power consumption through intelligent control technology Higher energy efficiency due to the linking of axis drives between circuits Emergency power supply (UPS) Windows operating system 15.6" Panel PC, i3 processor, USB ports and network interface Easy and convenient program input using eluCam on the operator panel, even during processing Remote online maintenance Machine equipment 8 kW air-cooled milling spindle, S1 Operator protection cabin Four horizontal pneumatic clamps for material fixation Material stop on the left side HSK-F63 tool holder Minimal quantity lubrication High-performance coolant Manual control panel Depth template Options Tools Tool holders Automatic tool magazine for up to four standard tools Automatic tool magazine for angle head Rotary angle head HSK-F63 for two tools Green-line cooling unit for the control cabinet with reduced energy consumption Barcode reader Protective cabin, optionally with full enclosure Four clamps as standard. Extension up to eight clamps possible Right material reference stop for positioning elements for overlength machining Additional stop for overlength machining on the left side Double-sided length measurement Double clamp and additional accessories on request 18.5" Panel PC, i5 processor 21.6" Panel PC, i7 processor Note holder Soundproof enclosure Chip disposal using chip trays

Sąlyga: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: SÇ 431 Alüminyum Pvc Manuel Üstten Kesim Makinesi, • Complies with CE standards. • The machine can cut at +45, -45 and intermediate angles. • Quick-stop bumpers for 90, 75, 60, and 45 degrees. • Table locking lever for intermediate angles. • Profile clamping is pneumatic and performed efficiently. • Diamond saw blade diameter is Ø400 mm. • Equipped as standard with measuring and transport conveyors (2.5 meters each on right and left). OPTIONAL Hfedpfjramzujx Abmer • Cooling unit for cutting aluminum profiles • Roller conveyor system (3 meters each on right and left)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, Parduodame CNC stakles. Kaina: 36 000. Hfsdow Rnl Ispfx Abmjr Taip pat turime visą liniją PVC ir aliuminio langų bei durų gamybai.

Gamybos metai: 2007, Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Įranga: CE žymėjimas, Zum Verkauf: Elumatec SBZ 122/10-30 CNC-Profilbearbeitungszentrum (Baujahr 2007) Das Elumatec SBZ 122/10-30 ist ein zuverlässiges und vielseitiges CNC-Bearbeitungszentrum für die Verarbeitung von Aluminium-, PVC- und dünnwandigen Stahlprofilen. Dieses Modell aus dem Jahr 2007 bietet präzise CNC-Steuerung in 3 Achsen kombiniert mit einem schwenkbaren Winkelkopf, wodurch eine Bearbeitung von fünf Profilseiten ohne Umspannen möglich ist. Dank seiner robusten Bauweise, bewährter Elumatec-Technologie und automatischem Werkzeugwechsler ist das SBZ 122/10-30 nach wie vor eine wertvolle Maschine für Anwendungen in der Fenster-, Türen-, Fassaden- sowie allgemeinen Profilbearbeitung. 🔧 Technische Daten Baujahr: 2007 Achsen: 3 CNC-gesteuert (X, Y, Z) Bearbeitungsbereich: X-Achse: ca. 3.850 mm Y-Achse: ca. 350 mm Z-Achse: ca. 280 mm Maximale Profillänge: Ohne Stirnbearbeitung: ca. 3.750 mm Mit Stirnbearbeitung: ca. 3.650 mm Spindelleistung: ca. 6 kW (S6) Spindeldrehzahl: bis zu 21.000 U/min Werkzeugsystem: HSK-F63 Werkzeugwechsler: 4 Plätze + Winkelkopf (insgesamt 5 Werkzeuge) Wiederholgenauigkeit: ±0,1 mm 📐 Abmessungen & Gewicht Hfodpsw Syy Tsfx Abmsr Maschinenabmessungen (L × B × H): ca. 4.600 × 3.230 × 2.420 mm Gewicht: ca. 1.690 kg 💻 Steuerung PC-basierte CNC-Steuerung (Windows-Umgebung) Programmierung über Elusoft Automatisches Spannsystem für sichere und flexible Profilpositionierung ✅ Highlights: Fünfseitenbearbeitung ohne manuelles Umspannen Automatischer Werkzeugwechsel für höhere Effizienz Geeignet für Aluminium-, PVC- und Leichtstahlprofile Bewährtes Elumatec-Design für langlebige Leistung

