Brandt Ciklo Režimu Veikianti Postformingo Mašina pirkti naudotą (43 560)

Gamybos metai: 1988, būklė: naudotas, • Maximum working length (mm): 3100 Dkjdpfxokx Hpas Ag Iet • Maximum profile height (mm): 200

Būklė: naudotas, „Trittico Executive 305“ serija Gamybos metai: 2011 Talpa vienam ciklui: 5 l Programos: ledams, šerbetams, kremams, ganašui, šokoladui, putoms, beze, bešamelio padažui gaminti Serijos numeris: 3230338 Energijos šaltinis: elektra Įtampa: 400 V, trifazė Dažnis: 50 Hz Galia: 5,80 kW Maišytuvo maksimali galia: 1,90 kW Šildymo elementas: 4,55 kW Šaltnešis: R404 Šaltnešio kiekis: 1,15 kg Kondensacija: vandeniu Minimalus vandens slėgis: 200 kPa Maksimalus vandens slėgis: 300 kPa Matmenys: 500 x 650 x 1300 mm Dodozyb U Hepfx Ag Iokt

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 760 mm, plotas našumas: 4 000 m²/val, garantijos trukmė: 24 mėnesiai, bakelio talpa: 120 l, bendras aukštis: 1 258 mm, bendras plotis: 834 mm, bendras ilgis: 1 458 mm, vandens talpos tūris: 130 l, darbinis greitis: 8 mm/s, We offer for sale a brand new IXSA X9 Ride-On Scrubber Dryer. Warranty coverage: - Machine: 24 months - Batteries: 60 months Technical specifications: • Working width: 760 mm • Productivity: 4,000 m²/h • Brush diameter (number): 380 mm (2) • Squeegee width: 1,020 mm • Waste water tank: 130 l • Solution tank: 120 l • Rated power: 2,100 W • Max. incline: 10 % • Vacuum motor output: 24 V / 550 W • Brush motor output: 24 V / 2x550 W • Maximum speed: 8 km/h • Brush pressure: 3.5 Mpa • Brush speed: 180 rpm • Pad width: 13 inches Dkodpfx Aoyaafleg Iet • Suction: 188 mbar • Noise level (EN 60704): 65 dB(A) • Dimensions (LxWxH): 1458 x 834 x 1258 mm • Weight (without battery): 248 kg • Lifepo4 batteries: 25.6V 200Ah, run time approx. 5 h • Lifepo4 batteries: 25.6V 300Ah, run time approx. 7 h • Batteries can be opportunity charged Standard equipment included with the scrubbers offered: • Neodymium disc brushes—magnetic mounting • Pad holder • LifePro batteries with extended cycle life and longer run time compared to standard gel batteries • Charger • Linatex suction bar blades Why choose IXSA? ✅ Durability – minimal electronics inside the machine increase long-term reliability ✅ 5-year warranty on lithium-ion batteries – unmatched in the industry, providing top-level durability and reliability ✅ Significantly higher charge/discharge cycles than gel batteries (5,000 vs. 700 cycles) and longer runtimes—IXSA batteries ensure more efficient operation and lower replacement costs over time ✅ Magnet-mounted brushes – simple installation and removal ✅ Long operating time per charge, with quick recharge capability ✅ Highest quality American-made LINATEX squeegee blades ✅ Twin suction system – perfectly dry floors immediately after cleaning ✅ Neodymium brushes – advanced technology for improved cleaning results and extended service life ✅ High surface performance – saves time and reduces labor costs ✅ Robust construction, low running costs – designed for heavy-duty, professional use ✅ Ergonomic and intuitive controls – user-friendly and easy to operate

