Casolin Keturios Šoninės Obliavimo Staklės pirkti naudotą (51 234)

Būklė: naudotas, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Jointer table length: 2000 mm Feed motor: 4 kW Feed speed: 5-24 m/min 1 WEINIG Planer and Moulder Unimat 23 E ----- 6 spindles (2 of which are right-hand), reinforced motors, 8,000 rpm, ATS control system Machine will be cleaned and function-tested prior to delivery Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle, bottom, 5.5 kW (motor replaced) ----- Diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 125 - 180 mm Rabbetting unit incl. tooling Hardened table insert in front of 1st bottom spindle 2nd spindle, right, 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, left ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of left spindle, incl. spring-loaded side roller pressure 4th spindle, right, 8.3 kW (motor replaced) ----- Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle, top, 7.5 kW ----- Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Njdpfoxz Hh Usx Ah Uolb Split pressure shoe in front of top spindle, adjustable to tool swing diameter and swivelling away from tool, spring-loaded 6th spindle, bottom, 4.0 kW ----- Diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 112 - 250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm Spindles - General ----- All profiling spindles with high concentricity. Lubrication points for axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed steplessly adjustable 5–24 m/min Infeed roller in front of 1st bottom tool, pneumatically controlled high/low Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Feed roller adjustment relative to left spindle, axial 35 mm Machine electrics ----- Operating voltage: 440 V (voltage range 380 - 420 Volt), 50 Hz Machine base, tables, and fences ----- Jointer table 2.0 m long (incl. straight edge) Manual Waxilit pump for table de-resining One powered rubber roller (spring-loaded in outfeed table) Two powered rollers in machine table, hardened Machine operation ----- Pressure shoe in front of top spindle with mechanical digital indicator Ejection after top spindle with mechanical digital indicator ATS/system, automatic 2-axis positioning for spindles no. 3 and 5 Min. working height: 12 mm Electric height adjustment for top spindles and feed Centralized lubrication points located at machine front Electronic digital displays at spindle 3 and 5 (axial), spindle 6 (radial), and spindle 4 (axial and radial) Safety and sound insulation ----- Full safety enclosure Easily high...

Būklė: naudotas, Gamybos metai: 1989, Keturšalė obliavimo staklė FUTURA ROTOMAT 220/5 su penktąja frezavimo ašimi. Pagaminimo metai: 1989. Kaina ex works. Nedpfx Aexx Tb Njh Uslb

Būklė: naudotas, Gamybos metai: 2010, Velenų skaičius: 6 vnt. Darbinis plotis: 230 mm Obliavimo aukštis: 120 mm Išlyginamojo stalo ilgis: 2500 mm Padavimas: 5-25 m/min Matmenys (Ilgis/Plotis/Aukštis): 4700/1800/1100 mm Svoris apie 4.000 kg CASOLIN MEGA 230/6 keturpusė obliavimo staklė ----- 6 velenai, su jutikliniu ekranu valdymui. Plotis ir aukštis valdomi automatiškai. Nljdpfx Ajwmggkeh Usb Velenų išdėstymas: 1. velenas: apačioje, 40 mm skersmuo, 6.000 aps./min., 5,5 kW 2. velenas: dešinėje, 40 mm skersmuo, 6.000 aps./min., 11 kW (bendrai su) 3. velenas: kairėje, 40 mm skersmuo, 6.000 aps./min. 4. velenas: viršuje, 40 mm skersmuo, 6.000 aps./min., 7,5 kW 5. velenas: apačioje, 40 mm skersmuo, 8.000 aps./min., 5,5 kW 6. velenas: viršuje, 40 mm skersmuo, 8.000 aps./min., 5,5 kW Staklės parduodamos be apdirbimo įrankių. Papildomas ekranas mašinos priekyje nėra komplekte (priklauso langų gamybos linijai). Staklės jau išardytos ir sandėliuojamos. (Techninė informacija pagal gamintoją – be garantijos!)