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Condition of the machine is very good, it has performed only 123,000 operations. CNC-controlled automatic machine, designed for processing welded frames. Independent drive and control system. Multiple use of the same processing time Hedpfxem Ak R Us Abmsfr Operates in a welding and cleaning line Does not require additional floor space in the hall Can be adapted to work in a sash production line All operations are performed during the cooling phase: drainage vent grooves vent holes in colored profiles drilling of frame for mullion connector drilling of holes in the frame for hinges (x6) The center has its own frame transportation system from welder to cleaner SPS, NC control User-friendly visualization

Sąlyga: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1223030252, Modelis: SBZ 122/30 Pagaminimo metai: 2009 Valdymas: CNC valdymas 3 ašių profilių apdirbimas Tinka: aliuminio, PVC ir plonasieniams plieno profiliams Įrenginys labai geros techninės būklės Reguliariai prižiūrimas Paruoštas naudojimui iš karto Hfodpfxjxyv Afj Abmsr Pristatymo komplektacija Pilnas SBZ 122/30 įrenginys Originali valdymo pultas Tvirtinimo įranga Priedai pagal susitarimą Apžiūrėti gyvai galima susitarus dėl laiko.

Gamybos metai: 2010, Sąlyga: naudotas, 3-axis machining center with automatic tool changer for aluminum or PVC profiles Max. X-axis travel: 6,700 mm Max. Y-axis travel: 350 mm Max. Z-axis travel: 280 mm Control: Windows 10 with a new computer installed in 2023 Hodpfswwukxjx Abmsfr Continuously variable speed up to 24,000 rpm Handheld control device Minimum quantity lubrication Tool changer with 2 magazines (a total of 10 tool positions plus angle head) Clamp detection and clamp displacement 2 pneumatically retractable material stops and 2 light curtain zones enable pendulum operation Total of 8 material clamps Spindle in very good condition, spindle drawbar force: 12.5 kN Safety fence dismantled, demonstration possible by arrangement Weight: approx. 3,500 kg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1500050209, juostos ilgis: 12 000 mm, Strypų apdirbimo centras buvo įsigytas 2022 m. dalinio įmonės perėmimo metu. Šiam pirkiniui pirminis savininkas parengė vertinimą. (Vertinimas pridedamas) Per pastaruosius trejus metus įrenginys beveik nebuvo naudojamas, nes turime dar 2 apdirbimo centrus. Hjdpfx Abexlq Rbsmefr Strypų apdirbimo centras tiesiai iš gamyklos (galima bet kada išrinkti ir pasiimti)

Gamybos metai: 2006, Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Technical information - Elumatec SBZ 122/20 year 2006 16KW General data Width: 4622.8 mm Depth: 1828.8 mm Height: 2489.2 mm Machine weight: 1814.9 kg Main drive Spindle speed range: 21000 rpm Spindle motor power: 8.5 HP Travel X-AXIS travel: 3777 mm Y-AXIS travel: 350.5 mm Z-AXIS travel: 279.4 mm Machine can be seen in operation, located in department 76 Available from week S38/S39 Hfjdpfx Ajw A Ipfsbmsr Price includes loading

