Cronosstech Cecp 100 pirkti naudotą (25 269)

Būklė: naujas, Gamybos metai: 2025, galia: 7,5 kW (10,20 AG), spaudimo jėga: 100 t, stalo plotis: 670 mm, stalo ilgis: 950 mm, perforavimo jėga: 100 t, pramušama skylė stalo paviršiuje: 180 mm, cilindro skersmuo: 45 mm, eigos reguliavimas: 120 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, An eccentric press is a type of mechanical press that operates by means of the force generated through an eccentric mechanism and is used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is a highly efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 100 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver reliable performance tailored for serial production environments. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement through centralized automatic lubrication - Production-ready usability with PLC control + dual hand/foot pedal operation Typical Applications - Cold cutting and punching operations - Cold shearing applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • 4-way guided slide • Spheroidal cast connecting rod and gear bushings • Crankshaft and drive shafts made of 4140 quenched & tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliant • Dual solenoid safety valve • Manually adjustable stroke • Finger–hand safety protection with light curtain • PLC control system • Dual hand/foot pedal operation • Mechanical safety system • Emergency reverse motor operation • Occupational safety regulations compliant • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener units • One set of custom dies (on request) • Eight-way guided slide ✅ TECHNICAL SPECIFICATIONS (100 TON) Psdpfx Asvtx Inehgepu Capacity: 100 Ton Throat depth: 300 mm Bed–ram distance: 400 mm Slide–table clearance: 465 mm Distance between side frames: 420 mm Ram adjustment (shut height adjustment): 85 mm Approx. press width: 1400 mm Approx. press depth: 1900 mm Approx. press height: 2450 mm Front anchor span: 710 mm Side anchor span: 1135 mm Table bore diameter: Ø200 mm Table size: 600×780 mm Die clamping slot diameter: Ø50 mm Ram size: 405×240 mm Table height from floor: 775 mm Stroke adjustment: 10–110 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Approx. weight: 4650 kg Note: Please notify us if you require any changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and aftersales processes are managed by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2026, galia: 15 kW (20,39 AG), spaudimo jėga: 100 t, eigos ilgis: 600 mm, stalo plotis: 650 mm, stalo ilgis: 850 mm, gerklės gylis: 300 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, 100 Ton C-Frame Hydraulic Press – CHCP 100 – New / 24-Month Warranty Hydraulic presses are industrial machines that offer high force and precision in metal forming, deep drawing, cutting, and assembly operations. The CHCP 100 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, is designed for heavy-duty production applications, featuring high tonnage capacity, robust frame construction, and precise operational capabilities. Key Advantages - Rigid, vibration-free steel frame construction - High precision (≤120 microns/meter) - PLC-controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long lifespan and low maintenance cost Applications - Metal forming - Deep drawing and stamping operations - Cutting and punching operations - Assembly and pressing operations - Automotive and ancillary industries Standard Features Pjdpfxsyzb Dye Ahgepu - Stress-relieved steel frame construction by vibration method - PLC control with touch panel - Argon welding applications - Welding certified to EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and squareness in accordance with ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Dual-hand control system - Cooling system Technical Specifications – CHCP 100 - Press Force: 100 Ton - Stroke: 600 mm - Throat Depth: 300 mm - Table – Ram Distance: 700 mm - Table Size: 650 x 850 mm - Press Depth: 1300 mm - Press Width: 650 mm - Table Height from Floor: 900 mm - Total Height: 2700 mm - Main Cylinder Diameter: Ø220 mm - Motor Power: 15 kW - Weight: 8500 kg General Information - Country of Manufacture: Turkey - Warranty: 24 Months - Condition: Brand new and unused This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2026, pjūklo disko skersmuo: 360 mm, pjovimo aukštis (maks.): 100 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 100 mm, pjūklo disko greitis: 160 aps./min, Kvadratinio plieno pjovimo diapazonas prie 90°: 75 mm, pjovimo skersmuo: 100 mm, sukimosi greitis (min.): 160 aps./min, sukimosi greitis (maks.): 160 aps./min, Įranga: sūkių greitis be galo kintamas, Fully Automatic High-Speed Circular Sawing Machine – CHK-100 Circular sawing machines are industrial cutting solutions designed for high-precision and rapid cutting of pipes, profiles, and solid metal materials. They are widely used on serial production lines to achieve fast, repeatable, and clean cuts. The CRONOSSTECH CHK Series Fully Automatic High-Speed Circular Sawing Machines deliver high production efficiency thanks to their robust mechanical construction and advanced automation system. With a PLC-controlled automation system and a touch-screen operator panel, cutting parameters can be easily adjusted, enabling serial cutting operations to be carried out with high precision. The spheroidal cast iron machine body, heavy-duty transmission system, and servo feed technology ensure vibration-free operation and extended tool life. CHK Series machines are engineered for the rapid and precise cutting of pipes, profiles, and solid materials. Key Advantages • Fully automatic cutting operation • High-speed circular sawing technology • Servo-driven feeding system • PLC-controlled automation system • High cutting precision and stability • Robust construction for industrial use Applications • Steel service centers • Metal processing plants • Pipe and profile manufacturers • Machinery manufacturing industry • Automotive and ancillary industries Standard Features • Precision cutting and smooth surface quality • Special gearbox design • Automatic lubrication system • Centralized lubrication system • Adjustable vice pressure system • Servo-driven feeding system • Automatic loading system • Pallet conveyor system • Electromagnetic brake system • Scrap separation system • Diameter control system • Chip cleaning brush driven by hydromotor • Air pressure control system • Easy operation with PLC control unit • Torque control system for extended blade life • Easily adjustable vice pressure according to material type Technical Specifications – CHK-100 Cutting Capacity (Round): Ø25 – 100 mm Cutting Capacity (Square): Max. 75 × 75 mm Cutting Capacity (Rectangular): Max. 90 × 70 mm Ppodpfx Ajyq N Iwehgsu Main Motor Power: 11 kW Hydraulic Motor Power: 3 kW Material Feed Motor Power: 2.2 kW Saw Blade Dimensions: Ø360 × 2.25 × 2.6 mm Blade Speed Range: 40 – 160 rpm Single-Feed Length: 630 mm Bundle Material Feed Length: 3000 mm Trim Length: 60 – 70 mm Machine Weight: 3800 kg

Būklė: naujas, Gamybos metai: 2025, galia: 5,5 kW (7,48 AG), spaudimo jėga: 80 t, stalo plotis: 660 mm, stalo ilgis: 860 mm, perforavimo jėga: 80 t, pramušama skylė stalo paviršiuje: 180 mm, eigos reguliavimas: 110 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, An eccentric press is a type of mechanical press driven by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 80 Ton is designed for stable operation in cold forming applications. Its rigid steel frame construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-centric design (light curtain + safety systems) - Low maintenance need thanks to central automatic lubrication - Ready-to-use operation with PLC control + two-hand/foot pedal operation Areas of Use - Cold cutting and punching operations - Cold blanking applications - Metal die forming - High-volume production lines Pjdpfx Asvtx H Rshgepu ✅ STANDARD FEATURES • Steel frame construction • Four-sided slide guides • Nodular cast iron connecting rod and gear bushings • Crankshaft and transmission shafts made of 4140 alloyed steel • Central fully automatic grease lubrication • Pneumatic clutch and brake combination • CE safety directives compliant • Double-coil safety valve • Manually adjustable stroke • Light curtain finger/hand protection safety system • PLC control system • Dual-hand/foot pedal operation system • Mechanical safety lock system • Emergency reverse motor motion • Compliant with occupational safety regulations • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard on 150–300 tons) • Hydraulic safety system (standard on 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener • One set of custom die set • Eight-sided slide guides ✅ TECHNICAL SPECIFICATIONS (80 TON) Capacity: 80 tons Throat depth: 280 mm Bed–ram distance: 400 mm Slide–bed distance: 420 mm Distance between frame walls: 400 mm Ram adjustment (stroke adjustment): 85 mm Approximate press width: 1400 mm Approximate press depth: 1735 mm Approximate press height: 2220 mm Front anchor dimension: 670 mm Side anchor dimension: 1040 mm Table