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 650 mm, plotas našumas: 3 300 m²/val, garantijos trukmė: 24 mėnesiai, bakelio talpa: 85 l, bendras aukštis: 1 170 mm, bendras plotis: 660 mm, bendras ilgis: 1 300 mm, vandens talpos tūris: 95 l, tuščias svoris: 229 kg, We offer for sale a brand new Ride-on Scrubber-Dryer Machine IXSA Model X8 with seat. Device warranty: 24 months Battery warranty: 60 months Technical specifications: • Working width (mm): 650 • Machine productivity (m²/h): 3300 • Brush diameter (quantity) (mm): 330 (2) • Squeegee width (mm): 1020 • Dirty water tank (l): 95 • Detergent tank (l): 85 • Rated power (W): 1350 • Maximum incline (%): 10 • Suction motor power (V/W): 24/500 Dsdpex U T E Nofx Ag Iokt • Brush motor power (V/W): 24/2*300 • Maximum speed (km/h): 8 • Brush pressure (Mpa): 2.8 • Brush rotation speed (rpm): 180 • Pad width (inch): 13 • Vacuum (mbar): 188 • Noise level (EN 60704) (db(A)): 63 • Machine dimensions (L/W/H): 1300*660*1170 mm • Machine weight (without batteries) (kg): 229 • Lifepo4 batteries: 24V 200Ah, Working time: approx. 7 h • Battery charging possible during use Standard equipment provided with the scrubber-dryer listed includes: • Neodymium disc brushes – magnet-mounted • Pad driver plate • LifePro batteries with extended cycle count and longer operating time compared to standard gel batteries • Charger • Squeegee blades made from LINATEX material Why choose IXSA? ✅ Durability – minimal electronics ensure maximum reliability and longevity ✅ 5-year warranty on lithium-ion batteries – unique in the industry, a testament to the highest durability and reliability ✅ Higher charging cycle count versus gel batteries (700 vs 5000 cycles) and longer operating time – IXSA batteries allow more efficient operation and reduced long-term replacement costs ✅ Magnet-mounted brush – for easy installation and removal ✅ Long working time with short charging duration ✅ Top-quality American LINATEX squeegee blades ✅ Dual suction system – leaves the floor perfectly dry immediately after cleaning ✅ Neodymium brushes – advanced technology for enhanced cleaning performance and extended brush life ✅ High surface efficiency – saves time and operating costs ✅ Robust construction, low operating costs – equipment built for intensive, professional use ✅ Ergonomics and intuitive operation – comfortable usage and easy control

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 530 mm, plotas našumas: 3 000 m²/val, garantijos trukmė: 24 mėnesiai, bakelio talpa: 60 l, bendras aukštis: 1 090 mm, bendras plotis: 550 mm, bendras ilgis: 1 270 mm, vandens talpos tūris: 65 l, tuščias svoris: 154 kg, We offer for sale a New Scrubber-Dryer Machine with traction – IXSA Model X7T Device warranty – 24 months Battery warranty – 60 months Technical specifications: • Scrubbing width: 530 mm (20 inches) • Squeegee width: 790 mm • Dimensions: L1270 × W550 × H1090 mm • Solution/dirty water tank: 60/65 L • Vacuum motor: 370 W • Brush motor: 500 W • Productivity: 3000 m²/h • Net weight: 154 kg • Working speed: 0–5 km/h • Semi-automatic drive • Battery charging time: approx. 4h (2h to 80%) • Battery runtime: approx. 4h • Battery lifespan: 5000 cycles • Possibility to recharge the battery Standard equipment for scrubber machines included in the offer: • Neodymium disc brushes – magnetic mounting • Pad driver • LifePro batteries with extended cycle life and longer operation compared to standard Gel batteries • Charger • Squeegee blades made from Linatex material Why choose IXSA? ✅ Durability – electronics are reduced to a minimum, resulting in higher reliability and longevity ✅ 5-year lithium-ion battery warranty – unique in the industry, confirming top durability and reliability Dedpfxox U Ty Hs Ag Ijkt ✅ Increased charging cycles compared to gel batteries (700 vs. 5000 cycles) and longer operating times – IXSA batteries enable more efficient use and lower replacement costs in the long term ✅ Magnet-mounted brush – easy assembly and disassembly ✅ Long operating time on the included battery with short charging times ✅ Highest-quality American LINATEX squeegee blades ✅ Double suction system – floors are perfectly dry immediately after cleaning ✅ Neodymium brushes – advanced technology ensures better results and longer lifetime ✅ High surface productivity – saving time and labor costs ✅ Robust construction, low operating costs – equipment designed for intensive, professional use ✅ Ergonomics and intuitive controls – operator comfort and simple control