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1222021152, X ašies eiga: 3 500 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 280 mm, Rationales Bearbeiten von Aluminium-, Kunststoff- und Stahlprofilen 3-Achsen-Steuerung - Bearbeitungslänge 3500 mm. Durchgehender Spannbereich ermöglicht das Spannen von Profilen bis zu 7 Meter Länge mit Unterstützung durch Rollenbahn. - Einfache grafische Bedienerführung. - Automatische Steuerung der Spannposition. - Automatische Profillängenmessung. - 1-Kreis-Spannsystem. - Durchgehende Maschinenbettfläche. - Komplette Bearbeitung der Profile im stationären Zustand verhindert Beschädigungen der Profile. - Schnelle Positionierung der Bearbeitungseinheit (bis zu 50 m/min) in der X-Achse sorgt für einen robusten Antrieb mit minimalem Verschleiß. - Hochdynamische Servoantriebe mit Messeinrichtung und digitalem Servoregler. - Elektronische 3-Achsen-Industrie-PC-Steuerung, Farbmonitor und Diskettenlaufwerk für Online-Anbindung, Barcodescanner. Netzwerkanschluss R3 45 10/100 Mbit - Maschinen-Nr.: 1222021152, Baujahr 2007 Bearbeitungslänge: Standard 3500 mm Fräsbereich X-Achse: 3500 mm (ohne Stirnseitenbearbeitung) Fräsbereich Y-Achse: 350 mm Fräsbereich Z-Achse: 280 mm Eilgang Y-Z: max. 30 m/min Eilgang X-Achse: max. 50 m/min Positioniergenauigkeit: +/- 0,1 mm Fräsgeschwindigkeit: 1 – 21.000 1/min Fräsmotorleistung: 6,0 kW S6 Werkzeugwechsler Wir bieten professionelle Montage und Bedienerschulung an. Hfedpfxjw Tm Rhj Abmsr

Gamybos metai: 2025, Sąlyga: naujas, mašinos/transporto priemonės numeris: SÇ 5000 S ALÜMİNYUM PVC 3 EKSEN CNC FREZE MAKİNESİ, • Complies with CE standards • Machine capable of performing door, sash, handle barrel, and triple drilling operations for aluminum and PVC profiles • CNC control with 10" touchscreen display • 3 independent axes (AXIS) • Cooling system for aluminum profiles • Right and left handle, and measuring stop system • High precision operation via linear guide system • Adjustable speed settings for all operations • Easy switch between aluminum and PVC profile settings with speed adjustments automatically updated via the touchscreen • Unlimited memory capacity Hfsdpora Nybsfx Abmjr • Automatic safety cover for operator protection • Servo motor system on X, Y, and Z axes

Gamybos metai: 2010, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, SBZ 122/33 Profile Machining Center 3.8m, WK 4x90°, eluCam Description: Efficient machining of aluminum, plastic, and steel profiles Working length: 3800 mm Automatic clamp positioning Complete profile machining with stationary profile bar to protect the visible surface of the profile. Hsdpsw Dzagsfx Abmjfr Latest generation CNC 3-axis control with industrial PC running Windows XP 15" flat screen and 2 USB ports for online connectivity, barcode scanner, and label printer. Network connection: RJ 45 10/100 MBit Convenient data input via eluCam 3-D visualization Rapid positioning of the machining unit (up to 60 m/min) in the X-axis thanks to robust, low-wear direct drive. High-resolution absolute encoders eliminate the need for axis referencing Technical Data: Travel range X-axis: 3800 mm Max. traverse speed: 60 m/min Travel range Y-axis: 350 mm Max. traverse speed: 30 m/min Travel range Z-axis: 280 mm Max. traverse speed: 30 m/min Max. machining length for end machining left and right: 3700 mm Positioning accuracy: +/- 0.1 mm Milling spindle speed: 1 – 24,000 rpm Milling spindle power output: 7.0 kW S1 with spindle return Tool magazine for 6 tools (5 standard tool holders and 1 holder for rotary angle head) Tool holder: HSK F63 Included Accessories: Automatic tool changer with 6 tool positions (without tools) Protective fencing left and right Light barrier at the front 4 horizontal pneumatic material clamps Automatic clamp positioning 1 foldable material stop Central chip extraction with collection box Dosing spray unit Milling spindle with integrated rotary unit for angle head Rotary angle head – 122 20 56 37 HSK-F63 for 2 tools UPS (uninterruptible power supply) Important: The profile machining center comes standard with front protection using a light barrier system. Side protection is provided by safety fences. Any required rear protection must be provided by the customer, or you can request our offer for safety fencing. Includes: Length measurement for profile bar Additional automatic tool changer Various used tool holders and milling cutters