hole diameter: Ø190 mm Table size: 540×740 mm Die clamping slot diameter: Ø40 mm Ram size: 370×230 mm Bed height from floor: 755 mm Stroke range: 10–100 mm Strokes per minute: 45–75 spm Motor power: 7.5 kW Motor speed: 1450 rpm Approximate weight: 4000 kg Note: Please contact us for any request for modifications to technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 100 t, eigos ilgis: 600 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 200 mm, atitraukimo jėga: 40 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 100/40 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guide Rails General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and spinning applications. The 8-guide H-frame structure provides maximum rigidity during the pressing cycle; parallelism and perpendicularity tolerances are stably maintained throughout the stroke. The CHSP 100/40 model, featuring a 100-ton main ram and a 40-ton lower cushion (pot) capacity, is engineered for precise deep drawing and spinning operations. The frame construction is stress relieved by vibration, ensuring long lifespan and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame type with 8 slide guides - Stress-relieved frame structure by vibration - Bronze Zr14 slide guide bushings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel screen (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring via screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 100/40 - Type: Steel construction, H-frame type with 8 slide guides - Frame Material: St52 – ERDEMİR - Slide Guide Bushings: Bronze Zr14 - Capacity (Ram): 100 Ton - Capacity (Cushion): 40 Ton - Moving Table Size: 1000 × 1200 mm - Fixed Table Size: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Ram Stroke: 600 mm - Cushion Stroke: 200 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Weld Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS approved, accredited by TÜRK-AK EN ISO 15614-1:2017 (Supervised by certified welding coordination engineers according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 11 kW – IE3 - Main Pump: 22 cm³ – REXROTH or PARKER - Moving Table Rapid Down Speed: 150 mm/s - Moving Table Drawing Speed: 12 mm/s - Moving Table Return Speed: 170 mm/s - Cushion Advance Speed: 30 mm/s - Main Cylinder Bore: Ø230 mm – Ck45 - Cushion Cylinder Bore: Ø140 mm – Ck45 Pedsx N T Uyspfx Ahgspu - Auxiliary Acceleration Cylinders: 2 units - Approximate Height: 3400 mm - Approximate Width: 2950 mm - Approximate Depth: 2000 mm - Bottom Table Height from Floor: 1250 mm - Pre-fill Valve: NG 100 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel Screen: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 9 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, galia: 22 kW (29,91 AG), spaudimo jėga: 250 t, eigos ilgis: 160 mm, stalo plotis: 700 mm, stalo ilgis: 1 100 mm, gerklės gylis: 350 mm, eigos reguliavimas: 150 mm, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, Eccentric Press: This is a type of mechanical press powered by force transmitted through an eccentric mechanism, used mainly in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 250 Ton is designed for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for serial production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Reduced maintenance requirement with centralized automatic lubrication - Ready-to-use with PLC control + two-hand/foot pedal operation Fields of Application - Cold shearing and punching operations - Cold blanking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES - Steel construction frame - Four-sided slideways - Spheroidal graphite cast connecting rod and gear housings - Crankshaft and transmission shafts made from 4140 tempered steel - Centralized fully automatic grease lubrication system - Pneumatic clutch and brake combination - Compliant with CE safety directives - Dual-coil safety valve - Manually adjustable stroke - Light curtain finger–hand protection safety system - PLC control system - Two-hand/foot pedal control system - Mechanical safety lock - Emergency reverse motor movement - Compliance with occupational safety regulations - CE standards compliant ✅ OPTIONAL FEATURES - Anti-vibration pads - Touchscreen LCD display (standard for 150–300 ton models) - Hydraulic safety system (standard for 200–300 ton models) - Spare bolster plate - Decoiler, feeder, and straightener - One set of dies to customer specification Pjdpfx Ahsx N Nfbsgspu - Eight-sided slideways ✅ TECHNICAL SPECIFICATIONS (250 TON) Capacity: 250 Ton Throat depth: 350 mm Bed–ram distance: 520 mm Slide–bed distance: 630 mm Distance between walls: 520 mm Ram adjustment (stroke adjustment): 150 mm Approximate press width: 2000 mm Approximate press depth: 2500 mm Approximate press height: 3100 mm Front anchor measurement: 930 mm Side anchor measurement: 1430 mm Bed hole diameter: Ø250 mm Bed size: 700×1100 mm Die clamping slot diameter: Ø60 mm Ram size: 670×380 mm Table height from floor: 810 mm Stroke range: 20–160 mm Strokes per minute: 40 spm Motor power: 22 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 12000 kg Note: Please inform us if you need changes in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. All sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, galia: 30 kW (40,79 AG), spaudimo jėga: 300 t, eigos ilgis: 200 mm, stalo plotis: 700 mm, stalo ilgis: 1 200 mm, gerklės gylis: 370 mm, eigos reguliavimas: 150 mm, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, Eccentric presses are a type of mechanical press that operates via an eccentric mechanism, providing the force required for cold forming operations such as punching, shearing, and shaping with dies. Thanks to their high production speeds and repeatability, they offer an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 300 Ton is engineered to deliver stable performance in cold forming applications. Its rigid steel body, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure dependable operation and suitability for serial production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance needs with centralized automatic lubrication - Production-ready usability with PLC control and dual-hand/foot pedal control system Applications - Cold shearing and punching operations - Cold breaking processes - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-sided slide-way guides • Spheroidal cast connecting rod and gear housings • Crankshaft and transmission shafts made from 4140 tempered steel • Centralized fully automated grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Double-coil safety valve • Manually adjustable stroke • Light curtain finger-hand safety protection system • PLC control system • Dual hand/foot pedal operation system • Mechanical safety interlock • Emergency reverse motor operation • Compliant with occupational safety regulations • CE compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare bolster plate • Uncoiler, feeder, and straightener • One set of dies to customer specifications • Eight-way slide guide ✅ TECHNICAL SPECIFICATIONS (300 TON) Capacity: 300 Ton Throat depth: 370 mm Die-bed distance: 530 mm Slide-bed distance: 650 mm Distance between side frames: 470 mm Ram adjustment (stroke adjustment): 150 mm Approx. press width: 2000 mm Approx. press depth: 2700 mm Approx. press height: 3200 mm Front anchor dimension: 940 mm Side anchor dimension: 1440 mm Bolster hole diameter: Ø260 mm Bolster plate dimensions: 700×1200 mm Die clamping hole diameter: Ø60 mm Ram dimensions: 780×400 mm Bed height from floor: 810 mm Stroke adjustment: 20–200 mm Strokes per minute: 38 spm Motor power: 30 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 13,200 kg Note: If you require changes to the technical specifications, please contact us. ✅ MANUFACTURING / SUPPLY NOTE Podox N Nfhspfx Ahgjpu This machine is manufactured in Turkey by CRONOSSTECH. All sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, galia: 15 kW (20,39 AG), spaudimo jėga: 200 t, stalo plotis: 800 mm, stalo ilgis: 1 100 mm, perforavimo jėga: 200 t, pramušama skylė stalo paviršiuje: 220 mm, cilindro skersmuo: 60 mm, eigos reguliavimas: 180 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, Eccentric Presses are mechanical presses powered via an eccentric mechanism, designed for cold working operations such as punching, cutting, and forming with dies. Thanks to their high production speeds and repeatability, they offer efficient and reliable solutions for mass production lines. The CRONOSSTECH C-Type Eccentric Press 200 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suited for series production. Key Advantages - Stable stroke performance and high repeatability for serial production - Operator safety-focused design (light curtain + safety systems) - Low maintenance need with centralized automatic lubrication - PLC control with dual-hand/foot pedal operation for production-ready use Pjdpfx Aovtyx Ijhgepu Areas of Application - Cold cutting and punching operations - Cold extruding applications - Metal forming with dies - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • 4-sided slide guideways • Spheroidal cast connecting rods and gear housings • Crankshaft and transmission shafts made from 4140 tempered steel • Fully automatic centralized grease lubrication • Pneumatic clutch and brake combination • Conforms to CE safety directives • Double-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual-hand/foot pedal control system • Mechanical safety lock system • Emergency reverse run motor • Compliant with occupational safety regulations • CE standard compliance ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolsters • Coil decoiler, straightener, and feeder • One die set to desired specifications • 8-sided slideways ✅ TECHNICAL SPECIFICATIONS (200 TON) Capacity: 200 Ton Throat depth: 340 mm Table–ram distance: 500 mm Slide–table clearance: 600 mm Distance between side walls: 510 mm Ram (slide) adjustment: 130 mm Approximate press width: 1900 mm Approximate press depth: 2400 mm Approximate press height: 3000 mm Front anchorage dimension: 920 mm Side anchorage dimension: 1420 mm Table bore diameter: Ø240 mm Table size: 680×1000 mm Die mounting hole diameter: Ø60 mm Ram size: 620×350 mm Table height from floor: 805 mm Stroke adjustment: 20–140 mm Strokes per minute: 50 spm Motor power: 18.5 + 0.75 kW Motor speed: 1450 rpm Approximate weight: 9200 kg Note: For any changes to the technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE: This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and aftersales processes are managed by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 100 t, eigos ilgis: 500 mm, stalo plotis: 800 mm, stalo ilgis: 1 000 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 100 H-Frame Single-Acting Hydraulic Press – 8-Guideway General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are industrial presses with a rigid steel construction designed for sheet forming, straightening, assembly, and die pressing applications. The 8-guideway H-frame ensures high stability and repeatable precision during pressing operations. CHP Series – Structural Features CHP series presses are engineered with heavy-duty applications in mind. The frame and supporting components are stress-relieved by vibration. The bronze Zr14 used in the slide bearings provides long-lasting and stable operation. Key Advantages - 8-guideway H-frame structure - Stress-relieved steel construction by vibration - Welding applications conforming to ISO standards - PLC-controlled and touchscreen-operated - Operator safety and process stability-focused design ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press body - Stress-relieved frame and carrier components via vibration - Bronze Zr14 slide bearings - WPQR & WPS approved welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - 7" DELTA touchscreen display - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via display - Cooling system and off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 100 Type: Steel construction, 8-guideway H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 100 Ton Movable Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 500 mm Min. Daylight: 100 mm Max. Daylight: 600 mm Stress Relief: Vibration Welding Application: TÜRK-AK accredited WPQR and WPS certified to EN ISO 15614-1/2017 (supervised by welding engineers certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/sec Movable Table Forming Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Main Cylinder Inner Diameter: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approximate Height: 3400 mm Approximate Width: 2950 mm Approximate Depth: 2000 mm Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 6.5 Ton Production Note Ppodpjx N Tx Sjfx Ahgsu This machine is manufactured in Turkey by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, galia: 4 kW (5,44 AG), spaudimo jėga: 40 t, stalo plotis: 440 mm, stalo ilgis: 700 mm, perforavimo jėga: 40 t, pramušama skylė stalo paviršiuje: 140 mm, cilindro skersmuo: 35 mm, eigos reguliavimas: 80 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, Eccentric Press; is a type of mechanical press driven by a force generated through an eccentric mechanism, utilized in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 40 Ton is designed for stable operation in cold forming applications. Its rigid steel construction body, pneumatic clutch–brake system, and CE-compliant safety infrastructure offer reliable performance suitable for serial production. Key Advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Ready-to-use operation with PLC control + dual hand/foot control Applications: - Cold shearing and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-sided guided slide • Spheroidal casting connecting rod and gear bearings • Crankshaft and drive shafts made of 4140 alloy steel • Fully automatic central grease lubrication system • Pneumatic clutch and brake combination • CE-compliant to safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system Ppodevtx Axjpfx Ahgeu • PLC control system • Dual hand/foot control system • Mechanical safety lock system • Emergency reverse motor operation • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Vibration damping pads • Touch LCD screen (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare table • Decoiler, feeder, and straightener • One set of tooling per requested specifications • 8-slide guideways ✅ TECHNICAL SPECIFICATIONS (40 TON) Capacity: 40 Ton Throat depth: 220 mm Table–ram distance: 340 mm Distance between frame sides: 330 mm Ram adjustment (stroke regulation): 60 mm Approx. press width: 1050 mm Approx. press depth: 1280 mm Approx. press height: 2100 mm Front anchoring dimension: 575 mm Side anchoring dimension: 740 mm Table hole diameter: Ø150 mm Table size: 440×630 mm Die mounting hole diameter: Ø40 mm Ram size: 290×180 mm Table height from floor: 720 mm Stroke adjustment: 10-70 mm Strokes per minute: 55 spm Motor power: 4 kW Motor speed: 1450 rpm Approximate weight: 2100 kg Note: If you require changes to the technical specifications, please let us know. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 130 t, stalo plotis: 750 mm, stalo ilgis: 1 000 mm, perforavimo jėga: 130 t, pramušama skylė stalo paviršiuje: 220 mm, cilindro skersmuo: 55 mm, eigos reguliavimas: 140 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, An eccentric press is a type of mechanical press operated by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 125 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for series production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement thanks to centralized automatic lubrication - Ready-to-use production with PLC control + dual hand/foot control Application Areas - Cold cutting and punching operations - Cold-breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel welded body • Four-sided guided slideway • Spheroidal graphite cast connecting rod and gear housing • Crankshaft and transfer shafts from 4140 tempered steel • Centralized fully automatic grease lubrication • Pneumatic clutch and brake combination • CE safety directives compliant • Dual coil safety valve • Manually adjustable stroke • Light curtain hand-finger protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor function • In compliance with occupational safety regulations • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD display (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare table • Decoiler, feeder, and straightener • One set of die per requested specification • Eight-point slide guidance ✅ TECHNICAL SPECIFICATIONS (125 TON) Capacity: 125 Tons Throat depth: 310 mm Table–slide distance: 500 mm Slide–table gap: 510 mm Distance between uprights: 450 mm Ram adjustment (shut height adj.): 100 mm Press width: 1500 mm Press depth: 2200 mm Press height: 2700 mm Front anchor dimension: 790 mm Side anchor dimension: 1250 mm Table bore diameter: Ø210 mm Table size: 630×820 mm Die clamping hole diameter: Ø55 mm Ppjdpfxsvtyvge Ahgsu Ram size: 500×250 mm Floor to table height: 785 mm Stroke adjustment: 10–125 mm Strokes per minute: 50 SPM Motor power: 11 kW Motor speed: 1450 rpm Weight: 6000 kg Note: If you require changes to the technical specifications, please let us know. ✅ PRODUCTION / SUPPLY NOTE This machine is produced by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, galia: 8 kW (10,88 AG), STANDARTINĖ ĮRANGA Plieninė suvirinta konstrukcija Trys motoru varomi volai Iš specialios aukštos stiprumo medžiagos pagaminti ir grūdinti bei šlifuoti velenai Horizontali ir vertikali darbo padėtis Grūdinti standartiniai volų ratai Atskiras nuo įrenginio judrus valdymo pultas Mechaniniai rankiniai šoniniai atmušėjai, judantys 3 kryptimis Tiksli lenkimas su stabdžiu įrengtu varikliu Skaitmeniniai indikatoriai (2 vnt.) PAPILDOMA ĮRANGA Vamzdžių ir profilių lenkimo volai Papildomos dviejų ašių hidraulinės šoninės atmušos Automatika su NC valdymu TECHNINĖS CHARAKTERISTIKOS Ppsdpfx Ajw Smi Iohgsu Velenų skersmuo: 100 mm Volų skersmuo: 315 mm Darbinis greitis: 7 m/min Variklio galia: 7,5 kW Ilgis: 2000 mm Plotis: 1450 mm Aukštis: 1700 mm Svoris: 3650 kg