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Basic information: Year of manufacture: 2005 Dimensions (LxWxH): 7580x4360x5120 mm Weight: 6000 kg Djdpfx Agjrfn Rvj Iokt Operating voltage: 400/415V 50Hz Power consumption: 20 kW Output at 20g/l: 1600 kg/h TOUCH SCREEN control panel Feed hopper with screw conveyor Complete documentation available in both paper and electronic form (electrical diagrams, CE conformity certificate, user manual) Condition: Very good (machine is clean and well-maintained, used exclusively for expanding white polystyrene) For an additional fee, we can arrange transport, installation, and commissioning of the machine by our technicians at the location specified by the customer.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 12 000 mm, Y ašies eiga: 4 050 mm, Z ašies eigos atstumas: 1 600 mm, veleno greitis (min.): 625 aps./min, ašies skersmuo: 200 mm, stalo apkrova: 100 000 kg, SCHIESS AR-601/142 – 2014 m. visiškai atnaujintas Pagrindiniai techniniai duomenys: Dkedpszy Hnxofx Ag Iet X ašis (stovo išilginis eigos diapazonas): 12 000 mm Y ašis (vertikalus eigos diapazonas): 4 050 mm Gręžimo veleno eigos diapazonas: 1 600 mm Frezavimo veleno eigos diapazonas: 900 mm Veleno skersmuo: 200 mm Veleno galia: 91 kW Veleno sūkių skaičius: 1,18–625 aps./min. Apdirbimo pajėgumas: Maks. gręžimo skersmuo: 1 600 mm Maks. apdirbimo skersmuo: 3 000 mm Krovumas: 120 tonų Sukamas stalas: Skersmuo: 3 000 mm Maks. apkrova: 100 tonų Pristatomi priedai: Atraminė įvorė Įtvirtinimo plokštės: 2 vnt. – 8 × 5 m 1 vnt. – 6 × 3 m Kampinės plokštės

Būklė: labai geros būklės (naudotas), MECOF AGILE CS 500 TNC 640 Boring Mill in Excellent Technical Condition Technical Specifications: – Spindle Mount: ISO 50 – Longitudinal Travel: 6000 mm – Cross Travel: 1250 mm – Vertical Travel: 1700 mm – Table Size: 7300×1090 mm + (2 CUBI 1520×1000 mm) – Spindle Speed: 4000 rpm – CNC Model: fidia CXR – Tool Changer Capacity: PICK-UP UTENSILI 10 POSITIONS (5x ISO 50 – 5x HSK 50 E) – Power: 30 kW spindle The MECOF AGILE CS 500 TNC 640 offers a wide range of features and technical specifications to meet diverse requirements. With a longitudinal travel of 6000 mm and a cross travel of 1250 mm, it enables precise drilling and milling of large workpieces. The vertical travel of 1700 mm ensures maximum flexibility, allowing for machining at various angles. The table size is 7300×1090 mm, supplemented by two additional cubes measuring 1520×1000 mm. In this configuration, the machine is installed at floor level. This boring mill is equipped with a powerful 30 kW spindle motor with a maximum speed of 4000 rpm. The fidia CXR CNC control guarantees precise programming and easy operation. The 10-position tool changer (5x ISO 50 – 5x HSK 50 E) provides fast tool changes to optimize the production process. The machine has been regularly maintained and is in excellent technical condition. It can be inspected under power during ongoing production. Extensive accessory package included. More photos available upon request. Dodpfjy Rzkljx Ag Iokt Dismantling, removal, shipping, and reinstallation can be organized.

Būklė: geras (naudotas), Gamybos metai: 1987, X ašies eiga: 11 500 mm, Y ašies eiga: 4 500 mm, Z ašies eigos atstumas: 2 000 mm, x eiga 11500 mm y eiga 4500 mm w ašis 1600 mm z ašis 2000 mm Veleno skersmuo 200 mm Sukamasis stalas 3000 x 4000 mm Lovo ilgis su sukamąja stalu 4600 mm Įrankio tvirtinimas SK50 Dedpfx Aezzdbleg Iokt Detalės svoris ant sukamojio stalo 80 t Bendras galios poreikis 83 kW Papildoma informacija: įskaitant 15 plokščių

