Berg & Schmid Dgs 500/600 Ha-I pirkti naudotą (79 508)

Būklė: naujas, Cutting capacity at 90 degrees: round 500 mm Cutting capacity at 90 degrees: square 420 mm Cutting capacity at 90 degrees: rectangular 600x400 mm Saw blade length: 5320x34x1.1 mm Blade speed: 15 - 100 m/min Table height: 805 mm Total power requirement: 3.0 kW Machine weight: approx. 1.45 t Space requirements: approx. 1.72 x 2.5 x 2.5 m Double mitre band saw, hydraulic semi-automatic, DGS 500/600 HA-I • Mitre left & right 60° • Frequency-controlled saw drive • 34 mm band height • Wear-free, ball-bearing material support turntable • Saw blade guides can be positioned on extra-wide linear guides • Heavy-duty, robust gearbox • Large clamping plates • 2 integrated support rollers left and right • Removable swarf tray (for cleaning) • Free-standing, safe and ergonomic control panel • Storage space for bands and consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Super-fast clamping (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range (round) from 10 mm Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid lowering to material start, or in series cuts, begin cutting immediately 4. Stop saw blade 5. Raise frame just above material Kdjdpsupxupsfx Aaujk 6. Open vice

Būklė: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 450x320 mm Saw band length 4250x34x1.1 mm Kdedpfxjfgyico Aauok Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitre cutting left and right 60° without machine conversion · 34 mm saw band width · Large material support turntable, ball bearing mounted · Saw band guides positioned via extra-wide linear guides · Heavy-duty, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Free-standing, safe and ergonomic control console · Storage space for saw bands and consumables · Cutting pressure and feed rate regulator · Fully hydraulic vice · Super-fast preclamp (front loading) · Material height sensor (automatic cut-start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid lower feed to material or start cutting for serial cuts 4. Stop saw band 5. Raise frame just above material 6. Release vice Optimal, material-independent cutting results through fine adjustment of the saw frame using: * Pressure control valve (cutting pressure-force) * Feed control valve (speed) * Switches with pictograms, easy and clear to operate

Būklė: naujas, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Koded Iipxopfx Aaujdk Cutting capacity at 90°: rectangular 350x200 mm Saw blade length 3375x27x0.9 mm Blade speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double mitre metal bandsaw, hydraulic semi-automatic GBS 305 HA-I Easy - Mitre cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulic vice, laterally adjustable - Robust, large material support - Automatic coolant system

Būklė: naujas, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350x200 mm Saw blade length: 3375x27x0.9 mm Blade speed: 18 - 100 m/min Table height: 940 mm Total power requirement: 1.5 kW Machine weight: approx. 0.65 t Space requirement: approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double mitre metal band saw, semi-automatic hydraulic model GBS 305 HA-I Easy - Mitre cuts up to 60° left and 45° right - Material height sensor - Ball bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system Kjdpfxsfgyiao Aaujdk

Būklė: naujas, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.35 t Space requirement: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic, equipped with: - Hydraulic vise - Material height sensor - Cutting control via ammeter - Cutting pressure feed regulator - Blade speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented ball-bearing turntable for easy miter adjustment - Movable quick-release vise - Quick-release lever Ksdpfofgyh Sex Aausdk - Automatic coolant system

Būklė: naujas, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Bandsaw K-tech DG 62/45 HA-I • 2-column miter saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation due to inclined cutting, feed rate and cutting pressure control • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning) • Energy-efficient and low-vibration operation through inclined cutting Kodpfx Aaod Iipmjuedk • Ergonomic, safe, and freestanding control panel • Frequency-controlled saw drive 15 - 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-diameter flywheels (520 mm) • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid downfeed to start of material or cut immediately for serial cuts 4. Saw blade off 5. Raise frame just above the material 6. Vise opens

Būklė: naujas, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 500 x 310 mm Blade speed 15 – 100 m/min Table height 844 mm Saw blade dimensions 4250 x 34 x 1.1 mm Total power requirement 2.2 kW Machine weight approx. 1.2 t Space requirement approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double mitre bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Sturdy, yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cutting, feed regulator + cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning/disinfection) • Energy-saving and low vibration thanks to angled cutting • Ergonomic, safe, and free-standing control panel • Frequency-controlled saw drive 15–100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LED indicators for monitoring all safety functions • Large-dimensioned drive wheels (520 mm) • Clear and precise mitre adjustment up to 60° Semi-automatic function: 1. Clamp material Kedpfx Aaofg E Hlouodk 2. Start saw 3. Rapid lowering to the beginning of the material or direct cutting in series cuts 4. Switch off saw blade 5. Raise frame just above the material 6. Open vise