Būklė: naudotas, Gamybos metai: 1980, Nr. 3192 Four-Side Planer WEINIG U 17 A Nlodpovkhccsfx Ah Uob Used, year of manufacture 1980, machine available from February 2025 Machine still in operation 6 spindles Spindle arrangement: bottom - right - left - top - bottom - bottom Working width: 170 mm (with tool diameter of 125 mm) Working height: 120 mm (with tool diameter of 125 mm) Jointing spindle: 4 HP All other spindles: 5.5 HP Feed drive: 2 or 3 HP Spindle speed: 6,000 rpm Working spindle diameter: 40 mm Minimum cutter block diameter for profiling spindles: 100 mm Maximum cutter block diameter for profiling spindles: 180 mm Continuously adjustable feed: 6 - 18 m/min Feed roller diameter (hardened): 140 mm Feed roller width: 50 mm Adjustment range for infeed table and right jointing fence: 10 mm Vertical spindle adjustment range below table: 40 mm Horizontal spindle axial adjustment range: 30 mm Surface table length: 2 m Sale on behalf of customer, ex location Upper Austria, without dismantling, without transport and assembly Subject to errors in description and price Dismantling, transport, and loading by us is optionally available To avoid potential misunderstandings, an on-site inspection by appointment is possible and recommended Sale is as-is Technical data, condition description, year of manufacture, and scope of delivery based on information from the manufacturer’s brochure and the previous owner, without guarantee Subject to prior sale No warranty on used machines; the sale is "as inspected" Pictures and videos are for example purposes and do not represent the actual delivery scope Payment terms: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location

Būklė: naudotas, Gamybos metai: 1989, Naudota mašina Nsdsw I U Uqopfx Ah Uslb Metų gamyba: 1989 Techniniai duomenys: Obliavimo stalo ilgis: 2100 mm Įrankinės veleno skersmuo: 30 mm Obliavimo galvučių skersmuo: 100 mm Obliavimo velenų sūkių skaičius: 6000 aps./min Darbinis plotis: 30 - 180 mm Darbinis aukštis: 6 - 120 mm Naudojant papildomai įsigyjamą mažesnę obliavimo galvutę kairiajai velenai ir siauresnius padavimo volelius, galima pasiekti minimalų pločio dydį – 15 mm Variklio galia apatinė, kairioji, dešinioji: kiekviena po 3,7 kW Viršutinės galvos (storyminio veleno) variklio galia: 5,5 kW Padavimo greitis: 6 ir 12 m/min Elektrinis aukščio reguliavimas 1/10 tipas valdymas Įskaitant obliavimo galvutes Dulkių nusiurbimo jungtys: 160/120/120/140 mm Galimybė: greitai pristatoma Sandėlio vieta: Flörsheimas

Būklė: naudotas, Gamybos metai: 1992, Used machine Year of manufacture: 1992 Technical specifications: Length of jointer table: 2,100 mm Diameter of tool spindle: 30 mm Diameter of planer heads: 100 mm Nljdpfexgkf Ujx Ah Uob Cutterhead speed: 6,000 rpm Working width: 30 – 180 mm Working height: 6 – 120 mm With an optionally available smaller planer head for the left spindle, plus narrower feed rollers, a minimum width of 15 mm can be achieved. Motor output bottom, left, right: 3.7 kW each Motor output top (thicknessing unit): 5.5 kW Feed speed: 6 and 12 m/min Electric height adjustment with 1/10-step control Including step-controlled infeed roller Including planer heads Extraction ports: 160/120/120/140 mm Availability: short notice Location: Flörsheim

