Dviejų Dalių Mašinos Veržlė pirkti naudotą (44 420)

Būklė: naujas, Gamybos metai: 2026, Properties and application The body and movable jaw are made of high-quality cast iron Replaceable, serrated jaw inserts, induction hardened and ground Iodpfxevxgq Uj Aauoar The use of a thrust bearing increases the efficiency of the clamping mechanism Designed for clamping long workpieces using the full length of the machine table Equipment included: handle, positioning keys

Būklė: naujas, Gamybos metai: 2026, Properties and Applications - The body and movable jaw are made of high-quality cast iron - Replaceable, serrated jaw inserts, induction-hardened and ground - The use of a thrust bearing increases the efficiency of the clamping mechanism - Designed for clamping long workpieces using the full length of the machine table - Equipment: handle, positioning keys - Bolt spacing range: 135 - 180 mm, slot width: 18 mm. Iodpsvxgp Djfx Aauoar

Gamybos metai: 2021, būklė: geras (naudotas), angapė apie 60x20 cm. Su metaline transportavimo juosta Ijdpfx Aajyzy Ikjusar

Būklė: labai geros būklės (naudotas), 363 NAUDOTA bandelių dalijimo ir apvalinimo mašina Fortuna KM - automatinė. TECHNINIAI DUOMENYS: Isdpfxey Amc Rs Aauoar - dalijimo ir apvalinimo svoris: 35-80 g. Įrenginys paruoštas apžiūrai yra mūsų sandėlyje (36-068 Bachorz, Lenkija). Galimos mokamos paslaugos: transportavimas. Nurodyta kaina yra be PVM. KALBAME ANGLŲ, VOKIEČIŲ, PRANCŪZŲ, RUSŲ, UKRAINIEČIŲ KALBOMIS. Mūsų pasiūloje rasite kepyklų krosnis, vežimėlių krosnis, daugiaaukštes krosnis, konditerijas krosnis, parduotuvių krosnis, kepyklų mašinas, duonos linijas, bandelių linijas, tešlos linijas, kruasanų linijas, bagetų mašinas, tešlos maišytuvus, mikserius, tešlos lakštines, rogalikų formavimo mašinas. Peržiūrėkite visus mūsų skelbimus.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Double-belt skinning machine Iedpfsv T R Uasx Aauoar Brand: Maja Belt width: 380 mm Dimensions: 1900 x 800 x 1150 mm

Būklė: naudotas, resonance vibrating screen Screen surface: 5,500 x 1,300 mm Ijdpfx Aaotpgdyjuoar with base frame and electric drive

Būklė: geras (naudotas), 345 NAUDOTAS automatinis tešlos dalytuvas-apvalintuvas Fortuna. IŠORINIAI MATMENYS (cm): Iaodpfxeyuvnls Aauor - aukštis: 170, - plotis: 95, - ilgis: 205. Įrenginys paruoštas apžiūrai mūsų sandėlyje (36-068 Bachórz, Lenkija). Galimos mokamos parinktys: transportas. Nurodyta kaina yra be PVM. Kalbame angliškai, vokiškai, prancūziškai, rusiškai ir ukrainietiškai.

Būklė: naudotas, 2 spalvų ofsetinė spaudos mašina - Heidelberg QM46-2 Pagaminimo metai: 1999 - Serijos Nr.: 959690 Lakšto dydis: min. 140 mm × 89 mm - maks. 340 x 460 mm Iaedpfxsyw Ugao Aauor Spausdinimo greitis: maks. 10 000 eksl./val. Storis: 0,04 mm – 0,3 mm Drėkinimo sistema DDS Autplate Plus versija Juostinis padavimas Sauso dulkių barstytuvas Vaizdo apžiūra internetu per WhatsApp, MS Zoom, Telegram Sandėlyje Emskirchen/Niurnbergas - Galima iškart - Galima tikrinti

