Keturios šoninės obliavimo staklės

CASOLIN Mega 230/6

Būklė: naudotas, Gamybos metai: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CETRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned one above the other. The right saw unit is fixed; the left unit can be adjusted. The preset cutting length can be read on a digital measuring display. Both units feature supports that enable the simultaneous cutting of 2 glazing beads. To cut larger cross-sections, the upper support can be removed. Upon completion of the cutting process, the pneumatic clamping cylinders automatically swing aside to facilitate the loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital measuring display • Pressure switch • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool kit • Safety guards with horizontal, swiveling clamping devices • Two-hand operation • Belt drive • Pneumatic unit stroke • Central support TECHNICAL DATA • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optional 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Space requirement (standard equipment): 3000 x 850 mm EXTENDED CUTTING CAPACITY 1 pc Maximum cutting length: 4000 mm Star stop with 4 positions 1 pc Set of 2 mechanical stops for adjusting up to 4 intermediate angles Fedpfxoxnlgcs Af Asgb Additional central support 1 pc Adaptations for rebated profiles 1 pc Adaptations for rebated profiles as per drawing: - Attachment on the clamping devices to compensate for the profile inclination - Spacers on the rear stops of the units and the central support In the sketch below (in green), a beveled pusher is shown, which follows the inclined profile and presses it against the (red) spacer on the stop. Location: Garbsen

Gamybos metai: 1988, būklė: reikia remonto (naudotas), Mechanizavimas įvedimui prieš obliavimo stakles, tinkama KVH/BSH ir pan. Rekomenduojama ruošiniams iki maždaug 13 m ilgio. Ideali KVH ir BSH linija prieš obliavimo stakles. Išilginis iškrovimas – gaminių atskyrimas. 4 vnt. šoniniu būdu reguliuojamų diskinio pjūklo atpjovimo įrenginių. Pjūvio matmenys: 180 x 220 mm, 150 x 300 mm. Užtenka vieno operatoriaus. Fgsdevbtpjpfx Af Asb

Gamybos metai: 2004, būklė: labai geros būklės (naudotas), Four-side planer - Maximum planing width: 23 cm - Maximum planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 overhead transfer rollers in front of the bottom head, plus a roller device for short elements - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left spindles, and a Tersa knife head on the top spindle. Fedpfx Afjhlp D Ns Aogb

Būklė: labai geros būklės (naudotas), SCM Flex 1 Tenoning and Milling Machine Fedpowtf Adefx Af Aegb Spindle diameter: 40 mm Total spindle height: 200 mm Double-speed motor: 6.6/8 kW Variable speed by belt: 3250/6500 and 5000/10000 rpm Electric spindle lifting Maximum cutter diameter: 270 mm Scoring saw unit: 2.2 kW Automatic side carriage Pneumatic material clamps Four-roller feed unit

Gamybos metai: 1999, būklė: paruoštas naudoti (naudotas), Darbinis plotis: 230 mm, darbinis aukštis: 160 mm, velenų skaičius: 5, veleno diametras: 50 mm, veleno galia: 4x 5,5 kW / 2x 11 kW, padavimas: 24 m/min, padavimo stalo ilgis: 3000 mm, vertikalaus veleno ašinė eiga: 80 mm, horizontalaus veleno ašinė eiga: 45 mm. Bendras pajungimo galingumas: 126 kW, oro poreikis: 8400–9600 m³/val., staklių matmenys (X/Y/Z): apie 3500 mm / 2000 mm / 1800 mm, svoris: apie 3500 kg. Į komplektą įeina Weinig EM-11 įstūmimo įrenginys ir tinkamas ištraukimo paskirstytuvas. Dokumentacija yra. Galima apžiūrėti vietoje. Fgodpfx Afou Damde Asb