Būklė: geras (naudotas), Gamybos metai: 1983, Veleno skersmuo: 200 mm Dedjzzdauepfx Ag Iokt Apdirbimo plotis: 6000 mm Apdirbimo aukštis: 3150 mm Maks. apdirbimo gylis: 1985 mm Slydimo skerspjūvis: 530 x 550 mm Stalo apkrova: 20 t Plokščių lauko dydis: 11200 x 5550 mm Įrankio laikiklis: SK 60 Mašinos svoris apie: 173 t Papildoma informacija: - Papildomi įrenginiai: didelė ir maža kampinė galva - OB-Nr.: 22979 - Stalo modelis: S20 MP, stalo dydis: 2200 x 2500 mm - Apdirbimo plotis per X ašį yra 6000 mm - Įskaitant 6 plokštes po 5600 mm x 1850 mm

Būklė: naudotas, Exhibition machine Condition: like new Scope of delivery: - Equipment case - Device - Operating manual - Bit Dsdpfx Ajzk Ntrsg Ijkt This item is an unused exhibition unit.

Būklė: naudotas, Naudota mašina Įranga ir techniniai duomenys: - dvipusė eilinė gręžimo mašina - 2 gręžimo varikliai po 1,8 kW, su alyvos stabdžio cilindru - eigos ilgis maks. 130 mm - su pneumatiniu perjungimo vožtuvu - 21 velenas, velenų žingsnis 32 mm - didžiausias gręžimo atstumas 640 mm (perkeliant ruošinį iki 2656 mm) - portalo praėjimo plotis 850 mm - oro sąnaudos prie 5 barų apie 11 l per ciklą - ištraukimo jungtis 160 mm Matmenys: apie 3100 x 1100 x 1800 mm Svoris: apie 350 kg Dkodpfx Aozk Nrbeg Ijt Prieinamumas: iškart Sandėlio vieta: 63934 Röllbach

Būklė: naudotas, Exhibition machine Condition: like new Scope of delivery: - Equipment case - Device - Operating manual - Bit This item is an unused exhibition unit. Dkodezk Nkwspfx Ag Ijt

Būklė: naudotas, 4 galvučių gręžimo staklės / 4 galvučių popieriaus gręžimo staklės, gamintojas „Nagel Citoborma 480 AB“. Dedpfxezyu Ims Ag Iskt

Būklė: naudotas, Naudota mašina Baldų furnitūros gręžimo įrenginys Sunkčių vyriaių gręžimo mašina (gręžimo šablonas Grass) Dkodpjzlbrcjfx Ag Iet 6 gręžimo velenai eilėje (žingsnis 32 mm) (iš 8 velenų gręžimo galvos viena velenas sugedęs) 4 papildomi gręžimo velenai priekyje puodelių gręžimui Pneumatinis spaustuvas, ribotuvas, giluminio gręžimo nustatymas Jungtis: 16 A / 380 V Variklis: 1,5 kW Svoris apie 100 kg Matmenys: 3130 x 1060 x 710 mm Prieinamumas: greitai Sandėlio vieta: Flörsheim

Būklė: naudotas, Gamybos metai: 1998, Naudota mašina Dkodjzk Nzpopfx Ag Ijt Pagaminimo metai: 1998 Šia mašina galima gręžti kampus, viršutinius ir apatinius kraštus bei įtvirtinti alyvinius elementus atskiruose arba supresuotuose rėmo medienos elementuose. Matavimas atliekamas įleidžiant medieną, 8 sustabdymo taškai kampams ir viršutiniams kraštams, taip pat įleidžiamajai medienai ir atraminiams elementams, automatiškai aktyvuojami, kai mediena yra padėta. Mašina turi automatinę programą, su elektriniu valdymu gręžimo varikliams, aktyvuojama paspaudus saugos pedalą. Pneumatikos jungtis R 1/4, 5–6 bar. Siurbimo greitis: 25 m/s. Siurbimo antgalio skersmuo: 120 mm. Elektros prijungimas: 0,75 kW. Reikalingas plotas: 2950 x 650 x 1100 mm. Prieinama: per trumpą laiką. Sandėlio vieta: Flörsheim.