Būklė: naudotas, 2 spalvų lakštinė ofsetinė spaudos mašina PM-QM46-2 N+P Isdpfx Asyv A S Ueauoar Internetinė vaizdo apžiūra per WhatsApp, MS Zoom arba Telegram Sandėlyje Emskirchen/Niurnbergas - Galima iš karto - Galima išbandyti

Būklė: naujas, Gamybos metai: 2026, The vice is made of high-grade cast iron. Thanks to its precision guidance, the rotary and tilting machine vice is applicable in the field of precision mechanics. The rotating base allows angle adjustment in the horizontal plane by 360 degrees and in the vertical plane by 90 degrees. The jaw inserts are made of hardened tool steel (55±3 HRC) and are precisely ground. The QHK rotary cast iron machine vice is used for work on grinders, milling machines, drilling machines, planers, etc. Manufactured from high-quality cast iron. Equipped with a rotary base with a 360° scale marked in 1° increments. Iajdpfx Ajvxgh Tsaujr The body and the movable jaw are made from premium-grade cast iron. The lead screw is protected from above against contamination and chips. The rotary base can be dismounted. When replacing the jaw inserts, the working surfaces connecting with the vice must be machined to obtain the accuracy parameters specified in the technical documentation.

Būklė: naujas, Gamybos metai: 2026, Rotary machine vise, recommended as standard equipment for milling machines, drill presses, planers, etc. Its lightweight design contributes greatly to the popularity of these vises. Features and Applications The QH rotary cast iron machine vise is used for operations on grinders, milling machines, drill presses, planers, etc. Made from high-quality cast iron. Equipped with a 360° rotary base with 1° graduations. The body and the movable jaw are made from high-grade cast iron. Iaodsvxgi Depfx Aausr The leadscrew is protected from above against contamination and chips. The rotary base can be disassembled if required. When replacing the jaw inserts, the working surfaces contacting the vise must be machined in order to achieve the accuracy parameters specified in the technical documentation.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, A workshop parts washer is a versatile tool that should be present in every service center, garage, or workshop. This indispensable device enables fast and cost-effective removal of contaminants. A significant advantage is its ability to be used indoors. A cabinet parts washer guarantees effective removal of all types of contamination, from oils to hard-to-reach deposits, ensuring both the safety and long-term performance of components. The applied technology not only provides cleanliness but also protects against corrosion. Please note that cleaning results will depend on the detergents used. The parts washer is designed to utilize up to 60 liters of cleaning fluid, with a maximum tank capacity of 80 liters. To achieve maximum efficiency, the pump inlet should be covered during operation. The pump operates with a flow rate of 10 to 12 liters per minute, allowing thorough cleaning of surfaces, including those with fine cracks, using a powerful stream. The liquid is drawn by the pump from the bottom in a closed-circuit system and delivered under pressure through a flexible hose. The workshop washer is equipped with 4 legs, ensuring stable operation and optimized working height. The lid locks automatically when opened. The device also has a worktop below the basin level, which can be used to store washing accessories or cleaned parts to let them dry. The device requires self-assembly. Technical data: Tub capacity: 80L Maximum pump capacity: 10-12 l/min Power supply: 230 V Dimensions: 775 x 540 x 915 mm Internal overall dimensions: 710 x 480 x 260 mm Shelf under the basin: 700 x 420 mm Power supply: 230V Iaodpfsvugvvsx Aauer Weight: 23 kg The price does not apply to machines purchased in Poland.

Būklė: naujas, Gamybos metai: 2026, The vise is made of high-grade cast iron. Thanks to its precise guides, the swivel and tilting machine vise is suitable for use in precision mechanics. The rotary base allows adjustment of the angle in the horizontal plane by 360 degrees and in the vertical plane by 90 degrees. The jaw inserts are made of hardened tool steel (55 ± 3 HRC) and precision ground. Features and Applications Iodpfx Aaovxgkzeuear - The QHK cast iron rotary machine vise is used for work on grinders, milling machines, drill presses, planers, etc. - Manufactured from high-quality cast iron. - Equipped with a rotary base with 360-degree graduation, marked every 1 degree. - The body and the movable jaw are made of high-quality cast iron. - The lead screw is protected from above against contamination and chips. - The rotary base can be disassembled if required. - When replacing the jaw inserts, the working surfaces joined to the vise must be machined to achieve the accuracy parameters specified in the technical documentation.