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 300 t, eigos ilgis: 800 mm, stalo plotis: 1 200 mm, stalo ilgis: 1 500 mm, atitraukimo jėga: 100 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 300/100 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided Slideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and forming applications. Thanks to its H-frame structure with 8 slideways, maximum rigidity is assured during pressing, while parallelism and perpendicularity tolerances remain stable throughout the long stroke. The CHSP 300/100 model is designed for deep drawing and forming operations that require high tonnage, featuring a 300-ton main ram and a 100-ton cushion ram (blank holder). The frame construction undergoes stress relief by vibration to ensure durability and reliable operation over its lifetime. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press body - Stress-relieved frame structure by vibration - Bronze Zr14 slideway bushings - WPQR and WPS welding procedures approved by TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacture in compliance with CE standards - PLC controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion (pot) stroke control - Adjustable ram and cushion (pot) tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Real-time display of hydraulic unit oil temperature and system statuses on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 300/100 Pjdpfxex N Uhbo Ahgspu - Type: Steel construction, 8-guideway H-frame press body - Frame Material: St52 – ERDEMİR - Slideway Bushings: Bronze Zr14 - Capacity (Ram): 300 tons - Capacity (Cushion): 100 tons - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 microns/meter - Perpendicularity Tolerance: 60 microns/meter - Stroke (Ram): 800 mm - Stroke (Cushion): 300 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS accredited by TURK-AK - EN ISO 15614-1/2017 - Welding operations are overseen by “welding coordination engineers” certified according to EN ISO 14731 - Max. Working Pressure: 250 bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Movable Table Fast Down Speed: 150 mm/s - Movable Table Forming Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Cushion Table Advance Speed: 30 mm/s - Main Cylinder Bore: Ø390 mm – Ck45 - Cushion Cylinder Bore: Ø230 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approximate Height: 4400 mm - Approximate Width: 3250 mm - Approximate Depth: 2200 mm - Lower Table Height from Floor: 1350 mm - Pre-Fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC System: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 21 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 100 t, eigos ilgis: 600 mm, stalo plotis: 800 mm, stalo ilgis: 800 mm, tarpas tarp stulpų: 800 mm, atitraukimo jėga: 40 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH 100/40 Ton Four-Column Hydraulic Deep Drawing Press General Description The CRONOSSTECH 100/40 ton four-column hydraulic deep drawing press is an industrial solution with a rigid four-column body structure, engineered for metal forming, deep drawing, and precision pressing applications. The frame is fabricated from St52 quality steel and subjected to stress relief treatment by vibratory methods. This design ensures high parallelism and perpendicularity tolerances are maintained over prolonged periods. The ram and cushion systems operate independently; stroke and pressure settings are precisely controlled via touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 efficiency class motor, and PLC-controlled architecture, the press delivers high efficiency, reliability, and a long service life. The automatic lubrication system and electronic filter contamination warnings minimize maintenance requirements. This model is an ideal solution for medium-scale serial production, die trial runs, and precision forming operations. Key Advantages - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and cushion - Full control via touchscreen panel - High precision and repeatability - Low maintenance cost and long service life Applications - Metal spinning and forming operations - Deep drawing applications - Die trial runs and prototype production - Auxiliary pressing operations ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: Four-Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 units, induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 100 tons CAPACITY (CUSHION): 40 tons DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 600 mm STROKE (CUSHION): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 700 mm WELDING STRESS RELIEF: Via vibration WELDING PROCEDURE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 15 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/s MOVABLE TABLE FORMING SPEED: 12 mm/s MOVABLE TABLE RETURN SPEED: 170 mm/s CUSHION TABLE FORWARD SPEED: 30 mm/s Ppjdox N Ulyjpfx Ahgeu MAIN CYLINDER BORE DIAMETER: Ø 230 mm – Ck45 CUSHION CYLINDER BORE DIAMETER: Ø 145 mm – Ck45 AUXILIARY BOOSTER CYLINDERS: 2 units APPROXIMATE PRESS HEIGHT: 3500 mm APPROXIMATE PRESS WIDTH: 1150 mm APPROXIMATE PRESS DEPTH: 1150 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1200 mm MAIN FILLING VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable from screen) RAM / CUSHION STROKE & TONNAGE ADJUSTMENT: Adjustable from screen SYSTEM & PRESS STATUS INFO: Viewable via display DIE MEMORY: Adjustable from screen LINEAR DISTANCE ENCODER: NOVATECHNIK or TURCK PLC APPLICATION: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 7.5 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, galia: 15 kW (20,39 AG), spaudimo jėga: 160 t, stalo plotis: 920 mm, stalo ilgis: 660 mm, gerklės gylis: 320 mm, perforavimo jėga: 160 t, cilindro skersmuo: 55 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, An eccentric press is a type of mechanical press that operates with force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C Frame Eccentric Press 150 Ton is specifically designed for stable performance in cold forming applications. With its rigid steel construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure, it delivers reliable, series-production-ready performance. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + two-hand/foot pedal control Applications - Cold shearing and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-point slide guidance • Spheroidal cast connecting rod and gear housings • Crankshaft and drive shafts manufactured from 4140 tempered steel • Fully automatic central grease lubrication system • Pneumatic clutch and brake combination • Compliance with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain hand/finger safeguarding system • PLC control system • Two-hand/foot pedal control system • Mechanical lock system • Emergency reverse motor function • Compliance with occupational health and safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 tons) • Hydraulic lock system (standard for 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies to required specifications • Eight-point slide guidance ✅ TECHNICAL SPECIFICATIONS (150 TON) Capacity: 150 Ton Throat depth: 320 mm Table–ram distance: 500 mm Slide–table opening: 540 mm Distance between uprights: 500 mm Ram adjustment (shut height): 120 mm Approx. machine width: 1600 mm Approx. machine depth: 2280 mm Approx. machine height: 2750 mm Ppsdpfx Aevtywdshgsu Front anchorage dimension: 840 mm Side anchorage dimension: 1300 mm Table bore diameter: Ø220 mm Table size: 660×920 mm Die clamping slot diameter: Ø55 mm Ram size: 600×290 mm Floor to table height: 805 mm Stroke adjustment: 10–125 mm Strokes per minute: 42 spm Motor power: 15 kW Motor speed: 1450 rpm Approx. weight: 7100 kg Note: Please inform us for any modification requests on the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, galia: 5,5 kW (7,48 AG), spaudimo jėga: 60 t, stalo plotis: 590 mm, stalo ilgis: 800 mm, perforavimo jėga: 60 t, pramušama skylė stalo paviršiuje: 140 mm, cilindro skersmuo: 40 mm, eigos reguliavimas: 100 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, An eccentric press is a type of mechanical press driven by force generated through an eccentric mechanism, designed for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 60 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch–brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production. Key advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready usage with PLC control and dual-hand/foot pedal operation Areas of use: - Cold cutting and punching operations - Cold blanking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-way slide guide • Spheroidal cast connecting rod and gear bearings • Crankshaft and drive shafts made of 4140 quenched and tempered steel • Central system fully automatic grease lubrication • Pneumatic clutch and brake combination • Complies with CE safety directives • Double-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual-hand/foot pedal control system • Mechanical safety lock system • Emergency reverse motor function • Complies with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies to customer