Būklė: naudotas, No. 3176 WEINIG Hydromat 1000 Planer and Moulder Used, Year of manufacture: 2007 6 spindles: bottom – right – left – top – top – bottom Electronic feed: 6 – 60 m/min Working width: 80 – 150 mm Working height: 23 – 65 mm Finished lamella width: 4 – 15 mm Max. number of lamellas: 16 pcs Lamella length: 400 – 4000 mm 1st spindle, horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter: 45 mm Tool diameter: 125 – 180 mm 2nd spindle, vertical right Brake motor 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Fsdpsu Agh Sefx Af Asgb 3rd spindle, vertical left 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the spindle, swivelling, pneumatically loaded roller 4th spindle, horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 5th spindle, horizontal top as saw spindle Brake motor 37 kW, 5000 rpm Diameter: 45 mm Reduced axial adjustment to 25 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 6th spindle, horizontal bottom as saw spindle Brake motor 30 kW, 5000 rpm Reduced axial adjustment to 25 mm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm All moulder spindles equipped with high-performance bearings Electronic feed, 7.5 kW Feed rollers adjustable axially by 35 mm relative to the left spindle Reduced roller spacing opposite the right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, serrated roller in the table, side pressure roller Automatic Waxilit pump / Lubrication pump Machine with 4-roller outfeed, extended universal joint shafts to 200 mm 2 driven, serrated rollers in the outfeed table 2 driven, serrated rollers in the machine table Pressure beam before and material removal after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electrically adjustable height for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Errors in description and price are excepted Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; applies: 'purchased as inspected' Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Gamybos metai: 1998, būklė: labai geros būklės (naudotas), I am selling the following window manufacturing set: - 1 unit Mortise and Tenon Machine Weinig Unitec 10. - 1 unit Profile Shaping Center Weinig Univar 10. Fjdpfx Aefzzhyof Ajgb Year of manufacture: 1998. Milling heads from OERTLI. Available immediately. Price for the complete set: €17,000. Condition: very good!

Būklė: naudotas, Gamybos metai: 2007, Suitable for the automatic machining of PCD-tipped milling cutters, shank tools, and disc-shaped tools such as saws, milling cutters, etc., using the wire electrical discharge machining (EDM) process. Accessories: - Full enclosure - Cooling unit for dielectric fluid - Automatic fire extinguishing system Fodpfx Aewtmg Dof Asgb - N181 extraction unit - Probing system - Machine lamp - Automatic central lubrication - Workpiece holder ISO50 - Measuring arbor Maximum milling cutter outer diameter: 250 mm Maximum cutting length: 260 mm Shank tool diameter: 10 - 250 mm Maximum outer diameter of disc-shaped tools: 250 mm Maximum tool weight: 20 kg X-axis travel: 275 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis spindle taper: ISO 50 E-axis swivel range: 180° Machine footprint: 2535 x 2200 x 2220 mm Approx. weight: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) Colour: grey RAL 7045/7047

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, Smulkintuvas SG - 500/200 - Smulkintuvas pilnai restauruotas ir paruoštas eksploatacijai Fgjdpfx Afowhw Iuo Aeb - Prie smulkintuvo yra 8 m ilgio vibruojanti transportavimo juosta su atskyrimu, kur atskiriamos pjuvenos, įrengta magnetu su metalo detekcija Prieduose rasite išsamius techninius duomenis apie įrenginį - elektros valdymo skydas prie įrenginio.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weinig Powermat 500 Four-Sided Planer Working width: 230 mm Working height: 160 mm Number of spindles: 6 Fgedjvfr Rgjpfx Af Ajb Spindle configuration: - Bottom: 5.5 kW, 8000 rpm - Right: 5.5 kW, 8000 rpm - Left: 7.5 kW, 8000 rpm - Top: 7.5 kW, 8000 rpm - Bottom: 7.5 kW, 8000 rpm - Universal: 5.5 kW, 8000 rpm Spindle No. 6 equipped with PowerLock system Feed speed adjustable by inverter up to 30 m/min Feed rollers embedded in the working table (1 grooved roller for wet timber) Electromechanical adjustment of working height and width Pneumatic material hold-downs Drive via cardan shafts Total power: 41 kW Year of manufacture: 2005 CE certificate