Gamybos metai: 2010, veikimo valandos: 11 200 h, Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 12222321222, Įranga: Tipinė plokštelė prieinama, Elumatec SBZ122/33 profilių apdirbimo centras, 2010 m. Techniniai duomenys: Darbo zona X – 3850 mm, Y – 350 mm, Z – 280 mm Elektroverpetas 10 kW – maks. 20000 aps./min, atnaujintas 2023 m. (RF-HSK-F63 125/125x430 24/6,5) Įrankių laikiklis HSK-63 F Įrankių keitiklis Darbinis stalas su 4 automatiškai pozicionuojamais spaustukais Pneumatinė spaudimo operacija Hsdpfx Absw Rv A Ujmefr Šviesos barjeras Operatoriaus rankinis valdymo pultas Valdymo pultas su valdymo skydeliu USB jungtis Operacinė programinė įranga: Windows 7 Gamybinė programinė įranga – EluSoft, EluCAM Skaitmeninis valdymas – Ferrocontrol Apsauginė tvora su vartais (Laserinis saugos barjeras) Automatinis ir centralizuotas linijinių kreipiančiųjų tepimas Svoris 1940 kg Bendra prijungimo galia apie 14 kW Staklių matmenys 4670 x 2000 x 2540 mm Reikalinga erdvė 5165 x 3000 x 2540 mm Staklės naudojamos aliuminio profilių apdirbimui. Aptarnautos ir paruoštos darbui.

Gamybos metai: 2024, Sąlyga: naudotas, Cutting width: 180 mm Cutting height: Ø140 mm Motor power: 2.2 kW Cutting height at 45°: Ø120 mm Dimensions (L/W/H): 700x950x1750 mm Machine weight: approx. 180 kg 2x horizontal vices Hfjdpfxovnwfuj Abmsr Mist spray device and carbide-tipped saw blade Mitre angle engraved Self-braking motor in under 10 seconds Servo-pneumatic manual lowering

Sąlyga: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 122009984, X ašies eiga: 3 850 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 280 mm, sukimosi greitis (maks.): 24 000 aps./min, įrankių magazino lizdų skaičius: 8, No reserve price – guaranteed sale to the highest bidder! For milling, drilling, and thread cutting operations on aluminium, PVC, and thin-walled steel profiles for applications in window, façade, and metal construction! Hsdpfx Asvyg Szsbmjfr CONDITION Spindle: Newly fitted bearings Frequency inverter: Recently replaced Tool changer: Automatic tool changer requires a new sensor – minor effort TECHNICAL DETAILS Fields of application: Aluminium, PVC, and steel machining Software/control: EluCam software, PC-based Machining area Travel X-axis: 3,850 mm Travel Y-axis: 350 mm Travel Z-axis: 280 mm Feed rates (rapid traverse) X-axis: 60 m/min Y-axis: 30 m/min Z-axis: 30 m/min Spindle Power: 7 kW Max. speed: 24,000 rpm Tool holder: HSK-F63 angle head (as new, hardly used) Tool changer Type: Automatic tool changer Stations: 8 Vices Quantity: 12 pneumatic double vices Safety features Included: Light barrier and safety fence MACHINE DETAILS Machine weight: approx. 2,000 kg Dimensions: approx. 5.1 x 3.4 x 2.6 m