Compactsystem Martina 55 pirkti naudotą (6 586)

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are an ideal solution for energy recovery in wood-processing industrial and craft businesses. They are designed to heat large areas, such as workshops and working spaces in trade and industrial operations. These hot air systems require no lengthy warm-up phases and can heat up workshop halls of joineries or carpentries, as well as other production facilities, in a very short time. Isdpfx Asvz Hq Hsf Hsif Solid wood and its by-products (e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes) serve as fuel materials. The MARTINA hot air furnaces comply with EU Directive 98/37CE and Italian Presidential Decree No. 459 dated July 24, 1996, as well as the safety directive of 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission stages according to the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output Kcal: 43,000 - Fuel consumption: 15 kg/h - Air output: 4,900 m3/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 1,000 m3 - Heatable area: approx. 220 m2 - Space requirement: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (collar): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney discharge pressure: 13 PA - Flue gas temperature: 290°C - Hot air outlet spigots: 2 x Ø 200 mm - For additional technical data, please refer to the attached data sheet The two pipes for outgoing hot air are located at the lower part of the rear side of the furnace. A maximum of 20 meters of ducting per spigot is permitted for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Warm Air Furnace MARTINA 120 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger areas, such as workshops and production halls in both craft and industrial operations. These warm air systems require no lengthy preheating times and are capable of warming up joinery or carpentry workshops and other production facilities in a very short period. The furnace can be fueled with solid wood and its by-products, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline of Directive 89/392/EEC. All warm air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) fulfill both stages of the emission limits required by the 1st Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air performance: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Warm air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2–0.3 mbar - Flue draught at nominal load: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Required space: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Chimney diameter (recommendation): 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C - Warm air outlet nozzles: 2 x Ø 220 mm - For further data, please refer to the enclosed data sheet Iijdpfx Afovz Hhxe Hef The two pipe connectors for outgoing warm air are located at the rear bottom side of the furnace. A maximum pipe length of 20 meters per nozzle is permitted for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger utility spaces such as workshops and workspaces in craft and industrial enterprises. Iijdpfsvz Hq Tox Af Hof These hot air systems require no extended heat-up phases and can quickly warm up joinery, carpentry, or other production facilities. Solid wood and its by-products—e.g., solid wood board offcuts, chips, sawdust, pellets, or briquettes—serve as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety provisions of Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of required emission values according to the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output (kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m³/h - Firebox depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at rated load: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heat coverage area: approx. 300 m² - Space requirement: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue connection diameter: 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 291°C - Hot air outlet port: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connections for the air outlet are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total connected load: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and craft businesses. They are designed for heating large usable spaces such as workshops and production areas in craft or industrial enterprises. These hot air systems do not require long heating-up phases and are capable of rapidly warming up joinery and carpentry workshops or other production facilities. The units can burn solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of 24 July 1996, and safety guideline 89/392/EEC. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output (kcal): 199,000 - Fuel consumption: 50 kg/h - Airflow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air fan: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Nominal output draft requirement: 0.18 mbar - Heatable volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space required: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90 % - Chimney fan pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet connections: 2 x Ø 450 mm - Further data available in the attached data sheet Iijdsvz Hqgepfx Af Hsf The two duct connections for outgoing hot air are located on the lower rear side of the unit. A maximum of 20 meters of duct per outlet is allowed for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed to heat larger usable spaces such as production halls and work areas in trade and industrial facilities. These hot air systems require no lengthy heat-up phases and can quickly warm up carpentry or joinery workshops as well as other manufacturing sites. Fuel types include solid wood and its by-products, such as remnants of solid wood boards, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety directive of Equipment 89/392/CE. All MARTINA series hot air furnaces (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission threshold stages required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air mode - Thermal output: 29.8 kW - Thermal output (Kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox underpressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 600 m³ - Heatable surface area: approx. 120 m² - Footprint: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg Iiodpovz Hqmjfx Af Hsf - Flue outlet diameter (collar): 160 mm - Chimney diameter (reference value): 200 mm - Efficiency: 85–90% - Chimney draft: 11 Pa - Exhaust gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet The two pipe collars for the outgoing hot air are located on the rear side of the furnace in the lower section. A maximum pipe length of 20 metres is permitted per collar for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger functional areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems require no long heat-up phases and warm up the workshop or production hall—such as those in carpentry, joinery, or other manufacturing environments—in a very short time. Suitable fuels include solid wood and its by-products, e.g. solid wood board offcuts, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated 24 July 1996, and the safety directive of installation 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, 350) meet both emission stages required by the 1st BImSchV (Federal Emission Control Ordinance). Isdpfevz Hqtsx Af Heif - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 Kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Hot air outlet connectors: 2 x Ø 200 mm - For further specifications, please refer to the attached data sheet The two duct connectors for warm air outlet are located at the lower rear side of the unit. A maximum pipe length of 20 meters per connector is permitted for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft businesses. They have been developed for heating large utility areas, such as workshops and working spaces of trade and industrial enterprises. These hot air systems require no long heat-up phases and heat up woodworking shops, carpentries, and other production areas within a very short time. The furnaces can use solid wood and its by-products as fuel, e.g. solid wood panel residues, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and safety guideline Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of emission limits stipulated by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm Ijdpfx Aovz Hqyof Heif - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2–0.3 mbar - Flue draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space requirement: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connection): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85–90% - Chimney draft: 11.5 Pa - Flue gas temperature: 289°C - Hot air discharge nozzles: 2 x Ø 450 mm - For additional data, please refer to the data sheet. The two pipe fittings for outgoing hot air are located at the rear of the furnace near the bottom. For each pipe fitting, a maximum pipe length of 20 meters is allowed for air distribution. Longer lengths are optionally available upon arrangement with the manufacturer. Please contact us for more details.