Būklė: naudotas, Gamybos metai: 2014, Number of spindles: 5 units Working width: 230 mm Planing height: 120 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min Control: Memory function Weinig Powermat 600 Compact ----- Machine is cleaned and fully inspected. Short Summary: ----- - 5 spindles - Powerful motors - Left and top spindle controlled for width and height Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 10-120 mm Nledpfxjwzmu Ro Ah Ueb Number of spindles: 5 1st spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle: 125 - 145 mm Tool cutting circle rebate cutter: 130 - 160 mm Axial adjustment: 5 mm Rebate device MarathonCoatin for table insert before 1st lower tool holder Electronic digital display for radial adjustment 2nd spindle - right ----- Motor with brake: 11.0 kW Shared motor with left tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle 40 mm below table level: 93 - 200 mm Tool cutting circle 55 mm below table level: 93 - 180 mm Tool circle for straight knife cutterheads, max: 163 mm Max. tool diameter behind fence level: 180 mm Max. profiling depth: 35 mm Axial adjustment: 55 mm 3rd spindle - left ----- Motor with brake: Shared motor with 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle 40 mm below table level: 93 - 200 mm Tool cutting circle 55 mm below table level: 93 - 180 mm Tool circle for straight knife cutterheads, max: 163 mm Max. profiling depth: 35 mm Axial adjustment: 55 mm Radial CNC-controlled spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle: 93 - 200 mm Tool circle for straight knife cutterheads, max: 180 mm Max. profiling depth: 35 mm Axial adjustment: 40 mm Radial CNC-controlled spindle Split pressure shoe in front of upper tool holder, adjustable to tool cutting circle and swiveling away from tool, spring-loaded. Pressure shoe before and discharge after the upper spindle with electronic digital displays, integrated in the memory function or PowerCom. 5th spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle: 93 - 200 mm Max. profiling depth: 15 mm Axial adjustment: 35 mm Feed system ----- Electronic feed, infinitely adjustable with brake: 4 kW, 5 - 30 m/min Feed roller before 1st lower tool is pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Axial adjustment of feed rollers against left tool holder: 35 mm Machine electrics ----- Operating voltage: 400 V (voltage range 380 - 420 Volt), 50 Hz All spindles IE 2 version Electrical design according to DIN VDE 0113, electrical equipment for industrial machinery EN60204, IEC-204-1. Other electrical regulations not considered. Mach...

Būklė: naudotas, Gamybos metai: 1980, with 7 spindles Nledjvwfqdepfx Ah Ueb with universal spindle used Make: Weinig Model: U17A Year of manufacture: 1980 Machine no.: 11881959 Spindle arrangement: bottom-top-left-right-top-bottom-universal Motors: 4.0 - 3.0 - 5.5 - 7.5 - 5.5 - 4.0 - 4.0 kW Planing width: approx. 170 mm Planing height: approx. 120 mm Spindle diameter: 40 mm Pneumatic pressure rollers Feed before jointer Infinitely variable feed speed Extraction port: 7 x 120 mm Overall dimensions: approx. 5200 mm x 1400 mm x 1500 mm Weight: approx. 3000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-is condition, as inspected without warranty or guarantee

Būklė: naudotas, Gamybos metai: 1987, with reversible knives – fitted with indexable insert cutterheads used, good condition Manufacturer: Weinig Model: Profimat P22M Year of manufacture: 1987 Machine No.: 2261149 Number of spindles: 4 Spindle arrangement: bottom – right – left – top Nljdpfx Aevwfptjh Uob Motor power: 4 / 5.5 / 5.5 kW Planing width approx. 220 mm Planing height approx. 120 mm Spindle diameter: 40 mm Table length approx. 2000 mm Cutter system: indexable insert cutterheads Pre-feed cutter Cardan feed Protective hood Table lubrication: lubricating pump Infeed in front of the jointer Feed speed: stepless, 5–22 m/min, 2.2 kW Profiling One driven pressure roller Electric adjustment of thicknessing shaft Digital displays Extraction connections: 120 / 120 / 120 / 140 mm Required space approx. 3300 mm x 1750 mm Weight approx. 1300 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-is condition, as inspected, without warranty or guarantee

