Ciklo režimu veikianti postformingo mašina

Brandt PF 20/31

Būklė: naujas, Gamybos metai: 2025, CASADEI PFS 520 - Surface & Thickness Planer with 520 mm Planing Width and Motorized Thickness Table Adjustment Robust Cast Iron and Steel Construction Large, ribbed surfacing tables made from annealed cast iron to prevent warping Smooth, quiet operation due to heavy machine weight Four feed speeds Motorized thickness table adjustment with two speeds and digital display Segmented pressure bars at the infeed Hodpfsbxz S Hox Aqujfn Precision-mounted 4-knife cutterblock Helical steel feed roller for particularly uniform and gentle wood infeed Outfeed roller with rubber coating Large adjustable fence, tilting from 90° to 45°, easily readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa Cutterblock Quick knife change in seconds On machine start, the knives are automatically tensioned by centrifugal force – self-locking The knife projection is automatically set without adjustments or screws The surfacing table is adjusted via a robust and precise parallelogram system, ensuring consistent distance between the table lips and cutterblock in all positions The sturdy aluminum fence is anodized as standard, easily adjustable, and provides a large support surface The adjustable tilt from 90° to 45° is easily readable from the workstation Standard with auxiliary fence for safe planing of narrow workpieces Image shows optional equipment The extraction port is always in the same position for both surfacing and thickness planing Thus, no extra hose or cumbersome switching or routing around the machine is required. Technical Data Total length of surfacing tables 2300 mm Infeed table length 1180 mm Planing width 520 mm Fence dimensions 1200 x 190 mm Fence tilt range 90 - 45° Min./max. planing height 3/250 mm Cutterblock diameter/number of knives 100 mm / 4 pcs Feed speeds 5/8/12/18 m/min Cutterblock speed 5000 rpm Motor power 400 V / 50 Hz / S6 Extraction port diameter 120 mm Weight 1020 kg Top machine Location: Bitburg – immediately available

Gamybos metai: 2002, būklė: dilaminuotas dirbtuvėje (naudotas), Fully Automatic Finger Jointing Line: Type Doppel-Pack with Automatic Feeding with Multiple Cross-Cut Saw with Stacking Unit Specification: Wood Infeed Length: min. 150 mm max. 1000 mm average 400 mm Wood Cross-Section: min. 20 x 40 mm max. 80 x 180 mm Hsdpfx Ajg D Ugkjquofn Wood Outfeed Length: 6030 mm Max. Wood Cross-Section with 10 mm Finger Length: Hardwood 120 cm² Softwood 150 cm² Finger Joint configuration: vertical and horizontal Type of Glue: PVAC white glue, double-sided glue application Electrical Power: Connection Voltage: 400 V Control Voltage: 24 V 50 Hz System completely wired up to the control cabinet. Finger length, possible wood cross-section, and glue type can still be adapted. Performance: 6 milling tables/min Working Height: 960 mm Table Width: 600 mm Glue Application: double-sided application Technical Parameters: Input Material: Input Length of Parts (min. - max.): 150-1000 mm Part Width (min. - max.): 40-155 mm Part Thickness (min. - max.): 20-80 mm Working Height: 960 mm Bundle Width: 600 mm Glue Application: double-sided application