specifications • 8-guide slideway ✅ TECHNICAL SPECIFICATIONS (60 TON) Capacity: 60 Ton Throat depth: 260 mm Distance table–ram: 360 mm Slide–table distance: 395 mm Distance between side frames: 380 mm Ram adjustment (stroke adjustment): 70 mm Approx. press width: 1340 mm Approx. press depth: 1450 mm Approx. press height: 2200 mm Front anchor dimension: 630 mm Side anchor dimension: 875 mm Table hole diameter: Ø150 mm Table size: 520×720 mm Die mounting slot diameter: Ø40 mm Ram size: 340×220 mm Floor-to-table height: 730 mm Stroke adjustment: 0–95 mm Strokes per minute: 50 spm Motor power: 4 kW Pedpfxsvtx D Nj Ahgepu Motor speed: 1450 rpm Approx. weight: 2750 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 300 t, eigos ilgis: 800 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 000 mm, tarpas tarp stulpų: 1 000 mm, atitraukimo jėga: 100 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH 300 / 100 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 300 / 100 ton four-column hydraulic deep drawing press is a high-rigidity four-column hydraulic press solution developed for metal forming, deep drawing, and precision pressing applications. The St52-grade steel welded body undergoes a stress relief process using vibration. This ensures that the parallelism and perpendicularity tolerances are stably maintained across the full stroke during pressing. Ram and blank holder systems operate independently, and stroke and tonnage settings can be precisely controlled via a touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 motor class, and PLC-controlled structure, the press offers high efficiency and reliable operation. Maintenance requirements are minimized thanks to the automatic lubrication system and electronic filter contamination alerts. With its 300 / 100 ton capacity, this model is the ideal industrial press solution for mid and high-tonnage metal forming, deep drawing, and die applications. Key Advantages - High-rigidity four-column press frame - Independent stroke and tonnage adjustment for ram and blank holder Ppsdpfx Ahex N Unzsgsu - Full control via touchscreen panel - High precision and repeatability - Long-lasting, low-maintenance design Application Areas - Metal forming operations - Deep drawing processes - Die trial and production lines - Auxiliary pressing processes ⚙️ STANDARD AND TECHNICAL FEATURES TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN DIAMETER: Ø 90 mm – 4 pcs. induction-hardened chrome-plated shafts SLIDE BEARINGS: Bronze Zr14 CAPACITY (RAM): 300 Tons CAPACITY (BLANK HOLDER): 100 Tons DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter STROKE (RAM): 800 mm STROKE (BLANK HOLDER): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 900 mm WELDING STRESS RELIEF: Vibration stress relief WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 30 kW – IE3 MAIN PUMP: 45 cm³ – REXROTH or PARKER MOVING TABLE FAST APPROACH SPEED: 150 mm/sec FORMING SPEED: 12 mm/sec RETURN SPEED: 170 mm/sec BLANK HOLDER FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 390 mm – Ck45 BLANK HOLDER CYLINDER BORE: Ø 230 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROX. PRESS DIMENSIONS: 4000 × 1450 × 1450 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1300 mm MAIN CHARGING VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCHSCREEN PANEL: DELTA 7” CONTROL COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 18 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2026, galia: 7,5 kW (10,20 AG), spaudimo jėga: 60 t, eigos ilgis: 160 mm, darbinis greitis: 10 mm/s, atbulinės eigos greitis: 90 mm/s, gerklės gylis: 320 mm, ramplokštės ilgis: 2 100 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, Standard Equipment Stroke: 160 mm Daylight (Lower – Upper Die Opening): 380 mm Throat Depth: 320 mm Bending Length: 2100 mm Distance Between Columns: 1700 mm Machine Features - Dual-cylinder upper beam bending system - Steel frame and upper beam construction providing high static and dynamic rigidity - Upper beam movement supported by fiber slide bearings - High-strength balancing shaft and eccentric bearing system for parallelism - Motor-controlled angle adjustment with mechanical stroke system inside the cylinder - Large working opening suitable for use with various dies - Ton capacity adjustment and bottom dead point setting via NC control unit - Hydraulic safety system against overpressure - Double-speed operation: rapid approach, bending, and fast return - CE-compliant multifunctional foot pedal and emergency stop system - Compact hydraulic power unit with HAWE or Rexroth components - Remote service support with Siemens, Pizzato, and Balluff electrical equipment - LEUZE safety system and learning mode - NC control unit with 500 program storage and 200 lines per program - Easy program upload and download via USB - Standard punch and die set - NC-controlled motorized X-axis back gauge (600 mm) - Programmable back gauge system with linear guides - 0.2 mm positioning accuracy - Motorized Y-axis angle adjustment - Movable control panel - Linear guided front support arms - Lower die centering and locking bolts - Programmable precise back gauge retract function Optional Equipment - Motorized R-axis - Special bending dies - Special dual-hand and foot-operated pedal system - DSP or FIESSLER safety systems - Extended back gauge travel - Additional back gauge fingers - Extra front support arm - Manual crowning system - Motorized crowning system Technical Specifications Bending Force: 60 Tons Maximum Bending Capacity: 4 mm Bending Length: 2100 mm Distance Between Columns: 1700 mm Stroke: 160 mm Bending Speed: 10 mm/sec Approach Speed: 90 mm/sec Throat Depth: 320 mm Daylight: 380 mm Table Width: 100 mm Table Height: 845 mm Main Motor Power: 7.5 kW X-Axis Motor: 0.75 kW Y-Axis Motor: 0.37 kW Optional R-Axis Motor: 0.25 kW Back Gauge Travel: 600 mm Oil Tank Capacity: 120 L Machine Length: 2450 mm Machine Width: 1600 mm Machine Height: 2235 mm Machine Weight: 4340 kg Country of Origin: Turkey Ppodjzcmbfopfx Ahgju Manufacturer: CRONOSSTECH Makina

Būklė: naujas, Gamybos metai: 2026, galia: 22 kW (29,91 AG), spaudimo jėga: 220 t, eigos ilgis: 260 mm, darbinis greitis: 10 mm/s, atbulinės eigos greitis: 110 mm/s, gerklės gylis: 410 mm, ramplokštės ilgis: 6 100 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, HPB B220-6100 – 220 Ton x 6100 mm CNC Hydraulic Press Brake Ppjdpfxozbyvts Ahgou The HPB B220-6100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, has been developed for precise, powerful, and repeatable bending of long sheet metal parts with a bending force of 220 tons and a bending length of 6100 mm. It is suitable for heavy industry, steel construction, energy, machinery manufacturing, and metalworking applications. The machine offers high efficiency thanks to its ESA S630 CNC control unit, servo-driven motorized backgauge system, European-style tooling clamp system, rigid frame construction, and professional equipment. Standard Features Stroke: 260 mm Open Height: 465 mm Throat Depth: 410 mm Bending Length: 6100 mm Distance Between Columns: 5100 mm ESA S630 CNC Control Unit 10” 2D touchscreen graphic display Manual bending sequence and collision avoidance calculation Angle correction function Angle measurement and adjustment 2D drawing capability 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Backgauge X-axis travel: 750 mm X-axis speed: 250 mm/sec Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Heavy-duty steel frame Hardened ball screw Hardened linear guides Optional X-axis travel: up to 1000 mm Tooling and Backgauge System 2 straight type, 3-stage backgauge fingers Manual Z-axis movement European-style quick-change Promecam upper tool holder CRONOSSTECH special narrow lower table Standard upper punch ES1260, H: 67 mm, 85°, R: 0.8 mm Standard lower die ES2067, 60 x 60 mm, V: 16-22-35-50 mm Amada-compatible tooling system Other Standard Equipment B series open-frame design Black plexiglass safety panels Single pedal operation GIVI linear scales Upper beam LED lighting VDE standard electrical panel Schneider or Siemens electrical components Hoerbiger / HAWE hydraulic block Eckerle pump Siemens drive Energy-saving standby function 2 standard sliding front support arms Optional Features AKAS II front safety laser system + PLC + rear light barriers Delem DA53Tx 15” CNC control unit Delem DA58Tx 18.5” CNC control unit CNC-controlled motorized crowning system Extended X-axis travel up to 1000 mm Additional front support arms Extra backgauge fingers Special bending tools Technical Specifications Bending Force: 220 tons Bending Length: 6100 mm Distance Between Columns: 5100 mm Stroke: 260 mm Open Height: 465 mm Throat Depth: 410 mm Table Height: 1060 mm Machine Length: 7560 mm Machine Width: 2570 mm Machine Height: 3440 mm Approach Speed: 150 mm/sec Return Speed: 110 mm/sec Bending Speed: 10 mm/sec Oil Tank Capacity: 290 L Machine Weight: 20,000 kg Main Motor Power: 22 kW Backgauge X-axis speed: 300 mm/sec Backgauge R-axis speed: 250 mm/sec This machine is manufactured in Turkey by CRONOSSTECH. Country of origin: Turkey.