Būklė: labai geros būklės (naudotas), Katalogo numeris 6825 TECHNINIAI DUOMENYS - Užpildymo piltuvo matmenys (ilgis/plotis): 900x630 mm - Rotoriaus darbinis plotis: 540 mm - Variklis: 7,5 kW - Sieto skersmuo: 20 mm - Peilio matmenys: 40x40 mm - Peilių skaičius: 15 vnt. - Autoreversas - Prispaudimo stalčius - Matmenys (ilgis/plotis/aukštis): 2060x980x1580 mm - Svoris: 1008 kg PRIVALUMAI – Vokiečių gamyba – Neperdažytas – Labai gera būklė – Naudotas smulkintuvas Grynoji kaina: 31 900 PLN Grynoji kaina: 7 590 EUR Grynoji kaina apskaičiuota pagal 4,2 PLN/EUR kursą Ijdpsztat Isfx Af Hoif (Kursui stipriai svyruojant, kaina gali keistis)

Būklė: labai geros būklės (naudotas), Parduodamas „SEW-EURODRIVE MOVIDRIVE®“ keitiklis su galios moduliu MDX60A0550-503-4-00. Tai dažnio keitiklis, kurio galia – 55 kW, skirtas trifaziams 3 × 380–500 V varikliams maitinti. Parametrai atitinka „MOVIDRIVE B“ seriją. Iijdpfxozphcps Af Hef Techniniai duomenys Valdymo blokas Gamintojas: „SEW-EURODRIVE“ Modelis: MDX61B0550-503-4-00 Valdiklio tipas: MDX61B-00/0T Dalies numeris: 08279691 Valdymo bloko dalies numeris: 08249571 Serijos numeris: 0159828 Užsakymo numeris: 01.1569277601.0001.08 Apsaugos laipsnis: IP00 Gamintojo šalis: Vokietija („Pagaminta Vokietijoje“) Galios modulis Modelis: MDX60A0550-503-4-00 Prekės numeris: 8226636 Numeris: 0588043 Įėjimo parametrai Maitinimas: 3 × 380–500 V AC ±10 % Dažnis: 50–60 Hz ±5 % Įėjimo srovė: 94,5 A (400 V) Darbinė temperatūra: 0–40 °C Apsaugos laipsnis: IP10 Išėjimo parametrai Įtampa: 3 × 0–500 V Dažnis: 0–180 Hz Išėjimo srovė: 105 A (400 V) Aktyvioji galia: 73,5 kVA Rekomenduojama variklio galia: 55 kW Papildoma informacija Remontas atliktas „SEW EURODRIVE Werk Wien“ Remonto numeris: 14584 Remonto data: 2012 m., 24 savaitė Pabaigos patikra: 2012 m., 24 savaitė Būklė Įrenginys patikrintas ir visiškai veikia. Vizualinė būklė gera, matomi įprasti naudojimo pėdsakai. Visos jungtys ir gnybtai yra pilni ir atitinka nuotraukose pateiktą informaciją. Parduodamas būtent tas komplektas, kuris matomas nuotraukose.