Būklė: naudotas, Number of spindles: 5 pcs. Working width: 20 - 230 mm Planing height: 8 - 120 mm Length of jointer table: 2000 mm Feed motor: 1.1 kW Feed speed steplessly adjustable: 2 - 12 m/min 1 WEINIG Planing and Moulding Machine VARIOMAT incl. multifunction/slotting table ----- Machine will be cleaned and functionally tested before delivery Technical Manufacturer's Description: ----- Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle horizontal bottom ----- Motor with brake: 5.5 kW Diameter: 40 mm Speed: 6000 rpm Tool circle: 125 - 145 mm Axial adjustment: 5 mm Rabbetting device incl. rebate cutter MarathonCoating for table insert before and after 1st bottom spindle 2nd spindle vertical right ----- Motor with brake: 11 kW Shared motor with left vertical spindle Diameter: 40 mm Speed electronically adjustable: 3000 - 6000 rpm (for 11 kW/15 HP) Tool circle for longitudinal machining: 93-232 mm Minimum tool diameter at fence level: 93 mm Maximum tool diameter behind fence level: 180 mm Maximum profile depth: 45 mm Axial adjustment: 30 mm Insert segment incl. additional fence lip 125 mm Insert segment incl. additional fence lip 150 mm 3rd spindle vertical left POWERLOCK/HSK ----- Shared motor with 1st right spindle PowerLock tool holding system Shared speed with right vertical spindle Tool circle for longitudinal machining: 93-232 mm Maximum profile depth: 45 mm Minimum profile depth with tool circle 200 mm: 20 mm Axial adjustment under table: 30 mm Insert segment 125 mm Insert segment 150 mm Nledpfx Ajwugpbeh Uob 4th spindle horizontal top ----- Motor with brake: 5.5 kW Diameter: 40 mm Speed: 6000 rpm Tool circle: 125-200 mm Maximum profile depth: 30 mm Minimum profile depth with tool circle 200 mm: 20 mm Axial adjustment: 30 mm Glazing bead discharge after top spindle 5th spindle second horizontal bottom ----- Motor with brake: 4 kW Diameter: 40 mm Speed: 6000 rpm Tool circle: 125-200 mm Maximum profile depth: 15 mm Axial adjustment: 10 mm Machine operation ----- Both axes of all spindles—except the 1st lower spindle—are equipped with mechanical digital readouts. Central radial adjustment with mechanical digital readout of feed, together with pressure ahead of the top spindle. Pressure after the top spindle adjustable separately. Memory function ----- For storing the setting values of profiles Tool holding axes and pressure elements before and after the top tool holder with electronic dual displays: Function: - Saves the setting values of the machined profile at the touch of a button under a profile number - Upon reselecting the profile number, the electronic dual displays indicate the setting values - By manually adjusting the tool holders and pressure elements, the displays are aligned - 99 memory slots 3 axially CNC-controlled adjustment and positioning of the spindles in combination with memory function. For spindles no. 2, 3, 4 3 radially CNC-controlled adjustment and posit...

Būklė: naujas, Velenų skaičius: 6 vnt. Nlodpfxevnv Ubj Ah Uob Darbinis plotis: 250 mm Obliavimo aukštis: 150 mm Lyginimo stalo ilgis: 2500 mm Padavimo variklis: 4 kW Padavimo greitis: 6–24 m/min. Svoris: 4770 kg Matmenys (Ilgis/Plotis/Aukštis): 4722x1860x1776 mm Keturių pusių obliavimo staklės Kuper SWT XL-6, langų versija su elektroniniu ašių bei radialiniu velenų reguliavimu. Tvirta, nedeformuojama ir žemo vibracijos lygio staklių bazė. Velenų skaičius: 6 Darbinis plotis: 250 mm Darbinis aukštis: 150 mm Lyginimo stalo ilgis: 2500 mm Veleno apsukos: dažnio valdomos 4000–8000 aps./min. Padavimo greitis: 6–24 m/min Išsamesnį aprašymą rasite pridėtame PDF faile! (Techniniai duomenys pagal gamintoją – be garantijos!)

Būklė: naudotas, Velenų skaičius: 8 vnt. Darbo plotis: 230 mm Obliavimo aukštis: 120 mm Weinig obliavimo linija ----- Sudaryta iš šių atskirų mašinų: Poz. 1: Weinig Profimat 23 E, keturpusė obliavimo staklės, sandėlio nr. 2803 5 velenai + stiklo briaunų pjūklas Poz. 2: Weinig Uniplan 23, sandėlio nr. 2804 Baigiamojo ir hidroobliavimo staklės su 2 horizontaliais velenais Poz. 3: Weinig RF 15, sandėlio nr. 2805 Išilginis-skersinis-išilginis konvejeris su ruošinio grąžinimu operatoriui Išsamūs mašinų aprašymai pateikiami nurodytais sandėlio numeriais. Nedpfx Ahexpn Tuj Uslb (Techninė informacija pagal gamintoją, be garantijos!)