Būklė: paruoštas naudoti (naudotas), large gripper Ijdpfxod A Rvro Aausar triple feed 6 mm needle spacing complete with subframe with 220 V clutch motor

Būklė: Defektas atsarginių dalių laikiklis (naudotas), Gamybos metai: 2004, Darbinis slėgis (bar): 210 Įpurškimo jėga (kN): 450 Uždarymo jėga (kN): 2400 Atidarymo eiga (mm): 0–510 Įrankio įrengimo aukštis (mm): 460–800 Iasdpsyhn Tgjfx Aausr Būklė: Sugedęs – dalims (nuimta plokštė, nuimtas hidraulinis vožtuvas)

Gamybos metai: 2025, būklė: beveik kaip naujas (parodų įrenginys), Parts Cleaning Machine, Spray Cleaning System Type L800FP Fully automatic hot water parts washing machine with basket drive powered by gear motor, housing made of stainless steel 1.4301, piping and rotary basket galvanized steel, special nozzle system with stainless steel flat jet nozzles, wash pump made of stainless steel (manufacturer: Xylem/Lowara), level control for dry-run protection, - Basket diameter: 780 mm - Effective height: 500 mm - Max. load capacity: 150 kg - Spray pressure: 3 bar - Tank volume: 120 liters - Heating: electrically adjustable (room temperature up to 60°C) Iodpfx Aaefzblqsujar System dimensions (LxWxH): 1,160 x 1,200 x 1,750 mm Suction filter for pump protection Delivery: ex works, FCA

Gamybos metai: 2026, būklė: naujas, Parts Cleaning System, Spray Cleaning Machine Type L90 Automatically operating hot water parts washer with automatic basket drive via geared motor, stainless steel wash pump (make: Lowara), circulating 3-sided spray system (from below, side, and above) with stainless steel nozzles - Basket diameter: 790 mm - Useful height: 500 mm Ijdpfx Aajhgh I Seuoar - Max. load weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (room temp. – 90°C) Machine dimensions (LxWxH): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Washing cycle timer adjustable via Omron timer (minutes and hours) Complete cleaning system (interior and exterior cladding) made from stainless steel 1.4301 Water circulation system and loading basket made from stainless steel 1.4301 Full system insulation (tank and cabin) made from stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 micron) Suction filter for pump protection Operating hours counter Steam extraction including condensate return Prepared for later installation of an oil separator The parts washer is as new, never used. OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST!!!

Gamybos metai: 2026, būklė: naujas, Parts Cleaning Machine, Spray Cleaning System Type L901FP Fully automatic hot-water parts washer with basket drive powered by geared motor. The housing of the unit is made of stainless steel 1.4301; all piping and rotating basket are zinc-plated steel. Special nozzle system equipped with stainless steel flat spray nozzles. Washing pump made of stainless steel (manufacturer: Xylem/Lowara). Level control for dry-running protection. - Basket diameter: 910 mm - Usable height: 520 mm - Max. load weight: 150 kg - Spray pressure: 3 bar - Tank capacity: 190 liters - Heating: electrically adjustable (ambient temp. to 60°C) System dimensions (LxWxH): 1,300 x 1,350 x 1,990 mm Suction filter for pump protection Iodpfefl Ufzsx Aauoar Delivery: ex works, FCA