Būklė: naujas, Cutting diameter: 255 mm Saw blade length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Speed: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight approx. 450 kg Space requirement approx. 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double-mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts: left 60° and right 45° • Material height sensor (automatic cut start detection) • Monoblock frame and gearbox for extremely quiet and low-vibration operation • Hydraulic vice, laterally adjustable • Precision industrial bearings • Heavy-duty vice and machine castings • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter Kdjdofn Andepfx Aauek • Feed pressure regulator • Support roller (material infeed side) • Ball-bearing mounted rotating table Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid descent to beginning of the material or, for serial cutting, cut immediately 4. Stop saw blade 5. Raise frame just above the material 6. Open vice

Būklė: naujas, Cutting range at 90°: round 310 mm Cutting range at 90°: square 280 mm Cutting range at 90°: rectangular 400x250 mm Saw blade length: 4020x34x1.1 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.68 t Space requirement: approx. 1.5 x 1.78 x 1.3 m SPECIAL PRICE!!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • Mitre left 60° + right 45° • Powerful industrial hydraulics, 18 bar • Optimal material access • Ammeter for monitoring: - Cutting force optimization - Blade life monitoring - Cutting process control • Vise opens/closes hydraulically • Swarf cleaning brush • Ball bearing-supported material turntable • Moveable quick-action vise • Material height sensor (automatic cut-start detection) Semi-automatic operation: 1. Clamp material 2. Start saw Ksdpfod Iiptsx Aaujdk 3. Quick downfeed to material start or for serial cuts directly start sawing 4. Stop saw blade 5. Raise frame to just above material 6. Open vise

Būklė: naujas, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangle 290 x 210 mm Saw blade length 2,965 x 27 x 0.9 mm Table height 940 mm Blade speed 35 / 70 m/min Total power requirement 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic, equipped with: - Hydraulic vice Kdsdpfx Aasd Iip Rsuok - Material height sensor - Cutting monitoring via ammeter - Cutting pressure feed regulator - Blade speed 34 / 74 m/min - Mitre cuts up to 60° to the left and 45° to the right - Patented, ball-bearing turntable for easy mitre adjustment - Quick-release movable vice - Quick-action clamping lever - Automatic coolant system Shipping cost share: 120 EUR

Būklė: naujas, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangle 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Kdodpfx Ajfgyh Usaujk Band speed: 18 - 110 m/min Total connected load: 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL OFFER PRICE!!! Double-mitre metal bandsaw, frequency inverter, hydraulic semi-automatic, type GBS 250 Super HA-I Easy • Mitre cuts: left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast as a single piece – very quiet operation with minimal vibrations • Hydraulic vise, laterally adjustable • Guided, high-quality industrial bearings • Heavy-duty vise and machine base casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Infeed support roller • Ball bearing turntable Semi-automatic operation sequence: 1. Clamp the material 2. Saw start 3. Rapid downfeed to material start, or cut immediately for serial cutting 4. Switch off saw band 5. Raise the frame to just above the material 6. Open the vise