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Point-to-point CNC drilling machine MASTERWOOD SPEEDY 207 used machine for custom-made furniture production, kitchen furniture, bathroom furniture, and various applications Drilling head with 5 independent vertical chucks and 1 double horizontal chuck Saw for longitudinal cuts Machine table with a drilling capacity of 1390 x 750 mm and two lateral elevating stops controlled by the control unit, enabling the processing of panels up to 2800 x 750 mm with just one program and an intermediate stop Capability to drill panels up to 2800 mm length Pneumatic tool displacement 60 mm Max. panel thickness 50 mm Spindle speed 4,500 rpm Hsdswd Irvjpfx Aqusfn Saw rotation speed 6,000 rpm Vacuum pump motor 1.5 HP Suction cup diameter 80 mm Front stop equipped with 4 locking cylinders for drilling narrow workpieces and strips Multitasking control unit with interactive graphical programming, 9-inch display, drilling programs, working cycle optimization, graphical, parametric, and diagnostic modes Overall dimensions – machine: 2500 x 1800 x 1800 h mm – Weight 850 kg Overall dimensions – control panel: 800 x 520 x 1200 mm – Weight 120 kg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: Hfodpfx Aqoh Ek Daoujn - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: naudotas, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC control: HEIDENHAIN TNC 155 Serial No. 16186651 Year of manufacture: 1986 Spindle mount: FEHLMANN SF32 Drilling capacity: Ø 30 mm in steel Thread cutting up to M20 in steel Travel paths: X: 850 mm, Y: 435 mm Quill stroke (Z): 210 mm Vertical travel of milling head: 580 mm Feed rate X and Y: 1 to 8000 mm/min Feed rate Z: 1 to 4000 mm/min Rapid traverse X and Y: 8 m/min Rapid traverse Z: 4 m/min Table clamping area: 1570 x 500 mm Distance spindle nose - table: 130 - 720 mm Distance spindle – column: 450 mm Spindle speed: 50 - 7100 rpm, stepless Spindle drive: 10 kW Total connected load: 20 kW Power supply: 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3-axis control: X, Y, and Z quill adjustment - Hydro-mechanical tool clamping FEHLMANN SF32 Hedpfxjhik Ezs Aqusfn - Thread cutting device - Cable remote control for machine operation and axis movements - Motorized vertical movement of milling head with cut-off via adjustable cams - 3D probe RENISHAW, type MP 11F with FEHLMANN SF32 holder - 20 tool holders FEHLMANN SF32 - Swiveling tool carrier with 21 tool stations - Coolant system integrated in machine base - Control cabinet fixed to the machine - Documentation: operating manual, control manual, and electrical diagrams Required space (L x W x H): 2350 x 2000 x 2300 mm Weight: 3.2 tons Very good condition

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2017, Kaum gebrauchte UV-Linie für Platten oder Fußböden Hjdpfov Ux R Sox Aquefn

Būklė: geras (naudotas), Gamybos metai: 1989, Funkcionalumas: nepatikrintas, darbinis plotis: 220 mm, obliavimo aukštis: 120 mm, ašies skersmuo: 50 mm, obliavimo plotis: 220 mm, darbinio aukščio: 120 mm, bendras svoris: 7 500 kg, veleno greitis (maks.): 6 000 aps./min, veleno greitis (min.): 6 000 aps./min, aukščio reguliavimo tipas: elektrinis, įvesties srovės tipas: trifazis, ašies skaičius: 10, galia: 105 kW (142,76 AG), įėjimo dažnis: 50 Hz, Įranga: kabina, variklio stabdis, Weinig Hydromat 22 B With grooved bed 10 spindles, Working width: 220 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 8-40 m/min, Spindle arrangement: 1-Bottom (7.5 kW) - with hydro clamping 2-Right (7.5 kW) 3-Left (11 kW) 4-Right (7.5 kW) - with straight jointer Hfodpfxou Udd Ss Aqujn 5-Left (7.5 kW) 6-Top (15 kW) - with hydro clamping 7-Bottom (7.5 kW) - with hydro clamping 8-Top (7.5 kW) - with hydro clamping and straight jointer 9-Bottom (7.5 kW) - with hydro clamping and straight jointer 10-Universal (7.5 kW) 6 powered rollers in the table

Būklė: labai geros būklės (naudotas), 4-sided DOUBLE END TENONER LINE currently configured for INTERIOR DOORS, consisting of the following machines: X10023A) CELASCHI powered roller conveyor for feeding X10023B) CELASCHI DOUBLE END TENONER Model TSA 3 B 480 A installed total power: 65 kW X10023C) CELASCHI 90° transfer (L-shaped powered roller conveyors) Hfodpfxjwzmbqo Aquon X10023D) CELASCHI DOUBLE END TENONER Model TSA 2 B 360 installed total power: 65 kW

Gamybos metai: 1987, būklė: paruoštas naudoti (naudotas), A four-sided planer Weinig, including automation, double cross-cut saw, infeed and extraction system, is available. 1) Four-sided planer Weinig Hydromat 22 BL with automatic lubrication, year of manufacture: 1987, working width: 220 mm, working height: 140 mm, number of heads: 7, head arrangement: bottom/right/left/right/top/bottom/bottom, spindle diameter: 50 mm. 2) Kellfass automation unit consisting of a double cross-cut saw, length: 5000 mm, buffer cross conveyor and pneumatic roller infeed. An on-site inspection is possible. Hfodpfx Aqjv T Apceusn

Būklė: naudotas, Gamybos metai: 2024, spalva: pilka-juoda, tuščias svoris: 3 kg, kuro tipas: benzinas, pavaros tipas: mechaninis,