Būklė: naudotas, 12-piece die block for GEWA press brake Iaodpfxowbvmij Aaujr Press brake tool, lower tool Type: 0255/14 Prism size: 16 mm for 90° Prism angle: 88° Die depth: approx. 8 mm Overall height: 120 mm Max. pressing force per meter: 100 t/m Die foot width: 60 mm Total length: 4,175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, mašinos/transporto priemonės numeris: 23 03 28 / 1, Funkcionalumas: visiškai funkcionalus, SZLIFIERKA TAŚMOWA PODWÓJNA, TYP ZBS Do ręcznego szlifowania, satynowania i polerowania • Wyposażona w lewostronny stojak z napędem taśmy szlifierskiej oraz prawostronny stojak z jednostką napinającą taśmę • Swobodny dostęp w strefie roboczej dzięki prowadzeniu taśm nad górnie zamontowaną jednostką odchylającą • Otwarcie i zamknięcie górnych osłon taśmy szlifierskiej za pomocą siłowników pneumatycznych • Ochrona operatora dzięki ruchomej osłonie taśmy szlifierskiej • Możliwość wyboru taśmy przedniej lub tylnej • Wstępny wybór za pomocą dwóch potencjometrów na panelu sterowania oraz falownika – w wersji High-Line • Wyłącznik krańcowy/praca przez ruchomą osłonę taśmy szlifierskiej • Napięcie każdej taśmy poprzez pneumatyczny napinacz taśmy Iodpfx Aajt Hvkvoujar • Taśma napędzana przez falownik i silnik prądu przemiennego o mocy 4,0 kW • Przemiennik częstotliwości z układem hamulcowym (przemiennik z chopperem) – czas hamowania do 10 s • Prędkość taśmy: 4–25 m/s • Linie awaryjnego wyłącznika bezpieczeństwa w strefie roboczej • Stół przesuwny z rury aluminiowej zamontowany między stojakami maszyny • Ruch stołu przód-tył na 4 miękkich rolkach pryzmowych • Maksymalna masa obrabianego elementu: 100 kg • Mechaniczna regulacja wysokości stołu napędzana wrzecionami z prowadzeniem rolkowym do maks. 780 mm • Napęd wrzecion przez dwa synchroniczne motoreduktory o mocy 0,75 kW, prędkość podnoszenia 0,5–1,5 m/min • Maszyna bez dolnej belki poprzecznej, co zwiększa prześwit roboczy do efektywnej głębokości 1400 mm (dolna krawędź taśmy – podłoże) • Z poprzeczką tymczasową – do usunięcia po ustawieniu i zakotwieniu maszyny do podłoża • Docisk taśmy do detalu za pomocą ręcznego docisku, z przegubowym ramieniem blokowanym śrubą, prowadzenie po miękkich rolkach pryzmowych • Przyłącze odciągu pyłu na lewym stojaku maszyny, średnica 200 mm • Wymagana wydajność odciągu ok. 3400 m³/h • Oświetlenie strefy roboczej za pomocą 2 lamp LED, regulowanych trójstopniowo ZBS 3 – wymiary stołu: 3000 x 1000 mm, taśma szlifierska: 100 x 9000 mm Filtr w zestawie. Szczegółowe informacje w załączonym pliku PDF.

Gamybos metai: 2000, būklė: naudotas, Spare parts for MORA Mü-Tos measuring machine: 2x measuring stands, 2x measuring control cabinets, and various other items. Iaedpfx Ajiuiauoauer