Būklė: geras (naudotas), The scope of delivery includes: 01x pallet racking beam, used Color: orange IPE profile: 100 x 55 mm Connector: 3 holes Ijdpfx Afsibzfte Hjif Clear span: approx. 2,700 mm Each connector with 3 holes Hole spacing: approx. 100 mm Hole diameter: approx. 11 mm 01x set of fastening material consisting of: 06x M10 bolts 06x nuts 06x washers

Būklė: geras (naudotas), Techniniai duomenys apie padėklinio stelažo skersinį: Stelažo sistema: Jung Heinrich Tipas: Esmena Į komplektą įeina: 01x padėklinio stelažo skersinis, naudotas Medžiagos spalva: žalia Profilio matmenys: 155 x 55 mm Kabliukų kiekis: 4 Isdpsw Upxwofx Af Hoif Vidinis ilgis: 3 610 mm 02x saugos kaištis, naudotas Aprašymas: pilnai cinkuotas Skirta išilginių sijų apsaugai nuo netyčinio ištraukimo Jūsų kontaktiniai asmenys mūsų įmonėje: Ponas: Andre Evering Ponas: Mario Klöver Ponas: Falk Deutsch Bendra informacija apie prekę: Ši prekė siūloma tik atsiėmimui. Jeigu pageidaujate transporto ar siuntimo, taikomi papildomi mokesčiai, kurie priklausomai nuo pristatymo vietos ar apimties gali būti patikslinti atskirai.

Būklė: geras (naudotas), Techniniai duomenys apie padėklų stelažo skersinę: Stelažo sistema: SLP Komplektacijoje yra: 01x padėklų stelažo skersinė, naudota Medžiagos spalva: pilka IPE profilis: 100 x 55 mm Kabliukas: 3 HK (kablio tipas) Šviesus tarpas: 3 000 mm 02x apsauginiai kaiščiai, naudoti Apdirbimas: visiškai cinkuoti Skirti skersiniams apsaugoti nuo nepageidaujamo iškėlimo Jūsų kontaktai mūsų įmonėje: Iiedpfx Aexnzdkef Hof Ponas: Andre Evering Ponas: Mario Klöver Ponas: Falk Deutsch Bendra informacija apie prekę: Ši prekė siūloma tik atsiimant. Pageidaujamas transportavimas arba siuntimas susijęs su papildomomis išlaidomis, kurias galima atskirai sužinoti priklausomai nuo pristatymo vietos ir apimties.

Būklė: geras (naudotas), Techniniai duomenys apie padėklinių stelažų sijas: Stelažų sistema: SLP Pristatymo komplektacijoje yra: 01x Padėklinio stelažo sija, naudota Medžiagos spalva: pilka INP profilis: 100 x 50 mm Kabliukų skaičius: 3 HK (kabliai) Grynasis ilgis: 2 000 mm 02x Fiksavimo kaištis, naudotas Tipas: pilnai cinkuoti Skirti išilginėms sijoms apsaugoti nuo netyčinio iškėlimo Jūsų kontaktiniai asmenys mūsų įmonėje: Ponas: Andre Evering Ponas: Mario Klöver Ponas: Falk Deutsch Bendra informacija apie prekę: Ši prekė siūloma tik atsiėmimui. Jei pageidautumėte transportavimo ar išsiuntimo paslaugos, tai būtų papildomai apmokestinta pagal pristatymo vietą arba kiekį. Dėl tokių paslaugų maloniai prašome kreiptis į mus atskirai. Iedpfx Aexyvznof Hsif