Būklė: naudotas, Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min Weinig Powermat 400 with HSK/Powerlock, CNC controlled axial/radial adjustment ----- Machine is overhauled and function-tested! Summary: ----- 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of spindles via control system CNC-controlled feed adjustment and positioning Detailed description: ----- Technical data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 1. Tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle: 93 - 160 mm Axial adjustment range: 5 mm Rabbetting device MarathonCoating on table insert in front of 1st lower tool holder 2. Tool holder - PowerLock - right ----- Motor with brake: 11.0 kW Shared motor with left tool holder Speed including high-performance bearings: 8,000 rpm Tool cutting circle 40 mm below table level: 93 - 200 mm Tool cutting circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight knife heads max. 163 mm Max. tool diameter behind fence line: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Spindle CNC-controlled, axial and radial 3. Tool holder - PowerLock - left ----- Nlsdjuzaa Sopfx Ah Ujb Motor with brake: Shared motor with 2nd spindle Speed including high-performance bearings: 8,000 rpm Tool cutting circle 40 mm below table level: 93 - 200 mm Tool cutting circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight knife heads max. 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Spindle CNC-controlled, axial and radial 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed including high-performance bearings: 8,000 rpm Tool cutting circle: 93 - 200 mm Tool cutting circle for straight knife heads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Split pressure shoe in front of upper tool, adjustable to tool cutting circle and can be swung away from the tool, spring-loaded. Spindle CNC-controlled, radial 5. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed including high-performance bearings: 8,000 rpm Tool cutting circle: 93 - 200 mm Tool cutting circle for straight knife heads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Split pressure shoe in front of upper tool, adjustable to tool cutting circle and can be swung away from the tool, spring-loaded. Spindle CNC-controlled, axial and radial 6. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed including high-performance bearings: 8,000 rpm Tool cutting circle: 93 - 200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Spindle CNC-controlled, radial Feed system ----- Frequency-controlled feed, infinitely adjustable with brake: 4 kW, 5 - 30 m/min

Būklė: naudotas, Gamybos metai: 2021, Number of spindles: 5 pcs Working width: 250 mm Planing height: 160 mm Planer table length: 2500 mm Feed motor: 4 kW Feed speed: 6–24 m/min Control: K2 Basic 7" Touch KUPER SWT XL-5 AUTOMATIC PLANING AND MOULDING MACHINE ----- LIKE NEW, DEMONSTRATION MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 – 6,000 rpm, spindle 4,500 – 8,000 rpm - Width and height motorized positioning: left spindle radial top spindle axial - Feed beam motorized positioning - Further motorized positioning: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125–163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (with tool diameter up to 163 mm): 10 – 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm The machining of the workpieces depends on the following operating parameters: Material, wood moisture, tools, chip removal diameter, Nledpfewgwmnsx Ah Ueb and feed speed. Adjustments to the operating parameters may be necessary. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with frequency inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 125–160 mm Rabbet cutter: diameter difference 20–25 mm to the planing head Important: Machine cannot be operated without a jointer rabbet cutter Suction port D = 125 mm Tool clamping system: Quick-clamping nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with frequency inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Suction port D = 125 mm Extraction: individually adjustable chip deflector plate Tool clamping system: Quick-clamping nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with frequency inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Suction port D = 125 mm Extraction: individually adjustable chip deflector plate Tool clamping system: Quick-clamping nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with frequency inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 112–200 mm Pressure shoe: pneumatically and dynamically adjustable via linear guides Standard profile depth: 20 mm Suction port D = 125 mm Extraction: individually adjustable chip deflector plate Tool clamping system: Quick-clamping nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with f...

Būklė: naudotas, Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min Total connected load: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight: approx. 2500 kg Weinig Four-side Planer Profimat 23 Window Version with glazing bead cutting or usable as grooving spindle ATS control and program management ----- Machine factory-refurbished in 2024 by Weinig. Technical Data - Summary (possibly including additional accessories – please inquire) ----- Nodpfsxpn T Ujx Ah Uelb General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total connected load: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle Arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically controlled up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatically controlled up/down Spindle Specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw, 2.2 kW, 6000 rpm, 40 mm diameter Further Features ----- > Glazing bead cutting or usable as a grooving unit > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package Combined control of right spindle and glazing bead discharge via manual selector switch at operator panel > Spindles with mechanical digital readout (Technical data according to manufacturer specification – no liability assumed!)