Būklė: naujas, Cutting diameter: 305 mm Saw band length: 3375 mm Cutting width: 350 mm Saw band dimensions: 3375 x 27 x 0.9 mm Cutting capacity at 90° round: 305 mm Cutting capacity at 90° square: 260 mm Cutting capacity at 90° rectangular: 350 x 200 mm Cutting capacity at 45° round: 250 mm Cutting capacity at 45° square: 230 mm Cutting capacity at 45° rectangular: 230 x 200 mm Kdedpfx Aaju Dbvtjusk Cutting capacity at 60° round: 175 mm Cutting capacity at 60° square: 155 mm Cutting capacity at 60° flat: 170 x 100 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.7 t Space requirement: approx. 1.5 x 1.8 x 1.9 m - Mitre cuts up to 60° left and 45° right - Material height sensor - Ball bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Būklė: naudotas, Saw blade diameter: 400 mm Cutting capacity at 90 degrees (round): 110 mm Cutting capacity at 90 degrees (square): 100 mm Cutting capacity at 90 degrees (flat): 200x60 mm Cutting capacity at 45 degrees (round): 100 mm Cutting capacity at 45 degrees (square): 100 mm Cutting capacity at 45 degrees (rectangular): 140x60 mm Total power requirement: 1.5 kW Machine weight: approx. 130 kg Kodpfx Aasd Iinxeuodk Dimensions (L x W x H): 0.8 x 0.7 x 1.3 m SPECIAL PRICE!! Underfloor aluminium circular saw, hydro-pneumatic semi-automatic. • Service unit for pneumatic control • Ball-bearing turntable • Suction nozzle for chip extraction system • 2 pneumatic vertical clamps • Swivel range: 180° • Adjustable rear material stop = expandable cutting range • Infinitely variable saw blade feed • Two-hand safety control • Horizontal clamping units (optional) • Mist spray device for coolant emulsion • Motor brake • Machine base frame • For profile cutting, use of our B & S Coolmatic Plus is mandatory • Saw blade optional

Būklė: naudotas, Saw blade diameter 530 mm Cutting range at 90 degrees: round 180 mm Cutting range at 90 degrees: square 170 mm Cutting range at 90 degrees: flat 380x70 mm Cutting range at 45 degrees: round 180 mm Cutting range at 45 degrees: square 150 mm Cutting range at 45 degrees: flat 290x70 mm Total power requirement 2.2 kW Machine weight approx. 350 kg Dimensions (L x W x H): 1.1 x 0.9 x 1.5 m Underfloor aluminium circular saw, hydro-pneumatic semi-automatic. · Maintenance unit for pneumatic control · Ball bearing rotary table · Chip extraction connection · 2 pneumatic vertical clamps · Swivel range 180° · Adjustable rear material stop = extendable cutting range · Infinitely variable saw blade feed · Two-hand safety control · Horizontal clamps (optional) · Coolant mist spray device · Motor brake · Machine base frame Kedpjd Iinwsfx Aauedk · For profile cutting, use of our B & S Coolmatic Plus is mandatory · Saw blade optional

Būklė: naujas, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting diameter flat: 300 x 260 mm Saw band length: 3920 x 34 x 1.1 mm Table height: 780 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m Ksdpfx Aasxfwbtoujdk Unused demonstration machine!!!!! 2-column high-performance bandsaw automaton of the SBS series • Modern SNC 20 control unit in CNC version • Frequency-controlled saw drive • Work lamp • Powered chip brush • Hydraulic band tensioning • Clamping pressure regulation • Double vice (before and after the band) • Creep mode for positioning • Bundle clamping electrically and hydraulically prepared • Chip conveyor The SNC 20 control allows for convenient and straightforward input of up to 20 different sawing tasks (length and quantity). When the target dimension is entered, the control automatically calculates the trim cut and the number of feeds. The error code display system also provides for rapid troubleshooting and error analysis. Including band run monitoring (EUR 1,800)

Būklė: naujas, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting diameter flat: 300 x 260 mm Saw band length: 3920 x 34 x 1.1 mm Table height: 780 mm Band speed: 20 - 100 m/min Kdsdpfx Aaofb Nbfsusk Total power requirement: 3.7 kW Machine weight approx.: 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Automatic Machines of the SBS Series The SBS series convinces with its advanced technology, high quality, durability, and an unrivalled comprehensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tension • Clamping pressure regulation • Double vise (in front of and behind the blade) • Creep speed for positioning • Bundle clamping, prepared for electrical and hydraulic operation • Chip conveyor The SNC 20 control system allows convenient and intuitive input of up to 20 different sawing jobs (length and quantity). When entering the target dimension, the control automatically calculates the kerf and the number of feed movements. Additionally, the fault code display system provides fast analysis for error correction.