Būklė: geras (naudotas), Included in the scope of delivery: Iedpjibzgxjfx Af Hjif 01x pallet racking beam, used Material color: orange IPE profile: 100 x 55 mm Connector cleat: 5 holes Clear span: approx. 2,700 mm Each connector cleat: 5 holes Hole spacing: approx. 50 mm Hole diameter: approx. 11 mm 01x set of fastening hardware consisting of: 10x M10 bolts 10x nuts 10x washers

Gamybos metai: 2007, būklė: labai geros būklės (naudotas), vertical centrifugal pump vertical centrifugal pump 30 m³/h chemical pump FIP ALPHA VCM 50-33 Year of manufacture: 2007 DN: 50 Nominal flow rate: 30 m³/h Nominal head: 25 m Pressure rating: 16 bar Temperature [°C]: -25 to +140 Speed: 1450 rpm Electric power: 11 kW 400V 50Hz Motor speed: 1450 rpm Length: 1550 mm Width: 550 mm Design: Vertical, radially split volute casing pumps, sump pump or channel impeller Applications: Handling of paints, aggressive and process liquids, also suitable for media containing solid particles, for use in the chemical and petrochemical industry. If you need further information, we are here to help! Please contact us via the contact form or give us a call. This listing was automatically translated. Translation errors may be possible. Iedpfxoh T Dwfo Af Hjif

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1990, Electric Pallet Truck Lafis LEH 55 Model: LEH 55 P Capacity: 5,500 kg Year of manufacture: 1990 Forks / Platform: 2,500 mm x 1,000 mm Drive motor: 290 W Hydraulics: 2,000 W Battery: 24 V Complete with battery and charger Lifting height: 200 mm Battery pack: Banner PSS 320, year of manufacture 2015 Iiedpfxsrgragj Af Hjf

Gamybos metai: 1993, būklė: naudotas, Material: Mild steel Drive motor: 55 kW Dimensions: approx. L 1600 mm x W 1000 mm x H 900 mm Net weight: approx. 1500 kg Ijdogb D Hiepfx Af Hsif Delivery rate: 14.5 m³/h Max. operating pressure: 100 bar Technical documentation: No Note: Piston diameter: 57 mm, Number of strokes: 326 1/min, Stroke length: 105 mm

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, keliamoji galia: 1 600 kg, Kartoninių dėžių spaustuvas ISO klasė: ISO klasė 3 = 2 500 – 4 999 kg Iijdpfet S Nwaex Af Hof Techninė būklė: gera Aprašymas: ISO 3A (51 cm) Keliamoji galia 1 600 kg Atidarymo diapazonas 550-1960 mm Spaustuvo ilgis 950 mm Spaustuvo aukštis 1 200 mm Plotis 950 mm ID OS918

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2007, Horizontal conveyor LISEC KFL-55/22 Max. glass width: 2200 mm Motorized With rollers Overall dimensions: L 5800 x W 2300 mm Year of manufacture: 2007 In very good and clean condition Good working order, tested Iijdpfxsiy Dh He Af Hof Immediately available

Būklė: naudotas, Naudotas „Envites“ modelio K800/55-50/30 tipo kamerinis filtro presas. Filtracijos paviršius: 49,5 kv. m. Kameros ir plokštės: 50 kamerų, 30 mm storio, (49) polipropileno 800 x 800 mm įleidžiamos plokštės ir (2) galinės plokštės. Sąnaudos: apie 673,5 litro. Kita: didžiausias filtracijos slėgis – 16 bar, uždaras tiekimas, (5) skylės vienoje plokštėje, dvipusis hidraulinis stūmoklis su hidrauliniu agregatu, plokščių perjungėjas, CE ženklas, ES atitikties deklaracija, pateikta išsami techninė dokumentacija. Iedpfx Ajzun Dwsf Hjif Techninės specifikacijos: Medžiaga: anglinis plienas / polipropilenas Plokštės dydis: 800 x 800 Plokščių skaičius: 49 Tiekimas: uždaras Skylių skaičius: 5 Sąnaudos: 670 Plokštės tipas: įleidžiama Plokštės storis: 60 Paviršiaus plotas: 49,5 Uždarymo būdas: hidraulinis Darbinis slėgis: 16 Svoris: 5500