Būklė: naudotas, Gamybos metai: 2017, Number of spindles: 5 units Working width: 240 mm Planing height: 120 mm Surfacing table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Weight approx.: 3,500 kg Control: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully inspected. Summary: ----- - 5 spindles - Powerful motors - Left and top spindles controlled for width and height - With return system for workpieces to the operator 1st spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system 3rd spindle ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic horizontal positioning / motorised width adjustment 4th spindle ----- First top horizontal spindle Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic radial positioning / motorised height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Nsdpfjwwl Nlsx Ah Uelb Including workpiece return system Including used planing heads currently installed. (Technical specifications according to manufacturer – subject to verification!)

Būklė: naudotas, Gamybos metai: 2021, Number of spindles: 5 pcs Working width: 230 mm Planing height: 160 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min Control: K2 Basic 7" touch panel KUPER SWT XL-5 AUTOMATIC PLANING AND MOULDING MACHINE ----- LIKE NEW, DEMONSTRATION MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 – 6,000 rpm - Width and height positioned by motor: Left spindle radial Top spindle axial - Feed beam positioned by motor DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125-163 mm): 15 - 230 mm Working height (with tool diameter 125 mm): 10 - 160 mm (with tool diameter up to 163 mm): 10 - 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Processing of workpieces depends on the following operating parameters: Material, wood moisture, tooling, chip removal diameter, and feed speed. Adjustment to operating parameters may be required. SPINDLE CONFIGURATION ----- Bottom, right, left, top, bottom 1st Spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with frequency inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 125–160 mm Rabbet device: diameter difference 20–25 mm to the planer head Important: Machine cannot be operated without jointing cutter Extraction port D = 125 mm Tool clamping system: Quick-clamp "Pro-Lock" 2nd Spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with frequency inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4000 - 6000 rpm Tool diameter: 112 - 200 mm Axial adjustment range: 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction port D = 125 mm Extraction: individually adjustable chip deflector plate Tool clamping system: Quick-clamp "Pro-Lock" 3rd Spindle: VERTICAL, LEFT ----- Siemens IE3 motor with frequency inverter brake, 7.5 kW (10 HP) Nlsdpfx Aewgwmhsh Usb Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4000 - 6000 rpm Tool diameter: 112 - 200 mm Axial adjustment range: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction port D = 125 mm Extraction: individually adjustable chip deflector plate Tool clamping system: Quick-clamp "Pro-Lock" 4th Spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with frequency inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4000 - 6000 rpm Tool diameter: 112 - 200 mm Pressure shoe: pneumatically, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction port D = 125 mm Extraction: individually adjustable chip deflector plate Tool clamping system: Quick-clamp "Pro-Lock" 5th Spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with frequency inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled...

Būklė: naudotas, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5–24 m/min Total power requirement: 27 kW Dimensions (L x W x H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig Four-Side Planer Profimat 23 Window Version with glazing bead cutting unit, alternatively usable as a grooving spindle ATS control and program control ----- Machine is currently being overhauled and function-tested Technical Data Summary (additional accessories, if included, upon request) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle Arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically controlled up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatically controlled up/down Nodpfxou Su Hus Ah Uolb Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Glazing bead cutting or usable as a grooving unit > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package Combined control of right spindle and glazing bead discharge via manual selector switch on the control panel > Spindles with mechanical digital display Option: Used planer heads available (technical data as per manufacturer – no guarantee!)