Būklė: naudotas, Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, - pagaminimo metai 2018 - pilnai veikiantis - pagaminta Lenkijoje Dedpew Iqdzsfx Ag Iskt - naudojimo instrukcija, CE sertifikatas TECHNINIAI DUOMENYS: - keturi gręžimo agregatai - ilgų ir trumpų detalių gręžimas - pirmasis gręžimo agregatas – penki grąžtai - antrasis gręžimo agregatas – penki grąžtai - trečiasis gręžimo agregatas – penki grąžtai - ketvirtasis gręžimo agregatas – šeši grąžtai - agregatų reguliavimas į dešinę/į kairę - trys horizontalūs pneumatiniai prispaudėjai - trys vertikalūs pneumatiniai prispaudėjai - vienas centrinis pneumatinis prispaudėjas - variklio apsukos – dešinės 3000 aps./min. - variklio galia 5 kW - veleno eiga apie 160 mm - stalo aukštis, darbinis lygis apie 1000-1080 mm - vardinė įtampa 3x400 V - oro slėgis 6 bar - oro suvartojimas 10 Nm3/val. / 2m3/val./ Išmatavimai: - ilgis 2300 mm - plotis 1700 mm - aukštis 1500 mm - svoris 750 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 1974, X ašies eiga: 4 600 mm, Y ašies eiga: 3 000 mm, padavimo ilgis W ašis: 2 000 mm, ašies skersmuo: 160 mm, stalo apkrova: 25 000 kg, CNC gręžimo ir frezavimo staklės – „Scharmann“ Gamintojas: „Scharmann“ Modelis: WFT 160 (pagamintos 1970-ųjų pradžioje) Dkjdpfxszvw Iho Ag Ist Valdymo sistema: „Bosch CC300“ Darbinis stalas: 2000 x 2500 mm Stalo išilginis eigos diapazonas: 4600 mm Stalo skersinis eigos diapazonas: 2000 mm Veržlės vertikalus eigos diapazonas: 3000 mm Maksimali stalo apkrova: 25 tonos

Būklė: naudotas, Techniniai duomenys: Verpiklių skaičius: 27 Atstumas tarp pirmojo ir paskutinio grąžto: 832 mm Atstumas tarp atskirų verpiklių centrų: 32 mm Gręžimo gylio reguliavimas: 0–80 mm Pneumatinių prispaudėjų skaičius: 3 Darbinis slėgis: 6–8 bar Grąžtai tvirtinami greitojo tvirtinimo įtaise Verpiklių sukimasis pneumatiniu būdu Variklio galia: 1,8 kW Gamintojas: Vitap Dkedpjzvmvhofx Ag Iet Bendri matmenys: Ilgis: 1260 mm Plotis: 930 mm Aukštis: 1330 mm

Būklė: labai geros būklės (naudotas), Motor power: 1.2 HP, 400 V, 50 Hz Speed: 2800 rpm Drill table size: 650 x 330 mm Cross adjustment: 300 mm Longitudinal adjustment: 150 mm Height adjustment: 170 mm Table height: 880 mm Weight: approx. 280 kg Dkodpsvzramjfx Ag Ist

Būklė: naudotas, Gamybos metai: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Travel of X axis mm 750 Max. traverse speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles Quantity 7 (4X-4Y, one shared) Horizontal spindles (Y axis) Quantity 2 (1+1) Horizontal spindles (X axis) Quantity 1 Fixed grooving saw (direction) X Saw blade diameter mm 100 Max. saw blade thickness mm 5 Motor output kW (HP) 1.5 (2) Spindle speed rpm 3350 Saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air velocity m/sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill shank D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1+1 drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor output 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drilling unit Workpiece positioning and aggregate drive A CNC-controlled vacuum suction system clamps and positions the workpiece sequentially under the working unit during machining. X and Y axis movement is on THK guides with transmission via reinforced toothed belts. Z axis movement is pneumatic on ball-bushing guides with positioning via adjustable stops. Positioning of working units is achieved with DC technology and drives. CNC CONTROL The control was specially developed for use in drilling and milling machines. CN - 7" color display with touchscreen functionality - Alphanumeric keyboard - Self-diagnosis and operator language-specific error or fault messages Programming - Programming via CN - automatic optimization of drilling operations - Option for panel zero-point shift - Storage and import of drilling programs via USB dongle - Import of drilling programs from external CAD/CAM software Configuration - User interface in same language as instruction manuals Graphical representation of unit configuration Vacuum suction system "B-Power" Vacuum suction cup with double vacuum connector, recommended for highly porous panels (e.g. light MDF). Machine operation interface Software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; multicore processor recommended - RAM: 1GB min., 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (The code includes a DVD for installation and a USB key) Xilog Maestro features Programming - parametric, graphical programming - Supported programming with graphics and syntax assistance for drilling operations - Ability to create and save machining macros Integrated additional functions - Self-diagnosis and operator-language error or fault messages - User interface in Dksdjvvi I Rspfx Ag Iot