Būklė: naujas, Gamybos metai: 2026, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, pavaros tipas: hidraulinis, valdiklių gamintojas: ELGO, valdiklio modelis: P40T 5,7", darbinis plotis: 3 100 mm, maks. lakšto storis: 20 mm, plieno lakšto storis (maks.): 20 mm, atgalinio ribotuvo reguliavimas: valdomas CNC, galia: 37 kW (50,31 AG), Įranga: CE žymėjimas, Tipinė plokštelė prieinama, apsaugos šviesos užtvara, avarinis stabdymas, dokumentacija / vadovas, kojinis nuotolinio valdymo pultas, pirštų apsauga, HGM B20-3100 – 20 mm x 3100 mm Hydraulic Guillotine Shear Manufactured in Turkey by CRONOSSTECH, the HGM B20-3100 Hydraulic Guillotine Shear is engineered for heavy industry, steel construction, shipbuilding, energy sectors, and high-capacity metalworking applications, featuring a 20 mm sheet cutting capacity and 3100 mm cutting length. With the ELGO P40T touch-screen CNC control unit, motorized backgauge system, Rexroth hydraulic system, and dual-speed cutting technology, it delivers high performance and precise cutting operations. Standard Features • Throat Depth: 250 mm • Cutting Length: 3100 mm • Cutting Angle: 2.75° • Clearance Between Columns: 3410 mm • Cutting Capacity: 20 mm • ELGO P40T 5.7” Touchscreen CNC Control Unit - 5.7” TFT touchscreen - Manual mode - Single cut operation - Program memory - Digital outputs up to 2A - Automatic cutting angle and clamping force calculation based on material - Automatic cutting program • Rear Sheet Support System - RTS (Return To Sender) function - Manual Blade Clearance Adjustment System - Programmable Backgauge Retract System - Automatic lifting for parts over 1000 mm Ppodozbyupopfx Ahgsu • CRONOSSTECH Motorized NC Controlled Backgauge (X Axis) - X axis movement: 1000 mm - Speed: 150 mm/sec - Accuracy: ±0.05 mm - Steel construction - Hardened ball screw - Optional: 1250 mm or 1500 mm travel • Front Support Arms - 1000 mm length - Ruler measurement system - T-slot - Flip-stop • Hinged Front Finger Guard - 1000 mm hinged front guard cover - Optional full-length opening guard • Upper Blade - 2 cutting edges - 450 N/mm² capacity • Lower Blade - 4 cutting edges - 450 N/mm² capacity • Foot Pedal with Emergency Stop • Rear Safety System (EOS2E 2BX) - 2 laser beams - Type 2 – SIL1 – SILCL1 safety level - 510 mm monitoring height - 3 ms response time - IP65 / IP67 protection - 24V DC power supply • Emergency Stop Buttons • Shadow Line Lighting • Ball Transfer Table • Schneider or Siemens Electrical Components (400V / 50Hz) • CRONOSSTECH Premium Front and Rear Cabin Guards - Professional appearance - Wide viewing area - Ergonomic design • Rexroth Hydraulic System • Dual-Speed Cutting System - Two selectable cutting speeds - Faster operation on short parts - High-speed cutting up to 60% of maximum capacity • Energy-Efficient Standby Mode Optional Features • 1250 mm or 1500 mm X-axis backgauge • Full-length opening front guard Technical Specifications • Cutting Capacity (450 N/mm²): 20 mm • Cutting Capacity (700 N/mm²): 13 mm • Cutting Length: 3100 mm • Cutting Angle: 2.75° • Number of Hold-Down Cylinders: 17 • Cutting Speed / Fast Mode: 6 / 9 spm • Clearance Between Columns: 3410 mm • Table Height: 925 mm • Table Width: 605 mm • Throat Depth: 250 mm • Backgauge Stroke (X Axis): 1000 mm • Machine Length: 4790 mm • Machine Width: 3850 mm • Machine Height: 2540 mm • Oil Tank Capacity: 495 L • Motor Power: 37 kW • Machine Weight: 19 Tons This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Būklė: naujas, Gamybos metai: 2026, galia: 7,5 kW (10,20 AG), spaudimo jėga: 100 t, eigos ilgis: 260 mm, darbinis greitis: 10 mm/s, atbulinės eigos greitis: 135 mm/s, gerklės gylis: 410 mm, ramplokštės ilgis: 2 600 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, HPB B100-2600 – 100 Ton x 2600 mm CNC Hydraulic Press Brake Standard Features Stroke: 260 mm Open Height (Daylight): 465 mm Throat Depth: 410 mm Bending Length: 2600 mm Distance Between Frames: 2150 mm ESA S830 CNC Control Unit (3-4 Axis) 10” 2D Touch Graphic Display Manual bending sequence and collision detection Angle correction calculation (crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Backgauge System X-axis travel: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis travel: 250 mm Heavy-duty welded steel frame Hardened ball screw Hardened linear guide system Optional 1000 mm X-axis travel Backgauge Fingers 2 units Flat type 3 position (10 mm / 20 mm / 30 mm) Manual Z-axis movement Sheet sag prevention construction European Style Quick Tool Clamping System (Promecam E7) Fast tool change Safe operation User-friendly and time-saving design CRONOSSTECH Special Narrow Bottom Table 70 mm or 90 mm bottom table T-slot can be machined depending on tooling requirement Standard Top Punch ES1260 Punch height: 67 mm Punch angle: 85° Radius: 0.8 mm Material: C45 Max. capacity: 100 Ton/Meter Compatible with Amada Standard Bottom Die ES2067 4-V opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Max. capacity: 80 Ton/Meter Compatible with Amada B Series Open Frame Design Black plexiglass protective panels Wide field of view Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting VDE standard electrical panel Schneider or Siemens electrical components Hoerbiger (HAWE) hydraulic manifold Eckerle hydraulic pump Siemens drive Energy-saving Standby function Front Support Arms 2 standard sliding front support arms Pedpfozbyt Sex Ahgspu Height adjustable Integrated scale measurement system Operator assistance Optional Features CT-BEND Servo Motorized X + R Axis Backgauge System Servo motor X and R axis movement X-axis travel: 750 mm Accuracy: ±0.05 mm X-axis extendable up to 1000 mm CNC Controlled Motorized Crowning System MVD wedge and G.E.C. motorized system Auto-calculation by CNC Faster setup time Higher bending accuracy Longer machine lifespan AKAS (FPSC) Front Safety Laser System + Rear Light Curtain Laser-based finger protection system Enhanced operator safety Fast detection and response CE compliant Max. working distance: 4.3 meters Technical Specifications Bending Force: 100 Ton Bending Length: 2600 mm Distance Between Frames: 2150 mm Stroke: 260 mm Open Height (Daylight): 465 mm Throat Depth: 410 mm Table Height: 885 mm Machine Length: 4220 mm Machine Width: 2230 mm Machine Height: 2950 mm Approach Speed: 200 mm/s Working Speed: 10 mm/s Return Speed: 135 mm/s Oil Tank Capacity: 170 L Weight: 6430 kg Main Motor Power: 7.5 kW Backgauge X-axis Speed: 300 mm/s Backgauge R-axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Būklė: naujas, Gamybos metai: 2026, galia: 5,5 kW (7,48 AG), spaudimo jėga: 100 t, eigos ilgis: 210 mm, darbinis greitis: 