Būklė: naudotas, Number of spindles: 6 units Njdpevnwbcsfx Ah Uelb Working width: 230 mm Planing height: 160 mm Surface table length: 1050 mm Feed motor: 7 kW Feed speed: 6–40 m/min Weinig Powermat 1200 ----- With infeed automation: Weinig wheel magazine EM 100 and linked with outfeed automation: Weinig High-Mech A 1 The machine will be completely refurbished at our warehouse prior to delivery! Detailed Description: ----- 1. Weinig Planer and Moulder Powermat 1200 ----- Technical Data: ----- Working width: 20–230 mm (with tool cutting circle 93–163 mm) Working height: 10–160 mm (with tool cutting circle 93–163 mm) 1st Spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool cutting circle: 125–180 mm With PowerLock: 93–180 mm Tool cutting circle for rebate cutter: 130–160 mm Axial adjustment: 17 mm Rebate device MarathonCoating before 1st lower tool holder 2nd Spindle ----- First right vertical spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool cutting circle: 93–200 mm Maximum profiling depth: 35 mm Axial adjustment: 80 mm Radial adjustment Minimum tool diameter at fence level: 93 mm Maximum tool diameter behind fence level: 200 mm 3rd Spindle ----- First left vertical spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool cutting circle: 93–200 mm Tool circle for straight knife heads max. 163 mm Maximum profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the left tool holder, incl. 2 side-mounted, spring-loaded pressure rollers 4th Spindle ----- First upper horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool cutting circle: 93–200 mm Tool circle for straight knife heads max. 163 mm Maximum profiling depth: 35 mm Axial adjustment: 40 mm Split pressure shoe in front of the upper tool holder, adjustable for tool cutting circle and pivotable away from the tool, spring-loaded. Upper spindle prepared for subsequent cassette system installation 5th Spindle ----- Second upper horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool cutting circle: 93–200 mm Tool circle for straight knife heads max. 163 mm Maximum profiling depth: 35 mm Axial adjustment: 40 mm Split pressure shoe in front of the upper tool holder, adjustable for tool cutting circle and pivotable away from the tool, spring-loaded. Upper spindle prepared for subsequent cassette system installation 6th Spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool cutting circle: 93–225 mm Maximum profiling depth: 15 mm Axial adjustment: 40 mm Radial adjustment Minimum tool diameter at table level: 93 mm Maximum tool diameter 6 mm below table level: 225 mm All spindles designed for high concentricity. Lubrication points for axial tool holder adjustment. Feed system ----- Electronic feed, infinitely variable with brake 6–40 m/min, motor 7 kW

Būklė: geras (naudotas), Automatinis oblius 230/120 mm, profiliuojantis, 2006 m. Nlsdpfoxn Uptox Ah Ujb

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, mašinos/transporto priemonės numeris: 2166, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 230 mm, ašies skersmuo: 40 mm, veleno greitis (maks.): 6 200 aps./min, darbinio aukščio: 125 mm, TECHNICAL DETAILS Minimum working height: 8 mm Maximum working height: 125 mm Minimum working width: 18 mm Maximum working width: 230 mm Minimum feed speed: 6 m/min Maximum feed speed: 28 m/min Spindle speed: 6,200 rpm Spindle diameter: 40 mm MACHINE DETAILS Electrical Data Nlodpfx Ahjwyviuj Usb Main fuse: 80 A Machine voltage: 400 V, 3PH, 50Hz Motors Bottom spindle: 5.5 - 7.5 kW Right spindle: 5.5 - 7.5 kW Left spindle: 7.5 - 10 kW Top spindle: 7.5 - 10 kW Dimensions & Weight Dimensions (L x W x H): 4,400 x 2,000 x 1,850 mm Weight: 4,000 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2014, mašinos/transporto priemonės numeris: 119676, Funkcionalumas: visiškai funkcionalus, sukimosi greitis (maks.): 6 000 aps./min, darbinis plotis: 230 mm, ašies skersmuo: 40 mm, darbinio aukščio: 120 mm, TECHNICAL DETAILS Working height: 8–120 mm Working width: 20–230 mm Feed speed: 5–30 m/min Spindle speed: 6,000 rpm Spindle diameter: 40 mm MACHINE DETAILS Net weight: 2,500 kg Dimensions (L x W x H): 3,620 x 2,140 x 1,650 mm Total power: 41 kW Year of manufacture: 2014 Serial number: 119676 CE marking available: Yes Equipment Spindle – bottom horizontal Spindle – right vertical Spindle – left vertical Njdpfxjwtddto Ah Uslb Spindle – top horizontal Spindle – bottom horizontal Documentation available: No Transport dimensions: 3,620 mm x 2,140 mm x 1,650 mm Transport weight: 2,500 kg No. of transport packages: 1 Additional options: Vibration monitoring Machine lamp Speed detection Operating hours counter Table lubrication