Būklė: naudotas, Gamybos metai: 2002, Gręžimo galia 25 mm, griebtuvo tvirtinimas MK 3 Dkedpfx Aevvi Aujg Ist Sandėliavimo vieta: Nattheim

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, Vidaus prekės numeris: 26080 Stalinis gręžtuvas Djdpfx Aezxxkpeg Iskt „Maxion BTB18 STP“ Pagaminimo metai: 2015 Veleno tvirtinimo lizdas: MK2 Puikiai prižiūrėtas, iš mokomosios dirbtuvės! Staklės yra visiškai veikiančios ir, susitarus, gali būti apžiūrimos prijungus prie elektros, daugiau nei 500 m² ploto šildomame sandėlyje.

Būklė: beveik kaip naujas (naudotas), Giluminio gręžimo staklės yra 6 velenų ir labai geros būklės! Gręžimo velenų skaičius: 6 Gręžimo būdas: BTA Gręžimo skersmuo: apie 16-22 mm Didžiausias gręžimo gylis: 1000 mm Dkedeb Naclepfx Ag Ijt Taip pat dirbame kaip kompetentingi giluminio gręžimo, tekinimo, frezavimo ir suvirinimo paslaugų teikėjai. Mielai pateiksime Jums pasiūlymą! Šiuo metu siūlome specialią kainą!

Būklė: naudotas, Gamybos metai: 2018, 1 unit CNC-controlled drilling, gluing and dowel inserting machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz, complete in standard configuration with: - Linear guide support consisting of: 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. reinforced blow-out, gluing and dowel inserting station for 8 mm diameter dowels, dowel length 30 mm - Fully automatic, electronically controlled centralized lubrication - X-axis NC controlled, with working length 1,300 mm, max. travel speed 78 m/min - Z-axis, position programmable over support table 5-40 mm, with option for NC-controlled Z-axis - Dowel insertion projection 7-20 mm, programmable with option of NC-controlled Y-axis Drilling depth from 0-35 mm (with drill length total 70 mm) is automatically set with dowel protrusion - Enclosed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 liters of water - Indicator lamp for glue level in glue container - 1 pc. side fence left, 1 pc. side fence right, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10°, for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection diameter 80 mm - 1 pc. TCT control with: integrated industrial PC, incl. Beckhoff TWINCAT Soft PLC, operating temperature range 0-50°C, 15" resistive TFT industrial touchscreen display, 1024 x 768 resolution, 2 GHz CPU, 256 MB RAM, 2x network interfaces, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with absolute, relative, or grid dimensioning, automatic workpiece mirroring and process optimization, 4 work zones assignable with different programs, graphical workpiece display, parametric programming, zero-point shifting, programmable job lists, plain text error diagnosis OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 4 additional vertical angled clamping cylinders 10° with bracket (total 8 clamping cylinders) Dedpfx Agjxwaz Hj Ijkt - Surcharge for machine bed length 1,800 mm with working length 1,800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm (Standard working length not reduced) - 1 NC-controlled Y-axis, with ballscrew and dynamic travel speed 300 mm/sec. Via software, programmable dowel insertion projection 7-30 mm and drilling depth 0-42 mm (with drill length total 77 mm) for vertical drilling unit from above, Y-axis position 5-42 mm - Surcharge for NC-controlled Y-axis position 5-62 mm instead of 5-42 mm - Surcharge for: 1 vertical drilling unit from above, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm, Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K