Būklė: naujas, Cutting diameter round: 330 mm Cutting diameter square: 330 mm Cutting diameter flat: 400x330 mm Saw blade length: 4570 x 34 x 1.1 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 2.35 t Dimensions (L x W x H): 2.23 x 2.15 x 1.8 m SPECIAL OFFER PRICE!!!! 2-column high-performance bandsaw machines from the SBS series The SBS series impresses with advanced technology, high quality, long service life, and exceptionally comprehensive standard equipment. • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tensioning • Adjustable clamping pressure • Double vice (before and after the blade) • Creep mode for positioning • Bundle clamping prepared for electric and hydraulic operation • Chip conveyor The SNC 20 control allows convenient and straightforward entry of up to 20 different sawing tasks (length and quantity). When entering the desired dimension, the control automatically calculates the cutting allowance and the number of feed cycles. In addition, the error code display system enables quick Kedpfx Asfb Nbgjaujdk diagnosis for troubleshooting.

Būklė: naujas, Cutting diameter round: 460 mm Cutting diameter square: 460 mm Cutting diameter flat: 460 x 460 mm Kdedpfx Asfg E Hvjauek Saw band dimensions: 5450 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight approx. 3.2 t Dimensions (L x W x H): 2,675 x 2.15 x 2.05 m SPECIAL OFFER PRICE!!!! 2-column high-performance bandsaw machines from the SBS series The SBS series stands out through advanced technology, premium quality, durability, and an unparalleled comprehensive standard configuration. • Modern SNC 20 control system in CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light included • Powered chip brush • Hydraulic blade tensioning • Clamping pressure regulation • Double vice (before and after the saw blade) • Inch mode for positioning • Electrical and hydraulic bundle clamping provision • Chip conveyor The SNC 20 control system allows easy and straightforward input of up to 20 different sawing tasks (length and quantity). When the desired length is entered, the control system automatically calculates cutting allowance and the number of feed cycles. The error code display system also allows for quick fault analysis and troubleshooting.

Būklė: naujas, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 480 mm Kedpfx Ajfu Nbbeausdk Cutting capacity at 90 degrees: rectangle 610 x 450 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 820 mm Total power requirement: 3.0 kW Machine weight approx. 2.3 t Space requirement approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic mode and up to 60° to the left in semi-automatic mode Material height probe (automatic cut start detection) Automatic feed unit via ball screw spindle, incremental feed with automatic length compensation Probe on the saw blade for automatic adjustment of the saw stroke Fully automatic control of saw frame and clamping device Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush, feed clamping vice opening on both sides Remnant piece length 100 mm Modern CNC control, freely programmable for multiple sawing jobs with various cut lengths and quantities. Automatic feed unit 500 mm via ball screw spindle, incremental feed with automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm. Fully hydraulic control of the saw frame and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Būklė: naujas, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangle 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 870 mm Blade speed: 18 – 110 m/min Control system: CNC Total connected load: 1.5/1.8 kW Machine weight approx.: 0.63 t Kjdpfx Aasd Iipzoujdk Space requirement approx.: 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic GBS 255 Super VA-I CNC • Mitre left 45°: fully automatic operation • Mitre left 60°: semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting: very quiet, low vibration cutting • Removable chip tray (cleaning/disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High-performance positioning with incremental encoder (CNC) • Top access to saw, material, and feed unit • Folding safety cover • Fine adjustment of feed rate • Semi-automatic cut! • Optimize workflows with CNC control Input options for various parameters such as quantities and material lengths, automatic calculation of the kerf • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g., one cutting program with multiple cut lengths • Automatic feed unit (CNC) via ball screw spindle with incremental feed and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, residual piece length 170 mm.

Būklė: naujas, Cutting capacity at 90°: round 310 mm Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangle 400 x 250 mm Saw band length: 4020 x 34 x 1.1 mm Band speed: 18 - 100 m/min Table height: 890 mm Total power requirement: 2.2 kW Machine weight: approx. 0.99 t Space requirements: approx. 1.85 x 2.2 x 2.0 m Mitre band saw, fully automatic, GBS 310/400 VA-I CNC Kodjd Iiprspfx Aausdk • Mitre cut left 45° automatic operation • Mitre cut left 60° semi-automatic operation (manual cuts without programming) • Material height sensor (automatic detection of cut start) • Frame and gearbox cast as one piece, very quiet operation and minimal vibrations • Removable chip tray (for cleaning) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material, and feed unit • Safety cover foldable • Fine adjustment of feed • Semi-automatic cutting! • With CNC control for workflow optimization Input options for parameters such as quantities and material lengths, automatic deduction of kerf • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g. one cutting program with diverse section lengths • Automatic feeding unit (CNC) via ball screw, incremental feed with automatic length compensation. Adjustable for section lengths from 2 mm to 9,999 mm, minimum end piece 170 mm.