Būklė: labai geros būklės (naudotas), Vecoplan Wood Chipper for Sawmill Offcuts Hacker 55 / 26 / 2 - German-made - Auto-reverse - For the production of industrial wood chips - Heavy-duty shaft with 650 mm diameter TECHNICAL SPECIFICATIONS: - Slot width: 550 mm - Infeed height: 260 mm - Two knives - Motor power: 110 kW - Conveyor belt length: 5000 mm - Screen: 50 x 50 mm - Three upper toothed feed rollers - Four lower toothed feed rollers - Rotor width: 650 mm - Rotor diameter: 650 mm - Hydraulic lifting of feed rollers - Infeed height from the base: 1100 mm Transport dimensions: 1100 x 245 x 240 cm Iijdpfjihpg Ejx Af Hof Weight: approx. 10 t

Gamybos metai: 1995, būklė: beveik kaip naujas (naudotas), Vecoplan VTH/55/15/2 Waste Wood Chipper Iodpfskth N Njx Af Hoif – Made in Germany – Auto-reverse function – Designed for the production of industrial wood chips – Year of manufacture: 1995 TECHNICAL SPECIFICATIONS: Feed opening width: 550 mm Feed opening height: 130 mm Two knives Motor power: 55 kW Conveyor length: 4,300 mm Screen: 50 x 50 mm Upper feed roller: toothed Lower feed roller: toothed Rotor width: 560 mm Rotor diameter: 560 mm Hydraulic lifting of feed rollers Transport dimensions (L/W/H): 550 / 230 / 120 cm Weight: approx. 3,000 kg

Būklė: naudotas, Gamybos metai: 2008, veikimo valandos: 85 394 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: APF 136194, bendras svoris: 2 550 kg, bendras ilgis: 2 900 mm, bendras plotis: 1 450 mm, bendras aukštis: 2 200 mm, vietos reikalavimas ilgis: 3 000 mm, reikalingas plotis: 1 600 mm, variklių gamintojas: ABB, kuro tipas: elektrinis, Sraigtinis kompresorius su dažnio keitikliu ATLAS COPCO ZT 55 VSD 18,5kW 3,35m3/min 13 barų Iedpfx Asy Amh Hof Hoif Profesionalus aptarnavimo lygis ir mūsų įmonės siūlomos aukštos kokybės, rinkoje „patikrintos“ prekės – garantuoja sėkmingą bendradarbiavimą su Jumis. Suteikiame garantiją naudotiems kompresoriams ir džiovintuvams! Mūsų privalumas – visą parą veikiantis kompresorių servisas. Sraigtinis kompresorius su dažnio keitikliu ATLAS COPCO GA18VSD 18,5kW 3,35m3/min 13 barų Techninės būklės geras, paruoštas darbui

Būklė: naudotas, didžiausias leistinas svoris: 34 422 kg, bendras svoris: 42 000 kg, ašių konfigūracija: 3 ašys, pirmoji registracija: 01/2024, kita apžiūra (TÜV): 01/2027, krovimo vietos ilgis: 10 149 mm, krovinių skyriaus plotis: 2 400 mm, krovos erdvės aukštis: 2 280 mm, krovinio erdvės tūris: 55 m³, bendras ilgis: 11 521 mm, bendras plotis: 2 550 mm, bendras aukštis: 3 672 mm, Gamybos metai: 2024, Įranga: ABS,

Būklė: naudotas, Gamybos metai: 1989, Formatavimo diskinis pjūklas Gamintojas: Martin Modelis: T 72 Pagaminimo metai: 1989 Techniniai duomenys Pjūklio disko minimalus skersmuo: 200 mm Pjūklio disko maksimalus skersmuo: 450 mm Sukimo greitis: 2800/4000/5500 aps./min. Įtampa: 380 V, 50 Hz Iodpezuyx Tjfx Af Heif Vardinė srovė: 18,0 A Pastaba: Techniniai duomenys ir aprašymai yra nukopijuoti iš to meto užsakymo patvirtinimo. Duomenys pateikiami informaciniu tikslu ir nėra privalomi.