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 20250107, bendras ilgis: 2 000 mm, bendras plotis: 1 900 mm, bendras aukštis: 3 050 mm, bendras svoris: 1 000 kg, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, įėjimo dažnis: 50 Hz, šildymo galia: 24 kW (32,63 AG), garantijos trukmė: 12 mėnesiai, didžiausias leistinas svoris: 700 kg, ruošinio svoris (maks.): 700 kg, narvo dydis: 1 390 mm, Single-stage cleaning machine Operating principle, machine with lifting door The tank of the cleaning machine is manually filled with tap water (optionally via the automatic filling valve AR-2) and heated by means of heating elements and thermostat settings. The time settings for the phases washing, dripping (optionally drying and steam extraction) are set via the “PROCESS TIMER”. The parts are placed on the loading rack or loading trolley and pushed into the cleaning chamber. Optionally, for heavy loads, a conveyor belt (MIU / AIU) can be installed to transport parts into the cleaning cabin. The lifting door is closed, the machine is started, and the wash pump delivers the cleaning fluid onto the items to be cleaned via the rotating spray systems. The rotation of the upper and lower spray pipes is activated by the reaction force of the reaction nozzle located at one end of the spray pipe. The rotational speed can be adjusted with a screw in the reaction nozzle. Optionally, the rotation of the upper spray pipe can be motorized and the spray pipes equipped with nozzles. After the washing time has elapsed, a short dripping phase follows, during which the used cleaning fluid is returned to the wash tank via the filter baskets. Optionally, the cleaning fluid from the washing stage can be filtered using a filter unit (EFG-6 or PP197). Iaedpfxjvvuzce Aausr An additional stage such as pre-washing or rinsing is optionally possible via the fixed spray pipes NS-2 / NS-TEMP. In this case, the parts are rinsed with fresh water (cold or heated), which is drained via the drain valve. Optionally, the parts can be dried after cleaning using a drying unit. After the cleaning process, the lifting door is partially opened for steam extraction. The steam from the cleaning chamber is either extracted using the steam extractor (DF-250S) or condensed and returned to the tank via the steam condenser (FX6002). Both accessories are optional and not part of the standard machine equipment. After the steam extraction time has elapsed, the lifting door opens fully and the cleaning process is finished. Optionally, the lifting door can be equipped with a safety bar that automatically stops the door if an object is detected in the doorway. The cleaned components can be removed from the cleaning cabinet onto a loading area or a loading trolley.

Gamybos metai: 2002, būklė: paruoštas naudoti (naudotas), Siūloma Arburg liejimo mašina su judančios įrankių pusės sukimo įtaisu. Kolonų atstumas: 420 mm, užveržimo jėga: 1000 kN, atidarymo jėga: 250 kN, atidarymo eiga: 500 mm, min. įrankio montavimo aukštis: 250 mm, plokščių matmenys X/Y: 570 mm/570 mm, maks. įrankio svoris: 600 kg, stūmiko eiga: 175 mm. Įpurškimo agregatas 350, sraigto skersmuo: 35 mm/40 mm/45 mm, maks. eigos tūris: 230 cm³, maks. įpurškimo slėgis: 2500 barų. Įrenginio matmenys X/Y/Z: apie 4300 mm/1700 mm/2750 mm, svoris: apie 4500 kg, darbo valandos: apie 75 443 h. Yra dokumentacija. Galima apžiūrėti vietoje. Iaedpfeyddy Iox Aauor

Gamybos metai: 1999, būklė: paruoštas naudoti (naudotas), Parduodama dviejų komponentų liejimo mašina Krauss Maffei Multinject. Užspaudimo jėga: 3500 kN, plokščių matmenys X/Y: 1280 mm/1190 mm, antrasis agregatas: 390CZ. Mašinos matmenys X/Y/Z: apie 6300 mm/2000 mm/3100 mm, svoris: apie 17000 kg, valdymas: Krauss Maffei MC4, darbo valandos: 78424 h. Valdymas sugedęs. Dokumentacija yra. Apžiūra vietoje galima. Iaodpfx Ajxx Uf Asauor

Būklė: paruoštas naudoti (naudotas), Kameros gylis: 750 mm, suvirinimo juostos konfigūracija 2 x 650 mm kiekvienai kamerai, įmontuota, elektros jungtis 3 x 400/415 V 50 Hz, 3 x 220 V 60 Hz, svoris apie 650 kg (su 300 m³/h vakuuminiu siurbliu). Pakavimo greitis apie 2–3 ciklai/min. Ilgis: 1600 mm, plotis: 1055 mm, aukštis: 1045 mm, svoris: 650 kg. Galima apžiūra vietoje. Iodpsw Nq Sbjfx Aauoar