10 mm/s, atbulinės eigos greitis: 135 mm/s, gerklės gylis: 40 mm, ramplokštės ilgis: 2 100 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, HPB B100-2100 – 100 Ton x 2100 mm CNC Hydraulic Press Brake Standard Features Stroke: 260 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Bending Length: 2100 mm Distance Between Uprights: 1600 mm ESA S630 CNC Control Unit (3-4 Axis) 10” 2D touchscreen graphic display Manual bend sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2x USB ports Offline programming software CT-BEND Servo Motorized X Axis Backgauge System X axis travel: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R axis movement: 250 mm Heavy-duty steel frame construction Hardened ball screw Hardened linear guide system Optional X axis travel up to 1000 mm Backgauge Fingers 2 pieces Flat type 3-position (10 mm / 20 mm / 30 mm) Manual Z axis adjustment Sheet sag prevention structure European Type Quick Tool Clamping System (Promecam E7) Quick tool change Safe operation Practical and time-saving design CRONOSSTECH Custom Narrow Bottom Table 70 mm or 90 mm bottom table T-slot can be applied according to tools used Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Compatible with Amada Standard Lower Die ES2067 4-groove V opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Compatible with Amada B Series Open Frame Design Black plexiglass guard panels Wide field of view Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting VDE standard electrical panel Schneider or Siemens electrical components Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens drive Energy-saving standby function Front Support Arms 2 standard sliding front support arms Height adjustable Scale measurement system Supports the operator Optional Features CT-BEND Servo Motorized X + R Axis Backgauge System Servo motorized X and R axis movement X axis travel: 750 mm Accuracy: ±0.05 mm X axis extendable up to 1000 mm AKAS II Front Safety Laser System + Rear Light Barriers Finger protection system Laser-based safety system Enhances operator safety CE compliance Max working distance: 4.3 meters Delem DA66T CNC Control Unit (17” Touchscreen) 17” 2D touchscreen graphic display 2D drawing and 3D visualization / product simulation User-friendly interface 1 GB hard drive Automatic bend sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction Podpfxozbrf Tj Ahgopu Windows-based operating system 2x USB ports Data backup Offline Profile-TL programming functionality Technical Specifications Bending Force: 100 Ton Bending Length: 2100 mm Distance Between Uprights: 1600 mm Stroke: 210 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 170 L Machine Weight: 5000 kg Main Motor Power: 5.5 kW Backgauge X Axis Speed: 300 mm/s Backgauge R Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Būklė: naujas, Gamybos metai: 2026, galia: 5,5 kW (7,48 AG), spaudimo jėga: 60 t, eigos ilgis: 210 mm, darbinis greitis: 10 mm/s, atbulinės eigos greitis: 135 mm/s, gerklės gylis: 410 mm, ramplokštės ilgis: 2 100 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, HPB B60-2100 – 60 Ton x 2100 mm CNC Hydraulic Press Brake The HPB B60-2100 CNC Hydraulic Press Brake, manufactured by CRONOSSTECH in Turkey, has been developed for precise sheet metal bending applications with a bending force of 60 tons and a bending length of 2100 mm. Standard Features - Stroke: 260 mm - Open Height (Daylight): 465 mm - Throat Depth: 410 mm - Bending Length: 2100 mm - Distance Between Columns: 1600 mm - ESA S630 CNC Control Unit (3+1 Axis) - 10” 2D touch graphical display - Manual bending sequence and collision detection calculation - Angle correction calculation (Crowning) - Angle measurement and correction - 2D drawing support - 2 x USB ports - Offline programming software - CRONOSSTECH Servo Motorized X Axis Backgauge System - X Axis Travel: 750 mm - Speed: 250 mm/sec - Accuracy: ±0.05 mm - Manual R axis travel: 250 mm - Steel body construction - Hardened ball screw - Hardened linear guide system - Optional 1000 mm X axis travel Backgauge Fingers - Quantity: 2 - Straight type - 3-step (10 mm / 20 mm / 30 mm) - Manual Z axis movement - Structure preventing sheet sagging European Type Quick Tool Clamping System (Promecam E7) - Fast tool change - Safe operation - Practical and time-saving structure CRONOSSTECH Special Narrow Lower Table - 70 mm or 90 mm lower table - T-slot can be applied depending on tools used Standard Upper Tool ES1260 - Tool Height: 67 mm - Tool Angle: 85° - Radius: 0.8 mm - Material: C45 Psdpfezbrfasx Ahgopu - Max Capacity: 100 Ton/Metre - Amada compatible Standard Lower Tool ES2067 - 4-channel V opening (16-22-35-50 mm) - Tool Height: 60 mm - Tool Angle: 85° - Material: C45 - Max Capacity: 80 Ton/Metre - Amada compatible B Series Open Cabin Design - Black plexiglass safety panels - Wide viewing area - Professional appearance - Ergonomic design Additional Equipment - Single pedal system (P2) - GIVI linear scales - Upper beam LED lighting - Electrical panel compliant with VDE standards - Schneider or Siemens electrical components - Hoerbiger (HAWE) hydraulic block - Eckerle hydraulic pump - Siemens drive - Energy-saving standby feature Front Support Arms - 2 standard sliding front support arms - Height adjustable - Ruler measuring system - Provides support to the operator Optional Features - Servo Motorized X + R Axis Backgauge System - Servo-driven X and R axis movements - X axis travel: 750 mm - Accuracy: ±0.05 mm - X axis extendable up to 1000 mm AKAS II Front Safety Laser System + Rear Light Barriers - Finger protection system - Laser-based safety system - Enhances operator safety - CE compliant - Maximum operating distance: 4.3 metres Delem DA53T CNC Control Unit (15” Touch) - 15” colour touchscreen - 2D product drawing and simulation - Angle correction calculation - Angle measurement and correction - USB data transfer - Data backup - Offline profile-TL programming - Remote access and troubleshooting Technical Specifications - Bending Force: 60 Ton - Bending Length: 2100 mm - Distance Between Columns: 1600 mm - Stroke: 260 mm - Open Height (Daylight): 465 mm - Throat Depth: 410 mm - Table Height: 870 mm - Machine Length: 3660 mm - Machine Width: 2175 mm - Machine Height: 2820 mm - Approach Speed: 160 mm/sec - Return Speed: 135 mm/sec - Bending Speed: 10 mm/sec - Oil Tank Capacity: 170 L - Machine Weight: 4290 kg - Main Motor Power: 5.5 kW - Backgauge X Axis Speed: 300 mm/sec - Backgauge R Axis Speed: 250 mm/sec This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Būklė: naujas, Gamybos metai: 2026, galia: 22 kW (29,91 AG), spaudimo jėga: 270 t, eigos ilgis: 260 