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, X ašies padavimo greitis: 24 m/min, darbinis plotis: 230 mm, darbinio aukščio: 120 mm, veleno greitis (maks.): 6 800 aps./min, stalo ilgis: 2 500 mm, TECHNINĖS DETALĖS Darbo plotis: 20-230 mm Darbo aukštis: 8-120 mm Veleno apsisukimų dažnis: 6.800 aps./min Nedpfsw R T Uzox Ah Uelb Padavimo greitis: 5-24 m/min Stalo ilgis: 2.500 mm STAKLIŲ DETALĖS Veleno prijungimo galia: 11 kW Velenų skaičius: 6 ĮRANGA ATS sistema su automatiniu 2 ašių padėties nustatymu 3 ir 4 velenui Mechaninis stabdis visiems varikliams Universalus velenas, tinkamas naudoti 360° kampu Pastaba: U velenas neįtrauktas. Naujo kaina apie 5000 €.

Būklė: labai geros būklės (naudotas), Four-sided planer WEINIG HYDROMAT 22 AL - Max. working width: 220 mm - Max. working height: 130 mm - 8 spindles: 1) Bottom horizontal 220 mm 5.5 kW 2) Right vertical 130 mm 7.5 kW 3) Left vertical 130 mm 7.5 kW 4) Right vertical 130 mm 5.5 kW 5) Top horizontal 220 mm 11 kW – 5th spindle electrically adjustable up/down 6) Bottom horizontal 220 mm 5.5 kW 7) Bottom horizontal 220 mm 5.5 kW – 7th spindle with steady rest + Jointer system (cutterhead sharpening) 8) Universal 220 mm, 360° adjustable 7.5 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm From above: - 6 feed rollers, double-toothed + 1 single - 3 outfeed rollers, rubber-coated, double smooth + 3 single Nodpfx Ahoy Ux Dqs Uolb - Meter counter From below: - 1 infeed roller, toothed, driven, swiveling in the lower table - 3 metal feed rollers, smooth - Feed on cardan shafts - Pneumatically loaded rollers - Infinitely variable feed speed + 2 gears, 10–60 m/min - Feed motor: 10 kW - Electric thickness adjustment - Body elevation motor: 0.75 kW - Central table lubrication - Extraction ports: 5 x 140 mm, 3 x 120 mm - Machine dimensions (LxWxH): 4680 x 1780 x 1850 mm - Control cabinet dimensions (on pallet): 1020 x 1000 x 2230 mm - Weight: approx. 5,000 kg Feeder with centering device: - Roller width: 450 mm - 1 toothed feed roller on infeed - 22 smooth feed rollers - Top pressure adjustable - Feeder length: 9,020 mm - Infinitely variable speed regulation: 10–60 m/min - Motor: 0.75 kW - Dimensions (LxWxH): 9,020 x 790 x 1,150 mm Net price: 179,900 PLN Net price: 42,850 EUR (based on an exchange rate of 4.2 EUR/PLN). (Prices may vary with larger rate fluctuations)

Būklė: labai geros būklės (naudotas), CATALOG NUMBER 7679 TECHNICAL DATA - Maximum planing width: 610 mm - Maximum double-sided planing height: 200 mm - Electric table height adjustment (up/down) - Maximum four-sided planing height: 100 mm Nledey T Rhxopfx Ah Ujb – Top section: - Feed-in roller, toothed - Kickback prevention devices - Pressure bar - 2 toothed feed rollers - Pressure bar - Planing shaft 610 mm, 4-knives, 7.5 kW - Pressure bar - Smooth outfeed roller – Bottom section: - Guide bar - Toothed feed roller - Planing shaft 610 mm, 4-knives, 5.5 kW - 2 smooth feed rollers – Rear: - 2 side spindles + pressure bar 1) Right vertical, 100 mm, 4 kW 2) Left vertical, 100 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable (up/down, right/left) - Manual planing width adjustment - 6 feed speeds: 7/9/11.5/14/18/23 m/min - Feed motor: 3.1 kW - Dimensions (LxWxH): 2500x1800x600 mm - Weight: approx. 3000 kg ADVANTAGES – Ideal for processing beams, floorboards, etc. – Manufactured by the German brand KUPFERMUHLE – 2 horizontal planing shafts + 2 vertical spindles – Used planer, condition very good Net price: 56,900 PLN Net price: 13,550 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with exchange rate fluctuations)