Būklė: naujas, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 870 mm Blade speed: 18 - 110 m/min Total power requirement: 1.5 / 1.8 kW Machine weight approx. 0.63 t Space requirement approx. 1.8 x 1.85 x 1.85 m Mitre Band Saw, Fully Automatic GBS 250 Super VA-I MPS • Mitre left 45°, automatic operation • Mitre left 60°, semi-automatic operation    (Cuts without programming) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Material height sensor (automatic detection of cut start) • Frame and gearbox made from a single casting, very quiet operation, minimal vibration • Removable swarf tray (for cleaning/disinfection) • Excellent accessibility to saw, material, and feed unit • Hinged safety cover • Fine adjustment for feed rate • Semi-automatic cutting! Automatic sawing with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after input of desired quantity and length: material approach, cutting operation, and piece counting until program completion • MPS control enables input of the desired number of feed strokes • All essential machine data is displayed on the LED display during the cutting process (power consumption, cutting time, piece count) • Entered data are stored in RAM memory • The self-diagnostic circuit automatically displays all irregularities as error messages and monitors the entire process • Floating-mounted feed unit Kedpfx Aaod Iip Ajuodk • Length setting via handwheel and vernier scale with mechanical position indicator.    Adjustable for cut lengths from 2.5 mm to 420 mm, or repeatable 1–29 times through reversing automation; remnant piece length 210 mm

Būklė: naujas, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Ksdpfx Aajupw R Ajusdk Saw blade length 3375 x 27 x 0.9 mm Blade speed 18 - 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirement approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox cast in a single piece, very quiet and low-vibration cutting • Removable chip tray (designed for cleaning/disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material and feed unit • Foldable safety guard • Fine feed rate adjustment • Semi-automatic cutting! • CNC control for optimized workflows Allows input of various parameters such as quantities and material lengths, automatic calculation of the kerf • CNC control for 10 different sawing programs with 99 sub-programs for various lengths and quantities, e.g. one sawing program with multiple cut lengths • Automatic (CNC) feed unit via ball screw with incremental feed and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, minimum remnant length 170 mm. Including: - Micro-spraying device - Leveling elements

Būklė: geras (naudotas), Gamybos metai: 2011, From company closure: Berg und Schmid VKS 370 HA Year of manufacture: 2011 Semi-automatic 4-meter roller conveyors left and right Left stop with digital length measurement system, adjustable via handwheel Cutting capacity with 370 mm saw blade: Round: 120 mm – Square: 100 mm – Rectangle: 180x100 mm at 90° At 60°: Round: 110 mm – Square: 90 mm – Rectangle: 90x100 mm Kodpfxjwa Ecqs Aaujdk Mitre cuts: left up to 60°, right up to 45° Saw blade bore: 40 mm Saw blade speed: 15–70 rpm 380 Volt Coolant pump Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Fast lowering to start of material or direct cutting in series mode 4. Saw band off 5. Raise frame just above material 6. Open clamping vice

Būklė: naujas, Saw blade diameter: 370 mm Cutting capacity at 90 degrees (round): 120 mm Cutting capacity at 90 degrees (square): 100 mm Cutting capacity at 90 degrees (rectangular): 180x100 mm Working height: 925 mm Saw blade speed: 15+30 or 30+60 rpm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.44 t Space requirement: approx. 0.8 x 1.1 x 2.1 m SPECIAL OFFER PRICE!!! High-performance vertical circular saw, hydraulically-pneumatic semi-automatic. (20185/20188) · Mitre cutting: left 60° / right 45° · Vise with double clamping arm · Robust prism guide for saw head, dovetail guides adjustable · Chip brush · Automatic cooling system · Metal tension wheel for high power transmission · Heavy-duty cast table Semi-automatic operation: Ksdpfx Aasd Iin Isusdk 1. Clamp material 2. Start saw 3. Rapid approach down to start of material or, for series cuts, cut directly 4. Saw band off 5. Raise frame just above material 6. Open vise MPS control: · Storage of cut start/end positions · Display of current consumption, piece count, cutting time, etc. · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price excludes saw blade! (Saw blade price: €204)