mm, darbinis greitis: 10 mm/s, atbulinės eigos greitis: 120 mm/s, gerklės gylis: 410 mm, ramplokštės ilgis: 3 100 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, HPB B270-3100 – 270 Ton x 3100 mm CNC Hydraulic Press Brake Manufactured in Turkey by CRONOSSTECH, the HPB B270-3100 CNC Hydraulic Press Brake is engineered for heavy industry, steel construction, machinery manufacturing, and precision sheet metal forming applications, offering 270 tons of bending force and a 3,100 mm bending length. Standard Features Stroke: 260 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Bending Length: 3,100 mm ESA S830 CNC Control Unit (3-4 Axes) 10” 2D touch graphical display Manual bend sequence and collision calculation Automatic crowning compensation Angle measurement and correction 2D drawing support 2 x USB ports Offline programming software Servo-driven X-Axis Backgauge System X-axis travel: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm R-axis travel: 250 mm Heavy-duty steel frame construction Hardened ball screw Hardened linear guide system Optional 1,000 mm X-axis travel Backgauge Fingers 2 pcs Flat type 3-stage adjustment (10 mm / 20 mm / 30 mm) Manual Z-axis movement Deflection-resistant design European Type Quick Tool Clamping System (Promecam Style) Quick tool change Secure locking system User-friendly operation European Narrow Bottom Table 70 mm or 90 mm custom lower table Optional T-slot for tooling Standard Top Punch ES1260 Punch height: 67 mm Punch angle: 85° Radius: 0.8 mm Material: C45 Max capacity: 100 Ton/Meter Amada compatible Standard Bottom Die ES2067 4-groove V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Max capacity: 80 Ton/Meter Amada compatible B Series Open Cabin Design Black plexiglass safety panels Wide field of view Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting VDE standard electrical cabinet Schneider or Siemens electrical components High-quality hydraulic block system Eckerle hydraulic pump Siemens main drive Energy-saving standby function Front Support Arms Pjdpfszbrc Ssx Ahgspu 2 standard sliding front support arms Height adjustable Metric ruler system Optional Features Servo-driven X + R-Axis Backgauge System Servo-controlled X-axis movement X-axis travel: 750 mm Accuracy: ±0.05 mm R-axis travel: 250 mm Hardened linear guides and ball screw system X-axis can be extended up to 1,000 mm CNC Controlled Motorized Crowning System Motorized wedge system Automatic calculation via CNC Faster setup times Higher bending precision Longer machine lifespan Front Safety Laser System + Rear Light Curtains Laser-based finger protection system Enhances operator safety Rapid detection and response Maximum working distance: 4.3 meters Technical Specifications Bending Force: 270 Ton Bending Length: 3,100 mm Distance Between Columns: 2,600 mm Stroke: 260 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Table Height: 960 mm Machine Length: 4,840 mm Machine Width: 2,500 mm Machine Height: 3,040 mm Approach Speed: 150 mm/s Return Speed: 120 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 290 L Machine Weight: 12,300 kg Main Motor Power: 22 kW Backgauge X-Axis Speed: 300 mm/s Backgauge R-Axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Būklė: naujas, Gamybos metai: 2026, galia: 7,5 kW (10,20 AG), spaudimo jėga: 100 t, eigos ilgis: 260 mm, darbinis greitis: 10 mm/s, atbulinės eigos greitis: 200 mm/s, gerklės gylis: 410 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, HPB B100-3100 – 100 Ton x 3100 mm CNC Hydraulic Press Brake The HPB B100-3100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is engineered for precise and repeatable sheet metal bending operations with a bending force of 100 tons and a bending length of 3100 mm. Pedpfxszbrb Io Ahgjpu Equipped with an ESA S830 CNC control unit, servo-driven backgauge system, high-rigidity frame structure, and professional tooling, it offers high performance for metalworking and industrial production facilities. Standard Features Stroke: 260 mm Open height (Daylight): 465 mm Throat Depth: 410 mm Bending Length: 3100 mm ESA S830 CNC Control Unit (3-4 Axes) 10” 2D touchscreen graphical display Manual bend sequencing and collision control calculation Angle correction calculation (crowning) Angle measuring and correction 2D drawing support 2 USB ports Offline programming software CRONOSS Servo Motorized X-R Axis Backgauge System X-axis travel distance: 750 mm X-axis speed: 250 mm/s Precision: ±0.05 mm R-axis travel distance: 250 mm Robust steel frame construction Hardened ball screw Linear guide system Option to extend X-axis travel up to 1000 mm Backgauge Fingers 2 pieces Flat type 3-step (10 mm / 20 mm / 30 mm) Manual Z-axis movement European Type Quick-clamping Promecam Upper Tool Holder E7 Quick tool change Safe operation Practical and ergonomic design CRONOSS Special Narrow Bottom Table 70 mm or 90 mm bottom table depending on machine tonnage T-slot available upon request Standard Upper Punch ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Max capacity: 100 Ton/Meter Standard Lower Die ES2067 4-groove V-opening (16-22-35-50 mm) Die angle: 85° Die height: 60 mm Material: C45 Max capacity: 80 Ton/Meter B Series Open Frame Guarding CRONOSS Premium open cabin Black plexiglass safety panels Wide field of view Ergonomic design Single Pedal System (P2) GIVI Linear Scales LED Lighting VDE Electrical Panel Schneider or Siemens Electrical Components Hoerbiger (HAWE) Hydraulic Block Eckerle Hydraulic Pump Siemens Drive Energy-efficient Standby Function 2 Standard Sliding Front Support Arms Height adjustable Ruler-based measurement system Operator support system Optional Features CT-BEND Servo Motorized X+R Axis Backgauge System Full automatic movement on X and R axes Manual movement on Z1 and Z2 axes X-axis extendable up to 1000 mm CNC-Controlled Motorized Crowning System CRONOSS wedge-type mechanism G.E.C. motorized structure Automatic calculation via CNC More precise and homogenous bending No operator intervention required AKAS FPSC Front Safety Laser System + Rear Light Curtain CE-compliant safety system Finger protection function Max working distance: 4.3 meters Technical Specifications Bending Force: 100 Ton Bending Length: 3100 mm Distance Between Columns: 2600 mm Stroke: 260 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 905 mm Machine Length: 4670 mm Machine Width: 2230 mm Machine Height: 2950 mm Approach Speed: 200 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 180 L Machine Weight: 6780 kg Main Motor Power: 7.5 kW Backgauge X-Axis Speed: 300 mm/s Backgauge R-Axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